Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

DISPOSAL CONTAINER, HYP

Active
SPE2DH-26-T-5713Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a puncture-resistant, autoclavable, red plastic disposal container designed for single-use hypodermic needles and syringes, with a nominal capacity of 3.3 quarts and featuring a one-way valve and venting system, clearly labeled with the infectious waste symbol and cautionary legends. Each unit must be commercially packaged in a sealed inner container to prevent damage or breakage and shipped in suitable exterior containers that ensure safe, cost-effective delivery via common carrier to the designated destination, adhering to the Medical Marking Standard No. 1, which replaces all references to MIL-STD-129. The packaging and marking requirements are strictly defined, and the item must be labeled in compliance with these standards, with guidance accessible through DLA Troop Support. The unit of issue is one PG, equivalent to 24 units, and the item is identified by NSN 6530-01-188-5345 and manufacturer part number 305488 from Becton, Dickinson and Co. Delivery is required within 20 days FOB destination, with no quantity variance permitted, and inspection and acceptance occur upon arrival. The product is regulated by the FDA, and buyers must submit a referral through EBS for confirmation prior to award. The sourcing is governed by DLA packaging requirements and technical standards outlined in the DLA Master List of Technical and Quality Requirements, and the contract is governed by covered defense information protocols. The delivery point is Fort Hood, Texas, with the point of contact for inquiries being Tina Vu of the Department of Defense Medical Supply Chain FSH.

General Info

Procure 24 autoclavable red sharps containers with valve, labeled, FOB Fort Hood, FDA-regulated, NSN 6530-01-188-5345, delivery in 20 days.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

423450 - Medical, Dental, and Hospital Equipment and Supplies Merchant WholesalersView NAICS

Place of Performance

BLDG 4925 SANTA FE AVE, FORT HOOD, TX, 76544, US

Set-Aside

NONE

Documents

(1)

