DFCM Construction - Prequalified Paving & Site Civil Stage II - Department of Health and Human Services - USDC - Site Improvements - Project #26356410

Only contractors prequalified under Stage I of the DFCM Prequalification Program are eligible to bid on this Stage II Invitation to Bid for site improvements at the Department of Health and Human Services - USDC campus in Utah. The project, identified as Project #26356410 with solicitation number CS26088, has an estimated construction cost of $1,500,000 and encompasses the removal and replacement of miscellaneous concrete elements including pavements, sidewalks, accessible ramps, curbs, and curb and gutter; expansion of existing parking areas; and installation of speed humps. Additional scope includes subgrade preparation to 11 inches below finish grade for asphalt and 12 inches for concrete, removal and disposal of trees, irrigation, and landscape features, topsoil grading, sodding, planting, and field engineering for staking concrete elements, catch basins, and drainage systems. Work must adhere to Division 01 provisions and all applicable quality assurance and testing protocols, with concrete inspection conducted by independent agencies approved by the Owner. All materials must be delivered in original manufacturer-sealed containers with intact labels and handling instructions, and no manufacturer nameplates or trademarks may be affixed to visible surfaces. Bid submission is required electronically via the U3P website by June 18, 2026, at 3:00 PM, and must be accompanied by a bid bond in the amount of five percent of the bid, on AIA Document A310-2010 form. A comprehensive list of first-tier subcontractors must be submitted within 24 hours of bid opening, with thresholds set at $20,000 for projects under $500,000 and $35,000 for this project, which exceeds the threshold. Failure to submit a compliant subcontractor list or to certify compliance with state licensing requirements will lead to disqualification. The winning bidder must furnish Performance and Payment Bonds on AIA A312-2010 forms, meet DFCM’s minimum insurance requirements including liability coverage, and comply with all OSHA 29 CFR 1926 standards for construction safety, including fall protection, hot work permits, and fire prevention. The project must fully conform to ADA standards, ANSI A117.1 accessibility codes, and applicable federal, state, and local laws. The Contractor must submit a detailed CPM schedule for the first 90 days prior to receiving