Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Disposable Particulate Respirator Supply

Active

Federal

Response Deadline09/08/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of NIOSH-approved disposable particulate respirators intended for use in Personal Protection Kits. The procurement is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF, with the place of performance located at FPO 96661. The opportunity was posted on August 31, 2026, and requires responses by September 8, 2026. The contract falls under NAICS code 339113 and is accessible via the DIBBS portal.

General Info

DoD subcontract for NIOSH-approved disposable particulate respirators for Personal Protection Kits.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

FPO, AP, 96661, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE2DS-26-T-379J.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PROTECTION KIT, PERSONA

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 31

subcontract

Response DeadlineSep 8

Submission deadline

Response Deadline

09/08/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of NIOSH-approved disposable particulate respirators for inclusion in the Personal Protection Kit.

Similar Contracts

Same NAICS industry code

Surgical Suction Tubing SupplyThis subcontract opportunity with the Department of Defense, managed by the Medical Supply Chain MD Surg FSF, involves the procurement of non-sterile, clear PVC surgical suction tubing. The supplied tubing must be fully compatible with the ZOLL Medical Inc. Model 330M suction apparatus and adhere to all DLA technical requirements, federal packaging standards, and specific medical labeling guidelines. The project is categorized under NAICS code 339113 and will be performed at Fort Bragg, ZIP code 28310. Interested parties must submit their responses by the deadline of September 8, 2026, following the posting date of August 31, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 6 hours ago

DEADLINE

MEASURE, LIQUID

Solicitation # SPE2DH-26-T-6313

This solicitation, issued by the Department of Defense Medical Supply Chain FSH, is for the procurement of one liquid measure unit under solicitation number SPE2DH-26-T-6313. The requirement is identified by NSN 6640-01-650-1144 and is associated with an unmounted water purification unit. The place of performance is designated as Camp Pendleton, California, with a required delivery timeline of 20 days after receipt of order. The contract adheres to NAICS code 339113 and incorporates specific technical and quality requirements as outlined in the DLA Master List, including DLA packaging requirements and the removal of government identification from non-accepted supplies. Interested parties must respond by the deadline of September 8, 2026, with primary coordination handled by Tina Vu.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 6 hours ago

DEADLINE

ADAPTER KIT, DENTAL SUC

Solicitation # SPE2DH-26-T-6325

This solicitation from the Department of Defense Medical Supply Chain is for the procurement of one Isolite Y-Adapter Kit for the Isolite Illuminated Dental Isolation System EIL0201. The item is identified by NSN 6520-01-668-6901 and has specific package dimensions of 7.375 inches long by 7.375 inches wide by 1.375 inches high, with a weight of 0.08 lbs. The contract requires delivery within 20 days after receipt of order. Bidders must specify the source and part number being supplied and adhere to DLA packaging requirements, quality standards, and regulations regarding the removal of government identification from non-accepted supplies. The response deadline for this solicitation is September 8, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 6 hours ago

DEADLINE

GLOVE, PATIENT EXAMININ

Solicitation # SPE2DS-26-T-379F

This solicitation from the Department of Defense Medical Supply Chain for Fort Bliss involves the procurement of four packages of patient examining gloves. The required gloves must be small, black nitrile rubber with a micro-roughened finish and beaded cuffs. They must also be ambidextrous, powder-free, non-sterile, and intended for single-use only, with each package containing 100 gloves. The contract specifies a delivery timeline of 20 days after the order is received. Bidders are required to provide the source and part number for the supplies and must adhere to DLA packaging and quality requirements. The solicitation is identified by number SPE2DS-26-T-379F and falls under NAICS code 339113.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 6 hours ago

DEADLINE

WASH BOTTLE, LABORATORY

Solicitation # SPE2DH-26-T-6315

This contract is for the procurement of laboratory wash bottles under solicitation SPE2DH-26-T-6315 for the Department of Defense Medical Supply Chain. The requirement specifies 250 ml plastic polyethylene bottles with a 2.5 inch diameter, issued in packages of 12 units each. The delivery is required within 5 days after receipt of order for the point of performance at Camp Pendleton. Suppliers must adhere to commercial packaging standards, ensuring each unit is in a sealed container to prevent damage and shipped in suitable exterior containers for safe delivery. All materials must be marked according to Medical Marking Standard No. 1. The acquisition is subject to DLA packaging requirements and technical quality standards as outlined in the DLA Master List, with specific attention to the removal of government identification from non-accepted supplies.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE8E6-26-T-4405

This contract is for the procurement of 100 units of swim fins under solicitation number SPE8E6-26-T-4405 for the Department of Defense. The items are identified by NSN 4220015473051 and correspond to part numbers from Aqualung USA, Inc and United SAR, Inc. Delivery is required within 232 days, with a required delivery date of September 28, 2026, shipped FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129. Prohibitions are placed on the use of asbestos and the intentional addition of mercury, except for specific functional exceptions. The contract specifies a zero percent quantity variance and designates the destination as the point for both inspection and acceptance.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

BOTTLE, SCREW CAP

Solicitation # SPE2DS-26-T-379X

This contract is a solicitation issued by the Department of Defense Medical Supply Chain for the procurement of one case of custom cleaned amber Boston round glass bottles. Each bottle has a one liter capacity and includes a screw cap, with the unit of issue defined as 12 bottles per case. The requirement is identified by NSN 6640-01-688-0898 and is associated with purchase request 7018100725. The delivery timeline is set for five days after the order is placed. Compliance with DLA master lists for technical and quality requirements, specific packaging standards, and the removal of government identification from non-accepted supplies is mandatory. The solicitation, numbered SPE2DS-26-T-379X, falls under NAICS code 339113 and is managed by the Medical Supply Chain MD SURG FSF.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 6 hours ago

DEADLINE

BANDAGE, ADHESIVE

Solicitation # SPE2DS-26-T-378H

This contract is a solicitation from the Department of Defense Medical Supply Chain for the procurement of sterile adhesive bandages measuring 0.75 by 3 inches in flesh or clear colors. The items consist of sterile dressings attached to plastic adhesive plaster with a two-piece removable facing material. The order is for one package containing 100 units under NSN 6510-00-597-7469, with a required delivery timeframe of 5 days after the order is placed to Camp Pendleton. The product must have a non-extendable shelf life of 36 months, and no more than 5 months may have passed from the date of manufacture to the date of delivery to the government. The contract adheres to DLA packaging requirements and technical quality standards as specified in the DLA Master List. This procurement is categorized under NAICS code 339113 and is managed by the Medical Supply Chain MD SURG FSF.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 6 hours ago

DEADLINE

APPLICATOR, DISPOSABLE

Solicitation # SPE2DS-26-T-378K

This contract is for the procurement of sterile, disposable applicators consisting of a six-inch wood rod with an absorbent tip. The items are packaged in sets of two per packet, with 100 packets per package, totaling 200 applicators per unit of issue. The product is FDA regulated and must be sourced from approved manufacturers such as Redi Products, Inc. or Medline Industries Inc. Compliance requires adherence to DLA packaging requirements, specifically Medical Marking Standard No. 1, and the prohibition of intentionally added mercury compounds. Delivery is set for 20 days after the order, with shipping terms as FOB Destination. The contract specifies a quantity of one package under NSN 6515-00-564-8242, with inspection and acceptance occurring at the destination point.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 6 hours ago

DEADLINE

BACKPACK, CASE, CARRYING

Solicitation # SPE2DH-26-T-6314

This contract is a solicitation for a replacement carrying case designed for use with the patient rescue and transport system, specifically accommodating a rolled litter with dimensions of 10 inches in diameter and 36 inches in length. The item is identified by NSN 6530-01-260-6703 and part number SK-202 from Skedco, Inc. The requirement is for one unit to be delivered FOB destination within 20 days after the order is placed. Compliance with DLA packaging and quality requirements is mandatory, including adherence to Medical Marking Standard No. 1 and the removal of government identification from any non-accepted supplies. The item is not an FDA regulated device. All units must be properly sealed in suitable containers to prevent damage during transit, and the contract specifies a zero percent quantity variance for the delivery.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 6 hours ago

DEADLINE

TOWELETTE, BENZALKONIUM

Solicitation # SPE2DS-26-T-379N

This contract is for the procurement of three packages of alcohol-free benzalkonium chloride impregnated antiseptic cleansing towelettes, identified by NSN 6510-01-483-3333. Each package contains 100 individually wrapped white nonwoven towelettes measuring 8.5 by 5 inches. The order is issued by the Department of Defense Medical Supply Chain and requires delivery within 20 days after receipt of the order to a performance location in FPO 96632. The supplies must have a non-extendable shelf life of 24 months, with a requirement that no more than three months have passed from the date of manufacture to the date of delivery to the government. The contract adheres to DLA master lists for technical and quality requirements, including specific packaging standards and regulations regarding the removal of government identification from non-accepted supplies. Covered Defense Information potentially applies to this acquisition.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 6 hours ago

DEADLINE

SEALING COMPOUND

Solicitation # SPE8ES-26-T-2671

This contract is for the procurement of black sealing compound, identified by NSN 8030015111245 and part number PR-2201 B1, in 2.5 fluid ounce kits. The agreement specifies a shelf life of six months and requires the product to be stored below 80 degrees Fahrenheit. Delivery is set for 20 days after order, with the destination and inspection point located at Fort Rucker, Alabama. Suppliers must adhere to strict hazardous materials guidelines, including the submission of Safety Data Sheets and compliant labeling in accordance with OSHA and Federal Standard 313-E. Packaging and marking must comply with MIL-STD-129 and DLA packaging requirements, with shipments to be sent via the fastest traceable means. The contract includes specific quality and technical requirements as outlined in the DLA Master List.

Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

Cybersecurity Compliance for Covered Defense InformationThis subcontract opportunity with the Department of Defense, specifically the Medical Supply Chain MD Surg FSF, focuses on ensuring cybersecurity compliance for covered defense information. The primary objective is the implementation and maintenance of NIST SP 800-171 controls to safeguard sensitive data in accordance with DFARS 252.204-7012 requirements. The project falls under NAICS code 541512 and is designated for performance at FPO 96661. Interested parties must submit their responses by the deadline of September 8, 2026, following the posting date of August 31, 2026.

Computer Systems Design Services

POSTED

about 6 hours ago

DEADLINE

Hazardous Materials Labeling and ComplianceThe Hazardous Materials Labeling and Compliance subcontract, issued by the Department of Defense under the Medical Supply Chain MD Surg FSF, requires the labeling of hazardous components within kits to ensure full compliance with OSHA’s Hazard Communication Standard 29 CFR 1910.1200. This requirement falls under NAICS code 541690 and is focused on maintaining safety and regulatory standards for medical supply chain components. The solicitation was posted on August 31, 2026, with a response deadline of September 8, 2026. Performance of the contract is designated for FPO, zip code 96661. Interested parties can find further details through the provided DIBBS link.

Other Scientific and Technical Consulting Services

POSTED

about 6 hours ago

DEADLINE

Vacuum-Sealed Rugged Packaging and Kit AssemblyThis subcontract with the Department of Defense, managed by the Medical Supply Chain MD Surg FSF, involves the assembly and vacuum-sealing of complete Personal Protection Kits. The contractor is responsible for ensuring the kits are housed in rugged, easy-to-open packaging designed to withstand extreme conditions. The project falls under NAICS code 325991 and is to be performed at a facility in FPO, zip code 96661. The solicitation was posted on August 31, 2026, with a response deadline of September 8, 2026.

Custom Compounding of Purchased Resins

POSTED

about 6 hours ago

DEADLINE

Supply of Disposable Adult Oxygen Rebreathing MasksThis subcontract, issued by the Department of Defense under the Medical Supply Chain MD Surg FSF, requires the supply of 10 disposable adult oxygen rebreathing masks. The order consists of two packages of five masks each and must strictly adhere to DLA specifications and National Stock Number 6515-01-519-6766. The contract falls under NAICS code 339112 and specifies a delivery timeline of 20 days. Performance for this requirement will take place at Fort Hood, Texas, with a response deadline of September 8, 2026.

Surgical and Medical Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of 1000ML Infusor, Pressure, Blood Collecting-Dispensing Bags with Gauge and BUB DisposableThis subcontract through the Department of Defense Medical Supply Chain involves the procurement of commercial off-the-shelf 1000ML blood collecting-dispensing bags. The required equipment must include a pressure infusor, gauge, and BUB disposable components, all of which must adhere to federal and military standards for packaging, labeling, and delivery. The opportunity is categorized under NAICS code 325414 and is managed by the Medical Supply Chain MD SURG FSF. Performance for this contract will take place at Fort Hood, Texas. Interested parties must submit their responses by the deadline of September 8, 2026.

Biological Product (except Diagnostic) Manufacturing

POSTED

about 6 hours ago

DEADLINE

SWAB, PROCTOSIGMOIDOSCO

Solicitation # SPE2DS-26-T-379D

This contract is a solicitation from the Department of Defense Medical Supply Chain for the procurement of nonsterile, disposable proctosigmoidoscopic swabs. Each unit consists of a 16-inch flexible stick with a preattached fibrous rayon tuft, specifically designed for use during sigmoidoscopy. The items are supplied in packages of 500 units, with the current request specifying one package under NSN 6515-01-163-8077. The agreement requires adherence to DLA master lists for technical and quality requirements, as well as specific packaging and government identification removal standards. Bidders must provide the source and part number being supplied. The delivery timeline is set for 20 days after the order is placed, with the place of performance located at Fort Bliss, Texas.

Surgical and Medical Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

VALVE, RESUSCITATOR

Solicitation # SPE2DS-26-T-378R

This contract is for the procurement of one box containing ten resuscitator valves under solicitation SPE2DS-26-T-378R for the Department of Defense. The required equipment features a three-layer filtration barrier system with a one-way duck bill valve, adjustable pressure settings from 5 to 20 cm H20, and an ISO standard 22mm ID connector for compatibility with resuscitation bag flow diverters. The items must be individually packaged and maintain a shelf life of 60 months, with a requirement that no more than nine months have passed from the date of manufacture to the date of government delivery. Delivery is expected within 20 days after receipt of order to Joint Base Charleston. The procurement must adhere to DLA master technical and quality requirements, specifically regarding packaging and the removal of government identification from non-accepted supplies.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

CULTURE MEDIUM, MOTI

Solicitation # SPE2DS-26-T-297C

The contract specifies the procurement of Culture Medium, Motility Determination, identified by NSN 6550-01-732-8840, in packages of 20 tubes each totaling 5 mL per tube, with a total order quantity of two packages. The product is a motility test medium containing TTC indicator, housed in 15mm x 103mm tubes, and must be stored refrigerated between 2°C and 8°C (36°F to 46°F) with strict prohibition against freezing. The item has a non-extendable shelf life of 12 months, and no more than one month may have elapsed from the date of manufacture to the date of delivery to the government. All labeling must include the date of manufacture, expiration or retest date, and the contract number or lot number, with markings strictly compliant with Medical Marking Standard No. 1 (MMS No. 1), which supersedes MIL-STD-129. Packaging must be commercial, with each unit sealed in a protective container and packed in suitable commercial shipping containers to ensure safe delivery at the lowest rate to the destination point of delivery in Williamsburg, VA. Parcel post is prohibited, and all shipments must use traceable freight methods, with ocean transport required to be via U.S.-flag vessels unless a waiver is obtained with prior notification to MARAD and the Contracting Officer. The item is subject to DLA Packaging Requirements (RP001) and must adhere to the latest revision of MMS1C for shelf-life markings, and the packaging structure must follow MIL-STD-2073-1E guidelines. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced under RA001. Inspections and acceptance occur at the destination, with the government responsible for verifying compliance with all requirements under FAR 52.246-2. Contractors must comply with a broad array of federal and defense regulations including safeguards for covered defense information under DFARS 252.204-7012, employment eligibility verification, combating human trafficking, hazardous material identification under 252.223-3, prohibitions on hexavalent chromium, and restrictions on covered defense telecommunications equipment. Proposals must be submitted electronically via the DIBBS portal by August 10, 2026, and must include the source and part number being supplied. The contract

Family Planning Centers

POSTED

about 6 hours ago

DEADLINE

CHLORINE TEST REAGENT

Solicitation # SPE2DS-26-T-379U

This contract is for the procurement of one package of chlorine test reagent ampules, specifically designed for low to medium range colorimetric analysis and compatible with kit K-2505. Each vacuum-sealed ampule features a 7mm diameter with a tapered, prescored tip, and is supplied in a package containing 30 units. The item is regulated by the FDA and is identified as a critical application item, with the specified manufacturer being Aquaphoenix Scientific, LLC under part number R-2505. The reagent has a non-extendable shelf life of 48 months and must adhere to strict DLA packaging and medical marking standards, including Medical Marking Standard No. 1. Delivery is required within 20 days to the USS William P Lawrence (DDG 110) via vessel shipment. The contract mandates full compliance with the DLA Master List of Technical and Quality Requirements and requires the bidder to specify the source and part number being supplied.

Family Planning Centers

POSTED

about 6 hours ago

DEADLINE

DYE SOLUTION, PLASTIC L

Solicitation # SPE2DS-26-T-379B

This contract is for the procurement of gray ophthalmic plastic lens dye solution, specifically 3 oz concentrates in 1 quart bottles. The order consists of three packages, with each package containing six quarts. The item is regulated by the FDA and must adhere to strict shelf life requirements of six months, with no more than one month elapsed from the date of manufacture to the date of delivery to the government. The supplier must comply with DLA packaging requirements and Medical Marking Standard No. 1, ensuring each unit is in a sealed container to prevent damage. The contract prohibits the intentional addition of mercury or mercury-containing compounds. Delivery is required within 42 days and is set as FOB Destination. The specified part number is 30100 from Brain Power Inc, under NSN 6540-01-205-2320.

Ship Building and Repairing

POSTED

about 6 hours ago

DEADLINE

MEDICAL SUPPLY SET, OBS

Solicitation # SPE2DS-26-T-379V

This contract is for the procurement of field obstetrical medical supply sets, identified by NSN 6545013692830. Each set is a comprehensive kit containing essential delivery items, including sterile exam gloves, umbilical cord clamps, a disposable scalpel, a bulb syringe, a placenta bag, and various sterile gauzes, towels, and baby bunting. The items are regulated by the FDA and must adhere to Medical Marking Standard No. 1 and DLA packaging requirements. The agreement covers multiple line items for delivery to various naval vessels, including the USNS Earl Warren, USS Princeton, USS Somerset, and USNS Kanawha. Delivery is required within five days after the order, with required delivery dates set for September 2026. All shipments must be delivered FOB Destination and packed in sealed unit containers capable of protecting the contents from damage during transit.

Ground or Treated Mineral and Earth Manufacturing

POSTED

about 6 hours ago

DEADLINE