Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Diesel Standby Generator and Automatic Transfer Switch (ATS) Supplier

Active

State & Local

Response Deadline10/30/2026, 01:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract agreement involves the supply and delivery of a 130 kW diesel-fueled standby generator and a 400-amp, 4-pole automatic transfer switch for municipal building projects located in Milford Township, Bucks County, Pennsylvania. The scope of work requires the provision of a complete system including a sub-base fuel tank, electronic controller, automatic starting system, engine block heater, and sound attenuation. All equipment must meet NFPA 110 Level 2 and EPA certification standards. The project is categorized under NAICS code 333611 and is managed by Bucks County. Interested parties must submit their responses by the deadline of October 30, 2026, at 1:00 PM. The selected supplier will be responsible for the delivery of both the generator unit and the automatic transfer switch directly to the project site.

General Info

Supply 130kW diesel generator and transfer switch for Milford Township by October 30, 2026.

Agency

Pennsylvania → Bucks County

NAICS

333611 - Turbine and Turbine Generator Set Units Manufacturing

Place of Performance

Bucks County, PA, USA

Set-Aside

NONE

Documents

This scope was carved out of Milford Township, Bucks County.

The full solicitation package (11 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Emergency Back-Up Generator Replacement

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 19

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 01:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyPennsylvania → Bucks County

ContactsNo contacts available

OfficeN/A

Organization / AgencyPennsylvania → Bucks County

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies a 130 kW diesel-fueled standby generator and 400-amp, 4-pole automatic transfer switch (ATS) for prime contractors on Bucks County / Milford Township municipal building projects. Furnishes equipment including sub-base fuel tank, electronic controller, automatic starting system, engine block heater, and sound attenuation. Equipment must be NFPA 110 Level 2 and EPA certified. Delivers generator unit and ATS to site.

Similar Contracts

Same NAICS industry code

BLADE,TURBINE ENGIN

Solicitation # SPRMM126QHE15

The Department of Defense, through DLA Mechanicsburg, is conducting a market survey under solicitation SPRMM1-26-Q-HE15 for the procurement of turbine engine blades, specifically NSN 2835-01-457-8177 and part number L47576P01. The government intends to solicit and negotiate with a single source under FAR 6.302-1, though it is currently seeking capability statements and market research responses from all interested sources to determine if a competitive procurement is warranted. The requirement emphasizes the need for OEM traceability back to General Electric Company (CAGE 07482) and seeks to determine if the item qualifies as a commercial product under FAR Part 12. Interested respondents must submit their capabilities and supporting documentation, including price lists, warranties, and evidence of commercial sales, to Andrew Etheredge by September 11, 2026. The government is evaluating the feasibility of FOB Origin terms and inspection and acceptance at the origin. While this is a pre-solicitation notice and not a formal request for quotes, the potential contract may include up to four option years. Additionally, if the contract value exceeds 10 million dollars, contractors may be required to provide certified cost or pricing data in accordance with the Truth in Negotiations Act.

SPRMM1 DLA Mechanicsburg

POSTED

about 1 hour ago

DEADLINE

in about 1 month

Manufacturing and Supply of Critical Safety Clutch AssemblyThis subcontract, managed by the Department of Defense under Navsup Weapon Systems Support Mech, involves the manufacturing and supply of a complete Clutch Assembly (NIIN: 016701992) for US Navy shipboard projects. The contractor is responsible for fabricating the assembly according to Technical Data Package Version O01, ensuring that all non-metallic materials comply with NAVSEA SS800-AG-MAN-010/P-929U toxicity and flammability standards. Due to the component's designation as a Critical Safety Item, the project requires precision machining to meet strict tolerances and adherence to Level I Scope of Certification. The final deliverable is a fully certified Clutch Assembly. The solicitation was posted on October 20, 2026, with a response deadline of November 23, 2026, falling under NAICS code 333611.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

28--PLATE,COMPONENT MOUNTI

Solicitation # SPE4A527T1527

POSTED

DEADLINE

28--INSULATION BLANKET,THE

Solicitation # SPE4A627T5476

POSTED

DEADLINE

28--STIFFENER,HEATSHIELD,N

Solicitation # SPE4A627T5433

POSTED

DEADLINE

Solicitation # N0010425QXC36

Solicitation N0010425QXC36 is a Firm-Fixed Price procurement issued by the NAVSUP Weapon Systems Support Mechanicsburg for the manufacture and supply of air sensors, specifically NIIN 006011423. The contract requires strict adherence to design specifications associated with Cage Codes 07482 and 59885, with technical data governed by TDP Version 015. Award will be based on the Lowest Priced Technically Acceptable method, with the government utilizing the Supplier Performance Risk System to evaluate item, price, and supplier risk. The deadline for electronic quote submission to the contracting officer is October 26, 2026. Key operational requirements include compliance with MIL-STD-130 for physical identification and DFARS 252.211-7003 for Item Unique Identification. Packaging must follow MIL-STD-2073, with specific levels designated for CONUS and OCONUS shipments. The contract is a DO rated order for national defense and emergency preparedness. All freight is FOB Origin, and inspection and acceptance will also occur at the origin. Payment must be processed electronically via the Wide Area Workflow system. Offerors must be authorized sources or provide official OEM authorization to be considered for award.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

DIAPHRAGM ASSEMBLY

Solicitation # SPE4A5-27-T-1466

Solicitation SPE4A5-27-T-1466 is a federal procurement request issued by the DLA Weapons Support ASC Supplier OEM Division for the acquisition of five diaphragm assemblies, identified by NSN 2835000150336 and Honeywell part number 96156-2. The contract specifies a delivery timeframe of 167 days after the award, with a need ship date of April 13, 2027, and an original required delivery date of October 16, 2027. Delivery is set as FOB Origin, with the final destination for both inspection and acceptance being DLA Distribution Cherry Point in North Carolina. The procurement includes stringent quality and compliance requirements, including a CMMC Level 2 Self-Assessment and adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Quality assurance is governed by MIL-STD-1916 and MIL-STD-105/ASQ Z1.4, with a zero-nonconformance requirement for sample lot acceptance. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and DFARS regulations regarding covered defense telecommunications. Offerors must be registered in the System for Award Management and submit quotes via the DIBBS portal.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

PLUG, COMPRESSOR CAS

Solicitation # SPE4A7-27-T-1604

Solicitation SPE4A7-27-T-1604 is a fixed-price contract issued by the DLA Weapons Support ASC for the procurement of three units of Compressor Case Plugs (NSN 2840-01-668-3085). This is designated as a critical application item, requiring strict adherence to higher-level quality requirements via Procurement Note L32 and the provision of supply chain traceability documentation per DLAD Procurement Note C03. The items must be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a required delivery date of January 1, 2026, and a need ship date of May 24, 2026. The contract mandates rigorous quality and technical standards, including Item Unique Identification per MIL-STD-130 and CMMC Level 2 Self-Assessment. Packaging and marking must comply with MIL-STD-129 and MIL-STD-2073-1, specifically for kit packaging and palletization. Inspection and acceptance will occur at the destination, utilizing sampling methods from MIL-STD-1916 or ASQ H1331. Additionally, the contractor must comply with the Buy American Act, the Berry Amendment, and utilize the Wide Area WorkFlow system for all electronic invoicing and receiving reports.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

STATOR,TURBINE,FIRS

Solicitation # SPRMM126QMJ72

This fixed-price solicitation, issued by DLA Mechanicsburg, requires the manufacture and delivery of a Stator, Turbine, FIRS (NIIN 012763874) conforming to the design represented by Cage Code 72957, reference number 8W0180-4. The procurement is designated under NAICS code 333611 with a small business size standard of 1500. Delivery is required within 30 days on an FOB Destination basis, with the final shipment destined for the USS IWO JIMA LHD 7. The contract mandates strict adherence to quality and marking standards, including MIL-STD-130 for physical identification and MIL-STD-129 and MIL-STD-2073-1 for packaging and marking. Inspection and acceptance will occur at the source and origin, respectively, and the contractor must maintain all inspection records for 365 days following final delivery. Payment processing must be conducted electronically via the Wide Area Workflow (WAWF) system. Award evaluation will be based on risk assessments from the Supplier Performance Risk System (SPRS), focusing on item, price, and supplier risk. Additional requirements include compliance with Item Unique Identification and Valuation (IUID) and specific security prohibitions and exclusions.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Manufacturing of Aligning Sleeves (NSN 2835010146074)This subcontract involves the manufacture and supply of 471 precision aligning sleeves under NSN 2835010146074 for the DLA Weapons Support ASC Supplier Oper OEM Division. The contractor is responsible for precision machining and forming according to GE P/N 9115M71P01 specifications for critical application items. Performance requires the use of CNC machining equipment capable of maintaining strict aerospace tolerances, with a primary place of performance located in San Diego. Compliance is mandatory regarding mercury-free materials and adherence to MIL-STD-2073-1E and MIL-STD-129 packaging standards. The opportunity is categorized under NAICS code 333611 and was posted on October 18, 2026, with a response deadline of October 26, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Precision Manufacturing of Turbine Manifold (NSN 2835011822187)This subcontract involves the precision manufacturing of turbine manifolds under NSN 2835011822187 for prime contractors supporting the Defense Logistics Agency Weapons Support Aviation Supply Chain. The scope of work requires the fabrication of components using either industrial additive manufacturing systems or precision machining, ensuring strict adherence to the DLA Master List of Technical and Quality Requirements. Additionally, the provider must submit Source Approval Request documentation in accordance with RC001. The project is managed under NAICS code 333611 and will be performed in San Diego, California. Interested parties must meet the response deadline of October 26, 2026, to provide the finished turbine manifolds as specified in the technical requirements.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

MANIFOLD, TURBINE

Solicitation # SPE4A1-27-T-0165

Solicitation SPE4A1-27-T-0165 is a fixed-price contract issued by the DLA Weapons Support Aviation Supply Chain for the procurement of two turbine manifolds, identified by NSN 2835011822187 and General Electric part number L46244G01. This item is classified as a Commercial Off The Shelf critical application item. The required delivery date is April 4, 2028, with a need ship date of April 6, 2027, and a delivery window of 161 days after award. Shipping is FOB Origin, with the final destination being DLA Distribution San Diego, California. The contract mandates strict adherence to DLA technical and quality requirements, including source approval documentation per RC001 and packaging standards per MIL-STD-2073-1E and RP001. Marking must comply with MIL-STD-129. A critical material restriction prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information is required. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. Evaluation of offers may give preference to those proposing a delivery schedule shorter than the requested 161 days.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Pennsylvania → Bucks County

Same awarding agency

Crane and Rigging Services / Equipment DisposalThis subcontract for Crane and Rigging Services and Equipment Disposal involves the physical removal of an existing 60 kW generator and the installation of a new 130 kW generator at municipal building projects in Milford Township, Bucks County, Pennsylvania. The scope of work includes rigging and lifting the old unit for transportation and lawful disposal, as well as providing crane services to precisely place the new generator onto a concrete pad and ensuring overall site clearance. The project requires the use of certified rigging and crane operators to ensure safety and compliance. Interested parties must respond to the solicitation by October 30, 2026, for this specialized equipment placement project managed under NAICS code 484220.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Concrete Contractor for Equipment PadThis subcontract opportunity is for a concrete contractor to provide specialized services for municipal building projects in Bucks County, Pennsylvania. The scope of work involves the demolition and removal of an existing undersized concrete pad and the installation of a new reinforced concrete equipment pad. This new structure must be specifically engineered to support the load capacity of a 130 kW generator and its associated sub-base tank, ensuring full compliance with local building codes and manufacturer specifications. The project is categorized under NAICS code 238110 and is being coordinated through Bucks County. Interested parties must submit their responses by October 30, 2026, to be considered for the delivery of the completed reinforced concrete installation.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

Electrical Contractor for Emergency Power SystemThis subcontract opportunity is for a licensed electrical contractor to perform disconnection, installation, and commissioning services for emergency power systems at municipal building projects in Milford Township, Bucks County, Pennsylvania. The scope of work includes disconnecting a 60 kW generator, installing a 400A automatic transfer switch and a consolidated utility service entrance, and completing all necessary wiring. To ensure system reliability, the contractor must conduct a two-hour resistive load-bank test and adhere strictly to NFPA 110 standards. The selected contractor is responsible for delivering a fully operational power system along with as-built one-line diagrams. This project falls under NAICS code 238210. Interested parties must submit their responses by October 30, 2026, at 1:00 PM.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Emergency Back-Up Generator Replacement

Solicitation # Milford Township, Bucks County

Milford Township is soliciting sealed bids for a turnkey replacement of the emergency standby power system at the Municipal Building located at 2100 Krammes Road, Quakertown, Pennsylvania. The project involves the removal and disposal of an existing 60 kW generator and manual transfer equipment, the replacement of an undersized concrete pad with a new reinforced equipment pad, and the installation of a new 130 kW diesel-fueled standby generator. The scope includes a new 400-amp automatic transfer switch, consolidated utility service entrance equipment, all necessary electrical work, and a full initial fill of ultra-low sulfur diesel fuel. The installation must meet NFPA 110 level 2 compliance or greater and be EPA-certified for stationary use. Bids must be submitted online via PennBid by October 30, 2026, at 9:00 a.m. using forms provided by the Township. Required submission documents include a non-collusion affidavit, a 10% bid bond or certified check, and 100% performance and payment bonds. Qualified bidders must demonstrate experience with comparable industrial or governmental installations and identify a factory-authorized service organization for warranty and emergency support. The award will be based on a single lump-sum turnkey price. Final acceptance is contingent upon a successful two-hour resistive load-bank test and the delivery of closeout documents, including as-built electrical diagrams and a minimum two-year manufacturer's warranty.

POSTED

DEADLINE

Site Restoration and LandscapingThis subcontract opportunity for Site Restoration and Landscaping involves performing planting and restoration services for disturbed areas on municipal projects within Langhorne Manor Borough. The selected contractor will work under prime contractors to restore greenery and landscaping that was impacted during the access of equipment or manholes, ensuring that all site conditions are returned to the standards required by project specifications. The project is located in Bucks County, Pennsylvania, and falls under NAICS code 561730. Interested parties must submit their responses by the deadline of November 3, 2026, following the posting date of October 14, 2026.

Landscaping Services

POSTED

DEADLINE

Erosion and Sedimentation ControlThis subcontract opportunity involves the implementation of erosion and sediment control measures for prime contractors working on municipal projects within Langhorne Manor Borough, located in Bucks County, Pennsylvania. The selected provider will be responsible for installing silt fences and various other sediment control devices to effectively prevent runoff during surface-disturbing activities, ensuring all installations are compliant with specific project requirements. The solicitation was posted on October 14, 2026, with a response deadline of November 3, 2026. Classified under NAICS code 238990, the contract focuses on specialized environmental protection services to maintain site integrity and regulatory compliance throughout the duration of the municipal works.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Traffic Control and Safety ServicesThis subcontract for Traffic Control and Safety Services involves providing essential traffic management devices and planning for prime contractors working on municipal projects within Langhorne Manor Borough. The scope of work includes the installation of warning lights, signage, and barricades in public rights-of-way to ensure the creation of safe work zones. Additionally, the contractor is responsible for developing and submitting traffic control plans to PennDOT to secure necessary permits for state roads, specifically including US Route 1. The project is located in Bucks County, Pennsylvania, and falls under NAICS code 238990. Interested parties must submit their responses by the deadline of November 3, 2026. This engagement focuses on maintaining regulatory compliance and public safety through approved permitting and professional traffic control implementation.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Sewer Bypass Pumping ServicesThis subcontract for Sewer Bypass Pumping Services involves providing temporary sewage diversion to support prime contractors on municipal projects within Langhorne Manor Borough, Bucks County, Pennsylvania. The scope of work requires the installation of inflatable rubber bladders and the operation of pressure-rated intake and discharge hoses to ensure a continuous, leak-free flow of sewage during construction operations. A critical technical requirement is the use of diesel pumps that are critically silenced to maintain noise levels at or below 75 dBA. Interested parties must submit their responses by November 3, 2026, for this project categorized under NAICS code 562991.

Septic Tank and Related Services

POSTED

DEADLINE

Sanitary Sewer Chemical GroutingThis subcontract for Sanitary Sewer Chemical Grouting involves sealing sewer pipe joints that show active infiltration for prime contractors working on municipal projects within Langhorne Manor Borough, Bucks County, Pennsylvania. The scope of work requires the formation of collars around joints and the injection of chemical grout using AV118 Duriflex or an approved equivalent. To ensure quality and compliance, the contractor must perform packer, pump, and grout tests in accordance with NASSCo Standard Specifications. The final deliverable consists of sealed pipe joints that have been fully verified through these testing procedures. Interested parties must respond by November 3, 2026.

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE

Sanitary Sewer CCTV Inspection and MappingThis subcontract for Sanitary Sewer CCTV Inspection and Mapping involves performing televideo inspections of approximately 33,000 linear feet of sanitary sewers for prime contractors on municipal projects within Langhorne Manor Borough, Bucks County, Pennsylvania. The scope of work includes conducting CCTV inspections, panning up at laterals to witness flow, and recording the horizontal and vertical locations of utilities using robotic camera systems in accordance with NASSCo Standard Specifications. The selected contractor is responsible for delivering comprehensive inspection video data and certified Record Drawings. This opportunity is categorized under NAICS code 541370, with a response deadline set for November 3, 2026.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

Langhorne Manor Borough CCTV Inspection of Sewer System - Contract #LMB-1

Solicitation # LMB-1

Langhorne Manor Borough is soliciting sealed bids for contract LMB-1, which involves the televideo inspection of approximately 33,000 lineal feet of sanitary sewers. The scope of work requires panning up at each lateral to witness active flow and the submission of certified record drawings at project closeout. The project must be substantially completed within 60 days of the commencement date established by the Notice to Proceed. Bids are due via PennBid by 1:00 P.M. on Tuesday, November 3, 2026. Qualified bidders must submit their proposals on a unit price basis and include a bid bond or certified check for 10 percent of the bid price. The award will be based on the best interests of the project, considering bidder and subcontractor qualifications, financial ability, and compliance with prescribed requirements. The successful contractor must provide performance and payment bonds, adhere to the Pennsylvania Prevailing Wage Act, and comply with the Public Works Employment Verification Act through the federal E-Verify Program. All work must meet specific PADEP, PennDOT, and federal standards, with consulting oversight provided by Carroll Engineering Corporation.

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS