Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on October 20, 2020. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Disintegrator Preventive Maintenance

Awarded
N0025321Q0007Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management & Training Corporation (MTC) is soliciting bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist, no cab or loader, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The contractor is responsible for providing all transportation, labor, supervision, tools, and new manufacturer-specified parts to diagnose and repair the clutch assembly and power take-off (PTO) system. The scope of work includes disassembling tractor components, replacing friction discs, bearings, oil seals, O-rings, and the clutch release spring, resurfacing the flywheel, and replacing necessary hydraulic pipes and filters. Final acceptance is contingent upon the Facility Maintenance Department verifying proper clutch engagement and disengagement and confirming the PTO system operates correctly under load. This is a small business set-aside solicitation under NAICS code 811310, with a response deadline of November 3, 2026. Bids will be evaluated based on best value, requiring a lump sum fee, itemized costs, warranty information, and proof of necessary qualifications. Submission requirements include a bid sheet, a completed supplier packet with IRS Form W-9, proof of insurance, and applicable SBA certification letters. The contract incorporates various Federal Acquisition Regulation (FAR) clauses regarding small business utilization, equal opportunity, and labor standards, specifically adhering to Wage Determination No. 2015-4687 Revision 31 for Kentucky. Contractors must also comply with strict security protocols regarding non-public information and federal debarment disclosure requirements.
Earle C. Clements Job Corps Center

POSTED

about 2 hours ago

DEADLINE

in 4 days
NAICS: 811310
New
SLED
Chiller Maintenance Services
Solicitation # 26FS0006
Solicitation 26FS0006 is an Invitation for Bid issued by the California Department of Veterans Affairs (CalVet) for comprehensive maintenance and emergency repair services for chillers, Liebert units, and cooling towers at the Veterans Home of California-Fresno. The contract period is scheduled from January 1, 2027, through June 30, 2030. The scope of work includes annual and quarterly preventive maintenance, one-time evaporator tube cleaning and eddy current testing, and emergency repair services with a required two-hour response time. Key deliverables include annual leak detection reports per AQMD requirements and yearly oil sample lab analysis reports. The contract will be awarded to the lowest responsible bidder who complies with all requirements. Evaluation factors include price, responsibility, and responsiveness, with specific incentives and preferences applied for Disabled Veteran Business Enterprises (DVBE) and certified Small or Micro businesses. To be eligible, contractors must maintain an active C-20 license and technicians must hold EPA Section 608 Universal Technician Certification. Bidders are required to submit a mandatory Rate Sheet, signed Contractor Certification Clauses, and a Bidder Certification via email to Eric Dahmen by the November 4, 2026, deadline. Awarded contractors must adhere to prevailing wage laws under Labor Code Section 1770 and comply with all site security and health requirements at the Fresno facility.
California Department of Veterans Affairs

POSTED

about 4 hours ago

DEADLINE

in 4 days
NAICS: 811310
New
Federal
Crane Hoist and Conductor Bar Upgrade
Solicitation # N6833527Q1037
Solicitation N68335-27-Q-1037 is a combined synopsis and request for quote for a firm-fixed-price contract to upgrade the hoist and conductor bar on bridge crane 148-12 for the Prototype, Manufacturing, and Test Division at the Naval Air Warfare Center Aircraft Division in Lakehurst, New Jersey. The project requires replacing an obsolete 3-ton Detroit hoist and 3-wire conductor bar with a new 3-ton wire hoist and 4-wire conductor bar, including a new VFD control panel compliant with NAVCRANECENIST 11450.2A. The contractor must adhere to various standards, including NAVFAC P-307, NAVSEA Publication 0989-030-7000, and NFPA 70. This is a total small business set-aside under NAICS code 811310. Attendance at the site visit on November 12, 2026, is mandatory for all interested bidders, with security information due by November 10, 2026. Quotes are due by 12:00 PM EDT on November 30, 2026, and must be submitted electronically to Danielle Russo. Evaluation will be based on the lowest price among technically acceptable offers, considering the technical description and a capabilities statement not exceeding three pages. Additionally, offerors must self-report a CMMC Level 1 Self Assessment. All shipments are FOB Destination, and final acceptance is contingent upon a successful 125 percent load test performed by government personnel.
Navair Warfare Ctr Aircraft Division

POSTED

about 6 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
Federal
Annual Inspection Maintenance of Manlifts
Solicitation # 70ZH1526QCGA00002
The U.S. Coast Guard Academy in New London, Connecticut, is soliciting a contract for the annual inspection, preventive maintenance, and corrective maintenance of Government-owned mobile elevating work platforms, specifically scissor and boom lifts. The scope of work requires the contractor to provide qualified competent personnel, tools, and consumables to perform services in accordance with U.S. Coast Guard Maintenance Procedure Cards, OSHA 29 CFR 1910.333 standards, ANSI/SAIA A92 standards, and original equipment manufacturer specifications. The contract structure consists of a base year from January 1, 2027, to December 31, 2027, with four subsequent option years extending through December 31, 2031. Annual preventive inspections are established as firm-fixed-price items, while corrective maintenance, troubleshooting, and repairs are ordered on a time-and-materials basis via Government-approved task orders. This acquisition is a 100% Small Business Set-Aside under NAICS code 811310, with a business size standard of 12.5 million dollars. Award will be determined using the Lowest Price Technically Acceptable (LPTA) approach, where technical acceptability is evaluated on a binary acceptable or unacceptable basis. Key deliverables include completed inspection forms, monthly status reports, and the submission of Technical and Equipment Authorization Requests for any identified discrepancies. The contractor is responsible for all quality control and must adhere to strict marking, labeling, and lockout/tag-out procedures. Invoicing must be processed electronically through the Invoice Processing Platform. Quotes are due by November 16, 2026, and must be submitted via email to the designated point of contact.
USCG Academy

POSTED

about 6 hours ago

DEADLINE

in 17 days

General Info

Contract Value

$21,558

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Milton, WA, 98354, USA

Set-Aside

SBA

Award Issued Date

Documents

1

N0025321Q0007+Disintegrator.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Naval Undersea Warfare Center
Contacts1 person available
OfficeKEYPORT, WA, 98345-7610, USA
Office AddressKEYPORT, WA, 98345-7610, USA

Full Description

Show more
Vendors need to submit pricing for 8 CLINs: CLIN 0001, 0002, 1001, 1002, 2001, 2002, 3001 and 3002. Page 1 fill-ins must be sign, vendor name, cage code, vendor POC name, tel no. and email address, sign and date on bottom boxes 30a 30b and 30c. Pricing and lead time must be indicated on pages 5 through 12 of SF-1449. **** The following clause mark-up needs completion in SF-1449 **** 52.204-17 - We do not have an immediate owner. Checked on para (b). 52.204-20 - Is not successor or Predecessor. Checked para (b). 52.204-24 - will not provide covered telecommunications equipment or services to the Government. Checked para (d). 52.209-11 - is not a corporation that has unpaid taxes. Checked para (1) & is not a corporation that was convicted of a felony. Checked para (2). 52.222-48 - Checked Does Certify para (a). 52.222-52 - Checked Does Certify para (a). 52.223-22 - Checked does not publicly disclose greenhouse house gas emissions, para (1) & (2). Example 52.204-24 Complete a clause requirement. Clause 52.204-24 (REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS) on page 10 of the SF-1449. There are statements 1 and 2 that must be marked X on appropriate places [ ] or simply put YES OR NO after the statement : Example as follows: (1) It [ ] will, [ X ] will not provide covered telecommunications equipment or services to the Government. (2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that-- It [ ] does, [ X ] does not use covered telecommunications equipment or services, or use any equipment, system, or ********* SYNOPSIS ********** Naval Undersea Warfare Center (NUWC) Division Keyport is soliciting for procurement of Semi Annual Disintegrator Preventive Maintenance Onsite Repair Service, with three (3) Option coverage years. The Period of Performance is one year from date of award. This requirement is being issued as a combined synopsis/solicitation for commercial items in accordance with FAR 12.6, as supplemented with additional information included in the attached solicitation. Requirement is soliciting under 100% small business set-aside. This announcement constitutes the only solicitation. The Defense Priorities and Allocations System (DPAS) applicable assigned rating for this requirement is DO-S1. The solicitation issued as a request for quotation (RFQ) is N0025321Q0007 and is attached to this announcement. Provisions and clauses in effect through the latest Federal Acquisition Circulars are included in the attached solicitation. Applicable NAICS code for this requirement is 811310 and has a size standard of $8.0 M. The Government prefers FOB Destination pricing to NUWC KEYPORT. Requirements and evaluation procedures are listed in the attached solicitation, which is required to be completely filled out and returned before the solicitation closes. All questions regarding this solicitation should be submitted in writing as soon as practicable after receipt of solicitation. Questions and Offers should be submitted via e-mail to: contact@example.gov. No paper copies will be accepted. Only digital copies sent via email will be accepted. Failure to complete all representations and certifications found within the solicitation, and respond to this RFQ with associated amendments if applicable prior to the closing date and time established may render an offer non-responsive and result in rejection. Company quote forms may be provided but not substituted for a completed solicitation / amendment pages. The government terms and conditions (T&C's) listed in this solicitation are required by law through the Federal Acquisition Regulations (FAR) and the Department of Defense FAR Supplement (DFAR). It is preferred that company T&C's not be included with your quote submittal as many company T&C's are inconsistent with federal law and unenforceable. To access the clauses/provisions to be completed, download the Federal Acquisition Regulations at http://www.arnet.gov/far/. Download the Defense Federal Acquisition Regulations (DFARS) at: http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html. Offerors are also advised that these representations and certifications can be completed electronically via the SAM website at http://www.sam.gov.

More opportunities from Department Of Defense → Naval Undersea Warfare Center

Same awarding agency

NAICS: 331492
New
Federal
Silver Reutilization and Account Maintenance Service
Solicitation # N0025327Q0001
The Naval Undersea Warfare Center Division, Keyport is soliciting quotes for Silver Reutilization and Account Maintenance Services to refine silver-bearing material recovered from batteries. The primary objective is to process materials from Silver/Zinc and Silver/Chloride batteries to achieve 99.9% purity, with the resulting refined silver used to manufacture new batteries. Annual requirements include 380,000 troy ounces of high silver content material and 725,000 troy ounces of low silver content material, alongside account maintenance for 500,000 troy ounces. The government intends to award one Indefinite-Delivery, Indefinite-Quantity contract with a five-year ordering period from January 20, 2027, to January 19, 2032. The contract will utilize a combination of Firm-Fixed-Price and Fixed-Price with Economic Price Adjustment (EPA) based on the London Bullion Market Association silver price index. Award will be based on Lowest Price Technically Acceptable (LPTA) procedures, evaluating technical approach and past performance for acceptability. Key deliverables include materials processed reports, account balance reports, and quarterly progress reports. The contractor must adhere to strict environmental laws for hazardous waste disposal and maintain all necessary permits for transporting and processing silver-bearing materials. Performance will be monitored via a Quality Assurance Surveillance Plan, with a required silver return rate between 75% and 90% of the received net weight.
Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 238290
New
Federal
WSTF Tank Pipe Insulation
Solicitation # N0025327Q0003
The Naval Undersea Warfare Center Division Keyport is soliciting quotes under RFQ N0025327Q0003 for the installation of thermal insulation and weather-protective lagging on an outdoor run of 2-inch nominal copper piping, spanning approximately 75 to 100 linear feet. The objective is to restore thermal efficiency and protect the piping and electrical heat trace from environmental exposure, requiring 100% coverage. All work must comply with the 2018 Washington State Energy Code and OSHA safety standards, with materials rated for temperatures between 30F and 140F. The project includes verifying the integrity of the heat trace system both before and after installation and utilizing removable thermal blankets for maintenance access at valves and pumps. This requirement is a 100% small business set-aside under NAICS code 238290, with a size standard of 22 million dollars in annual revenue. The contract is a firm fixed price award to be completed within 35 calendar days from the date of award, with delivery terms set as FOB Destination. Award will be based on the best value, evaluating technically acceptable offers based on price and past performance, with equal weight given to quality and delivery. Offerors must be registered in the System for Award Management and maintain a minimum of CMMC Level 1 certification. Submissions must be sent electronically to the designated points of contact, and all invoicing will be processed through Wide Area Workflow.
Other Building Equipment Contractors

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 336412
New
Federal
Refurbishment of Torque Motor Magnetic Field Ring Assemblies
Solicitation # N0025326R7006
Solicitation N0025326R7006, issued by the Naval Undersea Warfare Center Division Keyport, is for an Indefinite-Delivery Indefinite-Quantity (IDIQ) contract focused on the refurbishment and repopulation of torque motor magnetic field ring assemblies (DMISA RINGS). The scope of work involves the depopulation of existing magnets, refurbishment including potential grinding to meet final dimensions, and the installation of new replacement magnets for plated steel and stainless steel azimuth and elevation rings. The government has established a maximum order quantity of 2,540 units, with delivery timeframes generally set at 180 calendar days after the receipt of government furnished property. The contract will be awarded using the Lowest Price Technically Acceptable (LPTA) source selection process, evaluating offerors based on technical capability, risk management, and past performance. Key requirements include compliance with NAVSEA drawings 7447999 Rev I and 7448000 Rev F, as well as strict packaging standards requiring individual polyethylene wrapping and the use of government-supplied foam. Offerors must provide JCP and CMMC certifications to access secured drawings and submit a Test and Inspection Data Sheet with every delivery. Following two amendments, the final response closing date is November 2, 2026.
Aircraft Engine and Engine Parts Manufacturing

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 561210
Federal
NUWC Keyport Moving Services
Solicitation # N0025327Q0002
The Naval Undersea Warfare Center Division Keyport is soliciting firm fixed price moving services under solicitation N0025327Q0002 to relocate the workspaces of 180 personnel from Building 1 to Building 894. The scope of work includes the transport of approximately 950 packed boxes, six security safes, 12 cabinets or shelving units, and other office equipment. This effort must be completed as a single consolidated evolution within five consecutive weekdays during standard working hours. The contractor is responsible for providing all labor, technical supervision, and material handling equipment, though they are specifically excluded from moving hazardous materials or individual personal electronics. This requirement is a total small business set-aside, specifically targeting Women-Owned Small Businesses and Service-Disabled Veteran-Owned Small Businesses under NAICS code 561210. To be considered technically acceptable, offerors must provide FOB Destination pricing, possess at least CMMC Level 1 certification with a valid Unique Identifier, and meet all security and background check requirements for base access. Award will be based on a best-value trade-off analysis considering price and past performance, with equal weight given to quality and delivery. All quotes must be submitted digitally via email by November 5, 2026, and must include completed representations and certifications via the System for Award Management.
Facilities Support Services

POSTED

8 days ago

DEADLINE

in 6 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS