Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Diesel Engine Parts Kit Supply and Assembly

Active

Federal

Response Deadline07/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the procurement, assembly, and packaging of a complete diesel engine parts kit identified by NSN 2815014234752, to be delivered as a single integrated unit with approved corrosion protection and secure containment measures. All components must be meticulously assembled and sealed to ensure readiness for immediate deployment, with strict prohibition against bulk or loose shipping methods to maintain integrity and operational readiness. The work must comply with military-grade standards for durability and environmental resilience, ensuring the kit survives handling, storage, and transit under demanding conditions. This subcontract under NAICS code 336310 is issued by the Department of Defense through the LAND SUPPLIER OPNS ENGINES office, with performance required at New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on July 16, 2026, and proposals must be submitted by July 27, 2026. Participation is open under general subcontracting terms without specific set-aside classifications, and all bidders must adhere to precise packaging and handling directives to avoid disqualification. The full details and submission portal are accessible via the provided DIBBS link.

General Info

Procure, assemble, and package diesel engine kit NSN 2815014234752 for military deployment with corrosion protection and secure containment.

Agency

Department Of Defense → LAND SUPPLIER OPNS ENGINESView Agency

NAICS

336310 - Motor Vehicle Gasoline Engine and Engine Parts ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Response DeadlineJul 27

Submission deadline

Response Deadline

07/27/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLIER OPNS ENGINES

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLIER OPNS ENGINES

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procure, assemble, and package a complete diesel engine parts kit (NSN: 2815014234752) as a single unit with corrosion protection and secure containment. Bulk shipping is prohibited.

Similar Contracts

Same NAICS industry code

BLADE, WINDSHIELD WIThis contract pertains to the procurement of windshield wiper blades, identified by NSN 1680015187388 and part numbers from Grimes Aerospace and Boeing, with a requirement for nine units to be delivered within 85 days from the contract award. Delivery is FOB origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot in Tinker AFB, Oklahoma. The item is designated as a critical application component, subject to stringent quality and configuration controls, and must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. Packaging must adhere to DLA’s procurement and preservation standards, including specific preservation methods and unit container specifications. The contract mandates adherence to zero-defect sampling under MIL-STD-1916 or equivalent, with critical, major, and minor attributes assigned verification levels and AQL thresholds as defined. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03, and cybersecurity compliance requires a CMMC Level 2 self-assessment. The contractor must also comply with FAA airworthiness approval requirements and bare part marking standards, while ensuring all technical and quality specifications referenced by R or I numbers are met as defined in the DLA Master List. The contract includes no flexibility in quantity, with zero variance permitted, and prohibits removal of government identification from non-accepted supplies. Transportation and shipping logistics are governed by specific DLA procedural notes, and the delivery deadline is set for October 7, 2026, with a need ship date of September 12, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

O-RINGThe contract governs the supply of an O-RING with NSN 5331-01-652-8721, quantity of 51 units, under solicitation SPE7L5-26-Q-0156, with delivery required within 30 days after award. The item is classified as a critical application and must comply with stringent technical and quality standards including MIL-STD-130 for Item Unique Identification (IUID), MIL-STD-129 for marking, and MIL-STD-2073-1E for packaging. It is subject to the DFARS 252.211-7003 clause regarding Covered Defense Information and requires FAA Airworthiness Approval. Quality assurance follows MIL-STD-1916 or equivalent zero-based sampling with acceptance criteria of zero non-conformances unless otherwise specified, and non-conforming attributes are assigned verification levels or AQLs as defined by the drawing or QAP. The manufacturer must maintain ISO 9001:2015 certification and adhere to all referenced technical and quality requirements from the DLA Master List. Packaging must conform to DLA-specific requirements including preservation method 33, unit packaging as BE, and palletization per RP001, with no special marking applied. Delivery is FOB origin to the destination at Tinker AFB, Oklahoma, with inspection and acceptance occurring at the destination. The item is part of a federal acquisition with no quantity variance allowed and is tracked through the DLA logistics system with identified point of contact and procurement details.

