Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on July 17, 2013. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Differential Scanning Calorimeter and Thermogravimetric Analyzer

Awarded
FA8601-13-T-0201Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334516
New
Federal
Off-Axis Parabolic Mirrors
Solicitation # FA860127Q0003
The Air Force Life Cycle Management Center, on behalf of the Air Force Institute of Technology, is conducting market research via a Sources Sought notice to identify qualified sources for the manufacture and delivery of 66 customized off-axis parabolic mirrors and associated protected-gold coating services. These precision optical components are intended for use in the Extreme Light Laboratory to support ultra-intense laser experiments. The mirrors must feature a 30mm diameter fused-silica substrate with a parabolic focus at 45 degrees, a surface roughness of less than 1nm RMS, and a scratch/dig specification of 20-10. The required protected-gold coating must provide an average reflectivity of at least 97 percent at a wavelength of 780 plus or minus 40nm with a 45-degree angle of incidence. The selected contractor will be responsible for all labor, materials, quality assurance, and transportation to Wright-Patterson Air Force Base, Ohio. Key deliverables include the mirrors and comprehensive test data, including certificates of conformance and surface-measurement data. Delivery is required within 98 calendar days after receipt of order, and the equipment must be warranted against defects for two years following receipt. Payment terms are set at 100 percent after delivery, net 30 days from the invoice date. Interested parties under NAICS code 334516 must submit a capability package by October 23, 2026.
FA8601 Aflcmc Pzio

POSTED

about 6 hours ago

DEADLINE

in 3 days
NAICS: 334516
New
Federal
Flight Model Solar Array Wings
Solicitation # 80NSSC27946791Q
NASA/NSSC is seeking capability statements for the procurement of flight-qualified solar array wings for the TERP RAPTOR 12U CubeSat mission to asteroid Apophis. The requirement includes the acquisition and delivery of one flight model consisting of two solar array wings, each featuring 20 solar cells, hinges, spacers, and a thermal knife deployment system. The scope of work encompasses a comprehensive test campaign involving vibrations, TVAC, and bake-out tests, as well as the delivery of interface documentation, software, and calibration data. The contractor must also provide technical support during solar panel acceptance, spacecraft integration, and initial functional verification at the NASA Goddard Space Flight Center in Greenbelt, Maryland. This procurement is being conducted under FAR Part 12 for commercial items, with a planned period of performance for unit testing and integration from July 1, 2027, through October 31, 2027. While NASA/NSSC intends to issue a sole source contract to DHV Technology under FAR 12.102(a), they are currently requesting capability statements to determine if the procurement should be conducted on a competitive basis. Interested parties must submit their qualifications in writing to the designated point of contact by October 28, 2026. Please note that quotes will not be evaluated at this stage, and all correspondence must reference the notice ID 80NSSC27946791Q.
National Aeronautics And Space Administration

POSTED

about 6 hours ago

DEADLINE

in 8 days
NAICS: 334516
New
Federal
ICP-OES for Oil Analysis
Solicitation # W911S227U0057
Solicitation W911S227U0057 is a Request for Quotation for the procurement of new equipment for the material analysis lab at Yuma Test Center, specifically an Inductively Coupled Plasma-Optical Emission Spectrometer (ICP-OES) and a compatible autosampler. The ICP-OES must feature a radial torch with radial view, oxygen burn capability, chiller-free operation, and the ability to integrate a Catech ASXpress system and export data via .csv for LIMS entry. The autosampler must include a mixing or stirring head, a sample induction head, and a capacity for up to 384 samples across four 96-position test tube racks, with dimensions not exceeding 20 by 24 by 24 inches. Both items must be designed to meet ASTM D-5185 and Caterpillar SOS program performance standards. This acquisition is a Total Small Business Set-Aside under NAICS code 334516, managed by the W6QM Micc-Ft Drum. Award will be granted to the responsible offeror whose proposal is most advantageous to the government, based on an evaluation of price and technical factors. Only new equipment will be accepted; used or remanufactured products are prohibited. Offers of equal products must provide brand names, model numbers, and descriptive literature to prove compliance with salient characteristics. Delivery is required F.O.B. destination, with a preferred timeframe of 30 days. Quotes must be submitted through the PIEE Solicitation module by November 14, 2026.
W6QM Micc-Ft Drum

