Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

DIAL

Active
SPE7L1-26-T-861SFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract entails the procurement of a single unit identified by NSN 5355-01-060-7065 and part number D627-4899-001 under solicitation SPE7L1-26-T-861S, issued by the Department of Defense’s Land Supply Chain. Delivery is mandated within 20 days after contract award, with a response deadline of August 3, 2026, and the solicitation was posted on July 22, 2026. The item is subject to MIL STD 130 for government identification marking and requires origin inspection prior to acceptance. Strict prohibitions apply regarding the use of ozone-depleting substances and intentional introduction of mercury or mercury-containing compounds into the supply, with exceptions narrowly defined for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specific chemical reagents approved by NAVSEA. Portable devices containing mercury must be shockproof and feature a secondary containment barrier per NAVSEA 5100-003D. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on acquisition size. Government identification must be removed from any non-accepted supplies. The point of contact is Kristina Derry, reachable via email and phone listed in the contract data.

General Info

Procure one unit NSN 5355-01-060-7065 delivered in 20 days, comply with MIL STD 130, mercury and ozone rules, DLA requirements.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

327999 - All Other Miscellaneous Nonmetallic Mineral Product ManufacturingView NAICS

Place of Performance

UNIT 100261 BOX 1, FPO, AE, 09514, US

Set-Aside

NONE

Documents

(1)

SPE7L1-26-T-861S.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Kristina Derry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DIAL
DIAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
DATRON SYSTEMS INC, CAGE 32255,
P/N D627-4899-001
MIL STD 130 APPLIES
ORIGIN INSPECTION REQUIRED
USE OF OZONE DEPLETING SUBSTANCES:
THIS ITEM DOES NOT REQUIRE THE USE OF CLASS I OZONE DEPLETING SUBSTANCES
PER DLA MEETING, 3-4 AUG 93, SUBJECT: DLA TECHNICAL/STANDARDIZATION
MEETING ON AUTHORITY TO IMPROVE CUSTOMER SUPPORT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
NO DATA IS AVAILABLE FOR USE IN NSN/Part Number: 5355-01-060-7065 Quantity: 1 EA Purchase Request: 7017574117QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 327999
New
DIBBS
NONMETALLIC SPECIALThis contract pertains to a nonmetallic special shaped section identified by NSN 9390-00-081-6286 with a quantity of 54 units, issued under solicitation SPE8E5-26-T-3643 by the Defense Logistics Agency through the Warner Robins office of the Department of Defense. Technical and quality requirements for this item are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with the applicable revision determined by the solicitation or award date depending on the acquisition scale. The product is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure or transfer of associated technical data to foreign persons regardless of location, with compliance mandated by DFARS 252.225-7048. Only contractors certified under the US/Canada Joint Certification Program, who have completed required DLA training and questionnaire, and received explicit approval may access the controlled data. The delivery schedule requires fulfillment within 167 days after contract award, with performance to occur at Robins AFB, Georgia. Proposals must be submitted by August 3, 2026, and the point of contact for inquiries is Nafis Beyah, reachable via email or phone.
WARNER ROBINS

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
RELEASE PLY FABRICThe contract specifies the procurement of Release Ply Fabric under solicitation SPE8E5-26-T-3651, with a total quantity of 21 reels, each reel equaling 250 yards, for a delivery requirement of 93 days after order. The material is identified by NSN 9390016537624 and must comply with all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which supersede any other standards like ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA’s Packaging Requirements for Procurement. If the material is not classified as hazardous under FED-STD-313, it must be commercially packaged per ASTM D3951 but only if not overridden by a higher-priority DLA requirement. Delivery is FOB origin, with inspection and acceptance occurring at destination, and no variance in quantity is permitted. The contract is a total small business set-aside under NAICS code 327999, with specific suppliers listed including Hawkeye International LLC, Northern Composites LLC, and Coast-Line International Distributors. The delivery destination is DLA Distribution Warner Robins at Robins AFB, Georgia, with a required ship date of July 16, 2026, and an original delivery date of February 19, 2027. Transportation details and parcel post address are provided, and the point of contact for inquiries is Nafis Beyah.
WARNER ROBINS