LAND SUPPLIER OPNS ENGINES

POSTED

about 15 hours ago

DEADLINE

VALVE, SOLENOID

DDSP NEW CUMBERLAND FACILITY

POSTED

about 15 hours ago

DEADLINE

ACTUATOR,ELECTRO-METhis contract pertains to the procurement of an ACTUATOR, ELECTRO-ME under solicitation number SPRMM126QHC66, issued by DLA Mechanicsburg under emergency acquisition flexibilities per FAR Part 18. The requirement specifies that the actuator must conform to Cage Code 75477 and reference number AC-3313-26, with physical marking compliant with MIL-STD-130 Rev N. The contractor is responsible for ensuring full compliance with all quality standards, including inspection, preservation, packaging, and marking in accordance with MIL-STD-2073 and other referenced documents, with records retained for 365 days after final delivery. Any design, material, or part number changes require prior written approval from the NAVICP-MECH Contracting Officer, categorized by specific code definitions governing interchangeability and substitution. The contractor must be an authorized distributor of the original manufacturer and provide documented proof of authorization with their offer. The contract mandates electronic submission of invoices and receiving reports through the Wide Area Workflow (WAWF) system and requires registration with the Electronic Document Access portal via PIEE. Vendors not acting as manufacturers must disclose the OEM’s CAGE code and part number. All submissions via EDI must explicitly note any deviations from solicitation requirements, or they will be considered non-compliant and subject to cost deductions upon modification post-award. The response deadline has been extended to July 27, 2026, with all other terms unchanged. Applicable DLA procurement notes include those addressing manufacturing phase-outs, packaging corrections, product verification, inspection at source, and additive manufacturing. Compliance with Buy American provisions, equal opportunity for veterans, security exclusions, and annual certifications is required, and all technical data must adhere to specified distribution statements under OPNAVINST 5510.1. Contractors are advised to register with NAVSUP WSS for automated notifications and to access critical documents through official DOD and DLA sources.

SPRMM1 DLA Mechanicsburg

POSTED

about 20 hours ago

DEADLINE

Marine Outboard Engines The contract solicits four Honda outboard engines, specifically two with clockwise rotation and two with counter-clockwise rotation, to meet marine propulsion requirements. This is a total small business set-aside under the SBA program, classified under NAICS code 336310 for motor vehicle parts and accessories manufacturing, ensuring eligibility is restricted to small businesses. The solicitation, issued by the Department of Defense through the W6QM Micc-Ft Drum office, was posted on July 17, 2026, with a response deadline of July 24, 2026. The contract is a combined solicitation, indicating it may include both purchase and service elements. The place of performance is listed with a ZIP code of 28409, suggesting delivery or installation will occur in North Carolina, while the coordinating office is based at Fort Drum, New York. Primary point of contact for inquiries is Kevin Harp, reachable via email or phone provided in the solicitation details.

W6QM Micc-Ft Drum

POSTED

about 20 hours ago

DEADLINE

Valve, Liquid OxygenThe Defense Logistics Agency (DLA) Weapons Support in Columbus, Ohio, is preparing to issue a solicitation for NSN 4820-00-796-9680, Valve, Liquid Oxygen, to ensure stock replenishment for military depots. This item, sourced exclusively from Essex Industries Inc. under part number 20C-0021-2, is classified as a Critical Safety Item with higher-level quality requirements and mandates a Contractor First Article Test. The procurement will be conducted as a Fixed Price Indefinite Delivery Contract with a three-year base period, under the First Destination Transportation program, and is not reserved for small businesses. Delivery timelines are 270 days without First Article Testing or 375 days with it, with FOB Origin and inspection at origin required. The contract falls under NAICS code 336310 and adheres to FAR Part 12 policies for commercial items. Proposals must be submitted electronically, preferably via Dibbs, with email submissions accepted up to 15MB to Kristina.Wolf@dla.mil. The solicitation, numbered SPE7MX26RX062, will be released on June 22, 2026, with proposals due by July 23, 2026. Evaluation will consider a combination of price, past performance, delivery capability, and other factors listed in the solicitation. Price discussions will occur through an online reverse auction where offerors’ bids will be anonymously disclosed to participants, and the final auction price will serve as the offeror’s final proposal revision unless further discussions are initiated. All offers must be in U.S. dollars and in English, and the Contracting Officer retains authority to conduct additional negotiations under FAR 15.307 if necessary.