POSTED

about 6 hours ago

DEADLINE

in 25 days
NAICS: 334516
New
SLED
Laboratory Equipment, Microscope & Accessories (Supply and Install) (Echo Revolve)
Solicitation # 40-27
Solicitation 40-27, issued by the New Hampshire Department of Administrative Services, seeks bids for the supply, delivery, and turn-key installation of an Echo Revolve R4 Upright Microscope and associated accessories for the NH Department of Fish and Game in Concord, New Hampshire. The required equipment is a hybrid fluorescence microscope capable of flipping between upright and inverted modes, featuring a 12.9-inch iPad Pro Retina display. Key deliverables include the microscope system, specific LED light cubes, various objective lenses, an ELWD universal condenser, stage inserts, and a digital haze reduction software module. The successful vendor must complete delivery and installation within 45 business days of the contract award. The contract will be awarded to the responsible vendor who submits a conforming bid meeting all technical specifications at the lowest total cost. Bids are due by October 23, 2026, and must be submitted via email to the Bureau of Purchase and Property. Vendors are required to provide proof of comprehensive general liability insurance of at least 1 million dollars per occurrence and 2 million dollars aggregate, as well as workers compensation insurance. Environmental guidelines encourage the elimination of PVC and polystyrene and the use of SmartWay transport partners. Payment terms are set at 30 days following the receipt of an itemized invoice after the equipment has been delivered, inspected, and accepted by the agency.
Das Purchasing (statewide Bids & Contracts)

POSTED

1 day ago

DEADLINE

in 3 days
NAICS: 334516
New
SLED
MFO Teledyne Items G. Curvin 10/19/26
Solicitation # SRC0000037208
Solicitation SRC0000037208 is issued by the Alabama Environmental Management agency for the procurement of a Teledyne API Model N100 SO2 Analyzer. The device must utilize the UV fluorescence principle and adhere to the US EPA Automated Equivalent Method EQSA-0495-100, featuring a lower detectable limit of 0.4 ppb or less and a response time of less than 120 seconds to 95%. Required accessories include a long-life sample filter holder assembly and two rack mount kits. The contract is capped at a total value of 25,000 dollars and may be renewed annually for up to five years. The State of Alabama will evaluate bids based on price reasonableness, cost realism, and supplier qualifications, which may include requests for professional licenses, insurance certificates, and manufacturer reseller authorizations. Suppliers must be registered in Alabama Buys and submit responses electronically. Key compliance requirements include E-Verify enrollment for Alabama-based employees, certification of no boycott activities, and adherence to Alabama state and local tax regulations. Payment is handled electronically via P-cards, EFT, or state-issued credit cards, with price escalations limited to 5 percent of the annual contract cost. The State retains the right to inspect all products after delivery before final acceptance.
ENVIRONMENTAL MANAGEMENT