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
TAPE, PROTECTIVE, PLASTIThe contract specifies the procurement of 24 rolls of protective plastic tape, identified by NSN 9390016510036 and part number 1814-12, with each roll measuring 12 inches by 36 yards and packaged as one roll per unit of issue. The total quantity is divided into two line items: nine rolls for delivery to Cherry Point, North Carolina, and fifteen rolls for delivery to San Diego, California, with both shipments requiring delivery within 41 days of the ship date. The tape must comply with all DLA Packaging Requirements for Procurement, including palletization and labeling per MIL-STD-129, and packaging standards under ASTM D3951 if non-hazardous, or TQ requirement IP025 if hazardous under FED-STD-313, with DLA’s Master List of Technical and Quality Requirements overriding any conflicting specifications. Delivery is FOB origin with zero quantity variance allowed, and inspection and acceptance occur at the destination. The contract, issued under solicitation SPE8E5-26-T-3659, is a total small business set-aside with a response deadline of August 3, 2026, and is managed by the Department of Defense through the Defense Logistics Agency. The unit of issue is RO, and the pricing details are included in the contract line item numbers, though specific unit and total prices are not fully detailed in the provided text. Shipments must adhere to DLA transportation procedural notes C19 and C20, and the required delivery date for both locations is November 5, 2026, with respective ship dates of July 28 and September 17, 2026.
CHERRY POINT PHANTOM RD BLDG

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
TAPE, REFLECTIVEReflective tape meeting specified military standards is being procured under solicitation SPE8E5-26-T-3645, with a response deadline of August 3, 2026. The product is 1/4 inch wide and 50 yards long, in yellow color, and is supplied in 17 rolling units, each containing 50 yards. This item is identified by NSN 9390-00-682-6619 and is being acquired through a fully competitive process under a federal specification. The delivery must be completed within 167 days after order, with performance taking place in Tracy, California, 95304-5000. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition type. Covered Defense Information may apply, and all supplies must comply with the requirement to remove government identification if not accepted. The contracting office is DLA Dist San Joaquin under the Department of Defense, with Nafis Beyah as the primary point of contact.
DLA DIST SAN JOAQUIN

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
Federal
93--TAPE,PROTECTIVE,PLASTIThe contract is for the procurement of protective plastic tape with NSN 9390016510036, totaling 24 units across two line items, both to be delivered to DLA Distribution Cherry Point within 41 days of award. The approved source for this item is 8PGY8 1814-12, and the solicitation is issued as an RFQ under number SPE8E5526T3659, available exclusively online with no hard copies provided. This is a total small business set-aside under the NAICS code 327999, restricted to small business concerns as defined by the SBA. All responsible sources may submit electronic quotes, which must be received by the deadline of August 3, 2026. No specifications, plans, or drawings are available for this requirement. The contracting office is DLA Troop Support located in Philadelphia, Pennsylvania, and inquiries should be directed via email to the designated point of contact listed in the solicitation document.
DLA Troop Support

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
Federal
93--RELEASE PLY FABRICThe solicitation seeks 21 units of NSN 9390016537624 RELEASE PLY FABRIC under a total small business set-aside, with quotes required to be submitted electronically through the SAM.gov portal. Only approved sources—01PS4 8091-210F, 1V824 PFG STYLE 56180/40000 S&HS, and 6YD92 RELEASE PLY SUPER A—are eligible to respond, and no technical specifications, plans, or drawings are available to offerors. The contract has a firm deadline of August 3, 2026, with delivery required to DLA Distribution Warner Robins within 93 days after award. The solicitation, numbered SPE8E526T3651, was posted on July 22, 2026, and is classified as a combined action under NAICS code 327999. The contracting office is隶属于 DLA Troop Support, located in Philadelphia, Pennsylvania, with primary inquiries directed to the designated buyer email. No hard copies of the solicitation are distributed, and all submissions must be received electronically via the provided link before the stated deadline to be considered.
DLA Troop Support

