Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Digital Aeronautical Chart Production

Active

International

Response Deadline08/17/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the production, updating, and quality assurance of digital aeronautical charts and navigation products for the Royal Canadian Air Force, with all deliverables required to meet Operational Airworthiness standards. Work must ensure accurate, timely, and secure data delivery to support flight safety and mission readiness across Canadian airspace. The products are critical for operational navigation and must be maintained to the highest technical and regulatory specifications to align with national and international aviation norms. This is a subcontract under the Department of National Defence, part of the Government of Canada, with performance centered in the National Capital Region. The solicitation was posted on July 30, 2026, and responses are due by August 17, 2026. It falls under NAICS code 334511, which relates to navigation and measuring equipment manufacturing, indicating the technical and precision-driven nature of the work. The contract does not specify set-aside status or point of contact details, and all activities must comply fully with government procurement protocols and aerospace data integrity requirements.

General Info

Production and QA of secure digital aeronautical charts for Royal Canadian Air Force under National Defence subcontract.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

National Capital Region (NCR), CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 07:00:00 PM UTCin 16 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Production, updating, and quality assurance of digital aeronautical charts and navigation products for RCAF, compliant with Operational Airworthiness standards.

Similar Contracts

Same NAICS industry code

DETECTOR, RADIO FREQUENCY

Solicitation # SPE4A6-26-R-XC21

The contract pertains to the procurement of a Radio Frequency Detector under solicitation SPE4A6-26-R-XC21, a total small business set-aside with a ceiling value of $250,000, awarded through an indefinite-delivery, indefinite-quantity (IDIQ) structure with a five-year term. The item, identified by NSN 5895-01-211-0211, requires full compliance with military packaging standards MIL-STD-2073-1E and marking requirements under MIL-STD-129, including bold external labeling of “First Article Exhibits - Do Not Post to Stock” for FAT samples. The contractor must establish and maintain an inspection system compliant with FAR 52.246-2 or 52.246-3, retain all records supporting conformance, and provide written notice at least 14 days before shipment if DCMA assumes quality admin responsibilities. First Article Test reports must follow the DI-NDTI-80809B format, include confirmation that production units will be manufactured using the same processes and facilities, and be submitted to designated DLA monitoring addresses based on the issuing activity—Aviation, Land, Maritime, or Troop Support—with preferred electronic routing. For Government-performed FAT, units must be shipped via traceable carriers with hard-copy attachments including contract documents, certifications, drawings, and a pre-paid return label, while external packaging must display mandatory markings and internal packages must include a receipt documentation copy. The contract mandates electronic invoicing exclusively through WAWF and adherence to stringent supply chain controls, including prohibitions on covered telecommunications equipment per DFARS 252.204-7016 and FAR 52.204-24, alongside federal sustainability, hazardous materials, and sick leave requirements. Delivery schedules stipulate 120 days for FAT unit shipment, another 120 days for Government evaluation, and 378 days for final production delivery after FAT approval, with FOB destination terms applying to FAT samples. Offerors must represent their small business status, UEI, and CAGE code in SAM, and disclose any use of restricted equipment, involvement with sanctioned countries, or inverted corporate status. All proposals must be submitted electronically via DIBBS or email to the designated point of contact, with no paper submissions permitted. The award will be based on a best-value trade-off, weighing past

ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Bluetooth Beacon Supply

256-NETWORK Contract Office 16 (36C256)

POSTED

about 14 hours ago

DEADLINE

Supply of AN/PEQ-15 ATPIAL Laser UnitsThe contract requires the delivery of three AN/PEQ-15 Advanced Target Pointer/Illuminator Aiming Lasers, each equipped with both visible and infrared lasers along with an infrared illuminator, designed to be compatible with Picatinny rails for secure mounting on firearms. These units are intended for tactical use, providing precision target designation and low-light illumination capabilities. The solicitation is classified as a subcontract under NAICS code 334511, which pertains to the manufacturing of electronic components and equipment, specifically indicating this is not a direct government procurement but likely a tiered supply arrangement. The opportunity was posted on July 31, 2026, with a strict response deadline of August 17, 2026, at 10:00 PM Eastern Time. The contracting entity is identified as the Police agency under the jurisdiction of California, though no specific city or office address is provided. The place of performance and point of contact information are also left unspecified, suggesting the details may be handled internally or released upon award. The procurement is accessible via a public portal link, indicating transparency in the process but no set-aside preferences or socioeconomic categories have been designated for this award.

POSTED

DEADLINE

Supply of Moxa Industrial Networking HardwareThe contract calls for the procurement and delivery of new Moxa-branded industrial networking hardware, including field-grade network equipment, power supplies, SFP modules, optical transceivers, and all necessary associated components. All items must fully comply with technical specifications and meet the stringent requirements set forth by the Texas Department of Transportation to ensure reliability and interoperability in transportation infrastructure environments. The equipment is intended for deployment in field applications where durability, performance, and environmental resilience are critical. Subcontractors are required to respond by the deadline of August 14, 2026, and the opportunity is categorized under NAICS code 334511 for communications equipment manufacturing. The contract is issued under the Texas Department of Transportation and performance is expected across the state, with no specific location designated. While no set-aside provisions are indicated, bidders must demonstrate adherence to technical standards and timely delivery capabilities to be considered for award. All submissions must be made through the designated Texas DOT procurement portal.

Texas Department Of Transportation

POSTED

DEADLINE

352i-ATC Cabinet Supply (Model-Specific)

County of Riverside

POSTED

DEADLINE

Red Flash Program Block and Fail-Safe Components Supply

County of Riverside

POSTED

DEADLINE

Traffic Signal Controller Cabinet Supply and Integration

County of Riverside

POSTED

DEADLINE

IWQ 134772 Acrulog Detectors

Solicitation # PE-77023-NONST-2027-000000690

Gwinnett County Government is soliciting quotes for Acrulog Detectors under solicitation number PE-77023-NONST-2027-000000690, with a response deadline of August 7, 2026, at 7:50 PM. The solicitation, posted on July 31, 2026, is open to eligible vendors and falls under the SLED classification, indicating it is for state, local, or educational government procurement. All submissions must come from firms not on Gwinnett County’s ineligible source list; any firm currently debarred, suspended, or otherwise prohibited from doing business with the county will have their proposals rejected without consideration, even if they receive automatic solicitations. The point of contact for inquiries is Jenny Coleman, reachable by phone at 770-822-8734 or email at Jenny.Coleman@gwinnettcounty.com. The place of performance is within the state of Georgia, and further details can be accessed via the provided state procurement portal link.

Gwinnett County Government

POSTED

DEADLINE

Notice of Intent to Sole Source - GPS-based safety monitoring solution

Solicitation # 20260314

The City of Port St. Lucie is seeking to sole source a GPS-based safety monitoring solution under solicitation number 20260314, with a response deadline of August 10, 2026 at 6:00 PM Eastern Time. This solicitation, issued by the Police Department under the State of Florida, aims to enhance public safety through technology and is open to qualified vendors who can meet the specified requirements. Contractors may submit either a traditional hard-copy bid bond or an electronic bid bond through the approved Surety2000 platform, in accordance with the bond and letter of credit provisions outlined in Section 5.1 of the solicitation. The primary point of contact for inquiries is Brianne Nasso, Manager of Police Grant & Travel, reachable at 772-807-4426 or bnasso@cityofpsl.com, with Alaina Knofla, Procurement Contracting Officer III, also available for support at 772-871-5144 or aknofla@cityofpsl.com. The physical location for performance is not specified, but the issuing agency is based in Port St. Lucie, Florida, with the online portal accessible via the provided UI link for additional details.

POSTED

DEADLINE

Supply of Wireless Vehicle Detection SensorsThe City of Sandy Springs is procuring 60 Sensys Networks FlexMag2 wireless vehicle-detection sensors, model VSN240-F-2, to enhance the performance of its SCOOT traffic-signal system. These sensors will be deployed to accurately detect vehicle presence and movement, enabling real-time optimization of traffic signal timing to improve flow, reduce congestion, and increase road efficiency. The contract is structured as a subcontract and falls under NAICS code 334511, indicating classification within the manufacturing of communication equipment. All sensors must be delivered in full compliance with technical specifications to ensure seamless integration with existing infrastructure. The solicitation was posted on July 31, 2026, with responses due by September 1, 2026, at 5:00 PM. The place of performance and detailed delivery logistics are not specified beyond the city’s jurisdiction, and the contract is managed under the Georgia state procurement system.

City of Sandy Springs

POSTED

DEADLINE

in about 1 month

Training Facility and Lab Equipment SupportThe contract encompasses the supply, installation, and ongoing technical support for Woodward EasYgenXT and LS control system hardware, simulators, and lab stations specifically designated for hands-on training in Fort Collins. The equipment will be deployed to establish a functional training facility where personnel can engage with real-world control systems to build and reinforce technical competencies. All hardware must be delivered, configured, and commissioned in alignment with operational requirements, ensuring full functionality for training scenarios and long-term reliability. Technical support services are a critical component and must include prompt resolution of issues, system updates, and maintenance to sustain uninterrupted training operations. The effort is scoped under a subcontract for the Department of Homeland Security, with performance centered at the Fort Collins location, zip code 80524. The solicitation, posted on July 31, 2026, requires proposals to be submitted by August 10, 2026, and falls under NAICS code 334511, indicating the work involves the manufacturing of industrial control systems. While no set-aside designation is specified, the procurement is managed by the Sflc Procurement Branch 1, and full compliance with technical specifications, delivery timelines, and support protocols is essential. The successful vendor must demonstrate proven experience with Woodward control systems, strong logistical capabilities, and the ability to provide sustained technical assistance to maintain training readiness.

Sflc Procurement Branch 1(00080)

POSTED

DEADLINE

Small Business Set-Aside Supply of Commercial ProductsThis contract opportunity is a small business set-aside for the supply of commercial products, specifically focusing on avionics or related systems, reserved exclusively for small businesses to compete. The solicitation is issued under the NAICS code 334511, which pertains to aircraft manufacturing, and is managed by the Naval Air Warfare Center Air Division under the Department of Defense. Performance of the contract is required at Saint Inigoes, Maryland, with a zip code of 20684. The opportunity was posted on July 31, 2026, and all responses must be submitted by August 4, 2026, at 8:00 PM Eastern Time. It is structured as a subcontract, meaning the successful bidder will likely be working under a prime contractor rather than directly with the government. The total set-aside status ensures only certified small businesses are eligible to bid, providing a targeted pathway for small business growth within defense-related aerospace supply chains.

Naval Air Warfare Center Air Division

POSTED

DEADLINE

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

Spare parts for Construction Engineering Equipment

Solicitation # W8486-270850/A

The Department of National Defence is seeking competitive bids for spare parts required for construction engineering equipment under solicitation W8486-270850/A, with a firm delivery deadline of November 1, 2026, to be split between 25 Canadian Forces Supply Depot in Montreal, Quebec, and 7 Canadian Forces Supply Depot in Edmonton, Alberta. The requirement encompasses ten distinct line items including radiator cores, air cleaner filter elements, track roller idler assemblies, retaining pins, cooling system pumps, hand-driven engine priming pumps, rim assemblies, and track shoes, all specified by military part numbers and National Stock Numbers, with the sole authorized manufacturer identified by CAGE code 11083. Bidders may propose equivalent or substitute products but must clearly state the brand, model, part number, and CAGE code. Offers must be submitted exclusively by email to the designated receiving address by August 4, 2026, at 2:00 PM EDT, and any proposals directed to the contracting authority directly or arriving after the deadline will be rejected regardless of the cause. All items must be packaged individually in compliance with Canadian Forces Packaging Specification D-LM-008-036/SF-000, with manufacturer names and part numbers clearly stamped or etched on each unit, and accompanied by a packing slip referencing the contract number, CRN, and PBN. Shipments exceeding 0.566 cubic meters or 15.88 kilograms must be palletized on standard 1.22 m x 1.02 m four-way forklift entry wood pallets conforming to ISPM 15 standards, at no cost to the Government. The evaluation basis is lowest evaluated price on an item-by-item basis, contingent upon strict compliance with mandatory technical criteria including correct part number and CAGE code; non-compliant offers will be disqualified. The contract is subject to inspection and acceptance by Canada, and the contractor is responsible for ensuring all goods are new, conform to the latest specifications, and meet quality standards recommended to be based on ISO 9001:2015. Delivery is required under DDP Incoterms 2020, and payment terms stipulate that undisputed invoices will be processed within 30 days after submission in approved form, following strict invoicing requirements that include financial codes, tax registration numbers, delivery details, and separate line items for taxes. The contractor must maintain

Construction and Mining (except Oil Well) Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Resistance Element