POSTED

1 day ago

DEADLINE

in 1 day
NAICS: 334516
New
DIBBS
Supply of Special Scale Meters (NSN 6625-01-541-0598)This subcontract involves the procurement of two Special Scale Meters under NSN 6625-01-541-0598 to support prime contractors for the DLA Weapons Support Maritime Supply Chain. The selected provider is responsible for sourcing or manufacturing the meters and ensuring all units adhere to strict military specifications. This includes marking according to MIL-STD-129 and packaging in compliance with RP001 and MIL-STD-2073-1E. Additionally, the contractor must provide hazard warning labels as required by 29 CFR 1910.1200 and DFARS 252.223-7001 where applicable. The contract falls under NAICS code 334516 and requires delivery of the units FOB Origin to DLA Distribution DDSP in New Cumberland. Interested parties must submit their responses by October 30, 2026. This effort is managed through the Department of Defense to ensure the continued operational readiness of maritime supply chain weapons support.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
NAICS: 334516
New
DIBBS
Supply of Dräger Carbon Dioxide Measuring TubesThis subcontract involves the manufacture and supply of specialized round glass measuring tubes with melted tips for prime contractors supporting Department of Defense DLA supply contracts. The tubes must be produced according to Dräger Carbon Dioxide 100/A-P specifications, featuring a measuring range of 100 to 3000 ppm for 1 liter of air. The final delivery consists of two packages of gas analyzer measuring tubes. Compliance is required with ASTM D3951 packaging and Medical Marking Standard No. 1. The contractor must ensure that all items are delivered within three months of manufacture. This requirement is managed under NAICS code 334516 for the Medical Supply Chain FSH agency, with the place of performance located at FPO 96692-1100.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days
NAICS: 334516
New
DIBBS
Gas Analyzer Supplier (NSN 6630016713921)This subcontract involves the supply of two specialized gas analyzer units for prime contractors supporting Department of Defense medical equipment procurements through the Medical Supply Chain FSH. The equipment must adhere to NSN 6630016713921 specifications, featuring an internal pump, a digital LCD display, and a selectable carrier gas option for either oxygen or air. These units are specifically required to measure vaporizer output concentrations for Halothane, Isoflurane, Sevoflurane, and Desflurane. The procurement falls under NAICS code 334516 and is managed by the Department of Defense. The place of performance is designated as APO 96260-5479. Interested parties must note the response deadline of October 26, 2026, following the posting date of October 19, 2026.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days
NAICS: 334516
New
DIBBS
MEASURING TUBE, GAS ANA
Solicitation # SPE2DH-27-T-0214
Solicitation SPE2DH-27-T-0214 is a procurement by the Defense Logistics Agency for the supply of gas analyzer measuring tubes, specifically the Draeger Carbon Dioxide 100/A-P. These round glass tubes with melted tips are designed to measure carbon dioxide content in compressed gases with a range of 100 to 3000 parts per million per liter of air. The requirement consists of three line items, each for one package containing 10 tubes. Delivery is required within 20 days after the order, with shipments destined for the USS Carl M. Levin, USS William P Lawrence, and USS Thomas Hudner. The contract mandates a non-extendable shelf life of 24 months, with a requirement that no more than 3 months elapse between the date of manufacture and delivery to the government. Packaging must adhere to ASTM D3951 and DLA packaging requirements, while marking must comply with Medical Marking Standard No. 1. Invoicing and payment are processed electronically through the Wide Area WorkFlow system. The procurement is governed by NAICS code 334516 and includes various FAR and DFARS clauses regarding equal opportunity, combatting trafficking in persons, and the Buy American Act. Destination inspection is required per FAR 52.246-2.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days
NAICS: 334516
New
DIBBS
GAGE, GRIP SPACING
Solicitation # SPE8E5-27-T-0262
Solicitation SPE8E5-27-T-0262 is a fixed-price procurement issued by the Defense Logistics Agency Troop Support for one Grip Spacing Gage, identified by NSN 5220001823779 and part number T101559 from Rotair Aerospace Corp or Bell Textron Inc. The required delivery date is October 20, 2026, with a delivery window of five days after the order. Shipping is FOB Origin and will be delivered to the USA DEP Corpus Christi in Texas. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-1. The contractor must adhere to strict packaging and marking standards, including ASTM D3951, MIL-STD-129, and MIL-STD-130N, with DLA Master List requirements taking precedence. Palletization must comply with RP001. Invoicing and payment processing are required through the Wide Area WorkFlow system. This procurement is subject to various federal regulations, including the Buy American Act, DFARS cybersecurity requirements for safeguarding covered defense information, and specific representations regarding small business size standards under NAICS code 334516.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 10 days
NAICS: 334516
New
DIBBS
ANALYZER, GAS
Solicitation # SPE2DH-27-T-0217
Solicitation SPE2DH-27-T-0217 is a request for quotations from the Department of Defense, specifically the Medical Supply Chain FSH, for the procurement of two gas analyzers under NSN 6630-01-671-3921. The required devices must feature an internal pump, a digital LCD display, and the ability for users to select between O2 or air as the carrier gas. These analyzers are designed to measure the concentration percentage of Desflurane, Sevoflurane, Isoflurane, and Halothane. Each unit must be delivered with a sampling tube, a carrying case, and a T-shaped sampling piece. Bidders are required to specify the source and part number being supplied and must provide a complete data package if proposing an alternate part. The contract specifies a delivery period of 88 days with a required delivery date of October 19, 2026, shipped FOB Destination to the USA Medical Materiel Center in Korea. Compliance with Medical Marking Standard No. 1 and MIL-STD-2073-1E for packaging is mandatory, with each unit required to be in a sealed container. The acquisition falls under NAICS code 334516 and incorporates various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting requirements. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Inspection and acceptance will occur at the destination point in accordance with FAR 52.246-2.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days
NAICS: 334516
New
SLED
Supply of Portable Non-Nuclear Density Gauge
Texas Department of Transportation

POSTED

1 day ago

DEADLINE

in 13 days

General Info

Agency

Department Of Defense → FA8601 Aflcmc Pzio

Contract Value

$76,010

NAICS

334516 - Analytical Laboratory Instrument Manufacturing

Place of Performance

Wright-Patterson Air Force Base, WPAFB, OH, 45433, USA

Set-Aside

NONE

Awardee

TA INSTRUMENTS - WATERS L.L.C.

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

1 update
PhaseAwarded
Posted

Combined Synopsis

Notice updated

The notice description changed.

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA8601 Aflcmc Pzio
Contacts2 people available
OfficeWRIGHT PATTERSON AFB, OH, 45433-5344, USA
Organization / AgencyDepartment Of Defense → FA8601 Aflcmc Pzio
Office AddressWRIGHT PATTERSON AFB, OH, 45433-5344, USA
Contacts
Charles J. Bowers
contact@example.gov
+1 (555) 000-0000
Keith M. Brandner
contact@example.gov
+1 (555) 000-0000

More opportunities from Department Of Defense → FA8601 Aflcmc Pzio

Same awarding agency

NAICS: 484220
New
Federal
Optical Calibration and Specialized Transport ServicesThis subcontract for Optical Calibration and Specialized Transport Services supports prime contractors on Air Force Institute of Technology projects under the Department of Defense. The scope of work involves the technical calibration of MWIR instruments and lenses to specific AFIT/EN standards, as well as the secure management of sensitive scientific equipment. Responsibilities include the loading, unloading, and storage of hardware from the factory through final onsite setup at Wright Patterson AFB. The selected provider is required to deliver the fully calibrated instrument along with a formal calibration data report. This opportunity is categorized under NAICS code 484220 and was posted on October 14, 2026, with a response deadline of October 29, 2026.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 333314
New
Federal
Optical Filter Wheel and Protective Housing SupplierThis subcontract involves the supply of specialized optical accessories for prime contractors supporting Air Force Institute of Technology projects. The scope of work requires the delivery of a four-position user-configurable filter wheel designed for one-inch filters, along with three blank filter holders and ruggedized protective transit cases intended for the lens, instrument, and associated computers. Managed by the Department of Defense under the FA8601 Aflcmc Pzio agency, the contract is categorized under NAICS code 333314. Performance of the contract will take place at Wright Patterson Air Force Base. The solicitation was posted on October 14, 2026, with a response deadline set for October 29, 2026.
Optical Instrument and Lens Manufacturing