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
COVER, DIALThe contract pertains to the procurement of one unit of a COVER, DIAL with NSN 5355-00-953-5506 under solicitation SPE7L1-26-T-856Z, issued by the Department of Defense's Land Supply Chain. The item is classified under NAICS code 327999 and is subject to DLA Packaging Requirements for Procurement, incorporating all applicable technical and quality standards identified by R or I numbers as defined in the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website. Compliance with these standards is mandatory, with the controlling revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The supplier must ensure the item does not contain Class I ozone-depleting substances, in alignment with DLA technical and standardization directives from a 1993 meeting. Delivery is required within five days after date of award to Hill AFB, Utah, zip 84056-5713. The primary point of contact is Kristina Derry, reachable via email and phone listed in the contract data, and responses must be submitted by August 3, 2026. No government identification is to be removed from non-accepted supplies as per regulatory protocol.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
KNOBThis contract, identified as KNOB under solicitation number SPE7LX-26-U-8891, is a total small business set-aside for the procurement of 68 units of a knob with NSN 5355-01-382-5286, requiring delivery within 88 days after award. The contract incorporates stringent technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date. Zero-tolerance policies are enforced for hazardous materials: ozone-depleting chemicals are completely prohibited, and mercury or mercury-containing compounds are banned unless specifically exempted for functional uses such as batteries, fluorescent lights, sensors, or chemical reagents approved by NAVSEA, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. All items must be asbestos-free, and any substitutions require formal approval under clause L30 and provision 4 conditions. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contract explicitly prohibits the use of government identification on non-accepted supplies and mandates full and open competition under a small business set-aside, with Theodore Misiolek designated as the primary point of contact for inquiries.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 327999
New
DIBBS
NONMETALLIC SPECIAL SHThe contract pertains to a nonmetallic special shaped section, supplied on a 25-foot coil, with a total quantity of 26 feet required under purchase request 7017561001 and NSN 9390011794508. Delivery must be completed within five days of order placement, with shipment originating FOB origin and a permitted quantity variance of plus 10 percent and no reduction. Inspection and acceptance both occur at the destination, and the item is classified as a critical application item requiring strict adherence to quality and technical standards outlined in the DLA Master List of Technical and Quality Requirements. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, using non-plastic materials where feasible to avoid environmental contamination, with specific packaging codes and methods defined to prevent distortion during transit and storage. Marking must conform to MIL-STD-129 with no special marking applied. The shipment is destined for Fort Hood, Texas, with a specified freight and markfor address tied to DLA warehouse building 89010. Transportation must use traceable, non-parcel post methods due to the RDD classification and should be dispatched promptly. The contract references defense-sensitive information and mandates removal of government identification from non-accepted supplies. The original required delivery date is July 10, 2026, with no need ship date specified. This solicitation, numbered SPE8E5-26-T-3639, was posted on July 21, 2026, with responses due by August 3, 2026, under NAICS code 327999. Primary point of contact is Nafis Beyah at the Defense Logistics Agency, and all contractual obligations are governed by the DLA’s governing policies as stipulated, including unit of issue alignment with ANSI X12 standards and compliance with all specified technical, quality, and packaging directives.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
SHEET, NONMETALLIC, PROTThe contract specifies the procurement of a nonmetallic protective sheet shaped as a special section, identified by NSN 9390015957239 and part number 6440389-01M1, with a single unit quantity to be delivered within five days of contract award. The item is classified as a Type I (Code K) shelf-life item with a strict 18-month non-extendable expiration period, and all packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, including specific preservation methods and materials. Marking must adhere to MIL-STD-129, and in addition, each palletized shipment bound for DDC depots or direct vendor deliveries to CCPs must include two 10-inch by 10-inch fluorescent yellow placards with bold black “MRAP” lettering placed at eye level on the exterior of the container. OEM-specific colored placards are authorized per manufacturer: green for BAE (TX), teal for OSHKOSH, purple for BAE (PA), orange for FPII, blue for NAVISTAR, and pink for GDLS, with deviations permitted when space constraints prevent standard sizing. The item is designated as non-hazardous, with delivery FOB origin and inspection and acceptance occurring at destination, with zero variance allowed in quantity. The shipment must be sent via traceable freight, not parcel post, to the Joint Base Lewis-McChord address, and must be accompanied by the designated transport control number. The solicitation number is SPE8E5-26-T-3636, with a response deadline of August 3, 2026, and the required delivery date is July 21, 2026. Technical and quality requirements referenced via R and I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
NONMETALLIC SPECIAL SHThis contract specifies the procurement of a nonmetallic special shaped section in a 25-foot coil configuration, with a total quantity of 28 feet required under purchase request 7017401468. The item is identified by NSN 9390-01-179-4508 and is classified as a critical application item with covered defense information potentially applicable, requiring strict handling and packaging protocols. Delivery must be completed within 10 days from the award, FOB origin, with no tolerance for quantity shortfall but allowing up to a 10% excess. Inspection and acceptance occur at the destination point, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, emphasizing distortion prevention during transit and storage. The contract mandates avoidance of plastic materials where feasible for cushioning, wrapping, or dunnage, and all marking must adhere to MIL-STD-129 with no special marking codes applied. Shipment must be dispatched using the fastest traceable means, excluding parcel post, and delivered to the designated government warehouse at Fort Hood, Texas, under the RDD 555 designation. Packaging must comply with specific unit of issue and packaging codes, including the QUP code 025 and pack code U, with palletization following DLA guidelines. The item is subject to technical and quality requirements outlined in the DLA Master List, and the applicable revision is tied to the solicitation issue or award date depending on acquisition size. The contract includes controlled delivery instructions and government-only data fields, with the point of contact for inquiries being Nafis Beyah at the Defense Logistics Agency. The required delivery date is June 30, 2026, and the contract solicitation closed on July 24, 2026.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 327999
New
DIBBS
DIAL-KNOB, LOCKThe contract pertains to the procurement of a dial knob lock identified by part number 231-1137G2 and NSN 5355000708143, with a total requirement of four units across three line items, each priced at one dollar per unit. All items must be delivered within twenty days to the destination FOB basis, with no variance allowed in quantity, and inspected and accepted at the delivery point. Packaging must comply with ASTM D3951, subject to higher precedence of DLA’s Master List of Technical and Quality Requirements, and all markings and labeling must adhere to MIL-STD-129. Palletization follows DLA’s RQ001 packaging standards, and supply chain traceability documentation must be retained per DLA Directive Procurement Note C03 from August 2016. The items are explicitly free of Class I ozone-depleting substances. Shipment must be made via the VSM system using the RDD 777 code, avoiding parcel post entirely, and must be transported by the fastest traceable means to the vessel USS FT LAUDERDALE (LPD 28) at FPO AE 09595. Each shipment is tied to specific tracking identifiers including TCN codes, project codes, and government-only administrative fields. The original required delivery dates span from April 9, 2025, to June 20, 2025, and the contract is governed under solicitation SPE7L1-26-T-859X, issued by the Department of Defense’s Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 541690
New
DIBBS
Security Assessment & SPRS Submission SupportThe contract requires the performance of a security assessment aligned with NIST SP 800-171 standards, either conducted internally or through a qualified third party, to evaluate the organization’s compliance with federal cybersecurity requirements. The assessment must be scored using the CMMC Assessment Guide to determine the organization’s cybersecurity maturity level, and the resulting findings and scores must be formally submitted to the Supplier Performance Risk System (SPRS). This effort is essential for demonstrating compliance with Department of Defense cybersecurity expectations and maintaining eligibility as a supplier within the defense supply chain. The work must be completed and reported prior to the response deadline of August 20, 2026, under a subcontract arrangement classified under NAICS code 541690 for other scientific and technical consulting services. The agency responsible is the Department of Defense through its Land Supply Chain division.
Other Scientific and Technical Consulting Services

POSTED

about 7 hours ago

DEADLINE

in 29 days
View Details
NAICS: 541611
New
DIBBS
CMMC SSP & POA&M DevelopmentThe contract requires the development and ongoing maintenance of a System Security Plan and Plan of Action & Milestones compliant with CMMC and NIST standards, ensuring continuous audit readiness and timely annual updates. Responsibilities include aligning documentation with current federal cybersecurity frameworks, tracking remediation activities, and maintaining accurate records to support compliance assessments. The work is classified as a subcontract under NAICS code 541611, indicating it involves administrative management and general management consulting services focused on cybersecurity. The solicitation was posted on July 22, 2026, with a response deadline of August 20, 2026, and is managed by the Department of Defense through the LAND SUPPLY CHAIN organization. The place of performance and exact location details are not specified, but all work must support the defense supply chain's cybersecurity posture in accordance with federal mandates.
Administrative Management and General Management Consulting Services

POSTED

about 7 hours ago

DEADLINE

in 29 days
View Details
NAICS: 541512
New
DIBBS
NIST SP 800-171 Security Control ImplementationThe contract requires the implementation and documentation of technical and administrative security controls aligned with NIST SP 800-171 Rev 2 across all 14 control families, including access control, audit and accountability, and system integrity. The effort is focused on ensuring comprehensive compliance with federal cybersecurity standards for protecting controlled unclassified information within a Department of Defense subcontract. The work involves not only deploying the necessary controls but also providing detailed documentation to demonstrate adherence to each requirement, ensuring auditable and verifiable security posture across the entire system environment. This subcontract, titled NIST SP 800-171 Security Control Implementation, is under the NAICS code 541512 and is issued by the Land Supply Chain organization within the Department of Defense. The solicitation was posted on July 22, 2026, with a response deadline of August 20, 2026. The performance location and exact point of contact are not specified, but the work is expected to support the broader security objectives of the DoD supply chain. All deliverables must meet the stringent requirements of NIST SP 800-171 Rev 2, and successful fulfillment will involve rigorous testing, validation, and reporting to confirm full compliance with the specified security control families.
Computer Systems Design Services

POSTED

about 7 hours ago

DEADLINE

in 29 days
View Details
NAICS: 541611
New
DIBBS
CMMC Supply Chain Compliance ManagementThe contract requires the development and enforcement of subcontractor flow-down clauses to ensure all lower-tier vendors adhere to the Cybersecurity Maturity Model Certification and NIST Special Publication 800-171 standards. This involves implementing structured processes to audit subcontractor compliance, collecting System Security Plans, and maintaining a centralized supplier compliance registry to track adherence across the supply chain. The work is critical to safeguarding controlled unclassified information within the defense industrial base and demands rigorous monitoring and documentation practices to meet federal cybersecurity requirements. All awarded parties must establish clear accountability mechanisms for subcontractors, including verification protocols and corrective action workflows, to ensure continuous compliance. The effort is scoped under the NAICS code 541611 for management consulting services and is issued by the Department of Defense under LAND SUPPLY CHAIN. Responses are due by August 20, 2026, with the solicitation published on July 22, 2026, indicating a focus on proactive supply chain risk mitigation aligned with defense cybersecurity mandates.
Administrative Management and General Management Consulting Services

POSTED

about 7 hours ago

DEADLINE

in 29 days
View Details
NAICS: 541512
New
DIBBS
Cyber Incident Response & ReportingThe contract requires the establishment and ongoing maintenance of a comprehensive cyber incident response plan aligned with Department of Defense standards. This includes continuous monitoring for cyber intrusions, rapid detection and containment of security breaches, and the timely reporting of all incidents to the DoD Cyber Crime Center within 72 hours of discovery. The scope emphasizes proactive defense and strict adherence to reporting timelines to ensure situational awareness and coordinated response across DoD networks. The contract is structured as a subcontract under the NAICS code 541512 for Computer Systems Design Services and is solicited by the Land Supply Chain office within the Department of Defense. Responses are due by August 20, 2026, and performance is expected to support DoD mission-critical infrastructure regardless of physical location. While no set-aside designation is specified, the work is tied to national security obligations and requires demonstrated capability in cyber incident management and compliance with federal cybersecurity protocols.
Computer Systems Design Services

POSTED

about 7 hours ago

DEADLINE

in 29 days
View Details
NAICS: 541611
New
DIBBS
CMMC Certification Readiness & ImplementationThe contract requires comprehensive support to achieve CMMC certification by conducting a gap assessment against CMMC requirements, developing a complete System Security Plan, and implementing all missing security controls to align with DFARS 252.204-7012 and NIST SP 800-171 standards. The scope encompasses evaluating current cybersecurity practices, identifying deficiencies relative to the required CMMC maturity level, and executing targeted remediation measures to ensure full compliance. The deliverable includes preparing the organization for an official CMMC assessment, ensuring all documentation, policies, and technical controls are in place and properly documented. All work must be completed in accordance with Department of Defense specifications and is classified as a subcontract under NAICS code 541611, targeting organizational readiness through technical and procedural enhancements. The solicitation is managed by the Land Supply Chain under the Department of Defense, with a response deadline of August 20, 2026, and no set-aside provisions specified. Performance is expected to meet federal cybersecurity obligations without geographic restriction, and while no point of contact is listed, all submissions must adhere to the DIBBS platform guidelines for the listed solicitation number.
Administrative Management and General Management Consulting Services

