Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Direct-Fired Gas Makeup Air Unit (heater)

Active

EllsworthAFB-Cold_Spray_HeaterFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The 28th Contracting Office at Ellsworth Air Force Base plans to award a sole source contract to Pauli Systems for the supply and installation of a Direct-Fired Gas Makeup Air Unit heater intended for an existing cold spray unit. This contract is aimed at enhancing the current system by providing necessary heating equipment to support operational needs. The solicitation, identified under the number EllsworthAFB-Cold_Spray_Heater, was posted on December 22, 2015, and falls under the NAICS code 333414, which covers heating equipment manufacturing. The award is managed by the Department of Defense office located at Ellsworth AFB, South Dakota, with primary points of contact being Thomas D. Kuhfahl and Contract Administrator Laura A. Junge. The contract supports a critical upgrade at Ellsworth AFB, guaranteeing specialized equipment installation through a sole source acquisition, which is justified by a simplified acquisition and single source justification document. The scope includes both delivery and installation services at the specified location, ensuring the cold spray unit's operational efficiency is maintained or improved.

General Info

Ellsworth AFB awards sole source contract to Pauli Systems for Direct-Fired Gas Makeup Air Unit heater installation.

Agency

Department Of Defense → FA4690 28 Cons Pkc

NAICS

333414 - Heating Equipment (except Warm Air Furnaces) Manufacturing

Place of Performance

ELLSWORTH AFB, SD, 57701, USA

Set-Aside

NONE

Documents

1

16-015_Single-Source-Justification_SAP_Pauli_Heater_Redacted.pdf

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PostedDec 22

special-notice

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA4690 28 Cons Pkc

Contacts2 people available

OfficeELLSWORTH AFB, SD, 57706-4947, USA

Organization / AgencyDepartment Of Defense → FA4690 28 Cons Pkc

Office AddressELLSWORTH AFB, SD, 57706-4947, USA

Contacts

Thomas D. Kuhfahl

contact@example.gov

+1 (555) 000-0000

Laura A. JungeContract Administrator

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

The 28th Contracting Office intends to award a sole source contract to Pauli Systems, for supply and installation of a Direct-Fired Gas Makeup Air Unit (heater) to an existing cold spray unit. See the attached simplified acquisition single source justification for details.

Similar Contracts

Same NAICS industry code

16--PARTS KIT,AIR FLOW REG

Solicitation # SPE7M4-27-T-1459

Solicitation SPE7M4-27-T-1459 is a request for quotes for 17 air flow regulator parts kits (NSN 1660017186363) for the DLA Weapons Support Fluid Handling Division. The procurement is categorized under NAICS code 333414 and requires delivery to the DLA Distribution Depot Oklahoma by October 31, 2027, with a need ship date of October 9, 2027. Quotes must be submitted electronically via DIBBS by October 30, 2026. The approved source is identified as 99251 1701009-1. The contract mandates strict adherence to military standards, including MIL-STD-129 for marking and MIL-STD-2073-1 Appendix D for kit packaging. Inspection and acceptance will occur at the origin, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Key regulatory requirements include the Buy American Act, the Berry Amendment, and CMMC Level 2 Self-Assessment. Payment and invoicing must be processed through the Wide Area WorkFlow (WAWF) system. Offerors are encouraged to provide quantity ranges and must disclose any non-domestic materials used in the parts kits.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

44--HEATING ELEMENT,ELECTR

Solicitation # SPE8E8-27-T-0258

DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

Lighting Fixture Supplier (NSN 6210016127992)This subcontract involves the supply of lighting fixtures for prime contractors supporting the Defense Logistics Agency Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing fixtures that strictly adhere to technical specifications for NSN 6210016127992 and the DLA Master List of Technical and Quality Requirements. All items must be packaged according to ASTM D3951 and marked or labeled in compliance with MIL-STD-129 before being delivered to designated DLA locations. The project falls under NAICS code 333414 and is associated with a place of performance in Tracy, California. Interested parties must note the response deadline of October 26, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

