Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

DISPLAY ASSEMBLY

Active
SPE4A6-26-T-06ZDFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of two DISPLAY ASSEMBLY units with NSN/Part Number 6320-01-082-2460, under solicitation SPE4A6-26-T-06ZD, with a required delivery within 50 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date or award date depending on the acquisition type. The item is subject to export control under ITAR or EAR, restricting unauthorized disclosure of technical data to foreign persons, regardless of location, and mandates strict adherence to DFARS 252.225-7048. Contractors must hold approved US/Canada Joint Certification Program certification, complete mandatory DOD export control training, and receive DLA authorization to access controlled data. Configuration changes require formal Engineering Change Proposal procedures, and deviations or waivers must be formally requested. Government identification must be removed from non-accepted supplies per RQ011, and while Item Unique Identification is not required due to service customer request, DLA packaging standards under RP001 apply. The contract is managed by the ASC Commodities Division under the Department of Defense, with performance location in New Cumberland, PA, and primary point of contact Xavier Keyes.

General Info

Procure two DISPLAY ASSEMBLY units, NSN 6320-01-082-2460, deliver in 50 days, comply with ITAR/EAR, DFARS, and DLA standards.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

336611 - Ship Building and RepairingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-06ZD for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Xavier Keyes
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DISPLAY ASSEMBLY
DISPLAY ASSEMBLY
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RD002, COVERED DEFENSE INFORMATION APPLIES

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.

RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 6320-01-082-2460 Quantity: 2 EA Purchase Request: 7015956226QTY: 2 Delivery: 50 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336611
New
Federal
Goodrich Advanced Propulsor BearingsThe Naval Surface Warfare Center Carderock Division is proceeding with a sole-source purchase order to Goodrich Corporation for advanced propulsor bearing components, as Goodrich is the exclusive provider of the proprietary material required to meet technical and schedule demands. The acquisition falls under NAICS code 336611, targets a business with 1,300 employees, and will be conducted using Simplified Acquisition Procedures as a firm fixed-price contract, justified under FAR 6.302-1(a)(2)(ii) due to the lack of alternate sources capable of fulfilling the requirement within the necessary timeframe. While this action is not a competitive solicitation, interested parties may submit capabilities statements by July 22, 2026, at 12:00 PM to allow the Government to assess whether competition is feasible, though the decision to proceed without competition remains entirely at the Government’s discretion. All inquiries should be directed to Michael J. Bonaiuto at the provided email and phone number, and the solicitation number for this action is N0016726Q1135, posted on July 17, 2026, with a response deadline of July 22, 2026, at 4:00 PM. The contracting office is located in Bethesda, Maryland, under the Department of Defense.
Nswc Carderock

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 336611
New
Federal
Yaquina Overhaul FY27The U.S. Army Corps of Engineers, Portland District, is soliciting sealed bids for a firm fixed price job order under the Master Ship and Repair Agreement to perform overhaul, maintenance, and repair on the dredge YAQUINA, a 200-foot trailing arm suction hopper dredge built in 1980. All work must be completed at the contractor’s facility, with the government responsible for transporting the vessel to and from the contractor’s site. The contractor must have an active Master Ship and Repair Agreement with USACE Portland District prior to award; those without an existing agreement must initiate the process before submitting a bid. Participation requires attendance at a mandatory site visit, with one confirmed date on July 26, 2026, in Coos Bay, Oregon, and additional dates to be announced. Site visits begin at 9:00 AM Pacific Time, and all attendees must provide their own Personal Protective Equipment compliant with EM 385-1 standards. Access to some locations may require a Transportation Worker Identification Certification (TWIC) card, and contractors must notify the point of contact of their TWIC status. The overhaul includes critical activities such as dry docking, internal structural reviews, renewal of the U.S. Coast Guard Certificate of Inspection, and endorsement of the American Bureau of Shipping International Load Line Certificate. The dredge’s dimensions include a length overall of 200 feet, a beam of 58 feet, and a gross tonnage of 2,001 long tons, with specific draft measurements noted for operational reference. Bids must be submitted electronically via email to Jaren Bowman and Ian Lutjens no later than August 17, 2026, at 2:30 PM Pacific Time, using the solicitation number W9127N26BA029. The bid validity extends through November 1, 2026. The solicitation is issued under NAICS code 336611 with no set-aside, and all documents are provided in electronic format only through the SAM.gov portal. Dock and sea trials conducted by USACE personnel are mandatory prior to acceptance of the vessel upon completion of the overhaul.
W071 Endist Portland

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 336611
New
Federal
52000QR260026740- CGC Angela McShan Hull Inspect, Clean and Anode Zinc Renewal.
Sflc Procurement Branch 1(00080)

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 336611
New
Federal
USNS SALVOR (T-ARS 52) Mid-Term Availability (MTA)The USNS SALVOR (T-ARS 52) Mid-Term Availability (MTA) solicitation, numbered N6264926RL019, issued by NAVSUP Fleet Logistics Center Yokosuka, seeks a hybrid contract combining Firm-Fixed Price (FFP) and Time and Materials (T&M) lines for maintenance and repair work to be performed between 21 April 2027 and 19 June 2027, with an option period extending to 4 July 2027. Work must be conducted at the contractor’s facility within the U.S. 7th Fleet Area of Responsibility, with explicit exclusion of performance in India. The primary scope includes completing the MTA under MSC specification SSU SN 27-004, encompassing engineering support, OEM coordination, quality control compliance with ABS standards, and management of both Government-Furnished and Contractor-Furnished Material and Property. CLIN 0001 covers the base FFP work, while CLINs 0003 and 0004 are T&M, not-to-exceed lines for labor and material/subcontractor costs respectively, with strict prohibition against cost incurrence without prior written authorization from the Contracting Officer. The contract value for CLIN 0004 material costs is capped at $674,680.44, and all pricing must be submitted in net U.S. dollars. Compliance with federal acquisition regulations is mandatory, including FAR, DFARS, and NMCARS, with specific clauses covering payment terms, security, ethical conduct, and unique item identification requiring adherence to MIL-STD-129 and MIL-STD-130 for labeling and UID marking. Offerors must maintain an active SAM.gov registration and provide their Unique Entity Identifier (UEI) to access secure documents via DoD SAFE, which includes the critical Work Item Package, Quality Assurance Surveillance Plan, Contract Administration Plan, and other attachments not publicly posted. Proposal submissions must be electronic, in English, formatted as a single ZIP file with Volume 1 containing only pricing data in Microsoft Excel or compatible formats, using Times New Roman 12-point font on A4 or 8.5 x 11-inch paper with one-inch margins. Proposals are evaluated on a lowest price technically acceptable basis, with technical and past performance rated as acceptable or unacceptable—failure in either disqualifies an offeror. Invoicing must be
Navsup Flt Logistics Ctr Yokosuka

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 336611
New
Federal
Essayons Overhaul FY27The U.S. Army Corps of Engineers, Portland District, is preparing to award a firm fixed price with incentives job order under a Master Ship and Repair Agreement for the comprehensive overhaul, maintenance, and repair of the Dredge Essayons, a 200-foot trailing arm suction hopper dredge built in 1980. All work must be performed at the contractor’s facility, with the government delivering the vessel and conducting dock and sea trials upon completion. The period of performance runs from August 2026 through February 2027, with a mandatory 60-day drydock period between December 2026 and February 2027. Key activities include renewal of the U.S. Coast Guard Certificate of Inspection, endorsement of the American Bureau of Shipping International Load Line Certificate, and completion of a drydock examination and internal structural review. The contract includes a wide range of repair and maintenance tasks such as hull coating and cleaning, propeller and tailshaft replacement, stern tube seal replacement, sluice and jetting valve overhauls, anchor chain locker reconditioning, and bilge and fire suppression services. Only contractors with an existing Master Ship and Repair Agreement with USACE Portland District for the overhaul of the YAQUINA are eligible to submit bids, and companies without such an agreement must first submit a capabilities package through the sources sought notice prior to bidding. Bids must originate from contractors located in Alaska, California, Oregon, or Washington, and a location differential will be applied to bids from sites more than 300 nautical miles from Portland, OR, factoring in travel and per diem costs. The solicitation will be conducted electronically under FAR Part 14 Sealed Bidding, requiring all offerors to be registered in SAM.gov and to complete a mandatory pre-bid site visit. The NAICS code is 336611, and the acquisition is not considered commercial. The solicitation number is W9127N26BA029, expected to be released July 2, 2026, with a response deadline of July 1, 2026, though the bid due date will be specified in the official solicitation. Small business assistance is available through the Portland District’s Small Business Specialist.
W071 Endist Portland

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 336611
New
Federal
DRYDOCK: USCGC NARWHAL DD FY2027
Sflc Procurement Branch 1(00080)

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 336611
New
Federal
USS RALPH JOHNSON (DDG114) FY26 CMAV 6A1The contract pertains to the USS RALPH JOHNSON (DDG-114) and involves a single Task Group Instruction (TGI) for ship repair, overhaul, preservation, and replacement work to be conducted aboard the vessel at Commander, Fleet Activities Yokosuka in Japan. The period of performance is strictly defined as August 17, 2026, through September 6, 2026, with all work required to be completed within this window unless an individual TGI’s duration exceeds the overall completion date, in which case a formal extension may be considered. Proposals must be submitted electronically by July 22, 2026, at 10:00 AM to the designated point of contact, and all submissions must be in English and compatible with Microsoft Office Suite 2016 or Adobe Acrobat Reader 2017. Offerors must request access to critical technical references—such as work specifications, drawings, and task group instructions—through the DoD SAFE system, and must include completed attachments including the Proposal Breakdown Form, Warranty Tracking Information, and Request for Information Sheet. A firm fixed-price arrangement applies, with payment in Japanese Yen based on a FY26 budget exchange rate of JPY 150.4415 to USD 1.00, while U.S. dollar figures are for administrative use only. The scope includes replacing the nonskid system on the 01 level midship, and all work must adhere to NAVSEA Standard Items, SRF-JRMC Local Standard Items, and applicable military specifications, including qualified product listings. Only firms holding an active U.S. Navy MSRA/ABR certification as prime contractors are eligible for award, and foreign entities must provide documented proof of legal authorization to operate and do business in Japan under DFARS 252.225-7042; failure to meet either criterion results in disqualification. Proposals must affirm compliance with hazardous material declarations per FAR 52.223-3 and DFARS 252.223-7001, and indicate if sea transportation is anticipated per DFARS 252.247-7022. All offerors must be registered in SAM, maintain current certifications for representations such as independent price determination, whistleblower rights, and antiterrorism training, and comply with cybersecurity requirements including safeguarding covered defense information under DFARS 25
Navsup Flt Logistics Ctr Yokosuka

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 336611
New
Federal
Marine Boatyard Support and Industrial Support Lot II Follow-on MAC-IDIQThe Southwest Regional Maintenance Center is soliciting proposals for a follow-on indefinite delivery/indefinite quantity contract to provide comprehensive marine boatyard and industrial support services for U.S. Navy vessels and equipment measuring 15 meters or 50 feet in length and greater, up to 260 feet, as well as smaller craft that must be transported via waterway. The scope includes repairs, modifications, upgrades, service life extensions, dry-docking, hull preservation, habitability improvements, and maintenance of boats, crafts, lighterage, habitability barges, and ancillary support equipment such as trailers, launch and retrieval systems, and hoisting devices. Work must be performed at contractor facilities within a 125-mile radius of Naval Base San Diego, California, and must comply with the latest NAVSEA Standard Items and applicable federal acquisition regulations. The contract will support the Navy’s berthing and messing program, and delivered items must be returned to service as mission-ready assets. This acquisition is a Total Small Business Set-Aside under NAICS code 336611, limited to small businesses with 1,300 or fewer employees. Proposals must be submitted through the Procurement Integrated Enterprise Environment and System for Award Management, and offerors must possess an approved Quality System per NAVSEA 009-04 at the time of award. Evaluation will prioritize past performance, technical capability, and price under a best-value framework. The contract is expected to be awarded as a multiple-award, five-year IDIQ with five annual ordering periods, and is open to all responsible small business sources regardless of prior Master Ship Repair Agreement or Agreement for Boat Repair status. The solicitation closes on July 30, 2026, and all activities must adhere to FAR, DFARS, and NMCARS guidelines.
Southwest Regional Maintenance Center

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 336611
New
Federal
LSD-47 MOUNTING BRACKET FOR SUPPLY VENT FAN MOTOR IN 1-52-1-Q; REPLACEThe work requires replacing the mounting bracket for the supply vent fan motor on the USS RUSHMORE (LSD-47) at SASEBO, Japan, and is exclusively open to contractors authorized to operate and do business in Japan under DFARS 225.1103 (3) and 252.225-7042. Only entities holding an active Master Ship Repair Agreement (MSRA) or Agreement for Boat Repair (ABR) in Japan, or those willing to execute one before award, may respond; offers from contractors outside Japan without clear proof of compliance will be disqualified. The solicitation is issued by the NAVSUP Fleet Logistics Center Yokosuka Site Sasebo under solicitation number N6264926Q1069, with a response deadline of July 28, 2026, and is classified under NAICS code 336611. Access to attachments, which contain Controlled Unclassified Information, is restricted to eligible MSRA/ABR holders in Japan, and non-eligible parties will have access requests denied. All inquiries must be directed to the primary point of contact, Masako Matsueda, via the provided email or phone number.
Navsup Flt Logistics Ctr Yokosuka

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 336611
New
Federal
DOCKSIDE: USCGC BENJAMIN BOTTOMS UPDS FY26 - NR2 MDE RENEW
Sflc Procurement Branch 1(00080)

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 336611
New
Federal
USCGC FIR (WLB 213) DOCKSIDE REPAIR FY26The contract solicitation RFQ#70Z08526QIBCT0048 is for dockside repairs to the USCGC FIR (WLB 213), a Coast Guard cutter homeported in Cordova, Alaska, under Full and Open Competition with no set-aside. The requirement is structured as an Indefinite Delivery Requirement Contract (IDR) with a Firm Fixed Price basis for the initial task order, and the period of performance is from September 1, 2026, to November 11, 2026, with an anticipated award date of August 25, 2026. Work includes a comprehensive scope of dockside maintenance tasks such as fire prevention systems inspection, potable water tank cleaning, hydraulically operated cargo hatch service, commercial cleaning of vent ducts across multiple vessel spaces, compressed air system maintenance, and replacement of approximately two feet of 90/10 CuNi sewage piping. All work must comply with SFLC Standard Specification 0000 and 5000, including specific requirements for surface preparation, in-process quality controls, and documentation using standardized inspection forms like QA-3a and QA-3b for surface profiling. The place of performance is the vendor’s facility or pier, and deliverables are FOB Destination. Proposals must be submitted in three separate emails by 2 PM PST on July 20, 2026, with each part labeled as Part I (Price Quote), Part II (Technical Capability), and Part III (Past Performance), each accompanied by required attachments including the completed Pricing Sheet in both digital spreadsheet and electronically signed PDF formats. The evaluation process prioritizes Technical Capability as the most important factor, followed by Past Performance, with Price being determinative only if those two factors are equal; awards will be made using a best value trade-off approach. All offerors must be registered in SAM, hold a valid Unique Entity ID, and comply with numerous FAR and HSAR clauses including 52.212-4 (Contract Terms and Conditions—Commercial Products and Commercial Services), 52.216-21 (Requirements) with specific deviations, and HSAR deviations 25-09 and 26-04. Additional compliance requirements include adherence to Buy American provisions, anti-trafficking policies, and prohibitions against contracting with debarred entities. Access to export-controlled documents requires JCP certification as a U.S
Sflc Procurement Branch 2(00085)

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 336611
New
International
F1782-26C118 - CCGS Captain Goddard Alongside Refit - Starboard Propulsion GearboxThe Canadian Coast Guard is seeking a contractor to perform an alongside refit on the CCGS Captain Goddard at the Institute of Ocean Sciences in British Columbia, focusing specifically on the starboard propulsion gearbox. The work is scheduled to take place between 5 August 2026 and 16 September 2026, with all bidding activity restricted to suppliers located in Western Canada, as dictated by the Area of Origin sourcing strategy. A bidders’ conference will be held in Sidney, BC, followed immediately by a site visit onboard the vessel to provide potential contractors with direct access to the work environment and technical requirements. The solicitation, identified as WS5763968141, was posted on 13 July 2026, with responses due by 21 July 2026. The contract falls under NAICS code 336611 for shipbuilding and repairing, and is managed by the Government of Canada through Public Services and Procurement Canada, with Mary Parsons serving as the primary contracting authority and point of contact.
Department of Public Works and Government Services

POSTED

1 day ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541330
New
DIBBS
Government First Article Inspection and TestingThe contract requires the performance of a first article inspection and testing on an aircraft structural fitting to ensure full compliance with drawing 7574876. This includes detailed dimensional measurements, verification of material specifications, non-destructive testing, and the preparation of a formal inspection report. All work must demonstrate adherence to the technical requirements outlined in the drawing and meet applicable quality standards for aerospace components. The effort is designated as a subcontract under a Total Small Business Set-Aside, meaning only small businesses can bid, and it is classified under NAICS code 541330, which pertains to engineering services. The solicitation was posted by the ASC Commodities Division of the Department of Defense and is open for response until July 27, 2026, with no specific location provided for performance.
Engineering Services

POSTED

about 21 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332312
New
DIBBS
Precision Manufacturing of Aircraft Structural FittingThe contract involves the precision manufacture of a critical safety aircraft structural fitting identified by Part Number S03-02-R-100, following the specifications outlined in drawing 7574876. The scope encompasses full production lifecycle activities including material sourcing, machining, heat treatment, and surface finishing, all required to meet stringent aerospace industry standards for structural integrity, durability, and safety compliance. All work must be performed in accordance with applicable aerospace quality and inspection protocols to ensure the component meets mission-critical performance requirements. This is a total small business set-aside under the SBA program as defined by FAR 19.5, with the NAICS code 332312 classifying it under forge and stamping manufacturing. The contract is issued under the Department of Defense’s ASC Commodities Division and is structured as a subcontract. Proposals must be submitted by the deadline of July 27, 2026, with the solicitation published on July 17, 2026. All manufacturing activities are expected to adhere to defense supply chain requirements, and the place of performance is not specified, implying flexibility as long as compliance and delivery obligations are met.
Fabricated Structural Metal Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541330
New
DIBBS
Quality Assurance and Inspection at OriginThe contract titled Quality Assurance and Inspection at Origin requires the contractor to perform inspection and acceptance of supplies at the point of production or packaging, in strict adherence to contract clause 52.246-9008. This work is designated as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to participate as defined by the SBA and FAR 19.5. The NAICS code 541330 identifies the scope as ranging within architectural, engineering, and related services, indicating the nature of the quality assurance activities involves technical oversight and compliance evaluation rather than direct manufacturing. The solicitation was posted on July 17, 2026, with a response deadline of July 27, 2026, and is managed by the ASC Commodities Division within the Department of Defense, though specific point of contact and place of performance details are not provided. The contract emphasizes the importance of ensuring supplies meet required standards prior to shipment, with inspections conducted directly at the origin, which may include facilities across various locations. Compliance with the referenced clause mandates adherence to federal procurement quality assurance procedures, requiring detailed documentation, evaluation criteria, and acceptance protocols to be followed during inspection. The absence of explicit location or contact information suggests the contractor must be prepared to perform at any production or packaging site tied to the supply chain, and the lack of defined city or state for performance implies a potentially nationwide scope requiring logistical flexibility and readiness to deploy inspection personnel as needed. The contract is accessible through the DIBBS portal for further procedural details.
Engineering Services

POSTED

about 21 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541611
New
DIBBS
ITAR/EAR Compliance and Export-Controlled Data HandlingThe contract mandates strict compliance with ITAR and EAR regulations for all suppliers and subcontractors handling export-controlled technical data, ensuring that only authorized entities with proper registration and documentation are engaged in work involving sensitive information. All parties must demonstrate adherence to U.S. export control laws as a condition of participation, with failure to comply potentially resulting in termination or penalties. The solicitation is designated as a Total Small Business Set-Aside under the SBA program, restricting eligibility to small businesses as defined by the NAICS code 541611, which pertains to management consulting services. The award is issued by the ASC Commodities Division under the Department of Defense, with responses due by July 27, 2026, and performance expected to occur under the terms of a subcontract agreement. Participation requires proactive verification of regulatory standing and ongoing compliance monitoring for the duration of the contract.
Administrative Management and General Management Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541611
New
DIBBS
Subcontracting Plan Compliance and Small Business OutreachThe contract requires the development and execution of a federal subcontracting plan designed to ensure compliance with Department of Defense regulations and Small Business Administration guidelines for maximizing participation by disadvantaged, minority, and women-owned businesses. The goal is to meet specific targets for DBE, MBE, and WBE subcontracting as mandated by the Federal Acquisition Regulation and SBA rules, with all activities aligned to a total small business set-aside under FAR 19.5. The work focuses on strategic outreach, monitoring, documentation, and reporting to demonstrate consistent adherence to small business utilization standards throughout the contract performance period. The solicitation, issued under NAICS code 541611 for management consulting services, is administered by the ASC Commodities Division within the Department of Defense and is open for response through July 27, 2026. All subcontracting efforts must be structured to promote equitable access and measurable outcomes for certified small, minority, and women-owned businesses, with full transparency and accountability required in tracking participation. The successful contractor will be responsible for designing, implementing, and sustaining a comprehensive subcontracting strategy that aligns with federal obligations and supports the agency's commitment to small business procurement goals.
Administrative Management and General Management Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332999
New
DIBBS
Critical Safety Item (CSI) Manufacturing and SupplyThe contract involves the manufacture and delivery of Critical Safety Items specified by the U.S. Navy, with stringent requirements for sourcing controls, component traceability, and full compliance with defense-specific technical and quality standards. These items are essential to mission-critical systems and must be produced under strict regulatory oversight to ensure reliability and safety throughout their lifecycle. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, and the NAICS code 332999 indicates the work falls under other fabricated metal product manufacturing. All production and delivery activities must adhere to military specifications, and suppliers are expected to implement robust documentation and audit-ready tracking systems for every component and process step. The solicitation was posted on July 17, 2026, with a deadline for responses on July 27, 2026, and is managed by the ASC Commodities Division under the Department of Defense. There is no specified place of performance, suggesting flexibility in manufacturing locations provided all requirements are met, and no point of contact is listed, implying inquiries must be directed through the official DIBBS portal referenced in the link. The nature of the work demands a high level of precision and accountability, with failure to meet traceability or compliance standards likely resulting in disqualification or contract termination. Suppliers must be prepared to demonstrate proven capability in handling sensitive defense components and maintaining data integrity across the supply chain.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection and Product Verification TestingThe contract requires the performance of in-process and final inspections on bushing assemblies in accordance with MIL-STD-1916 or ASQ H1331 standards, ensuring compliance with rigorous quality and verification protocols. The contractor is responsible for generating accurate test reports and providing full support to Government acceptance activities, demonstrating consistent adherence to defense-grade quality requirements throughout the production lifecycle. This work is critical to validating the integrity and functionality of components used in defense systems. This is a small business set-aside subcontract under the SBA program, classified under NAICS code 541330, and issued by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 17, 2026, with a response deadline of July 27, 2026. While specific location details are not provided, the place of performance is tied to defense operations under the DLA umbrella, and all submissions must be made through the designated DIBBS portal. The contract emphasizes the need for qualified small business entities capable of delivering precise inspection services under strict military specifications.
Engineering Services

POSTED

about 21 hours ago

DEADLINE

in 9 days
View Details
NAICS: 483112
New
DIBBS
Domestic and International Freight Logistics (U.S.-Flag Vessel Compliance)The contract requires the arrangement of domestic and international freight logistics for the shipment of bushing assemblies to locations within the continental United States, with strict adherence to U.S.-flag vessel requirements mandated by the Cargo Preference Act for all ocean freight portions. This ensures compliance with federal regulations that prioritize the use of American-owned and flagged vessels for the transportation of government cargo. The solicitation is structured as a subcontract under a Total Small Business Set-Aside designation, exclusively available to small businesses certified by the Small Business Administration, and is classified under NAICS code 483112, which pertains to foreign ocean transportation. The opportunity was posted on July 17, 2026, with a response deadline of July 27, 2026, and is overseen by the ASC Commodities Division of the Department of Defense, with performance tied to U.S. domestic destinations. The requirement emphasizes logistical precision, regulatory compliance, and small business participation in fulfilling defense-related supply chain needs.
Deep Sea Passenger Transportation

POSTED

about 21 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541611
New
DIBBS
Supply Chain Traceability and Documentation ManagementThe contract requires the maintenance of fully auditable records to ensure complete traceability of material origin, certifications, inspections, and adherence to all Government traceability mandates, specifically in compliance with DFARS requirements. All documentation must support transparency and accountability throughout the supply chain, enabling verification of source materials and compliance with defense contracting standards. The contractor must implement systems and procedures capable of sustaining rigorous audit readiness and meeting every contractual obligation related to documentation integrity and regulatory compliance. This is a small business total set-aside subcontract under NAICS code 541611, issued by the Department of Defense’s ASC Commodities Division. Responses are due by July 27, 2026, and performance is expected to align with federal defense supply chain protocols. The contract emphasizes strict adherence to traceability standards and requires proven capability in managing complex documentation systems under federal oversight. While specific location details are not provided, all work must satisfy DoD requirements for origin verification and material accountability.
Administrative Management and General Management Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 9 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Marking, and Labeling ServicesThe contract seeks qualified small businesses to provide military-compliant packaging, preservation, and labeling services for bushing assemblies, adhering strictly to DLA and MIL-STD-129 standards. Essential requirements include accurate barcode application, application of special handling labels, and full compliance with defense logistics protocols to ensure traceability, durability, and readiness for military distribution. The work must be performed in accordance with federal regulations governing packaging integrity and labeling accuracy to support the Department of Defense’s supply chain standards. This is a total small business set-aside under NAICS code 493190, restricted exclusively to small businesses as defined by the SBA, and is issued as a subcontract by the ASC Commodities Division within the Department of Defense. Responses are due by July 27, 2026, with the solicitation posted on July 17, 2026, and all work expected to align with DLA’s logistical demands for defense components. The place of performance and point of contact details are not specified, but all proposals must demonstrate readiness to meet stringent military packaging and documentation requirements without deviation.
Other Warehousing and Storage

POSTED

about 21 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332710
New
DIBBS
Precision Machining of Bushing Assembly (NSN 5365-01-541-2220)The contract pertains to the manufacture and delivery of precision bushing assemblies identified by NSN 5365-01-541-2220, requiring strict adherence to military specifications throughout production. Work includes CNC machining to exact tolerances, comprehensive inspection processes, and full compliance with traceability and packaging standards mandated for defense applications. The contract is structured as a subcontract under a total small business set-aside, reserved exclusively for small businesses as defined by the SBA under FAR 19.5, with the NAICS code 332710 applicable to forged and stamped metal product manufacturing. The opportunity was posted on July 17, 2026, with responses due by July 27, 2026, and is issued by the ASC Commodities Division under the Department of Defense. Performance is expected to occur at an undefined location, and all deliverables must meet federal defense supply chain requirements, ensuring readiness for military use.
Machine Shops

POSTED

about 21 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335931
New
DIBBS
Small Business and DBE/MBE/WBE Subcontracting ParticipationThis contract opportunity is designed to facilitate participation by small, disadvantaged, minority-owned, and women-owned businesses in supply or compliance roles under a prime contract managed by the ASC Commodities Division within the Department of Defense. The solicitation, identified by the NAICS code 335931, focuses on subcontracting engagement and does not specify a set-aside type, meaning it is open to qualified entities meeting ownership and size criteria without formal classification under a specific program. Interested businesses must respond by the deadline of August 16, 2026, to be considered for inclusion in the workforce supporting the prime contract's delivery and compliance requirements. The work will be performed without a specified geographic location, indicating potential flexibility in performance sites. Participation is facilitated through the DIBBS platform, where full details and submission protocols can be accessed.
Current-Carrying Wiring Device Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 29 days
View Details