POSTED

about 7 hours ago

DEADLINE

in 29 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPThis contract solicits 21 helical compression springs with part number 5360-12-330-7801 under solicitation SPE7L1-26-T-862P, issued by the Department of Defense through the Land Supply Chain. The product must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which take precedence over other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA Packaging Requirements for Procurement. The springs must not contain intentionally added mercury or mercury compounds except in specific exempted applications such as batteries, fluorescent lights, or instrument controls as defined by NAVSEA, and any portable devices containing mercury must have shockproof construction with a secondary containment boundary per NAVSEA 5100-003D. Delivery is FOB origin with a 122-day lead time, inspection and acceptance occur at destination, and the required delivery date is November 18, 2026, with a need ship date of July 7, 2026. The quantity is fixed with zero variance allowed. The unit of issue is each, priced at $21.00 per unit, totaling $441.00. Packaging must be compliant with QUP 001 and all DLA standards. The consignee is Arizona Industries for the Blind in Phoenix, AZ, and transportation must follow DLAD PROC NOTES C19 and C20. The contract references authorized DoD units of issue and mandates strict adherence to all governing specifications without exception.
Spring Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
PANEL, VEHICULAR OPEThis contract pertains to the procurement of a vehicular panel identified by NSN 2510016961369 and part number 22924496, supplied exclusively by Volvo Group North America LLC under a restricted source arrangement requiring formal government engineering approval. The item is subject to strict technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which override any other specifications including ASTM D3951. Packaging must comply with MIL-STD-129 labeling and RP001 DLA packaging directives, with all units delivered in a single piece, packaged per ASTM D3951 and palletized according to DLA guidelines. Delivery is required FOB origin within 20 days of contract award, with no tolerance for quantity variance. Inspection and acceptance occur at the destination point, Fort Stewart, Georgia, where the item must be shipped via traceable freight methods—parcel post is prohibited. The contract specifies a single unit quantity with no stated unit price, implying a nominal or fixed-cost transaction. All documentation, marking, and shipment logistics must align with the provided references including the RDD 777, project code TP 2, and supplier designation W9046W. The solicitation was issued on July 22, 2026, with responses due August 3, 2026, and the delivery must be completed no later than July 15, 2026, indicating a tightly scheduled requirement.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
GASKETThe contract pertains to a gasket with NSN 5330-01-017-6422, requiring one unit to be delivered within 20 days of award. It is issued under solicitation number SPE7L1-26-T-861R by the Department of Defense’s Land Supply Chain, with a response deadline of August 3, 2026. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the version in effect on the solicitation issue date controlling for this simplified acquisition. Strict prohibitions are in place: mercury or mercury-containing compounds must not be intentionally added or come into direct contact with the supplied hardware, except for specific functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a second boundary of containment as mandated by NAVSEA 5100-003D. Asbestos, as defined by FED-STD-313, is completely prohibited. The place of performance is designated as FPO with ZIP code 96683, and all supplies must comply with DLA packaging requirements for procurement. The primary point of contact is Kristina Derry, reachable via email and phone provided.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
BELT, VThe contract pertains to the procurement of one BELT,V with NSN 3030-01-718-0096 and part number 023027, issued under solicitation SPE7L1-26-T-862X by the Department of Defense’s Land Supply Chain. The item is to be delivered in a single unit with a firm quantity of one, no variance permitted, and must be shipped within 20 days from the contract award, with delivery terms FOB origin. Inspection and acceptance both occur at the destination point. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, container types, and marking in accordance with MIL-STD-129, with no special marking required. The item is to be delivered to the USS Dwight D Eisenhower CVN 69 at FPO AE 09532, with vendor shipments required to use traceable means—parcel post is prohibited. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revision controls based on acquisition size and amendment dates. The contract includes specific logistical instructions from DLA procurement notes regarding transportation and vessel shipment, and the vendor must use the provided vendor shipment code and shipping address. The required delivery date is July 15, 2026, and the solicitation response deadline is August 3, 2026, with Kristina Derry listed as the primary point of contact.
All Other Rubber Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333612
New
DIBBS
GUARD, MECHANICAL DRThis contract solicitation is for a single mechanical guard unit with NSN 3020-01-722-3423 under solicitation number SPE7L1-26-T-862Y, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. The requirement is for full and open competition with a delivery deadline of five days after award, and responses must be submitted by August 3, 2026. Technical and quality specifications are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent quality and inspection requirements including inspection and acceptance at origin, physical identification and bare item marking, and tailored higher-level contract quality standards applicable to both manufacturers and non-manufacturers. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. Export control applies to technical data related to this item under ITAR or EAR regulations, prohibiting any disclosure to foreign persons without authorization; only contractors with approved US/Canada Joint Certification Program status, completed DLA training, and formal approval may access such data. The place of performance is specified as N Stonington, CT 06359, and the primary point of contact is Matthew Lepak at the provided email and phone number.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
DIBBS
NON-NSN ITEMA single unit of item WF10369 with CAGE code 79396 is being procured under solicitation SPE7L1-26-T-863D for delivery to Fort Carson, Colorado, with a required delivery date of July 22, 2026, and a 20-day lead time from contract award. The item is classified as a non-NSN and is subject to strict packaging requirements per ASTM D3951, with precedence given to all DLA Master List of Technical and Quality Requirements. Packaging and labeling must comply with MIL-STD-129, and palletization must follow RP001 DLA Packaging Requirements for Procurement. The unit of issue is EA with no variance allowed in quantity, and inspection and acceptance occur at destination. Shipping must be via the fastest traceable method, excluding parcel post, with delivery directed to the Central Receiving Point, Building 330, at Fort Carson. The freight and mark-for addresses are identical, and the transaction is identified by TCN W91FPV62010007 under project TP 2 and supplement W81RP6. The government point of contact is Darrell Pannell, and the purchase request number is 7017591782.
All Other Miscellaneous Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details