SPE2DH-26-T-5713.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DISPOSAL CONTAINER,HYPODERMIC NEEDLE AND
DISPOSAL CONTAINER<(>,<)> HYPODERMIC NEEDLE AND SYRINGE
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
U/I=PG (PG OF 24) CAPACITY RATING: 3.3 QUARTS NOMINAL OUTER CONTAINER MATERIAL: PLASTIC SPECIAL FEATURES: AUTOCLAVABLE; RED; PUNCTURE-RESISTANT; ONE WAY VALVE; VENTED; W/INFECTIONS WASTE SYMBOL AND LEGENDS<(>,<)> CAUTION AND INFECTIONS WASTE.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
1 PG = 24 EA
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description.
SPE2DH-26-T-5713
SECTION B
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
BECTON, DICKINSON AND CO 06531 P/N 305488
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017693089 0001 PG 1.000
NSN/MATERIAL:6530011885345
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
SPECIAL NSN/Part Number: 6530-01-188-5345 Quantity: 1 PG Purchase Request: 7017693089QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 423450
New
DIBBS
OMEPRAZOLE EXTENDED-RE
Solicitation # SPE2DP-26-T-4416
The contract specifies the procurement of 20 mg extended-release omeprazole capsules in 90-count bottles, identified by NSN 6505016247068 and manufacturer part number NDC00781-2868-92 from Sandoz Inc. Each unit must be packaged in commercial-grade sealed containers that protect against damage, with outer shipping containers ensuring safe, low-cost delivery to listed government destinations under FOB destination terms. A minimum of 21 months of shelf life must remain at delivery, with a total shelf life of 24 months that is non-extendable. All packaging, labeling, and marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and palletization must adhere to DLA Packaging Requirements for Procurement. The product is regulated by the FDA and requires pre-award referral for confirmation. Shipments must use traceable transportation methods and explicitly prohibit parcel post. Deliveries are scheduled across multiple CLINs totaling 57 units, with a mandatory delivery window of five days and no variance allowed in quantity. All items must be labeled and stored at controlled room temperature, with packaging materials and methods governed by DLA’s Master List of Technical and Quality Requirements, which take precedence over ASTM D3951. Shipping addresses include military facilities at Fort Bragg, North Carolina, and APO AP, with required point-of-contact and program tracking information provided for government use.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
SURGICAL PACK, DISPOSAB
Solicitation # SPE2DH-26-T-5695
The contract specifies the procurement of a disposable surgical pack containing one drape towel with adhesive, one lithotomy sheet with attached legging, two absorbent towels, and one reinforced plastic outer wrap or table cover measuring 44 inches by 90 inches, all packaged as a unit of issue consisting of ten each per package. Two such packages are required under purchase request 7017656189 for delivery within 20 days of award. All packaging must comply with commercial standards as outlined in the procurement document, with each unit sealed in a container that safeguards contents from damage and breakage, and shipped in robust exterior containers suitable for safe delivery by common carriers at the lowest possible rate to the specified delivery point in APO, 09094-3219. Marking must adhere strictly to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard are available through DLA Troop Support or online. The solicitation is governed by DLA Packaging Requirements and incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date. This is a federal solicitation under NAICS code 423450 issued by the Department of Defense’s Medical Supply Chain FSH, with responses due by August 10, 2026, and technical inquiries directed to Tina Vu.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
SODIUM CHLORIDE INJ
Solicitation # SPE2DP-26-T-4446
Sodium Chloride Injection in 10 mL disposable syringes, preservative-free and latex-free, is being procured under contract SPE2DP-26-T-4446 with a total quantity of 2 packing groups, each containing 30 syringes for a total of 60 units. The product is regulated by the FDA and must comply with all applicable DLA Master List of Technical and Quality Requirements, including medical packaging and marking standards as defined in Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must be commercial grade, sealed to prevent damage or breakage, and placed in exterior shipping containers suitable for safe transport at the lowest carrier rate to the designated delivery point. The item has a non-extendable shelf life of 24 months and must be labeled accordingly. Delivery is FOB destination within 20 days of award, with no tolerance for quantity variance. Freight must be shipped by traceable means, excluding parcel post, to the specified delivery location at Watervliet Arsenal, New York. The supplier, AmerisourceBergen Drug Corp with part number 106346, must adhere to all applicable hazardous material guidelines under Fed-Std-313 and ASTM D3951 where relevant, though DLA requirements override any conflicting standards. All packaging, labeling, and palletization must conform to RP001 and the latest DLA packaging directives.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
TABLE, SURGICAL INST
Solicitation # SPE2DH-26-T-5733
The contract specifies the procurement of two surgical anesthesia utility tables, each with a single drawer made of stainless steel, rectangular in shape, measuring 20 inches in width, 16 inches in depth, and 34 inches in height, equipped with 3-inch wheel casters. These units are destined for federal medical use under the NSN 6530-00-710-0220 and must be delivered within 170 days of award. Packaging requirements are strictly defined: each unit must be sealed in a commercial container that prevents damage or breakage, with exterior shipping containers compliant with commercial standards and capable of safe transport at the lowest cost to the delivery point in New Cumberland, PA. All items must be labeled in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bidders must clearly indicate the source and part number being supplied. The contract references DLA’s Master List of Technical and Quality Requirements, indicating adherence to specific technical and quality criteria identified by R or I numbers, and incorporates DLA’s packaging guidelines. Government identification must be removed from non-accepted supplies, and all bids must respond to the solicitation number SPE2DH-26-T-5733 with full compliance to the stated procurement rules and deadlines.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
TOLNAFTATE CREAM
Solicitation # SPE2DP-26-T-4443
Tolnaftate Cream USP, a 1% weight/weight topical antifungal cream, is being procured in 15-gram tubes (TU), with a total quantity of 18 tubes required for delivery. The product has a 36-month shelf life, and at the time of receipt by the first government activity, a minimum of 31 months of remaining shelf life must be guaranteed. It must be stored at controlled room temperature between 20–25°C (68–77°F), with allowable excursions permitted between 15–30°C (59–86°F) in accordance with USP standards. The manufacturer is Taro Pharmaceuticals U.S.A., Inc., identified by NDC 51672-2020-01, and the item is regulated by the FDA, requiring confirmation through the EBS referral process. Packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and must be commercially packaged in sealed unit containers suitable for protection against damage, with exterior shipping containers ensuring safe, cost-effective delivery. All packaging and labeling must adhere to DLA’s Master List of Technical and Quality Requirements, which take precedence over ASTM D3951. The product is not considered hazardous under FED-STD-313 and must be shipped via the fastest traceable means, excluding parcel post, to Fort Lewis, WA, with a required delivery within five days of the award. The contract specifies zero variance in quantity, destination FOB delivery, and inspection and acceptance at the delivery point. The NSN is 6505-01-571-5622, and the solicitation number is SPE2DP-26-T-4443, with a response deadline of August 10, 2026.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
BAG, STERILIZATION-BIOH
Solicitation # SPE2DH-26-T-5714
The contract specifies the procurement of heavy-duty, puncture-resistant biohazard disposal bags colored red or orange to indicate contamination, designed for autoclaving biologically contaminated materials such as culture dishes prior to disposal. Each package contains 200 units, with the unit of issue listed as a package. The items must comply with stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, and packaging must adhere to commercial standards as specified in the procurement document, superseding MIL-STD-129 in favor of Medical Marking Standard No. 1. Each unit must be sealed in a container that prevents damage or breakage, and shipments must be packed in commercial exterior containers capable of safe delivery via common carriers at the lowest cost to the designated delivery point. Marking must follow Medical Marking Standard No. 1, and all packaging and handling must meet MIL-STD-2073-1E specifications. The contract calls for delivery of one package within 20 days FOB destination, with no tolerance for quantity variance, and inspection and acceptance occurring at the delivery point. The solicitation number is SPE2DH-26-T-5714, issued by the Department of Defense’s Medical Supply Chain FSH, with a response deadline of August 10, 2026, and an original required delivery date of August 4, 2026.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
METER, CONDUCTIVITY
Solicitation # SPE2DH-26-T-5700
A portable conductivity meter with solid-state construction and built-in electrodes is being procured under solicitation SPE2DH-26-T-5700, with a requirement for three units. The device measures 3 inches wide, 5 inches in diameter, and 4 inches high, and includes a carrying case for transport and field use. It is designed for testing water purified through deionization, osmosis, boiler systems, and highly saline wastewater. The procurement is governed by technical and quality requirements from the DLA Master List, with applicable revisions determined by the solicitation issue date or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The unit of issue is each, and bidders must clearly identify the source and part number being offered. The NSN is 6630-01-188-5368, with a delivery deadline of 20 days after award. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026. The contracting activity falls under the Department of Defense, Medical Supply Chain FSH, with performance to be delivered to FPO, ZIP 96678, and primary point of contact is Tina Vu via email and phone provided.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
SHORTS, EXAM
Solicitation # SPE2DH-26-T-5726
The contract is for disposable, latex-free exam shorts in dark blue, made from non-woven material with a sewn-in elastic waistband that expands from 22 to 48 inches to accommodate most patients. Each unit is sold in a package of 50, with the unit of issue defined as one package. All packaging must comply with commercial standards and meet the Medical Marking Standard No. 1, which replaces MIL-STD-129, ensuring proper identification and handling throughout the supply chain. Units must be sealed in protective containers and packed in suitable exterior shipping containers to ensure safe delivery at the lowest carrier rate to the designated point of performance at Edwards AFB, California. The material must be marked according to MMS No. 1, and full compliance with DLA packaging requirements is mandatory. This acquisition falls under the NAICS code 423450 and is managed by the Department of Defense’s Medical Supply Chain FSH, with the solicitation number SPE2DH-26-T-5726, issued on August 2, 2026, and requiring responses by August 10, 2026. Delivery is due within 20 days after award, and the item is identified by NSN 6532-01-532-8007. Technical and quality requirements are governed by the DLA Master List, and removal of government identification from non-accepted supplies is regulated under RQ011. Contact for inquiries is Tina Vu at Tina.Vu@dla.mil.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
TRIAMCINOLONE ACETO
Solicitation # SPE2DP-26-T-4442
Triamcinolone acetonide cream USP 0.1% is a prescription-only topical medication supplied in 80-gram tubes, with a total shelf life of 36 months and a requirement that at least 31 months of shelf life remain upon receipt by the first government activity. It must be stored at controlled room temperature between 20–25°C (68–77°F), with allowable excursions between 15–30°C (59–86°F) in accordance with USP standards. The product is subject to stringent FDA regulation and must comply with all DLA Master List of Technical and Quality Requirements, including packaging and labeling standards per Medical Marking Standard No. 1, which replaces MIL-STD-129. Each unit must be commercially packaged in sealed containers to prevent damage, and bulk shipments must be palletized per DLA procurement guidelines. The item is regulated as a Type I (Code Q) drug with a non-extendable 36-month shelf life, and all packaging must be marked in accordance with applicable defense information and hazardous material requirements if applicable. The contract specifies delivery of 16 tubes to Fort Lewis, Washington, with a required delivery date of August 4, 2026, within five days of shipment, using the fastest traceable means excluding parcel post. Supplier information includes NDC codes for Sandoz, Tarro Pharmaceuticals, and AmerisourceBergen, and the unit of issue is a tube (TU). Pricing is fixed at $16.00 per tube with zero variance allowed in quantity.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
Supply of Tuberculin (PPD) for Tuberculosis Testing
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 423450
New
International
Supply of Sickle Cell Diagnostic ReagentsThe contract encompasses the procurement and delivery of specialized medical reagents required for sickle cell disease testing at the Sickle Cell Laboratory in Mandeville, Jamaica. The scope includes full packaging and labeling of reagents in compliance with established diagnostic standards to ensure accuracy, safety, and regulatory adherence in clinical testing environments. All materials must be suitable for routine use in a laboratory setting and meet the technical and quality benchmarks necessary for reliable diagnosis of sickle cell conditions. The supplier is responsible for end-to-end fulfillment including transportation and documentation to guarantee timely and defect-free delivery. The contract is classified as a subcontract under NAICS code 423450, indicating it relates to medical and dental equipment and supplies merchant wholesaling. It is issued by the Southern Regional Health Authority, operating under the Government of Jamaica, with performance required exclusively at the designated laboratory in Mandeville. The posting date indicates this opportunity was made public in July 2026, though no solicitation number is listed. There is no set-aside designation or details provided regarding eligibility criteria or point of contact, and the agreement underscores the importance of reliability and regulatory compliance in supporting national public health initiatives for sickle cell disease screening and management.
Southern Regional Health Authority

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 423450
New
DIBBS
OMEPRAZOLE EXTENDED-RE
Solicitation # SPE2DP-26-T-4251
OMEPRAZOLE EXTENDED-RELEASE CAPSULES, 20 MG DELAYED RELEASE, in 90-count bottles, are being procured under solicitation SPE2DP-26-T-4251 by the Department of Defense’s Medical Supply Chain Pharm FSA. The item is regulated by the FDA and must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over all other packaging standards. Each unit is defined by the unit of issue “BT,” representing 90 capsules per bottle, with all deliveries required to have at least 21 months of remaining shelf life out of a 24-month total shelf life, non-extendable. Packaging must protect against damage and be commercially sealed, with exterior shipping containers suitable for safe transport via common carrier at lowest cost. Palletization must adhere to RP001 DLA Packaging Requirements, and all labeling and marking must follow MIL-STD-129 as the governing standard, superseding references to MIL-STD-129. Markings must include Unit of Issue, Quantity per Unit Pack, freight and mark-for addresses, and traceable identifiers. Parcel post is explicitly prohibited, and shipments must be sent via the fastest traceable means. All items are to be delivered FOB destination within five days of award, with delivery points at Fort Stewart, GA, and Fort Campbell, KY. The contract includes five CLINs totaling 15 BT (1,350 capsules), with no variance allowed in quantity. The drug is supplied by Sandoz Inc., with NDC 00781-2868-92. Technical compliance is enforced through the DLA Master List, which governs all quality and packaging specifications. The product is non-hazardous under FED-STD-313 and must conform to ASTM D3951 for commercial packaging, unless a deviation applies, in which case TQ IP025 governs. All contractors must comply with FAR/DFARS clauses requiring cybersecurity protections under 252.204-7012 and NIST SP 800-171, safeguarding covered defense information and reporting cyber incidents. Contractors must also adhere to whistleblower protections, trafficking in persons prohibitions, employment verification requirements, and sustainable product preferences. Proposal submissions are exclusively through the DLA Internet Bid Board System (DIBBS) by the deadline of July 29, 20
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

2 days ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 339114
New
DIBBS
FILE, ENDODONTIC, HAND
Solicitation # SPE2DH-26-T-5706
These endodontic hand files are precision dental instruments with a square cross-sectional design, optimized for root canal cleaning, unclogging, and shaping procedures. Manufactured from premium stainless steel, they are engineered for durability, resistance to fracture, and high cutting efficiency, ensuring reliable performance during clinical use. The instruments feature color-coded plastic handles with grooves and an ergonomic shape to enhance tactile feedback and provide a secure, comfortable grip for dental professionals. Each unit is packaged as a set of six, with the specified NSN 6520-01-718-4102 and a quantity of four packages required under purchase request 7017638333. A shelf-life restriction of 12 months applies and is non-extendable, with packaging and supply requirements governed by DLA standards including the removal of government identification from non-accepted items. The solicitation, issued by the Department of Defense under contract SPE2DH-26-T-5706, mandates supplier information including source and part number, with bids due by August 10, 2026, and delivery required within five days of award to Suffolk, Virginia. The items are subject to defense information protocols and technical quality standards as referenced in the DLA Master List.
Dental Equipment and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339920
New
DIBBS
FILTER SET, RADIOGRAPHI
Solicitation # SPE2DH-26-T-5711
The contract specifies the procurement of one filter set for radiographic use, part number 9703045-00, supplied by RTI Electronics, Inc. with CAGE code 46PM4, under the NSN 6525-01-606-9939. The item is intended for medical applications and must comply with stringent packaging and marking requirements outlined in Medical Marking Standard No. 1, which supersedes all references to MIL-STD-129. Each unit must be sealed in a protective container to prevent damage during transit and packed within commercial shipping containers suitable for safe and cost-effective delivery via common carrier to the destination point. Packaging must adhere to DLA’s procurement requirements and the specified commercial standards for medical acquisitions, with no use of military packaging standards unless explicitly overridden. Delivery is required within 20 days FOB destination, with zero tolerance for quantity variance, and inspection and acceptance occur at the delivery point. The contract references technical and quality requirements from the DLA Master List, and the item is subject to provisions regarding covered defense information. The solicitation number is SPE2DH-26-T-5711, with a response deadline of August 10, 2026, and a required delivery date of August 4, 2026. The point of contact for inquiries is Tina Vu with the Medical Supply Chain FSH.
Sporting and Athletic Goods Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
CASSETTE, FILTER
Solicitation # SPE2DH-26-T-5704
The contract is for a single unit of a cassette filter with a 5.0 micron rating, 25mm disk size, identified by NSN 6640-01-492-5120, under solicitation SPE2DH-26-T-5704. The item must be supplied in compliance with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date. Packaging must adhere to DLA packaging standards and the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and each unit must be sealed in a suitable container to prevent damage during transit. Shipments must be placed in commercial exterior containers capable of safe delivery via common carrier at the lowest cost to the designated delivery point in Tampa, Florida. Bidders are required to specify the source and part number being offered, and all items must be marked in accordance with the Medical Marking Standard. The contract includes provisions for the removal of government identification from non-accepted supplies and potential application of covered defense information standards. Delivery is required within five days of award, and responses are due by August 10, 2026. The purchasing office is part of the Department of Defense, Medical Supply Chain FSH, with point of contact Tina Vu available for inquiries.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
BUFFER SOLUTION, STA
Solicitation # SPE2DH-26-T-5688
The contract specifies the procurement of 30 packets of buffer solution powder, comprising 15 red packets for pH 4.01 and 15 yellow packets for pH 7.00, packaged in plastic cases for medical use. Each unit must be sealed in a suitable container to prevent damage or breakage and shipped in commercial exterior containers that ensure safe delivery at the lowest cost to the designated point. All packaging and marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and labels must clearly display the date of manufacture, expiration or retest date, and the contract or lot number. The item has a non-extendable shelf life of 24 months, and no more than three months may have passed from manufacture to government delivery. The NSN is 6630-01-494-3676, and the contract number is SPE2DH-26-T-5688, with a 20-day delivery requirement. Bidders must provide the source and part number being supplied, and the procurement falls under DLA packaging and quality requirements, including compliance with the DLA Master List of Technical and Quality Requirements. Covered defense information may apply, and government identification must be removed from non-accepted supplies as per applicable standards.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
SHAVING KIT, HOSPITAL P
Solicitation # SPE2DH-26-T-5732
The contract is for the procurement of hospital patient shaving kits, each containing one disposable razor and one tube of shaving cream, packaged in units of 25 kits per pack (PG). The kits are intended for patient personal care in hospital settings and must comply with DLA’s packaging and marking standards, specifically Medical Marking Standard No. 1, which replaces MIL-STD-129. Each kit must be sealed in a protective unit container and packed in commercial exterior shipping containers suitable for safe delivery via common carrier at the lowest cost to the designated destination. The items are identified by NSN 6530-01-354-1156 and manufacturer part number DYKD2001S from MEDLINE INDUSTRIES, LP. Delivery is required within five days FOB destination with no variance allowed in quantity, and inspection and acceptance occur at the point of delivery. The contract is subject to DLA’s technical and quality requirements referenced from the Master List, and all material must be marked and packaged in accordance with specified defense and medical standards. The solicitation number is SPE2DH-26-T-5732, with a response deadline of August 10, 2026, and the place of performance is Travis AFB, CA. The federal agency managing the acquisition is the Department of Defense through the Medical Supply Chain FSH, with Tina Vu as the primary point of contact.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334510
New
DIBBS
ANALYZER, BLOOD CHOLEST
Solicitation # SPE2DH-26-T-5680
The contract is for the procurement of four kits of the Accutrend Plus blood cholesterol analyzer, a portable, lightweight device designed for reliable cholesterol testing without the need for fasting, refrigeration, or capillary tubes. The meter features a larger, easy-to-read display, ergonomic design for convenient handling, built-in self-testing and safety features that reduce contamination risk by allowing blood application outside the device, and operational capability in ambient temperatures between 64°F and 95°F, making it suitable for both clinical and field use. Each kit includes the meter, user manual, reference card, troubleshooting guide, four AAA batteries, and a protective case. The product is commercial off-the-shelf medical equipment, packaged and marked in compliance with Medical Marking Standard No. 1, superseding MIL-STD-129, and shipped in commercial containers ensuring safe delivery at the lowest freight cost to Fort Hood, Texas, with a 20-day delivery requirement. The acquisition is conducted under solicitation SPE2DH-26-T-5680 issued by the Department of Defense’s Medical Supply Chain FSH, with technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, and packaging standards enforced per RP001 and RQ011. The NSN 6630-01-689-9343 identifies the item, and the contract fall under NAICS code 334510 for medical equipment manufacturing. All supplies must be free of government identification if not accepted, and the point of contact for inquiries is Tina Vu, with full documentation available through the DLA eProcurement portal. The solicitation closed on August 10, 2026, and the purchase request is numbered 7017684185, with delivery specified for ADO.
Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334515
New
DIBBS
WATER SAMPLING TEST RE
Solicitation # SPE2DH-26-T-5687
The contract specifies the procurement of Monochloramine Reagent Powder Pillows, identified by NSN 6630-01-606-5361, with a unit of issue being a package containing 100 pills per pallet. The item is classified as a Type I hazardous material with a non-extendable shelf life of 12 months, requiring that no more than two months have elapsed from the date of manufacture to the date of delivery to the government. All packaging and labeling must strictly adhere to MMS1D standards, including clear markings for the date of manufacture, expiration or retest date, and the contract or lot number. Compliance with hazardous materials regulations under 49 CFR and ICAO standards is mandatory, and a current Material Safety Data Sheet (MSDS) must accompany each shipment and be submitted electronically to DLA.MSDS@DLA.MIL with the required cover sheet. The item is subject to DLA packaging requirements and the removal of government identification from non-accepted supplies. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. The solicitation, issued under SPE2DH-26-T-5687, has a response deadline of August 10, 2026, and requires delivery within 20 days of award, with the placing organization being the Department of Defense’s Medical Supply Chain FSH.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339114
New
DIBBS
RUBBER DAM
Solicitation # SPE2DH-26-T-5723
The contract specifies the procurement of 15 sheets of a non-latex rubber dam measuring 6 x 6 inches, identified by the NSN 6520-01-717-7806, with a teal green color and regular medium thickness, packaged as a single unit of issue. The item is intended for medical use and must comply with technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the scale of the acquisition. Packaging must meet DLA procurement standards, and any non-accepted supplies must have government identification removed prior to return. Bidders are required to clearly state the source and part number being submitted. The solicitation, issued under SPE2DH-26-T-5723 on August 2, 2026, with a response deadline of August 10, 2026, is managed by the Department of Defense’s Medical Supply Chain FSH, with performance delivery to APO 09094-3219 within 20 days of award. Primary point of contact is Tina Vu via email and phone provided. Covered defense information may apply, and the NAICS code 339114 denotes classification under dental and orthopedic appliances manufacturing.
Dental Equipment and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
GOWN, OPERATING, SURG
Solicitation # SPE2DH-26-T-5694
The contract is for the procurement of adult surgical gowns in X-large, extra-long size with an A-line design, full back, full length, waist tie, long raglan sleeves, and white elastic cuffs, all in blue, sterile, disposable, and fluid-resistant, constructed from plastic polypropylene SMS material meeting AAMI Level 4 standards. Each gown is accompanied by a hand towel, and the unit of issue is a case containing sixteen gowns. The product must have a shelf life of 60 months, with no more than nine months elapsed from the date of manufacture to the date of delivery to the government. Packaging and technical requirements are governed by DLA standards, including compliance with the DLA Master List of Technical and Quality Requirements referenced under RP001, RA001, and RQ011, which dictate packaging, quality controls, and the removal of government identification from non-accepted supplies. The item is identified by NSN 6532-01-730-7599 with a total quantity of eight cases required under purchase request 7017405710, with delivery due within twenty days after award. The solicitation, issued under SPE2DH-26-T-5694, was posted on August 2, 2026, with responses due by August 10, 2026, and is targeted for performance at Fort Detrick, Maryland, under the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
ROOT CANAL PREPARATION
Solicitation # SPE2DH-26-T-5699
This contract pertains to the procurement of a Root Canal Preparation Syringe Kit, which includes five 3cc syringes and fifty application tips, formulated with a specialized water-soluble base containing glycol, urea peroxide, and EDTA to effectively remove calcifications and lubricate root canals for improved instrumentation efficiency. Each kit is the unit of issue, and the item is identified by NSN 6520-01-674-0176 with a procurement quantity of four kits. The item has a non-extendable shelf life of 24 months and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements under identification codes RS016, RA001, RD003, RP001, and RQ011. Hazardous materials regulations apply, requiring a current Material Safety Data Sheet (MSDS) to be submitted electronically to DLA.MSDS@DLA.MIL with cover sheet P-75 and to physically accompany each shipment, packaged in accordance with SPE2DH-26-T-5699, 49 CFR, and ICAO standards. The solicitation issued on August 2, 2026, with a response deadline of August 10, 2026, is under the NAICS code 339112, managed by the Department of Defense’s Medical Supply Chain FSH office, with performance delivery required in Suffolk, Virginia, within five days of award, and primary point of contact is Tina Vu.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details