DLA Land And Maritime

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Marine Engine Supply – Jetboat MotorA marine-rated General Motors LT4 6.2L supercharged engine platform is being procured for integration into jetboat applications, with the contract encompassing the full supply of the engine along with all necessary integration components required for seamless marine operation. The engine is specifically configured for jetboat use, ensuring compatibility with marine environments, including corrosion resistance, cooling system adaptations, and power delivery optimization suited for high-performance watercraft. Delivery of the complete engine platform, including all supporting hardware and subsystems, is a core requirement of the agreement. The opportunity is issued as a subcontract under NAICS code 336310, which corresponds to motor vehicle parts manufacturing, and is posted by the state of Utah with a response deadline of July 30, 2026. The solicitation is accessible via a public link, indicating an open bidding process for qualified vendors. There is no set-aside designation, meaning all eligible entities may respond. The place of performance and point of contact details are not specified in the provided data, but successful bidders will be expected to meet the technical specifications and delivery timelines outlined in the full solicitation documents.

POSTED

DEADLINE

Marine Engine Supply – Airboat MotorThe contract is for the supply of a single marine-rated General Motors LT4 6.2L supercharged engine platform specifically configured for airboat applications, including all required components to ensure full operational readiness in marine environments. The engine must meet rigorous marine standards for durability, corrosion resistance, and performance under demanding conditions typical of airboat operations, with all necessary auxiliary systems, mounts, controls, and safety features included as part of the platform. Delivery of the complete assembly is required to fulfill the scope. This is a subcontract opportunity posted by the state of Utah on July 16, 2026, with a response deadline of July 30, 2026. The NAICS code 336310 indicates the transaction falls under the motor vehicle parts manufacturing sector, aligning with the specialized nature of marine engine systems. The place of performance and point of contact details are not specified, and the contract is not designated for any specific set-aside classification. Interested parties must submit responses through the provided Utah BonfireHub portal.

POSTED

DEADLINE

Boat Motors - (Motor 1 for Airboat Motor) (Motor 2 for Jetboat Motor)The State of Utah Division of Purchasing, acting on behalf of the Division of Outdoor Recreation, is soliciting bids for two marine motors under Invitation for Bid NC26-84: one for an airboat used in search and rescue operations and another for a jet boat. The airboat motor must be delivered by or before September 1, 2026, due to its critical emergency role, while the jet boat motor must be delivered by or before January 5, 2027. Each motor comes with strict technical specifications, including a requirement for a marine-rated GM LT4 6.2L supercharged engine producing 600–700 HP, and each has a budget cap of $29,000 and $38,500 respectively, inclusive of shipping. Bids must meet all specifications and budget limits to be considered responsive, and vendors may bid on one or both motors independently. Awards will be made to the vendor whose proposed delivery date is closest to the preferred date, even if slightly beyond it, if no vendor can meet the deadline. Delivery is F.O.B. Destination Freight Prepaid and Allowed, meaning the vendor retains responsibility for the goods until accepted at the state’s designated location in Utah. The vendor must guarantee pricing until final delivery and acceptance of both motors. Contract compliance requires adherence to Utah-specific statutory requirements, including certification that the vendor does not use products from restricted foreign entities or involve forced labor, participates in the E-Verify system for employment verification, and does not engage in economic boycotts of Israel. The vendor must also comply with Utah’s Government Data Privacy Act and ensure all work product is considered a “work made for hire,” with full ownership transferring to the state upon creation. No subcontracting or assignment is permitted without prior written approval. Inspection and acceptance occur at the delivery site, with the state having up to 30 days post-delivery to verify conformity with specifications; nonconforming items must be corrected or replaced at the vendor’s expense. All proposals must be submitted electronically through Utah’s U3P portal by July 30, 2026, and include required certifications and documentation. The contract will conclude once both motors have been delivered and accepted, and payment will be processed within 30 days of a correct invoice, though no specific remittance or accounting details are provided. The solicitation anticipates multiple awards, with each motor treated as a separate line item, and no mandatory site visit is required.