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 541511
New
Federal
Imaging Control Software and Computer IntegrationThis subcontract, titled Imaging Control Software and Computer Integration, involves providing computer controllers and specialized analysis software to prime contractors supporting Air Force Institute of Technology projects. The scope of work focuses on integrating a computer controller compatible with MWIR camera hardware and implementing high-speed infrared imagery processing software that includes real-time temperature calibration functionality. Managed by the Department of Defense under the FA8601 Aflcmc Pzio agency, the project will be performed at Wright Patterson AFB. The final deliverables consist of the installed computer controller and the corresponding licensed analysis software. The solicitation was posted on October 14, 2026, with a response deadline of October 29, 2026, under NAICS code 541511.
Custom Computer Programming Services

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 334511
New
Federal
Midwave Infrared (MWIR) Camera and Optics SupplierThis subcontract involves the procurement of a high-speed midwave infrared camera system and associated optics to support prime contractors on Air Force Institute of Technology projects. The required hardware must feature a 1.5-5 micron range, a focal plane array size of at least 640x512, a full frame rate exceeding 1 kHz, and an exposure time of 300 nanoseconds or less. The delivery includes the physical MWIR camera instrument, a lens with a focal length under 5 meters, and a mount designed to prevent rotation. Managed by the Department of Defense under the FA8601 Aflcmc Pzio agency, the work is to be performed at Wright Patterson AFB. The opportunity was posted on October 14, 2026, with a response deadline of October 29, 2026. The contract falls under NAICS code 334511 for the supply of specialized imaging equipment.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 327213
New
Federal
Fused-Silica Substrate SupplyThis subcontract, managed by the Department of Defense under the Air Force Life Cycle Management Center, involves the supply of high-purity fused-silica blanks for prime contractors. The primary objective is to source and deliver raw fused-silica substrates that meet strict purity and homogeneity standards necessary for ultra-intense laser experiments. To ensure quality and compliance, the provider must supply all necessary material certifications and grade documentation. The project is associated with NAICS code 327213 and will be performed at Wright Patterson AFB. Interested parties should note that the solicitation was posted on October 14, 2026, with a response deadline of October 23, 2026.
Glass Container Manufacturing

POSTED

6 days ago

DEADLINE

in 3 days
View Details
NAICS: 332813
New
Federal
Protected-Gold Optical CoatingThis subcontract, issued by the Department of Defense under the Air Force Life Cycle Management Center, involves the high-precision vacuum deposition of protected-gold coatings for optical surfaces. The project requires the application of coatings to 66 OAP mirrors to achieve an average reflectivity of at least 97% at 780 plus or minus 40 nm with a 45-degree angle of incidence. Performance will be executed using PVD/Sputtering systems and verified via spectrophotometers. The work is designated under NAICS code 332813 and will be performed at Wright Patterson AFB. The solicitation was posted on October 14, 2026, with a response deadline of October 23, 2026.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

6 days ago

DEADLINE

in 3 days
View Details
NAICS: 334516
New
Federal
Fused-Silica OAP Mirror FabricationThis subcontract involves the fabrication of customized off-axis parabolic mirrors for prime contractors supporting Air Force Life Cycle Management Center projects. The scope of work requires grinding and polishing fused-silica substrates to a 30 mm diameter with a 45-degree parabolic focus and polished backsides. To ensure high precision, the mirrors must achieve an optical surface roughness of less than 1 nm RMS and meet 20-10 scratch/dig specifications, verified through the use of surface profilometers and precision polishing equipment. The final deliverable consists of 66 polished, uncoated mirrors along with corresponding test data. This project is managed under the Department of Defense through the FA8601 Aflcmc Pzio agency, with the place of performance located at Wright Patterson AFB. The contract falls under NAICS code 334516.
Analytical Laboratory Instrument Manufacturing

POSTED

6 days ago

DEADLINE

in 3 days
View Details
NAICS: 334516
New
Federal
Sources Sought_Midwave Camera
Solicitation # FA860127Q0011
The Air Force Life Cycle Management Center, Installation Contracting Division, is conducting market research to identify potential sources capable of providing a 1.5-5 micron midwave camera and associated accessories for the Air Force Institute of Technology at Wright-Patterson Air Force Base, Ohio. This sources sought notice is for market research purposes only and is not a request for proposals. The government is seeking capabilities packages from all interested sources, including various small business categories, under NAICS code 334516. Interested firms must submit a concise capabilities package of no more than five pages by October 29, 2026, at 3:00 PM Eastern Time to the designated points of contact. The scope of work includes the delivery of the camera system, calibration of the instrument and lens, and the provision of a protective case. The contractor will be responsible for all transportation, loading, and onsite setup, with a required delivery timeline of no more than 90 days after contract award. Technical specifications include an operating temperature range of -10 C to 45 C and a two-year warranty against defects in material and workmanship. Payment is structured as 100% upon completion of all requirements on a net 30 basis, with invoicing processed through Wide Area Work Flow. The government is evaluating the potential for a small business set-aside and requires respondents to provide detailed information regarding their socio-economic status, ownership, and compliance with FAR clause 52.219-14 regarding limitations on subcontracting.
Analytical Laboratory Instrument Manufacturing

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 236220
New
Federal
SABER FY 27-32
Solicitation # FA860126R0019
The United States Air Force is soliciting proposals for the Simplified Acquisition of Base Engineering Requirements (SABER) FY27-32, a 100% 8(a) small business set-aside IDIQ contract. The selected contractor will provide all management, labor, materials, equipment, and design capabilities to execute over 100 simultaneous projects involving maintenance, repair, and minor construction of real property at Wright-Patterson Air Force Base, Ohio. The scope includes work on buildings, roads, roofs, and utilities, as well as hazardous waste remediation and design-build services from concept to 100 percent design. The contract has a maximum ceiling of 160 million dollars, which increases to 175 million dollars if the option for extended services is exercised. Performance is expected to begin within 10 days of award and spans a total period of 1,825 calendar days. Award will be based on the Lowest Price Technically Acceptable (LPTA) process. Proposals must first pass compliance gates, including a requirement for the prime contractor to be a US-owned and operated company. Technical evaluations are conducted on a pass/fail basis, focusing on the management approach and project planning and execution. Pricing is structured using RS Means line items and coefficients. Proposals must be submitted electronically via the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module. Key requirements include adherence to Davis-Bacon Act wage determinations for Montgomery and Greene Counties, compliance with NIST SP 800-171 cybersecurity standards, and the provision of a minimum one-year warranty on all construction work.
Commercial and Institutional Building Construction

POSTED

6 days ago

DEADLINE

in 3 days
View Details
NAICS: 238160
Federal
Commercial Roofing ServicesThis subcontract for Commercial Roofing Services involves the repair and replacement of facility roofs at Wright-Patterson Air Force Base. Working under prime contractors for the Department of Defense, the selected provider will be responsible for executing roof installations, leak repairs, and full system restorations to deliver completed and warranted roofing systems. The opportunity is designated as an 8(a) set-aside under NAICS code 238160 and is managed by the AFLCMC PZIO agency. Interested parties must submit their responses by October 23, 2026.
Roofing Contractors

POSTED

12 days ago

DEADLINE

in 3 days
View Details
NAICS: 237310
Federal
Paving and Grounds MaintenanceThis 8(a) set-aside subcontract, managed by the Department of Defense under the FA8601 Aflcmc Pzio agency, focuses on paving and grounds maintenance at Wright-Patterson Air Force Base. The selected contractor will support prime contractors by performing essential construction and repair work on roads and facility grounds, specifically delivering paving services, road surface repairs, and general grounds maintenance. The opportunity is categorized under NAICS code 237310. Interested parties must note that the solicitation was posted on October 8, 2026, with a response deadline set for October 23, 2026.
Highway, Street, and Bridge Construction

POSTED

12 days ago

DEADLINE

in 3 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS