Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SWIM FINS

Active
SPE8E6-26-T-4405Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 100 units of swim fins under solicitation number SPE8E6-26-T-4405 for the Department of Defense. The items are identified by NSN 4220015473051 and correspond to part numbers from Aqualung USA, Inc and United SAR, Inc. Delivery is required within 232 days, with a required delivery date of September 28, 2026, shipped FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129. Prohibitions are placed on the use of asbestos and the intentional addition of mercury, except for specific functional exceptions. The contract specifies a zero percent quantity variance and designates the destination as the point for both inspection and acceptance.

General Info

DoD procurement of 100 swim fins delivered to DLA New Cumberland by September 2026.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE8E6-26-T-4405.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUSA
Contacts
John Lieb
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SWIM FINS
SWIM FINS
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
NO ASBESTOS AS DEFINED IN FED-STD-313 IS
PERMITTED IN THIS ITEM
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
AQUALUNG USA, INC 94120 P/N 6211-30
UNITED SAR, INC. 756R8 P/N FA2480101L
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE8E6-26-T-4405
SECTION B
PR: 7018102688 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018102688 0001 EA 100.000
NSN/MATERIAL:4220015473051
DELIVERY (IN DAYS):0232
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:00/00/0000 Original Required Delivery Date:09/28/2026
SPE8E6-26-T-4405 NSN/Part Number: 4220-01-547-3051 Quantity: 100 EA Purchase Request: 7018102688QTY: 100 Delivery: 232 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339113
New
DIBBS
MEASURE, LIQUID
Solicitation # SPE2DH-26-T-6313
This solicitation, issued by the Department of Defense Medical Supply Chain FSH, is for the procurement of one liquid measure unit under solicitation number SPE2DH-26-T-6313. The requirement is identified by NSN 6640-01-650-1144 and is associated with an unmounted water purification unit. The place of performance is designated as Camp Pendleton, California, with a required delivery timeline of 20 days after receipt of order. The contract adheres to NAICS code 339113 and incorporates specific technical and quality requirements as outlined in the DLA Master List, including DLA packaging requirements and the removal of government identification from non-accepted supplies. Interested parties must respond by the deadline of September 8, 2026, with primary coordination handled by Tina Vu.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
ADAPTER KIT, DENTAL SUC
Solicitation # SPE2DH-26-T-6325
This solicitation from the Department of Defense Medical Supply Chain is for the procurement of one Isolite Y-Adapter Kit for the Isolite Illuminated Dental Isolation System EIL0201. The item is identified by NSN 6520-01-668-6901 and has specific package dimensions of 7.375 inches long by 7.375 inches wide by 1.375 inches high, with a weight of 0.08 lbs. The contract requires delivery within 20 days after receipt of order. Bidders must specify the source and part number being supplied and adhere to DLA packaging requirements, quality standards, and regulations regarding the removal of government identification from non-accepted supplies. The response deadline for this solicitation is September 8, 2026.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
GLOVE, PATIENT EXAMININ
Solicitation # SPE2DS-26-T-379F
This solicitation from the Department of Defense Medical Supply Chain for Fort Bliss involves the procurement of four packages of patient examining gloves. The required gloves must be small, black nitrile rubber with a micro-roughened finish and beaded cuffs. They must also be ambidextrous, powder-free, non-sterile, and intended for single-use only, with each package containing 100 gloves. The contract specifies a delivery timeline of 20 days after the order is received. Bidders are required to provide the source and part number for the supplies and must adhere to DLA packaging and quality requirements. The solicitation is identified by number SPE2DS-26-T-379F and falls under NAICS code 339113.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
WASH BOTTLE, LABORATORY
Solicitation # SPE2DH-26-T-6315
This contract is for the procurement of laboratory wash bottles under solicitation SPE2DH-26-T-6315 for the Department of Defense Medical Supply Chain. The requirement specifies 250 ml plastic polyethylene bottles with a 2.5 inch diameter, issued in packages of 12 units each. The delivery is required within 5 days after receipt of order for the point of performance at Camp Pendleton. Suppliers must adhere to commercial packaging standards, ensuring each unit is in a sealed container to prevent damage and shipped in suitable exterior containers for safe delivery. All materials must be marked according to Medical Marking Standard No. 1. The acquisition is subject to DLA packaging requirements and technical quality standards as outlined in the DLA Master List, with specific attention to the removal of government identification from non-accepted supplies.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
BOTTLE, SCREW CAP
Solicitation # SPE2DS-26-T-379X
This contract is a solicitation issued by the Department of Defense Medical Supply Chain for the procurement of one case of custom cleaned amber Boston round glass bottles. Each bottle has a one liter capacity and includes a screw cap, with the unit of issue defined as 12 bottles per case. The requirement is identified by NSN 6640-01-688-0898 and is associated with purchase request 7018100725. The delivery timeline is set for five days after the order is placed. Compliance with DLA master lists for technical and quality requirements, specific packaging standards, and the removal of government identification from non-accepted supplies is mandatory. The solicitation, numbered SPE2DS-26-T-379X, falls under NAICS code 339113 and is managed by the Medical Supply Chain MD SURG FSF.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
BANDAGE, ADHESIVE
Solicitation # SPE2DS-26-T-378H
This contract is a solicitation from the Department of Defense Medical Supply Chain for the procurement of sterile adhesive bandages measuring 0.75 by 3 inches in flesh or clear colors. The items consist of sterile dressings attached to plastic adhesive plaster with a two-piece removable facing material. The order is for one package containing 100 units under NSN 6510-00-597-7469, with a required delivery timeframe of 5 days after the order is placed to Camp Pendleton. The product must have a non-extendable shelf life of 36 months, and no more than 5 months may have passed from the date of manufacture to the date of delivery to the government. The contract adheres to DLA packaging requirements and technical quality standards as specified in the DLA Master List. This procurement is categorized under NAICS code 339113 and is managed by the Medical Supply Chain MD SURG FSF.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
APPLICATOR, DISPOSABLE
Solicitation # SPE2DS-26-T-378K
This contract is for the procurement of sterile, disposable applicators consisting of a six-inch wood rod with an absorbent tip. The items are packaged in sets of two per packet, with 100 packets per package, totaling 200 applicators per unit of issue. The product is FDA regulated and must be sourced from approved manufacturers such as Redi Products, Inc. or Medline Industries Inc. Compliance requires adherence to DLA packaging requirements, specifically Medical Marking Standard No. 1, and the prohibition of intentionally added mercury compounds. Delivery is set for 20 days after the order, with shipping terms as FOB Destination. The contract specifies a quantity of one package under NSN 6515-00-564-8242, with inspection and acceptance occurring at the destination point.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
BACKPACK, CASE, CARRYING
Solicitation # SPE2DH-26-T-6314
This contract is a solicitation for a replacement carrying case designed for use with the patient rescue and transport system, specifically accommodating a rolled litter with dimensions of 10 inches in diameter and 36 inches in length. The item is identified by NSN 6530-01-260-6703 and part number SK-202 from Skedco, Inc. The requirement is for one unit to be delivered FOB destination within 20 days after the order is placed. Compliance with DLA packaging and quality requirements is mandatory, including adherence to Medical Marking Standard No. 1 and the removal of government identification from any non-accepted supplies. The item is not an FDA regulated device. All units must be properly sealed in suitable containers to prevent damage during transit, and the contract specifies a zero percent quantity variance for the delivery.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
TOWELETTE, BENZALKONIUM
Solicitation # SPE2DS-26-T-379N
This contract is for the procurement of three packages of alcohol-free benzalkonium chloride impregnated antiseptic cleansing towelettes, identified by NSN 6510-01-483-3333. Each package contains 100 individually wrapped white nonwoven towelettes measuring 8.5 by 5 inches. The order is issued by the Department of Defense Medical Supply Chain and requires delivery within 20 days after receipt of the order to a performance location in FPO 96632. The supplies must have a non-extendable shelf life of 24 months, with a requirement that no more than three months have passed from the date of manufacture to the date of delivery to the government. The contract adheres to DLA master lists for technical and quality requirements, including specific packaging standards and regulations regarding the removal of government identification from non-accepted supplies. Covered Defense Information potentially applies to this acquisition.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
SEALING COMPOUND
Solicitation # SPE8ES-26-T-2671
This contract is for the procurement of black sealing compound, identified by NSN 8030015111245 and part number PR-2201 B1, in 2.5 fluid ounce kits. The agreement specifies a shelf life of six months and requires the product to be stored below 80 degrees Fahrenheit. Delivery is set for 20 days after order, with the destination and inspection point located at Fort Rucker, Alabama. Suppliers must adhere to strict hazardous materials guidelines, including the submission of Safety Data Sheets and compliant labeling in accordance with OSHA and Federal Standard 313-E. Packaging and marking must comply with MIL-STD-129 and DLA packaging requirements, with shipments to be sent via the fastest traceable means. The contract includes specific quality and technical requirements as outlined in the DLA Master List.
Defense Logistics Agency

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
GOGGLES, PROTECTIVE, INF
Solicitation # SPE2DS-26-T-378S
This contract is for the procurement of protective infection goggles designed to shield users from blood and other fluids. The goggles must feature distortion-free lenses, an antiglare brow guard, wrap-around side shields, and a lightweight, anti-fog design. The order consists of one package containing 100 units, with a required delivery timeframe of five days after order. The supplier must adhere to strict commercial packaging and packing standards to ensure the contents are protected from damage during transit. All materials must be marked according to Medical Marking Standard No. 1. This acquisition is managed by the Department of Defense Medical Supply Chain and is subject to the technical and quality requirements outlined in the DLA Master List.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
OVEN, LABORATORY
Solicitation # SPE2DH-26-T-6329
This solicitation, issued by the Department of Defense Medical Supply Chain FSH, is for the procurement of one laboratory oven under solicitation number SPE2DH-26-T-6329. The required equipment must have a maximum temperature of 450 degrees Fahrenheit, a capacity of 0.7 cubic feet, a weight of 31.4 pounds, and a NEMA 5-15P plug. The item is associated with the Petroleum Quality Analysis System and is identified by NSN 6640-01-642-0753. Bidders are required to specify the source and part number being supplied and must adhere to DLA packaging requirements and technical quality standards. The delivery deadline is set for 20 days after the order is placed. The response deadline for this federal acquisition is September 8, 2026, with the place of performance located at FPO 96661.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 333310
New
DIBBS
CAP, LENS
Solicitation # SPE7L7-26-T-5042
This contract is for the procurement of 25 lens caps, identified by NSN 6650017343430 and Dialight Corporation part number 08-0514-203. The agreement, under solicitation number SPE7L7-26-T-5042, specifies a delivery timeframe of 230 days with a required delivery date of April 30, 2027. Shipping is designated as FOB Origin, with the final destination and inspection point located at the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to various technical and quality standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Additionally, the supplier must comply with DLA master lists for technical requirements, including specific protocols for the removal of government identification from non-accepted supplies and the handling of covered defense information.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339115
New
DIBBS
ANTI-REFLECTION DEVICE
Solicitation # SPE7L7-26-Q-2339
This contract, solicitation number SPE7L7-26-Q-2339, is for the procurement of 135 units of an anti-reflection device for optical instruments, identified by NSN 6650-01-586-9997. The agreement is established as a firm fixed price contract with a delivery requirement of 90 days after the order is received. Delivery and acceptance are both set at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements and MIL-STD-129 for marking and labeling, with packaging following ASTM D3951. Quality assurance is governed by specific sampling methods such as MIL-STD-1916 or ASQ H1331, and the contractor must comply with CMMC Level 2 self-assessment and covered defense information regulations. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except in specific functional cases approved by NAVSEA.
Ophthalmic Goods Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332912
New
DIBBS
VALVE, REGULATING, FLUID PRESSURE
Solicitation # SPE7MC-26-T-242U
This contract is for the procurement of two fluid pressure regulating valves, identified by NSN 4820014231922 and part number YB2327G293 from Leslie Controls, Inc. The solicitation, numbered SPE7MC-26-T-242U, specifies a required delivery date of June 7, 2029, with shipping destined for the DLA Distribution New Cumberland facility in Pennsylvania. The terms stipulate FOB Origin and require inspection and acceptance at the destination. The manufacturer must adhere to DLA packaging requirements and MIL-STD-129 marking standards. Special attention is required regarding the use of mercury, which is prohibited unless specifically exempted for functional purposes. Additionally, because the production of these valves may require specific casting or forging tooling that the government does not possess, suppliers are directed to the DLA Casting and Forging Assistance Request process for necessary sourcing and technical information.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BALL
Solicitation # SPE7MC-26-T-244P
This contract is for the procurement of 25 ball valves, identified by NSN 4820014699990 and associated with Parker Hannifin Corporation part numbers 10500 PC 12B and 10578B. The order is designated as a critical application item and must adhere to strict quality and technical requirements, including the prohibition of intentionally added mercury or mercury-containing compounds in accordance with NAVSEA standards. The delivery is set for FOB Origin with a required delivery date of April 21, 2027, and a need ship date of February 16, 2027. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements, with the final destination for shipment being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will take place at the destination.
Industrial Valve Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-26-T-244G
This contract is for the procurement of nine safety relief valves under solicitation SPE7MC-26-T-244G for the Department of Defense. The items are identified by NSN 4820017338593 and are designated as critical application items, with approved part numbers from Allied Systems Company and Parker-Hannifin Corporation. Delivery is required within 217 days, with a need ship date of April 17, 2027, and shipping is set as FOB Origin. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards such as ASTM D3951 and MIL-STD-129. All shipments must be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Additionally, the contract prohibits the use of Class I ozone depleting chemicals in the manufacturing or delivery of the valves, requiring any substitute chemicals to be submitted for official approval.
Industrial Valve Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
ACTUATOR, ELECTRO-ME
Solicitation # SPE7MC-26-T-244K
Industrial Valve Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
FLANGE, GLAND, VALVE
Solicitation # SPE7MC-26-T-176H
Industrial Valve Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
CAP, VALVE
Solicitation # SPE7MC-26-T-244J
Industrial Valve Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
PISTON, VALVE
Solicitation # SPE7MC-26-T-244Q
Industrial Valve Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Material Safety Data and LabelingThis subcontract opportunity, titled Hazardous Material Safety Data and Labeling, is issued by the Department of Defense for the DDSP New Cumberland Facility. The primary objective is to ensure hazardous material labeling compliance and the provision of Safety Data Sheets in accordance with OSHA's Hazard Communication Standard 29 CFR 1910.1200. The work will be performed in New Cumberland, Pennsylvania. The contract is designated as a Total Small Business Set-Aside under FAR 19.5, falling under NAICS code 541690. The solicitation was posted on August 30, 2026, with a response deadline of September 10, 2026.
Other Scientific and Technical Consulting Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging, Preservation, and MarkingThis subcontract opportunity with the Department of Defense, specifically the DDSP New Cumberland Facility, requires the full packaging, preservation, and marking of valves. The contractor must adhere to strict military standards, including MIL-STD-2073-1E, RP001, and MIL-STD-129, utilizing approved containers along with desiccants and volatile corrosion inhibitors. The project is designated as a Total Small Business Set-Aside under NAICS code 493190 and will be performed in New Cumberland, Pennsylvania. Interested parties must submit their responses by September 10, 2026.
Other Warehousing and Storage

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
Item Unique Identification (IUID) Marking and Data SubmissionThis subcontract for the Department of Defense DDSP New Cumberland Facility involves the application of permanent Item Unique Identification markings, such as Data Matrix codes, in accordance with MIL-STD-130. The selected provider is responsible for submitting all required registration data to the government through the Wide Area Workflow system. The opportunity is a total small business set-aside under NAICS code 332999, with performance taking place in New Cumberland, Pennsylvania. Interested parties must submit their responses by September 10, 2026, following the posting date of August 30, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details