POSTED

DEADLINE

Supply of Piston Ring for Cooper Bessemer Diesel EngineThe contract specifies the procurement and delivery of two used piston rings identified by NSN 2815002781537, intended for use in a Cooper Bessemer diesel engine. These components must be properly packaged and labeled in accordance with military standards to ensure safe handling and traceability throughout transit. The delivery destination is a Department of Defense facility located at Cavalier SFS with the ZIP code 58220-9350, requiring compliance with all DoD logistics and receipt protocols. The procurement is structured as a subcontract under NAICS code 336310, which classifies it within the aerospace product and parts manufacturing sector. The solicitation was posted on July 16, 2026, with responses due by July 27, 2026, allowing potential suppliers a window of eleven days to submit offers, though no specific set-aside classifications or agency point of contact details are provided. The contract is managed through the DLA’s DIBBS system under reference number SPE7L126T839Y.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Defense Injector Assembly SupplyThe contract involves the supply of eight units of Injector Assembly F, identified by NSN 2910016287022, for use in military vehicle or engine systems. These components must meet all applicable defense standards including DFARS and DPAS requirements to ensure compliance with federal procurement regulations and domestic sourcing priorities. The delivery location is specified as Sweihan Air Base in the United Arab Emirates, indicating international operational deployment. The contract is classified as a subcontract under the NAICS code 336310, which corresponds to engine and engine parts manufacturing, and is administered by the Defense Logistics Agency under the Department of Defense. The posting date indicates this opportunity was made available on July 16, 2026, and the award details can be referenced through the provided DIBBS link.

Defense Logistics Agency

POSTED

DEADLINE

O-RING Manufacturing and SupplyThe contract requires the manufacture and supply of 22 units of an O-RING with part number 675C-30006 and NSN 5331017015098, adhering strictly to military packaging, marking, and hazardous materials communication standards. The work is classified as a subcontract under NAICS code 336310, and the performance location is designated as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on July 16, 2026, and responses are due by July 27, 2026, with no set-aside provisions specified. The contracting activity is under the Department of Defense through the LAND SUPPLY CHAIN organization, and all deliverables must meet the rigorous compliance requirements expected for military-grade components. The full details and submission portal are accessible via the provided DIBBS link.

LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLIER OPNS ENGINES

Same awarding agency

Precision O-Ring Manufacturing for Critical Aerospace ApplicationThe contract entails the manufacture and delivery of a precision O-Ring designated by NSN 5331-01-652-8721, specifically for a critical aerospace application requiring strict adherence to FAA airworthiness standards, ISO 9001:2015 quality management systems, and Department of Defense traceability protocols including MIL-STD-130 IUID marking. The component must be produced under rigorous quality controls to ensure performance, safety, and full compliance with military and aviation regulatory frameworks, with all materials and processes subject to documented traceability from raw material sourcing through final delivery. The place of performance is designated as Tinker AFB with a zip code of 73145-8000, indicating the end-use location and operational context of the part. The solicitation is classified as a subcontract under NAICS code 332996, which corresponds to other fabricated metal product manufacturing, and is issued by LAND SUPPLIER OPNS ENGINES under the Department of Defense. The opportunity was posted on July 17, 2026, with a response deadline of July 24, 2026, providing interested parties a limited window to submit proposals. The contract requires full compliance with DOD procurement standards and emphasizes end-to-end accountability through unique item identification and certification of conformance. All deliverables must be accompanied by complete documentation to satisfy audit and inspection requirements for aerospace components used in defense applications.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 15 hours ago

DEADLINE

SPRING, HELICAL, COMPThe contract pertains to the procurement of 15 helical compression springs with NSN 5360-00-134-4056, issued under solicitation number SPE7L5-26-T-4306 by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 6, 2026, with a response deadline set for July 17, 2026, indicating a ten-day window for vendors to submit proposals. The item is classified as a federal procurement with no specific set-aside designation, meaning it is open to all eligible contractors without preferential treatment for small businesses or other categories. The place of performance and organization address details are unspecified, but the contracting entity operates within the United States. Interested parties can access the full solicitation details through the official DIBBS platform using the provided UI link.

Spring Manufacturing

POSTED

about 15 hours ago

DEADLINE

SPRING, HELICAL, COMPThe contract pertains to the procurement of 31 helical compression springs identified by NSN 5360-01-006-8816 under solicitation number SPE7L5-26-T-4283, issued by the Defense Logistics Agency within the Department of Defense. The solicitation was posted on July 6, 2026, with a response deadline of July 17, 2026, indicating a standard timeframe for vendor submissions. The item is classified as a federal procurement with no specific set-aside provisions, meaning it is open to all eligible contractors without restrictions based on business size or ownership type. The place of performance and office address details are not specified, but the contract is governed under U.S. federal procurement rules. The official solicitation can be accessed via the DIBBS portal for detailed technical specifications and submission requirements.

Spring Manufacturing

POSTED

about 15 hours ago

DEADLINE

O-RINGThe contract seeks 369 O-rings identified by NSN 5331-01-354-5789 under solicitation number SPE7L5-26-T-4275, issued by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 6, 2026, with a response deadline of July 17, 2026, indicating a competitive procurement process open to qualified suppliers. The item is a standard mechanical seal component, likely required for critical equipment maintenance or deployment within federal defense systems. The place of performance and point of contact details are unspecified, but the contract is classified as federal with no set-aside designation, meaning it is open to all eligible vendors regardless of business size or category. All submissions must adhere to the requirements outlined in the solicitation accessible via the DIBBS portal.

Other Fabricated Wire Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

HOSE, AIR DUCTThe item specified is a hose for an air duct with NSN 4720-01-042-3859, with a quantity of five units to be delivered within 67 days after contract award under purchase request 7014580811. The solicitation number is SPE7L5-26-T-4280, published on July 17, 2026, with responses due by July 22, 2026. The contract falls under NAICS code 332999 and is managed by the Department of Defense through Land Supplier Operations Engines. The place of performance is New Cumberland, Pennsylvania, with Leo Ford as the primary point of contact, reachable at 614-692-3131 or leo.ford@dla.mil. This item is subject to strict export control regulations under either ITAR or EAR, meaning any technical data associated with it cannot be disclosed to foreign persons within or outside the United States without prior authorization from the Department of State or the Department of Commerce. Compliance with DFARS 252.225-7048 is required, and only DLA contractors with approved US/Canada Joint Certification Program status, who have completed mandatory training and questionnaire submissions, are permitted access to the controlled technical data.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

SCREW, CAP, HEXAGON HThe contract pertains to the procurement of 1,725 units of a hexagon head cap screw identified by NSN 5305-01-653-2288, with a delivery requirement of 80 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. The item is subject to strict export control under ITAR or EAR regulations, prohibiting unauthorized disclosure or transfer of technical data to foreign persons, including foreign nationals within the U.S., and necessitating compliance with DFARS 252.225-7048. Only contractors with approved U.S./Canada Joint Certification Program status, completed DOD export control training, and formal DLA authorization may access the controlled data. Additionally, ozone-depleting chemicals are strictly prohibited in manufacturing or handling, with any substitute chemicals requiring prior approval unless already authorized by specifications. The contract mandates removal of government identification from non-accepted supplies and is issued under solicitation SPE7L5-26-T-4287 with a response deadline of July 22, 2026. The acquiring agency is the Department of Defense under Land Supplier Operations Engines, with performance to be delivered to Tracy, California, 95304-5000, and primary point of contact is Bradley Evans with DLA.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

O-RINGThe contract is for the procurement of O-RINGS with part number 82005510-005 and national stock number 5331-00-470-9712, to be supplied by approved vendors including Parker-Hannifin Corp, Parco LLC, Woodward HRT Inc, and Stillman Seal Corporation DBA. A total of 715 units are required at a unit price of $715.00, totaling $511,225. The item is designated as a critical application component with a strict no-asbestos compliance requirement per Fed-Std-313. Delivery must occur within 84 days after the need date of February 10, 2026, with a final required delivery date of March 21, 2026. All shipments are FOB origin with zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-DTL-117 Type II Class C Style 1, using medium-duty waterproof, greaseproof, opaque bags to protect against UV degradation. Marking must conform to MIL-STD-129 with no special markings required. The items must be delivered to DLA Distribution Red River in Texarkana, TX. Technical and quality standards referenced via R and I numbers are controlled by the DLA Master List as of the solicitation issue date. Transportation and shipping procedures follow DLAD Proc Notes C19 and C20.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

WINDOW, DIALThe contract involves the procurement of six WINDOW DIAL units under NSN 5355-01-654-5859, with a delivery requirement within 31 days of award. The solicitation number is SPE7L5-26-T-4310, issued on July 17, 2026, with responses due by July 22, 2026, and is managed by the Department of Defense under the Land Supplier Ops Engines organization. The place of performance is identified as New Cumberland, Pennsylvania with a zip code of 17070-5002, and the primary point of contact is Paul Doerfler, reachable via email and phone. This procurement operates under the DLA Packaging Requirements and incorporates technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, which are accessible online; the applicable revision of the master list is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. The NAICS code is 332119 and the acquisition type is federal, with no set-aside designation. The contract mandates the removal of government identification from any non-accepted supplies.

Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 15 hours ago

DEADLINE

SPRING, HELICAL, COMPThe contract is for 34 helical compression springs identified by NSN 5360-00-184-8103, sourced from Lourdes Industries Inc in Hauppauge, NY, under solicitation SPE7L5-26-T-4232. Delivery is required within 95 days of award, with the solicitation posted on July 17, 2026, and responses due by July 22, 2026. The procurement falls under NAICS code 332613 and is managed by the Department of Defense’s Land Supplier Ops Engines, with performance location in Greensboro, NC, 27409. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date for simplified acquisitions. Government identification must be removed from non-accepted supplies per RQ011, and all requirements referenced by R or I numbers are incorporated by reference from the DLA website. Primary point of contact is Leo Ford, reachable via email and phone provided.

Spring Manufacturing

POSTED

about 15 hours ago

DEADLINE

SPRING, HELICAL, COMPThis contract specifies the procurement of two helical compression springs with NSN 5360-01-278-7600 and part number NK3786-1, designated as a critical application item under SPE7L5-26-T-4238. The springs must comply with technical and quality requirements outlined in the DLA Master List, with packaging conforming to MIL-STD-2073-1E and marking per MIL-STD-129, including no special marking codes. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses in batteries, lights, instruments, sensors, controls, weapon systems, or Navsea-specified reagents, with portable devices requiring shockproof construction and secondary containment per Navsea 5100-003D. Delivery is due within 31 days of contract award, FOB origin, with inspection and acceptance occurring at the destination. The unit of issue is each (EA), with zero tolerance for quantity variance. The sole delivery address is Arizona Industries for the Blind in Phoenix, AZ, and the required ship date is August 18, 2026, with an original delivery deadline of June 23, 2026. Transportation procedures are governed by DLAD Proc Notes C19 and C20. The solicitation was posted on July 17, 2026, with responses due by July 22, 2026, under NAICS 332613, managed by the Department of Defense’s Land Supplier Operations Engines office, with Paul Doerfler as the primary point of contact.

Spring Manufacturing

POSTED

about 15 hours ago

DEADLINE

HOSE ASSEMBLY, NONMEThis contract specifies the procurement of a metallic hose assembly identified by NSN 4720012202029 and part number 359-2D0051 from EATON AEROQUIP LLC, with a total quantity of 51 units. The item is classified as a critical application component and must be delivered FOB origin within 91 days, with no variance allowed in quantity. Delivery is required to the designated receiving warehouse in Tracy, California, with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, while adhering to the stricter standards outlined in the DLA Master List of Technical and Quality Requirements, which take precedence. All packaging must conform to RP001, DLA Packaging Requirements for Procurement, with palletization and unit of issue details strictly as defined in the contract. The unit price is $51.00 per each, resulting in a total contract value of $2,601.00. Transportation and shipping instructions reference DLAD Proc Notes C19 and C20, and the solicitation number is SPE7L5-26-T-4290, with an original required delivery date of November 20, 2026, and a need ship date of December 15, 2025. The contract is governed by DLA procurement policies, and all technical and quality specifications referenced via R or I numbers are incorporated by reference from the DLA Master List. The point of contact for inquiries is Leo Ford, with procurement managed under the Department of Defense’s Land Supplier Operations Engines.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE