This Government Contract opportunity from Department Of Defense was posted on July 21, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Disposable Sterile Cotton-Tipped Applicator Supply

Closed

Federal

Submission Closed07/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE4A7-26-R-XB00

This solicitation, issued by the Department of Defense through the ASC Supplier OE and AF Division, is for the procurement of an auxiliary boot assembly, identified by NSN 1650-01-132-0794. The requirement is structured as an Indefinite Delivery Contract with a five year base period and a total contract value not to exceed 350,000 dollars. The estimated annual demand is 160 units, with delivery orders ranging from a minimum of 40 to a maximum of 160 units, and a required delivery timeframe of 125 days after receipt of order. This opportunity is designated as a total small business set aside. The contract is subject to stringent technical and quality standards, including CMMC Level 2 certification and adherence to the DLA master list of technical and quality requirements. Strict export controls apply under ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export control training to access technical data. Additional requirements include specific DLA packaging standards, inspection and acceptance at origin, and compliance with MIL-STD-1916 for sampling and MIL-STD-129 for marking. Quotes for this solicitation are due by September 18, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Manufacture and Supply of Foam-Filled Marine Fenders

POSTED

DEADLINE

54--TANK,LIQUID STORAGE

Solicitation # SPE8ED-26-T-1391

Solicitation SPE8ED-26-T-1391 is a Request for Quotations issued by DLA Troop Support, Construction and Equipment Containers, for the procurement of two liquid storage tanks. The required tanks must have a 5 gallon capacity with dimensions of 10 3/4 inch ID by 14 11/16 inch L, identified by NSN 5430-01-486-2869. Delivery is required within 20 days after receipt of order to the USS MAHAN DDG 72, with the FOB point designated as origin. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-1. Quotes must be submitted electronically via the DLA Internet Bid Board System by September 21, 2026. The procurement falls under NAICS code 326299 and may be eligible for automated award. Compliance with the Buy American Act, the Berry Amendment, and specific cybersecurity standards, including NIST SP 800-171 and DFARS 252.204-7012, is required. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, and all invoicing must be processed through the Wide Area WorkFlow system. Additive manufacturing is prohibited unless specifically authorized.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

USCG Base Miami Beach Replacement Fenders

Solicitation # 31020PR260000231

The United States Coast Guard Base Miami Beach Facilities Engineering division is soliciting quotations for a firm-fixed-price contract to procure three high-performance, foam-filled marine fenders. These fenders must have a nominal diameter of 5 feet and a length of 8 feet, featuring a 100 percent closed-cell foam core and a minimum 1.0 inch reinforced elastomeric polyurethane skin in non-marking marine black. A critical requirement is that all internal tension components, swivel end fittings, and bow or anchor shackles be constructed exclusively from Type 316 stainless steel to withstand harsh saltwater environments. The procurement includes the delivery of the fenders, technical data submittals, and logistics, with all items delivered FOB Destination to Base Miami Beach. The solicitation is a 100 percent total small business set-aside under NAICS code 326299. Award will be based on the best value, defined as the lowest evaluated price among technically acceptable offerors. Technical acceptability is contingent upon meeting specific performance ratings, including a minimum energy absorption of 136 ft-kip and a maximum reaction force of 101 kip. Additionally, the manufacturer must maintain an active ISO 9001 certification and provide certified mill test reports for all stainless steel hardware. Fabrication cannot begin until the Contracting Officer Representative provides written approval of all technical submittals, which are due within 15 calendar days of the award.

POSTED

DEADLINE

54--TANK,LIQUID STORAGE

Solicitation # SPE8ED-26-Q-0682

Solicitation SPE8ED-26-Q-0682 is a request for quotations issued by DLA Troop Support Construction and Equipment Containers for the procurement of 23 liquid storage tanks, identified by NSN 5430-01-696-1376. This is a total small business set-aside under NAICS code 326299. The required delivery date is 140 days after the award, with the destination for shipment and inspection being DLA Dist San Joaquin in Tracy, California. The procurement is conducted under the First Destination Transportation program, and quotes must be submitted electronically via the DIBBS system by September 21, 2026. The items are source-controlled and must be manufactured and tested according to limited rights data, requiring a Certificate of Quality Compliance. Packaging must adhere to MIL-STD-129 and RP001, with non-hazardous materials following ASTM D3951 and hazardous materials following TQ requirement IP025. Contractors are required to use the Wide Area WorkFlow system for invoicing and receiving reports. Compliance requirements include CMMC Level 2 certification, ITAR/EAR export controls, and adherence to DFARS 252.204-7012 regarding the safeguarding of covered defense information. Quotations must remain valid for 90 days from the date specified in the solicitation.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Custom PVC Police Placards and Flags Supply

Orlando Police Department

POSTED

DEADLINE

Nonmetallic Hose Assembly Supply (NSN 4720014467715)

FLUID HANDLING DIVISION

POSTED

DEADLINE

MIL-SPEC Waterproof Packaging for Rubber Components

FLUID HANDLING DIVISION

POSTED

DEADLINE

Synthetic Rubber O-Ring Supply (NSN 5331002882378)

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Cork and Rubber Sheet (NSN 5330-01-287-0495)

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Universal Joint Yokes (NSN 2520-00-289-7180)

LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

DEADLINE

Supply of Nonmetallic Hose Assemblies (NSN 4720014966446)

FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 9 days

AI Contract Overview

The contract is for the manufacture and supply of sterile, disposable cotton-tipped applicators with wood shafts measuring 5/64 inch in diameter and six inches in length, each individually wrapped and delivered FOB destination within 20 days of order placement. The specification requires strict adherence to sterility and packaging standards to ensure medical-grade usability. Delivery must be completed at the designated place of performance in Johnston, Iowa, with a ZIP code of 50131-1824, and the supplier must meet the tight timeline to support operational medical needs. This subcontract, classified under NAICS code 326299 and issued by the Department of Defense through the MEDICAL SUPPLY CHAIN MD SURG FSF, was posted on July 21, 2026, with a response deadline of July 27, 2026. The solicitation number SPE2DS26T257G is available through the DIBBS platform, and while no set-aside designation is specified, the requirement is clearly targeted toward qualified manufacturers capable of producing high-volume, sterile medical disposables under tight delivery windows. All offerings must comply with the stated technical and logistical parameters without deviation.

General Info

Manufacture and supply sterile cotton-tipped applicators with wood shafts, FOB destination, Johnston, Iowa, delivered within 20 days.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

326299 - All Other Rubber Product ManufacturingView NAICS

Place of Performance

JOHNSTON, IA, 50131-1824, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE2DS-26-T-257G.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

APPLICATOR, DISPOSABLE

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJul 21

subcontract

Response DeadlineJul 27

Deadline has passed

Submission Closed

07/27/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Manufacture and supply of sterile, disposable cotton-tipped applicators with wood shafts (5/64" diameter, 6" length), individually wrapped and delivered FOB destination within 20 days of order.