FIXTURE, LIGHTING

Solicitation # SPE4A6-27-T-5065

Solicitation SPE4A6-27-T-5065 is a fixed-price request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of two lighting fixtures, identified by NSN 6210016127992 and AAR Manufacturing part number 86631084. The items are designated as critical application items and must be delivered within 64 days after order to DLA Distribution San Joaquin in Tracy, California. Delivery is established as FOB Origin, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to quality and packaging standards, requiring compliance with ASTM D3951 and RP001 for packaging, and MIL-STD-129 for marking and labeling. Quality assurance will be conducted using zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Contractors must utilize the Wide Area WorkFlow system for electronic invoicing and payment requests. Key regulatory requirements include compliance with the Buy American Act, DFARS 252.204-7012 for safeguarding covered defense information, and specific hazardous material labeling standards under 29 CFR 1910.1200.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

GARBAGE DISPOSAL MACHI

Solicitation # SPE8E8-27-T-0255

Solicitation SPE8E8-27-T-0255 is a total small business set-aside for the procurement of eight commercial garbage disposal machines, identified by NSN 4540-01-596-6862. The requirement is managed by DLA Troop Support, Construction and Equipment, with delivery scheduled for DLA Distribution San Joaquin in Tracy, California. The original required delivery date is March 7, 2027, with a need ship date of March 28, 2027, and a delivery window of 149 days. Terms are FOB Origin, and inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA packaging requirements (RP001) and MIL-STD-2073-1E for preservation, while marking must comply with MIL-STD-129. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements (RA001). Administrative requirements include the use of the Wide Area Workflow (WAWF) system for electronic invoicing and receiving reports. Key regulatory compliance includes the Buy American and Balance of Payments Program (DFARS 252.225-7001), safeguarding of covered defense information (DFARS 252.204-7012), and hazardous material labeling per 29 CFR 1910.1200.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Solicitation # SPE8E7-27-T-0216

Solicitation SPE8E7-27-T-0216 is a fixed-price contract issued by the Defense Logistics Agency for the procurement of one Orion Fan, identified by NSN 4140016024813. The item is destined for the USS North Dakota (SSN 784) with a required delivery date of October 15, 2026, and a delivery window of 20 days after order. Inspection and acceptance will occur at the destination. The procurement is categorized under NAICS code 333414 and may be eligible for automated award, with all quotes required to be submitted via the DLA Internet Bid Board System. The contract mandates strict adherence to technical and quality requirements, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Specific restrictions are placed on the use of mercury and the removal of government identification from non-accepted supplies. Compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information is required. Invoicing must be processed electronically through the Wide Area Workflow system. The government emphasizes that only the exact products specified by the cited entities are acceptable, and unauthorized substitutions may result in civil or criminal penalties.

Defense Logistics Agency

POSTED

DEADLINE

PIPE, AIR CONDITIONING-

Solicitation # SPE8E8-27-T-0252

Solicitation SPE8E8-27-T-0252 is a request for quotations for the procurement of 951 units of air conditioning and heating pipe, identified by NSN 4520002778339. The required material is round, blue annealed steel with a nominal length of 24 inches, conforming to basic CID A-A-55536A. The contract is issued by the DLA Troop Support Construction and Equipment office for delivery to the DDSP New Cumberland Facility in Pennsylvania. Delivery is required within 102 days after order, with an original required delivery date of October 16, 2026. Terms are FOB Origin, and both inspection and acceptance will occur at the destination. The procurement is subject to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All packaging must be marked and labeled per MIL-STD-129, and palletization must follow RP001 requirements. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow system. The solicitation is open to full and open competition and includes various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, the Berry Amendment, and safeguarding covered defense information. HUBZone small businesses may be eligible for a price evaluation preference.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

HEATER, WATER, ELECTRIC

Solicitation # SPE8E8-27-T-0253

Solicitation SPE8E8-27-T-0253 is a total small business set-aside issued by the Defense Logistics Agency for the procurement of one electric water heater, identified by NSN 4520016888088. The requirement is for a single unit with a delivery timeframe of 20 days after order, and an original required delivery date of October 15, 2026. The item is to be delivered FOB Destination to the USS TRIPOLI LHA 7 at FPO AP 96694-2900. Inspection and acceptance will also take place at the destination. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Technical and quality requirements are governed by the DLA Master List, and any hazardous materials must be labeled according to the Hazard Communication Standard. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with various FAR and DFARS clauses, including those regarding the Berry Amendment, Buy American Act, and safeguarding covered defense information. Quotes are to be submitted through the DIBBS portal.

Defense Logistics Agency

POSTED

DEADLINE

41--IMPELLER,FAN,AXIAL

Solicitation # SPE8E7-27-Q-0002

Solicitation SPE8E7-27-Q-0002 is a firm fixed price request for quotation issued by the Defense Logistics Agency (DLA) Troop Support Construction and Equipment for the procurement of 20 axial fan impellers, NSN 4140-01-578-3878. The procurement is open to all responsible sources and is not a small business set-aside. Approved sources include 75477 B5W-37614-2 and 75477 R1-3562 IT.NO.1. Quotes must be submitted electronically via the DLA Internet Bid Board System (DIBBS) by October 23, 2026. The selected contractor must deliver the items to DLA Distribution San Joaquin in Tracy, California, within 131 days after receipt of order, with a customer required delivery date of April 22, 2027. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 requirements. Inspection and acceptance will occur at the destination. Invoicing and payment requests must be processed electronically through the Wide Area WorkFlow (WAWF) system. This procurement incorporates several critical regulatory requirements, including the Buy American and Balance of Payments Program, DFARS cybersecurity reporting for safeguarding covered defense information, and various FAR clauses regarding material requirements and labor standards. Evaluation will be conducted in accordance with DFARS Part 225, and the government will consider the use of used, reconditioned, or remanufactured supplies under evaluation factor M05.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

RFI W8476-256911 Advanced Water Supply System (AWSS)

Solicitation # WS5536410793

Public Services and Procurement Canada is issuing a Request for Information to identify industry partners with the capacity and expertise to support the Department of National Defence’s Advanced Water Supply System project. The primary objective of this initiative is to equip the Canadian Armed Forces with the necessary capabilities to produce potable water for deployed land operations and training exercises, scaling from unit sizes of 500 personnel up to formation levels of 5,000 personnel. This solicitation, identified by number WS5536410793, is open for responses until March 31, 2027. Managed by the Department of Public Works and Government Services, the project falls under NAICS code 333414 and focuses on performance within Canada. Interested parties are encouraged to engage in this consultation process to demonstrate their ability to meet the technical and delivery requirements of the water supply system.

Department of Public Works and Government Services

POSTED

DEADLINE

PIPE, AIR CONDITIONING-

Solicitation # SPE8E8-27-T-0246

Solicitation SPE8E8-27-T-0246 is a request for the procurement of seven units of air conditioning-heating pipe (NSN 4520-01-213-1247) for the Department of Defense, specifically the DDSP New Cumberland Facility. The delivery is required within 167 days after order, with a need ship date of April 12, 2027, and an original required delivery date of September 17, 2027. The contract is FOB Origin and requires the contractor to maintain supply chain traceability documentation per DLA Directive Procurement Notes C03. Due to the nature of the item, the government notes that casting, forging, and special tooling may be necessary for manufacture. Compliance requirements are stringent, including CMMC Level 2 certification and adherence to ISO 9001:2015 quality standards. The item is subject to export controls under ITAR or EAR, requiring offerors to have an approved JCP certification to access technical data. Quality assurance involves origin and source inspection for critical items, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with specific requirements to seal all openings with caps or plugs. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Vending Machine Equipment SupplierThis subcontract agreement establishes a partnership for the supply and installation of automated beverage and snack vending machines at Umpqua Community College. The selected supplier is responsible for providing specific machine makes and models equipped with telemetry, energy-efficient components, and diverse payment options. The scope of work includes the installation of equipment in designated areas, coordination of the removal of existing machines, and ensuring all installations are fully operational and ADA compliant. Managed by the Oregon Purchasing agency under NAICS code 333414, the solicitation was posted on October 15, 2026, with a response deadline of November 10, 2026. The contract is structured as a subcontract for prime contractors overseeing campus projects, focusing on the delivery of modern, accessible vending solutions to the college environment.

POSTED

DEADLINE

More opportunities from Department Of Defense → FA4690 28 Cons Pkc

Same awarding agency

Hazardous Waste Testing and Laboratory AnalysisThis subcontract for Hazardous Waste Testing and Laboratory Analysis supports prime contractors on Air Force base projects located at Ellsworth AFB. The scope of work involves performing critical sampling and laboratory analysis on dewatered waste, specifically conducting Paint Filter Tests, Total Petroleum Hydrocarbons analysis, and Toxicity Characteristic Leaching Procedure for Benzene and Metals. All test results must be delivered to 28 CES / CEIEC. To ensure technical compliance, the contractor must utilize certified commercial laboratory equipment and sampling tools and maintain valid commercial laboratory certification. This requirement falls under NAICS code 541380 and is managed by the Department of Defense under the 28 Cons Pkc agency.

Testing Laboratories and Services

POSTED

DEADLINE

Waste Dewatering and Landfill Disposal ServicesThis subcontract for Waste Dewatering and Landfill Disposal Services supports prime contractors on Air Force base projects located at Ellsworth AFB. The scope of work involves dewatering waste at Building 3017 using government-provided Ultra-Dewatering Bags and transporting the resulting solids to the Rapid City Regional Landfill using solid waste transport vehicles. Additionally, the contractor is responsible for depositing hazardous materials into designated government containers for Base Hazmat and providing verified landfill tickets as proof of disposal. Managed under the Department of Defense, specifically the 28 Cons Pkc agency, the project falls under NAICS code 562111. The contract is scheduled for posting on October 2, 2026, with a response deadline of October 15, 2027. All performance activities will take place within the 57706 zip code at Ellsworth AFB.

Solid Waste Collection

POSTED

DEADLINE

Industrial Oil/Water Separator Cleaning (Bldg 3015)This subcontract involves providing specialized cleaning and maintenance services for the industrial oil/water separator located at Building 3015 on Ellsworth Air Force Base. The selected contractor will be responsible for pumping and cleaning the unit using industrial-grade equipment to remove grease and waste build-up, ensuring all work adheres to the specifications outlined in Appendix B. Managed under the Department of Defense and the FA4690 28 Cons Pkc agency, the project falls under NAICS code 562920. The performance of these services will take place in Ellsworth AFB, zip code 57706, with a response deadline set for October 15, 2027.

Materials Recovery Facilities

POSTED

DEADLINE

Grease and Sand Trap Maintenance ServicesThis subcontract for Grease and Sand Trap Maintenance Services involves providing specialized cleaning and pumping services for prime contractors on projects at Ellsworth Air Force Base. The scope of work includes maintaining facilities such as Bandit Lanes and the Main Gate Inspection Area by utilizing vacuum trucks and high-pressure cleaning tools to remove residues from walls and clear inlet and outlet pipes to a depth of 12 inches. Additionally, the contractor is responsible for ensuring correct recharge water levels and providing the Contracting Officer's Representative with a final report of any identified defects. Managed under the Department of Defense and categorized under NAICS code 562920, the contract is centered in Ellsworth AFB, zip code 57706. The solicitation was posted on October 2, 2026, with a response deadline set for October 15, 2027.

Materials Recovery Facilities

POSTED

DEADLINE

SOURCES SOUGHT: Grease, Sand Trap, Oil and Water Separator

Solicitation # A070167

Ellsworth Air Force Base in South Dakota is conducting a sources sought announcement to identify qualified vendors for the cleaning, maintenance, and pumping of grease traps, sand traps, and oil water separators. The government intends to establish a five year ordering period blanket purchase agreement, though the final acquisition strategy may change based on market research. This is not a solicitation, and no awards will be made from this notice; interested firms must submit a capabilities package by October 15, 2025, detailing their experience, business size, and intent to bid. The scope of work requires the contractor to provide all labor, equipment, and transportation to remove and dispose of liquids, oil, grease, and solid waste across various base locations, including Building 3015 and the base dewatering facility. Key requirements include using government provided Ultra-Dewatering Bags, adhering to EPA SW-846 and RCRA standards for waste sampling, and disposing of non-hazardous waste at the Rapid City Regional Landfill. Contractors must comply with OSHA standards for confined space entry and hazardous substance handling. Performance involves varying service frequencies from monthly to annually, with a mandatory six hour response time for emergency calls. Payment will be processed via Government Purchase Card or Wide Area Work Flow upon submission of monthly invoices and landfill weight tickets.

All Other Miscellaneous Waste Management Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS