This Solicitation opportunity from Department Of Defense was posted on May 19, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

DISPLAY, OPTOELECTRO

Closed

SPE4A5-26-T-164CFederal

Submission Closed05/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334413

New

DIBBS

Supply of Insulator Plate (NSN 5970004232896)This subcontract involves the manufacture and supply of insulator plates under NSN 5970004232896 for prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. The contractor is responsible for sourcing or producing the hardware components in strict accordance with specified technical requirements, with a critical prohibition against the use of additive manufacturing or 3D printing. The agreement requires the delivery of physical components FOB Destination within a 20-day window. This procurement falls under NAICS code 334413 and is managed through the DLA, with performance associated with FPO 09514.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supplier of Semiconductor Device, Diode (NSN 5961-01-026-2577)This subcontract, issued by the Department of Defense DLA Weapons Support Active Devices Division, requires the supply of two semiconductor diode units under NSN 5961-01-026-2577. The hardware must be delivered to Tobyhanna, Pennsylvania, and the supplier is required to hold qualifications for FSC 5961 and 5962. Strict adherence to military standards is mandatory, including packaging per MIL-STD-2073-1E and MIL-DTL-19491, and marking per MIL-STD-129 and IPC/JEDEC J-STD-609. Additionally, the provider must maintain full supply chain traceability in accordance with DLAD Procurement Note C03. The response deadline for this requirement is November 9, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Fixed Wire Wound Resistors (NSN 5905-01-063-8462)This subcontract involves the supply of 5,000 fixed wire wound resistors for prime contractors supporting DLA supply contracts. The components must be manufactured or sourced to meet NSN 5905-01-063-8462 specifications. All items require strict adherence to marking standards MIL-STD-129 and IPC/JEDEC J-STD-609, with packaging performed according to MIL-STD-2073-1E and RP001. The contract is managed by the Department of Defense under the DLA Weapons Support Active Devices Division, with performance taking place at Hill AFB. Compliance with the Buy American Act and DFARS 252.204-7012 is mandatory. The response deadline for this requirement is November 9, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Flashlights (NSN 6230014688129)This subcontract involves the procurement or manufacture of 457 flashlights for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program under the Department of Defense. All units must strictly adhere to the technical specifications for NSN 6230014688129, with detailed technical data accessible via the DLA portal. The contractor is responsible for packaging the items according to MIL-STD-2073-1E standards and shipping them FOB Origin to the place of performance in Tracy, California. The opportunity is categorized under NAICS code 334413, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Supply of Digital Microcircuits (NSN 5962-01-067-9523)This subcontract, issued by the DLA Weapons Support Active Devices Division of the Department of Defense, requires the supply of 115 digital microcircuits under NSN 5962-01-067-9523. The components must adhere to IPC/JEDEC J-STD-609 lead finish identification standards and be delivered with DLA Form 918 traceability documentation. To ensure component integrity, the contractor must utilize DOD qualified ESD/EMI protective packaging in accordance with MIL-PRF-81705, MIL-STD-2073-1E, and MIL-STD-129. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334413, with performance taking place in Columbus, Ohio. Prospective bidders are required to provide a CMMC Level 2 self-assessment. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Fluorescent Lamp Supplier (NSN 6240-01-317-1381)This subcontract through the Defense Logistics Agency requires a supplier to provide 926 fluorescent lamps meeting NSN 6240-01-317-1381 specifications for Department of Defense prime contractors. The selected vendor must maintain an active SAM registration and ensure all materials are packaged according to ASTM D3951 and labeled in compliance with MIL-STD-129. The performance of this contract will take place in Phoenix, Arizona, under NAICS code 334413. Interested parties must submit their responses by the deadline of November 9, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Waveguide Horn Covers (NSN 5985-00-545-4790)This subcontract involves the manufacture or procurement of seven waveguide horn covers, identified by NSN 5985-00-545-4790, for prime contractors supporting the Defense Logistics Agency Weapons Support Maritime Supply Chain. The selected provider must ensure all units are marked according to MIL-STD-129 and packaged in strict compliance with DLA requirement RP001. The contract falls under NAICS code 334413 and mandates rigorous security and data handling standards, specifically requiring CMMC Level 2 and DFARS 252.204-7012 compliance. Interested parties must submit their responses by November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supplier of Memory Microcircuits (NSN 5962-01-567-9623)This subcontract involves the supply of eight memory microcircuits, specifically NSN 5962-01-567-9623, to prime contractors supporting the DLA Weapons Support Active Devices Division. The selected supplier is responsible for manufacturing or sourcing these components using cleanroom facilities and ESD-protected handling. Strict adherence to technical standards is required, including IPC/JEDEC J-STD-609 for lead finish markings and MIL-STD-2073-1E and MIL-STD-129 for packaging. The contract mandates compliance with the Buy American Act and DFARS cybersecurity regulations. Deliveries must be accompanied by DLA Form 918 and full traceability documentation. Performance for this requirement is centered in Columbus, Ohio, under NAICS code 334413, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Push Switches (NSN 5930-01-062-4904)This subcontract involves the supply of push switches identified by NSN 5930-01-062-4904 for prime contractors supporting the Department of Defense DLA Weapons Support Maritime Supply Chain. The selected source or manufacturer must provide one unit of the specified switch, ensuring compliance with RP001 packaging requirements and strict mercury-free material restrictions. The use of approved additive manufacturing processes is permitted to meet the technical specifications. The opportunity is categorized under NAICS code 334413 and was posted on October 28, 2026, with a response deadline of November 9, 2026. All deliverables must be packaged according to DLA specifications to ensure successful integration into the maritime supply chain.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Air Transducer Assembly ManufacturingThis subcontract involves the manufacture and assembly of 115 calibrated air transducer units for prime contractors supporting DLA Troop Support supply contracts. The scope of work includes precision machining, assembly, and calibration of the transducer sensor and housing in strict accordance with NSN 4930-01-535-7810. Performance must adhere to the RA001 DLA Master List and the Buy American Act, with a specific prohibition against the use of additive manufacturing. The project is managed under NAICS code 334413 for the Department of Defense, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 9, 2026, for this specialized production requirement.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Supplier of Light Emitting Diode (NSN 5980-01-724-8546)This subcontract opportunity is issued by the Department of Defense DLA Weapons Support Active Devices Division for the procurement of one Light Emitting Diode under NSN 5980-01-724-8546. The selected supplier must source or produce the component in strict accordance with the specified NSN and the DLA Master List of Technical and Quality Requirements RA001. All components must be packaged according to MIL-STD-2073-1E, and the use of additive manufacturing is strictly prohibited. Eligible bidders must possess a valid CAGE code and Unique Entity ID to participate. The contract requires the delivery of the LED to a designated inspection point in FPO 96616. Responses to this solicitation are due by November 9, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Fixed Wire Wound Noninductive ResistorsThis subcontract involves the supply of fixed, wire wound, noninductive resistors to prime contractors for DLA and Army electronic component contracts. The scope of work requires the manufacture or procurement of one unit of NSN 5905-01-106-7481, specifically Part RE80N38R3, in strict accordance with MIL-PRF-18546/2C(4) specifications. All deliverables must adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 and IPC/JEDEC J-STD-609 for marking requirements. Managed by the Department of Defense under the DLA Weapons Support Active Devices Division, the contract is categorized under NAICS code 334413. The delivery terms are established as FOB Origin, with the place of performance located at Fort Bliss, Texas. The response deadline for this requirement is November 9, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 12 days

AI Contract Overview

The contract is for the procurement of 16 units of an optoelectronic CDU LCD display, identified by NSN 5980-01-530-4040 and part number 8527420-902 from Honeywell International Inc., under solicitation SPE4A5-26-T-164C. Delivery is required 298 days after award to DLA Distribution San Diego, with FOB Origin terms, and the item is classified as an electrostatic and electromagnetic sensitive device, necessitating strict compliance with MIL-PRF-81705 for ESD and EMI protective packaging. The packaging must adhere to MIL-STD-2073-1E and RP001 DLA Packaging Requirements, using verified QPL-81705 materials including Type I and Type III barrier materials, and all items must be handled and opened only at approved ESD workstations. Marking must conform to MIL-STD-129 with the special code 39 indicating ESD sensitivity, and while Item Unique Identification is not required, bare part marking with manufacturer, part number, and NSN is mandatory. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331, Table 1 with zero non-conformances expected unless otherwise specified, and the supplier must maintain an ISO 9001:2015 or equivalent quality system. Cybersecurity requirements include CMMC Level 2 self-assessment and compliance with DFARS 252.204-7012 for safeguarding covered defense information. The contract incorporates numerous technical and quality requirements from the DLA Master List, including configuration management and deviation procedures under RQ002, and prohibits the use of hazardous substances such as hexavalent chromium. Payments must be submitted electronically via WAWF, and the solicitation is open to small businesses with no set-aside specified. The award is intended to be on a fixed-price basis, though the contract type is not explicitly stated, and proposals must be submitted via DIBBS by May 27, 2026, with delivery mandated no later than June 27, 2027.

General Info

Procurement of 16 OPTO ELECTRONIC CDU LCD units with strict quality, packaging, cybersecurity, and delivery requirements.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

NAICS

334413 - Semiconductor and Related Device Manufacturing

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, USA

Set-Aside

NONE

Documents

RFQ SPE4A5-26-T-164C Request for Quotations DLA Aviation

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 19

Combined Synopsis

Response DeadlineMay 27

Deadline has passed

Submission Closed

05/27/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

Office AddressUSA

Contacts

JESSICA Baake

contact@example.gov

+1 (555) 000-0000

Full Description

DISPLAY,OPTOELECTRO
OPTO ELECTRONIC CDU LCD
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
--
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
--
ESD and PHYSICAL protection are required for contacts, leads, terminals, and other protrusions by means of container design, cushioning, and/or other ESD protective devices. Components with pins or leads shall have adequate cushioning to PREVENT DAMAGE, BREAKAGE and/or BENDING OF LEADS when not specified in the packaging codes.
This item requires DOD QUALIFIED Electrostatic Discharge (ESD) and/or Electromagnetic Interference (EMI) protective packaging materials in accordance with MIL-PRF-81705. All items subject to degradation from ESD/EMI environmental field forces shall be handled and packaged at an
SPE4A5-26-T-164C
SECTION B
approved field force protective work station.
For ESD protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used along with MIL-PRF-81705, Type III (MIL-DTL-117 Type II, Class H, Style 2) barrier material wrap if the contract doesn't specifically require ESD approved cushioning.
For EMI protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used.
The supplier shall be responsible for verifying that all MIL-PRF-81705 barrier materials (or converted bags) were supplied from a qualified manufacturer currently listed on QPL-81705.
For additional ESD/EMI packaging information, refer to the following DLA packaging website: https://www.dla.mil/HQ/LogisticsOperations/Packaging/PackFAQs/ESDS/
If the preservation method code in the solicitation does not specify ESD/EMI protection and the Offeror's proposed item of supply is subject to degradation from ESD/EMI environmental field forces, Offerors shall provide appropriate technical packaging data with their proposals. --
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
HONEYWELL INTERNATIONAL INC. 07187 P/N 8527420-902
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016847729 0001 EA 16.000
NSN/MATERIAL:5980015304040
DELIVERY (IN DAYS):0298
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:GX CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
SPE4A5-26-T-164C
SECTION B
PR: 7016847729 PRLI: 0001 CONT’D
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:XXX
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:39 -39 ESD sensitiv electrnic dvce
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ITEM IS CLASSIFIED AS AN ELECTROSTATIC/ELECTROMAGNETIC SENSITIVE DEVICE. PRECAUTIONARY PKGING , HANDLING, AND PROCESSING PROCEDURES SHALL BE USED TO PREVENT DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC and OTHER ENVIRONMENTAL FIELD FORCES. --------------------------------------------ALL ITEMS AND PACKAGES SHALL BE HANDLED AND OPENED AT AN APPROVED ESD WORKSTATION -ORFIELD SERVICE KIT. FOR FURTHER INFORMATION, CONSULT MIL-HDBK-773.
ESD and PHYSICAL protection are required for contacts, leads, terminals, and other protrusions by means of container design, cushioning, and/or other ESD protective devices. Components with pins or leads shall have adequate cushioning to PREVENT DAMAGE, BREAKAGE and/or BENDING OF LEADS when not specified in the packaging codes.
This item requires DOD QUALIFIED Electrostatic Discharge (ESD) and/or Electromagnetic Interference (EMI) protective packaging materials in accordance with MIL-PRF-81705. All items subject to degradation from ESD/EMI environmental field forces shall be handled and packaged at an approved field force protective work station.
For ESD protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used along with MIL-PRF-81705, Type III (MIL-DTL-117 Type II, Class H, Style 2) barrier material wrap if the contract doesn't specifically require ESD approved cushioning.
For EMI protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used.
The supplier shall be responsible for verifying that all MIL-PRF-81705 barrier materials (or converted bags) were supplied from a qualified manufacturer currently listed on QPL-81705.
For additional ESD/EMI packaging information, refer to the following DLA packaging website: https://www.dla.mil/HQ/LogisticsOperations/Packaging/PackFAQs/ESDS/
If the preservation method code in the solicitation does not specify ESD/EMI protection and the Offeror's proposed item of supply is subject to degradation from ESD/EMI environmental field forces, Offerors shall provide appropriate technical packaging data with their proposals.
PARCEL POST ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
SPE4A5-26-T-164C
SECTION B
PR: 7016847729 PRLI: 0001 CONT’D
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
Need Ship Date:03/22/2027 Original Required Delivery Date:06/27/2027
SPE4A5-26-T-164C NSN/Part Number: 5980-01-530-4040 Quantity: 16 EA Purchase Request: 7016847729QTY: 16 Delivery: 298 days ADO