Solicitation # W8482-275249/A

The Department of National Defence is seeking offers for 100 resistance elements, part number U3577201, manufactured by UNISOURCE TECHNOLOGY INC, with a GSIN of 5905 and NCAGE of 38655, to be delivered in equal quantities of 50 units each to CFB Halifax, Nova Scotia and CFB Esquimalt, British Columbia. All bids must be submitted on a Delivery Duty Paid basis, meaning the supplier is responsible for all costs and risks until the items reach the designated locations. Offerors are required to submit their proposals in accordance with the solicitation W8482-275249/A, including mandatory documentation in original formats: the Annex Offeror Submission Details in both Excel and PDF, the Annex Offeror Submission Form in PDF, and the Annex Offeror Declaration Form in PDF. Any proposal for an equivalent or substitute product must clearly identify the brand name, model, part number, and NCAGE of the alternative item. The solicitation window closes on August 17, 2026, and all submissions must be in either English or French. The Crown reserves the right to negotiate with any supplier as part of the procurement process, and the official Statement of Requirements is available as an annex to the solicitation. The contracting authority is Funto Oyebolu, reachable via email at funto.oyebolu@forces.gc.ca.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

DEADLINE

Water Sampling and Laboratory Testing Services

Solicitation # W6840-SPO-27-001-A

The Department of National Defence is seeking qualified contractors to provide comprehensive potable water sampling and laboratory testing services at Hylands Golf Course in Ottawa, Ontario, under solicitation W6840-SPO-27-001-A. The contract requires weekly sampling at designated locations, with sample frequency varying between 7 sites from November to March and 10 sites from April to October, all performed by an ISO/IEC 17025 accredited laboratory. Core analytical parameters include E. coli, total coliforms, and turbidity, with additional testing for residual chlorine or other parameters as directed by the Technical Authority. The Contractor must conduct an initial vulnerability assessment of the water system and surrounding risk environment to identify potential contamination sources and evaluate susceptibility, followed by a baseline chemical analysis to determine if further site-specific monitoring is necessary. A detailed site-specific monitoring plan must be developed and submitted, outlining recommended contaminants and frequencies. All deliverables—including certificates of analysis, field sampling summaries, chain-of-custody documentation, vulnerability assessment report, and baseline analysis report—must be provided in English only. Any adverse result that may impact health, safety, or compliance must be reported by telephone immediately and confirmed in writing within 24 hours, including sampling location, parameter exceeded, measured value, applicable standard, preliminary interpretation, and recommended actions. Optional analytical services for metals, pesticides, fuel-related VOCs, nutrients, PFAS, and other approved analytes may be activated only with written authorization from Canada. The Contractor is responsible for supplying all sampling equipment, preservatives, coolers, ice packs, labels, and chain-of-custody forms, and must ensure sample integrity through proper handling, storage, and transport in accordance with holding times and temperature requirements; any sample rendered invalid due to Contractor error must be re-collected and re-analyzed at no additional cost to Canada. The initial contract term runs from October 10, 2026, to October 9, 2028, with three option years available for extension, contingent on 30 days’ written notice. Payment is on a firm all-inclusive unit price basis in Canadian dollars, covering all costs including labor, travel, equipment, administration, and overhead, with applicable taxes shown separately on invoices. Invoices must be submitted monthly with full details including contract number, item description, quantity, unit price, and financial codes, and will be paid within 30 days of receipt if dispute-free. The Contractor must maintain complete financial and operational

Testing Laboratories and Services

POSTED

DEADLINE

Uncrewed Aircraft System - Light

Solicitation # W8703-270009/A

The Department of National Defence is seeking a General Purpose Uncrewed Aircraft System designed to support light land forces in a broad spectrum of operational missions, including Intelligence, Surveillance, and Reconnaissance, force protection, targeting, strike capabilities, situational awareness, decision support, training, and experimental concept development. The system must be capable of full spectrum deployed operations and is required to be delivered to 7 CFSD Edmonton no later than March 1, 2027. Bids must be submitted electronically via email to Tanya.mckenzie@forces.gc.ca by August 25, 2026, and may be submitted in either of Canada’s official languages. The procurement follows the Phased Bid Compliance Process and is subject to the Policy on Prioritizing Canadian Suppliers & Canadian Content in Strategic Federal Procurements, emphasizing support for domestic industry. Debriefings are available to bidders upon request within fifteen working days of receiving bid results and may be conducted in writing, by phone, or in person. The Crown reserves the right to negotiate with suppliers, and all submissions are governed by the terms outlined in the Request for Proposal and associated documentation.

Aircraft Manufacturing

POSTED

DEADLINE

TSPS – One (1) Procurement Specialist, Intermediate (Enfield Region - Nova Scotia).

Solicitation # W6381-27-0008

The Department of National Defence is seeking a qualified intermediate-level Procurement Specialist through the Task and Solutions Professional Services (TSPS) supply arrangement E60ZT-18TSPS, Tier 1, to support Repair and Overhaul contracts under the Director of Quality Assurance, the National Quality Assurance Authority. The position requires one individual with demonstrated expertise in supply chain activities, inventory control, and material management, to operate within the DQA Quality Management System and deliver 240 days of effort per year at the Enfield Region in Halifax, Nova Scotia. The incumbent must hold a Secret-level security clearance, which the successful contractor and assigned personnel must obtain prior to contract performance, in compliance with the PWGSC Contract Security Program. The contract runs for a three-year period from August 31, 2023, to August 31, 2026, with an estimated total value of $477,600. All work must align with Canada’s international trade agreements including CFTA, CPTPP, CETA, and the WTO Agreement on Government Procurement, and must adhere to the Security Requirements Check List in Annex C. Only suppliers currently authorized under the TSPS arrangement are eligible to respond, and proposals must be submitted to the Contracting Authority, Kingsley Knight Ohene-Djan, by the deadline of August 7, 2026. The Crown reserves the right to negotiate with any supplier and may choose not to award a contract despite receiving proposals. No option periods or renewal terms are specified, and while the basis of award is not explicitly stated, the nature of the procurement suggests a trade-off evaluation approach typical for professional services under the TSPS framework. There is no formal breakdown of pricing by line item, nor are packaging, inspection criteria, or invoicing procedures detailed in the documentation.

Office Administrative Services

POSTED

DEADLINE

TBIPS - Informatics Support for Strategic Analysis Toolset

Solicitation # W6369-26-X036

The Department of National Defence is seeking a team of up to six informatics professionals to provide technical support for the ongoing evolution of the Strategic Analysis Support Toolset, aimed at enhancing the Canadian Armed Forces’ force development capabilities. The team will include one Technology Architect level 3, one Application/Software Architect level 2, and four Programmer Analysts level 2, all tasked with integrating disparate departmental data and metadata into a unified Business Intelligence environment. Their work will focus on transforming raw data into actionable insights through custom data collection methods, analytical models, and tailored visualizations that directly support strategic decision-making and process development within force development. The project emphasizes dynamic data interaction, system integration, and the delivery of scalable intelligence tools that align with evolving operational requirements. The solicitation, titled TBIPS - Informatics Support for Strategic Analysis Toolset with reference number W6369-26-X036, was posted on July 10, 2026, with a response deadline of August 12, 2026. The work is under the Government of Canada’s federal procurement framework and will be performed across Canada. Tatyana Vasilchuk serves as the primary contracting authority and can be reached via email for inquiries. The procurement is open to qualified vendors capable of delivering specialized informatics expertise in a secure, government environment with a focus on agility, data interoperability, and mission-critical analytics to support national defense objectives.

Computer Systems Design Services

POSTED

DEADLINE

Truck, Deisel, 4x4 Service Body and Crane

Solicitation # W8476-277177/A

The Department of National Defence is seeking to procure one diesel 4x4 truck equipped with a service body and crane for delivery to Canadian Forces Base Suffield in Alberta, with a requested delivery date 300 days after contract award. An option exists for a second unit to be delivered at another location within Canada. The solicitation, identified as W8476-277177/A, was posted on July 27, 2026, with offers due by August 6, 2026, and submissions must be sent exclusively via email to the designated government address. The requirement falls under NAICS code 336120 and is classified as a federal procurement with no set-aside provisions. All documentation may be submitted in either English or French. The contract includes mandatory compliance with Canadian regulations pertaining to packaging, marking, and dangerous goods, requiring adherence to ISPM 15 for wood materials, the Transportation of Dangerous Goods Act, the Hazardous Products Act, SAE standards for labeling and signage, and Incoterms 2020 DDP delivery terms. The contractor is responsible for unloading at the destination without federal assistance and must ensure all items are clearly marked with manufacturer details and bilingual warning labels. Technical specifications demand a fully functional service body with LED lighting, anti-skid surfaces, and compliance with the Motor Vehicle Safety Act and ISO 9001:2015 quality standards. The government retains sole authority for inspection and acceptance at the delivery point, and the contractor must provide test data, quality records, and access to facilities for verification. Pricing details for the base unit and optional items—including training, spare parts, tools, and technical documentation—are not finalized and will be determined during contract award. No security clearance is required, and there are no key personnel or organizational conflict of interest provisions specified. Offerors must submit proposals in four clearly delineated sections via email under 5 MB in size, and must attest to compliance with international sanctions, anti-forced labor requirements, and ethical conduct, with false certifications potentially leading to disqualification or contract termination. The contract contains no formal clauses referenced from the U.S. Federal Acquisition Regulation and instead follows Canadian government contracting norms, with no provision for U.S. entity identifiers such as UEI or CAGE codes, and no socioeconomic set-asides.

Heavy Duty Truck Manufacturing

POSTED

DEADLINE

Two (2) Senior Life Cycle Management Specialist

Solicitation # W8486-270813/A

The Department of National Defence is seeking to engage two Senior Life Cycle Management Specialists under Stream 5 of the Task and Solutions Professional Service Supply Arrangement, with a tender notice issued under file number W8486-270813/A. This procurement is restricted to pre-qualified suppliers listed under the TSPS Supply Arrangement E60ZT-18TSPS, and bids must be submitted by August 17, 2026. The contract is structured for an initial three-year term with an optional one-year extension, all under identical terms. Work is to be performed primarily at 101 Colonel By Drive in Ottawa, Ontario, within the National Capital Region, and all services must comply with Treasury Board policies regarding former public servants and security protocols, including a mandatory Secret security clearance for personnel. Bid documents will be distributed directly by the Contracting Authority to eligible suppliers and are not accessible through the CanadaBuys portal. Only suppliers that have successfully completed the pre-qualification process through PWGSC’s TSPS program are eligible to respond. Security requirements for this engagement include Secret-level clearance for individuals assigned to the project, though no document safeguarding level is specified. Bidders are required to provide detailed compliance information per Article 2.3 of Part 2 of the solicitation to meet federal staffing and ethical standards. The procurement is open to a defined list of pre-qualified firms, including major consulting and engineering firms such as Deloitte, CAE, Calian, ADGA, and others, all of whom have undergone prior vetting through the TSPS process. Inquiries must be directed exclusively to Kelsey Lawrence at the Department of National Defence, and the Crown reserves the right to negotiate with any or all bidders. The solicitation is issued under the NAICS code 541618 for other scientific and technical consulting services, and submissions may be in either English or French. The intent is to support lifecycle management functions critical to defence asset maintenance and sustainment through qualified professional resources.

Other Management Consulting Services

POSTED

DEADLINE

Spare parts for construction engineering equipment

Solicitation # W8486-270941/A

The Department of National Defence is seeking bids for spare parts required for construction engineering equipment under solicitation number W8486-270941/A, with a deadline for submissions set for September 15, 2026. The items, totaling 36 distinct parts including fluid filter adapters, windshield wiper blades, electrical cable assemblies, brake calipers, hydraulic fittings, fuel injectors, hydraulic motors, switches, seals, and various connectors and shafts, must be delivered by December 31, 2026, to either the 25CFSD facility in Montreal, Quebec, or the 7CFSD facility in Edmonton, Alberta, with quantities distributed between the two locations. All bids must be submitted in Canadian dollars, inclusive of delivery and Canadian customs duties and excise taxes, but excluding applicable taxes, and must be sent electronically via email to the designated receiving address. Each part is identified by its GSIN, NSN, specific part number, and NSCM/CAGE code, with some items having identical part numbers but allocated to different delivery sites. Contractors proposing equivalent or substitute products must clearly specify the brand, model, or part number and corresponding NSCM/CAGE code. The Crown reserves the right to negotiate terms with suppliers, and bidders may request a debriefing within fifteen working days of receiving bid results. All documentation may be submitted in either English or French.

Transportation Equipment and Supplies (except Motor Vehicle) Merchant Wholesalers

POSTED

DEADLINE

in about 1 month

Motor, Alternating Current

Solicitation # W8482-275360/A

The Department of National Defence is seeking proposals for two line items of alternating current motors, part number A/365TD/47 Mawdsley, manufactured by COMPAIR CANADA INC with NCAGE code 36008 and GSIN 6105, for delivery to CFB Halifax and CFB Esquimalt in quantities of six and four units respectively. The solicitation, numbered W8482-275360/A, was posted on July 31, 2026, with responses due by August 13, 2026, and is governed by a Firm Fixed Price contract structure under a Lowest Price Technically Acceptable evaluation methodology, where technical compliance is a mandatory pass/fail requirement and award is determined solely by the lowest evaluated price among compliant offers. Bidders must offer the exact part number or provide a fully documented equivalent or substitute product with corresponding brand, model, and NCAGE information, and all submissions must be submitted through CPC Connect or via fax, with proposals including mandatory annexes such as the Offeror Declaration Form, Submission Details, and Submission Form. Delivery is required under DDP terms, meaning the contractor assumes all transportation, duties, and risks until the items are received at the designated locations, with inspections and acceptance performed by the Government at the destination sites. Packaging and marking must comply with Canadian Forces specification D-LM-008-001/SF-001 for Canadian contractors, or MIL-STD-2073 and MIL-STD-129 for U.S. contractors, while EU-based contractors must meet NATO TL8100-0100 standards, and all items must bear barcodes using UCC/EAN-128 symbology with appropriate application identifiers and human-readable text. Items must be new, fully compliant with technical requirements, and carry at least 75% of their authorized shelf life, with quality assurance requirements aligned to ISO 9001:2015 and supporting documentation provided with each shipment. Invoices must be submitted to the Maritime Forces Atlantic Accounts Payable office in Halifax in a machine-readable format, accompanied by applicable financial codes and certifications, and contractors must maintain complete records for seven years post-payment. The contract includes strict obligations related to conflict of interest, employment equity, international sanctions compliance, and the safeguarding of classified or protected material if applicable, with the contractor liable for subcontractor compliance and subject to government inspection

Motor and Generator Manufacturing

POSTED

DEADLINE

TBIPS - Geomatics Analyst for Mapping & Charting Establishment

Solicitation # W1786-26-X002

The Department of National Defence is seeking to award a single contract for the services of one Geomatics Analyst Level 2 under the Task-Based Informatics Professional Services (TBIPS) Supply Arrangement, exclusively to qualified Tier 1 holders operating in the National Capital Region. The role involves providing geomatics engineering, IT infrastructure support, and development of data applications and workflows to enable production and operational capabilities for the Mapping and Charting Establishment and broader Department of National Defence and Canadian Armed Forces. The contract is expected to commence on 31 August 2028 and span an estimated 480 days of effort. Only nineteen pre-qualified TBIPS holders have been invited to submit proposals, including major firms such as CGI, Deloitte, ESRI Canada, Stantec, and others. The position requires access to Controlled Goods and a Minimum Resource Security Clearance of Secret, with the contractor organization needing to undergo Designated Organization Screening. Although bidders are not required to hold security clearances at the time of submission, the selected individual must be eligible and obtain the required clearance prior to performance. The contract falls under multiple international trade agreements, ensuring open competition among eligible Canadian suppliers. Proposals must be submitted by 19:00 EDT on 17 August 2026, with all inquiries directed to the Contracting Authority, Valery Plourde. All documentation may be submitted in either official language, and bidders may request a debriefing within 15 working days of receiving award notification.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

TBIPS - I.11 Technology Architect – Level 3

Solicitation # W6369-26DE44

The Department of National Defence, through the Director Project Delivery Command and Control Infrastructure Portfolio, is seeking two senior Level III I.11 Technology Architects to provide expert technical guidance for the design and implementation of Electronic Protection/Detection systems within the National Capital Region, Ottawa. This requirement is governed under the Task-Based Informatics Professional Services (TBIPS) Supply Arrangement EN578-170432, Tier 1, and is restricted to pre-qualified holders of this arrangement. The contract has an estimated effort of 760 person-days with a performance period extending from the date of award through March 31, 2028. All personnel assigned to the contract must hold and maintain a Secret security clearance under the Custom SRCL W6369-26DE44, although bidders are not required to possess the clearance at the time of proposal submission. Compliance with the Contract Security Program of Public Services and Procurement Canada is mandatory for organizational and personnel screening. The work involves delivering secure, mission-critical architectural solutions to ensure interoperability and operational effectiveness of DND’s command and control infrastructure, with no incumbent currently occupying this role. Proposals must be submitted electronically to the Contracting Authority, Jodi Bell, via email by August 7, 2026, and may be submitted in either English or French. The solicitation does not include pricing details, evaluation factors, or specific inspection criteria beyond adherence to security and contractual compliance, and no formal contract type or payment mechanisms are specified in the available documentation.

Computer Systems Design Services

POSTED

DEADLINE