Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

DISPOSAL CONTAINER, HYP

Active
SPE2DH-26-T-5863Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a disposal container designed for used hypodermic needles and syringes, identified by NSN 6530-01-188-5345 and manufacturer part number 305488 from Becton, Dickinson and Co. Each unit has a nominal capacity of 3.3 quarts, is constructed of puncture-resistant plastic, and features a one-way valve, venting, autoclavability, and a red color with clear infectious waste symbols and caution legends. Packaging must comply with Medical Marking Standard No. 1, replacing all prior references to MIL-STD-129, and each unit must be sealed in a protective container that prevents damage during transit. Shipping must use commercial exterior containers suitable for safe delivery via common carrier at the lowest cost, with delivery required FOB destination within 20 days. The item is regulated by the FDA and requires a referral to a product specialist via EBS prior to award, including bidder and manufacturer details. The unit of issue is PG, where one PG equals 24 units, and the order quantity is one PG. All packaging and marking adhere to MIL-STD-2073-1E, and the contract includes DLA packaging requirements and technical quality specifications referenced from the DLA Master List. Covered defense information may apply, and the solicitation number is SPE2DH-26-T-5863 with a response deadline of August 17, 2026.

General Info

Procure 24 red puncture-resistant needle disposal containers with FDA-regulated specs, FOB destination, DLA packaging, by August 17, 2026.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

423450 - Medical, Dental, and Hospital Equipment and Supplies Merchant WholesalersView NAICS

Place of Performance

85 WEST END AVE, BINGHAMTON, NY, 13905-3855, US

Set-Aside

NONE

Documents

(1)

SPE2DH-26-T-5863.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DISPOSAL CONTAINER,HYPODERMIC NEEDLE AND
DISPOSAL CONTAINER<(>,<)> HYPODERMIC NEEDLE AND SYRINGE
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
U/I=PG (PG OF 24) CAPACITY RATING: 3.3 QUARTS NOMINAL OUTER CONTAINER MATERIAL: PLASTIC SPECIAL FEATURES: AUTOCLAVABLE; RED; PUNCTURE-RESISTANT; ONE WAY VALVE; VENTED; W/INFECTIONS WASTE SYMBOL AND LEGENDS<(>,<)> CAUTION AND INFECTIONS WASTE.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
1 PG = 24 EA
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description.
SPE2DH-26-T-5863
SECTION B
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
BECTON, DICKINSON AND CO 06531 P/N 305488
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017773058 0001 PG 1.000
NSN/MATERIAL:6530011885345
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
SPECIAL NSN/Part Number: 6530-01-188-5345 Quantity: 1 PG Purchase Request: 7017773058QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 423450
New
DIBBS
SODA LIME
Solicitation # SPE2DP-26-T-4569
Soda Lime in pellet form, 5 liters per unit, is procured under solicitation SPE2DP-26-T-4569 for use with device 6515-01-564-6213 and is regulated by the FDA. The contract specifies delivery of five units, each packaged in a sealed commercial container capable of preventing damage or breakage, with outer shipping containers meeting commercial standards for safe transport at the lowest cost to the destination. All packaging and labeling must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and must include the NSN, manufacturer name and CAGE code, date of manufacture, expiration or retest date, contract number, and lot number. The material is not classified as hazardous under FED-STD-313 and must be commercially packaged in accordance with ASTM D3951, though all DLA Master List requirements take precedence. Unit of issue is EA, quantity is five, and delivery is required within 20 days FOB destination with zero variance allowed. The destination is Fort Campbell, Kentucky, and shipment must be via traceable means, excluding parcel post. Labeling, marking, and palletization must adhere to DLA Packaging Requirements for Procurement, and compliance with all referenced technical and quality standards from the DLA Master List is mandatory. The contracting official must submit an EBS referral to confirm regulatory status, including bidder and manufacturer details. The original required delivery date is August 7, 2026.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
CAP, OPERATING, SURGICAL
Solicitation # SPE2DH-26-T-5887
This item is a disposable, bouffant-style surgical cap with a 21-inch diameter, made from non-woven, fire-resistant material in blue, sized for regular/medium use. It is packaged in units of 600 caps per package and must have a mandatory 60-month shelf life that cannot be extended, with no more than nine months allowed to have passed from the date of manufacture to the date of delivery to the government. The product must be marked in accordance with the latest edition of the Medical Marking Standard No. 1, and packaging must comply with DLA packaging requirements for procurement. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Government identification must be removed from non-accepted supplies. The item is identified by NSN 6532-01-308-5341, with a single package requested under purchase request 7017790847 and required delivery within five days of award. The solicitation is issued under SPE2DH-26-T-5887, with a response deadline of August 17, 2026, and performance will occur in Williamsburg, Virginia, under the oversight of the Department of Defense’s Medical Supply Chain FSH.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
TEST TUBE, BLOOD COLLEC
Solicitation # SPE2DH-26-T-5890
The contract specifies the procurement of 100 glass blood collecting test tubes with vacuum seal, each measuring 16 by 125 mm and holding 15 ml, with rubber caps and no anticoagulant, supplied in a single package unit. These tubes are nonsterile and must have a minimum shelf life of 24 months, with no more than three months elapsed between the date of manufacture and the date of delivery to the government. Labels on each unit must clearly display the NSN, manufacturer and CAGE code, date of manufacture or expiration, and the contract or lot number. Bidders are required to provide the source and part number being offered in their proposals. Packaging must comply with commercial standards as defined in the procurement document, ensuring each unit is sealed in a container that prevents damage or breakage, and all units must be packed in suitable commercial shipping containers that ensure safe, cost-effective delivery to the specified point of delivery in Williamsburg, VA. All items must adhere to Medical Marking Standard No. 1, replacing all prior references to MIL-STD-129. The NSN is 6640-00-145-1143, the solicitation number is SPE2DH-26-T-5890, and the response deadline is August 17, 2026, with delivery required within five days after award. The contracting office is under the Department of Defense, Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
CYLINDER, GRADUATED, LAB
Solicitation # SPE2DS-26-T-324J
A laboratory-grade graduated cylinder, 100 milliliters in capacity, made of glass, is being procured with specifications including a single scale and a pour-out mouth, measuring 29 millimeters wide by 255 millimeters high. The item, identified by NSN 6640-00-420-0000 and a unit of issue of each, is required in a single quantity and must be delivered within 20 days of award under solicitation SPE2DS-26-T-324J. All packaging must comply with commercial standards as outlined in DLA Packaging Requirements for Procurement, ensuring each unit is sealed in a protective container to prevent breakage and shipped in suitable exterior containers that guarantee safe delivery at the lowest cost to the designated point of delivery. Items must be marked in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, with documentation available through DLA Troop Support. The procurement falls under covered defense information protocols and incorporates technical and quality requirements from the DLA Master List, with the applicable revision tied to the solicitation date. Bidders are required to provide the source and part number of the supplied item, and the contract is managed by the Department of Defense’s Medical Supply Chain, with delivery targeted to FPO, ZIP 96693.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
SUNSCREEN PREPARATION
Solicitation # SPE2DP-26-T-4578
The contract is for the procurement of sunscreen towelettes with SPF 30, measuring 8x5 inches, individually sealed and packaged in units of 300 per package, under NSN 6505-01-586-4033. The product must have a non-extendable shelf life of 36 months, with no more than 31 months elapsed from the date of manufacture to the date of delivery to the government. All packaging and labeling must comply with Medical Marking Standard No. 1, replacing MIL-STD-129, and adhere to commercial packaging requirements per ASTM D3951 unless superseded by DLA’s Master List of Technical and Quality Requirements. Units must be sealed in suitable containers to prevent damage and packed in commercial shipping containers appropriate for safe transport at the lowest cost to the specified delivery point. The items must be marked and labeled according to DLA guidelines, and palletization must follow RP001 packaging standards. Hazardous material handling per FED-STD-313 and IP025 applies if applicable. The delivery is FOB destination with no variance allowed in quantity, and inspection and acceptance occur upon arrival. Delivery is required within 20 days of contract award, with an original due date of August 11, 2026. Shipments must use traceable freight methods and are prohibited from using parcel post. The delivery address is the Naval Air Warfare Center in Pax River, Maryland, with point of contact provided. The procurement is under solicitation SPE2DP-26-T-4578, with purchase request number 7017790835 and unit of issue as PG.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
WATER SAMPLING TEST RE
Solicitation # SPE2DH-26-T-5877
The contract is for the procurement of water sampling test reagents for dissolved oxygen colorimetric analysis with a testing range of 0 to 40 ppb and a reaction time of 30 seconds, supplied in unit of issue packages containing 30 items per pack, with a total quantity of 40 packs required. The item is identified by NSN 6630-01-068-5210 and is tied to purchase request 7017786150, with delivery required within 20 days after order. All packaging must comply with commercial standards as specified in the procurement document, ensuring each unit is sealed in a container that protects against damage and breakage, and all shipments must use approved commercial exterior containers suitable for safe delivery by common carrier at the lowest cost to the designated FPO address. Marking must adhere to Medical Marking Standard No. 1, superseding MIL-STD-129, with copies available through DLA Troop Support. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and the applicable revision is determined by the solicitation or award date. This solicitation, identified as SPE2DH-26-T-5877, was posted on August 9, 2026, with responses due by August 17, 2026, under the NAICS code 423450, managed by the Department of Defense’s Medical Supply Chain FSH office, with Tina Vu listed as the point of contact. The requirement also includes compliance with covered defense information provisions and DLA packaging standards, with bidders required to clearly specify the source and part number being offered.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
INDICATOR, STERILIZATIO
Solicitation # SPE2DH-26-T-5868
The contract is for the procurement of sterilization indicators, specifically steam tamper-proof strips designed for use with sterilization container systems, identified by NSN 6530-01-351-1698. The product is supplied in packages of 1,000 units each and must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must adhere to DLA requirements, and non-accepted supplies must have all government identification removed. The solicitation, issued under number SPE2DH-26-T-5868, was posted on August 9, 2026, with responses due by August 17, 2026. The requirement is for a single package, with a delivery deadline of 84 days after award, and the place of performance is specified as APO 09227-0000. The contracting activity falls under the Department of Defense, Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact. Bidders must clearly state the source and part number being offered to ensure compliance with specifications.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
DRAPE, SURGICAL
Solicitation # SPE2DH-26-T-5888
The contract is for the procurement of surgical drapes, specifically plastic disposable drapes measuring 51 by 51 inches with a sterile certification and a clear adhesive area of 3-7/8 inches by 4-7/8 inches. Each unit is packaged in a sealed container designed to protect the contents from damage and is further arranged in commercial shipping containers suitable for safe transport via common carriers at the lowest possible rate to the designated delivery point in Williamsburg, Virginia. Packaging and marking must strictly comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all units must be correctly labeled according to this standard. The unit of issue is a package containing 40 drapes, and the National Stock Number is 6530-01-151-1831. Technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Delivery is required within five days of award, and any non-accepted supplies must have government identification removed as per regulation. The contract was issued under solicitation SPE2DH-26-T-5888 with a response deadline of August 17, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
DRAPE, SURGICAL
Solicitation # SPE2DH-26-T-5862
Surgical drapes described are nonwoven, disposable, and sterile, measuring 18 x 26 inches, intended for use in minor surgical procedures and individually sealed. Each package contains 300 units, and the contract specifies a shelf life of 60 months with no more than nine months having elapsed from the date of manufacture to the date of delivery to the government. Packaging must comply with DLA Packaging Requirements for Procurement, and technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. Government identification must be removed from non-accepted supplies per RQ011. The item is identified by NSN 6530-01-169-7491 with a quantity of two packages, and delivery is required within 20 days of order award. The solicitation number is SPE2DH-26-T-5862, issued on August 9, 2026, with responses due by August 17, 2026, under the NAICS code 423450. Performance is to be delivered to Fort Stewart, Georgia, with Tina Vu of the Department of Defense’s Medical Supply Chain FSH listed as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
Federal
X-Ray Tube and Detector Component SupplyThe contract requires the supply of unlimited x-ray tubes and detector components specifically for the Philips Azurion 7 M20 Cath Lab, ensuring continuous operational readiness through rapid replacement of critical imaging parts. The provider must guarantee full warranty coverage for all delivered components, minimizing downtime and maintaining clinical performance standards in a high-volume medical environment. Delivery logistics must support immediate availability to meet urgent replacement needs at the designated performance location in Shreveport, Louisiana, with zip code 71101. This is a subcontract under the Department of Veterans Affairs, managed by the 256-NETWORK Contract Office 16, and is classified under NAICS code 423450 for medical equipment and supplies merchant wholesalers. The solicitation was posted on August 8, 2026, with a firm response deadline of August 14, 2026, at 3:00 PM. The agreement emphasizes reliable, scalable component supply without quantity restrictions, aligning with the mission-critical nature of the Cath Lab services provided to veteran patients, and requires the contractor to maintain compliance with all applicable regulatory and warranty obligations throughout the term of supply.
256-NETWORK Contract Office 16 (36C256)

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 423450
New
International
Infrastructure - Request for Quotes - Supply of Wheelchairs and Accessories for AADL
Solicitation # AB-2026-05031
The Government of Canada, through Infrastructure, is seeking to establish a pre-qualified vendor list for the supply of wheelchairs and related accessories, including batteries for the Assisted Adaptive Device Program. This solicitation, identified as AB-2026-05031, is open to vendors capable of meeting the technical and logistical requirements for delivering compliant mobility equipment across Alberta. The request is ongoing with responses accepted until June 30, 2028, allowing interested suppliers an extended window to submit quotations and demonstrate their ability to fulfill ongoing and future procurement needs. Vendor pre-qualification will be based on factors such as product compliance, delivery reliability, service support, and adherence to provincial guidelines for assistive devices. All submissions must be directed to the designated Contracting Authority, Josephine Youdeowei, via the provided email address, and performance of any resulting contracts will occur within Alberta. The initiative is classified under federal procurement processes, though no specific NAICS code or set-aside designation is listed. The solicitation is published on CanadaBuys, and potential vendors are encouraged to review the official notice on the provided digital link for full specifications, evaluation criteria, and submission protocols to ensure alignment with procurement expectations and standards.
Infrastructure

POSTED

1 day ago

DEADLINE

in almost 2 years
View Details
NAICS: 423450
New
SLED
Polk - Scott Air-Paks
Solicitation # PE-30125-NONST-2027-000000025
Polk County Government is seeking qualified contractors to submit sealed bids for the purchase of 30 Scott Air-Pak X3 Pros and 30 Scott AV 3000 HT size medium masks, with cylinders explicitly excluded from this procurement. Bids must be submitted by 10:00 AM EST on Wednesday, September 16, 2026, to the Commissioners Office at 216 Main Street in Cedartown, Georgia. The contract will be awarded to the bidder whose proposal most fully meets the specified requirements and best advances the interests of the county. Proposal documents are available in person at the Polk County Administration Office or online at polkga.org, and interested parties are encouraged to request them promptly. The solicitation is identified by number PE-30125-NONST-2027-000000025 and was posted on August 7, 2026. All inquiries should be directed to Mike Hanuscin at mhanuscin@polkga.org, the designated point of contact for this procurement.
Polk County Board of Commissioners

POSTED

2 days ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 339112
New
DIBBS
BEAKER, LABORATORY
Solicitation # SPE2DH-26-T-5884
The contract specifies the procurement of 250 milliliter laboratory beakers made of polypropylene, sold in packages of 50 units per pack, with a total quantity of one package. These beakers are autoclavable up to 250 degrees Fahrenheit or 121 degrees Celsius and feature dual graduations in milliliters and ounces. They are engineered for high resistance to strong acids, organic solvents, and common laboratory reagents, ensuring durability under demanding chemical conditions. The product is identified by NSN 6640-01-020-2755 and is subject to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date or award date. Packaging must comply with DLA requirements for medical acquisitions, including commercial packaging standards, sealed unit containers to prevent damage, and shipping containers suitable for safe transport at the lowest carrier rate. All items must be marked according to Medical Marking Standard No. 1, replacing prior MIL-STD-129 specifications. The contract also includes provisions for the removal of government identification from non-accepted supplies and applies covered defense information standards. Delivery is required within 20 days after order, with the solicitation issued under SPE2DH-26-T-5884, originating from the Department of Defense’s Medical Supply Chain FSH, and directed for performance in Jacksonville, North Carolina, with Tina Vu serving as the primary point of contact.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333998
New
DIBBS
SCHIRMER TEAR TEST
Solicitation # SPE2DH-26-T-5867
The Schirmer Tear Test with blue dye wicks is a medical supply item designed to measure tear production in animals, with each unit containing a box of fifty tests. The item is subject to strict packaging and marking requirements under the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all units must be sealed in containers that protect against damage or breakage. Shipping must be accomplished using commercial exterior containers that ensure safe delivery at the lowest possible rate to the designated point of delivery, with export packaging applied when necessary. The item is identified by NSN 6640-01-484-9445 and is being procured under solicitation SPE2DH-26-T-5867, with a delivery requirement of 84 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date depending on the acquisition type. The purchase is for one unit, and all supplies must comply with federal procurement standards including the removal of government identification from non-accepted items. The contracting office is the Medical Supply Chain FSH under the Department of Defense, with Tina Vu as the primary point of contact.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
ROBE, DRESSING
Solicitation # SPE2DH-26-T-5875
The contract is for a premium collarless patient examination robe designed for unisex use in size X Large, constructed from poly/cotton fashion poplin fabric with long sleeves, a large hang loop, and a detached belt featuring extra-large loops for enhanced adjustability. The robe includes two large inset pockets and a left breast pocket, with contrasting piping detailing and a navy color scheme. It measures 47.75 inches in length and 64 inches in sweep. The item is packaged in quantities of 12 per package, with a total purchase requirement of two packages. The National Stock Number is 6532-01-706-3685, and delivery is required within 20 days of award. All supplies must comply with DLA packaging requirements and technical/quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. Government identification must be removed from non-accepted supplies per RQ011. The solicitation, identified as SPE2DH-26-T-5875, was posted on August 9, 2026, with responses due by August 17, 2026, under NAICS code 339113, managed by the Department of Defense’s Medical Supply Chain FSH, with performance to be delivered to APO 09094-3219, and primary point of contact being Tina Vu at DLA.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333248
New
DIBBS
SAMPLING KIT, WATER
Solicitation # SPE2DH-26-T-5870
The contract is for the procurement of two sampling kits designed for water quality assessment, specifically targeting the collection and analysis of insect larvae and aquatic samples. Each kit includes a comprehensive set of tools: three sized dippers with strainers, a debris separator tray, two 250 mL sample jars, a permanent marker, a 500 mL wash bottle, a flashlight, a notepad, a 50 mL aquatic pipette, three 3 mL pipettes, and gloves. The unit of issue is a single kit, and the items are standardized under NSN 6640-01-699-3719. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance tied to the revision in effect at the time of solicitation or award. Packaging must meet DLA procurement standards, and non-accepted supplies must have government identification removed prior to return. The solicitation, identified as SPE2DH-26-T-5870, was posted on August 9, 2026, with a response deadline of August 17, 2026. The procurement is managed by the Medical Supply Chain FSH under the Department of Defense, with performance required at Williamsburg, Virginia, ZIP 23185-5830. The primary point of contact is Tina Vu, reachable via email and phone. Delivery is required within five days of award, and the acquisition falls under NAICS code 333248, indicating classification within instruments and related equipment manufacturing. There is no set-aside type specified, and the contract is open to federal suppliers.
All Other Industrial Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333998
New
DIBBS
CALIBRATOR, AIR SAMP
Solicitation # SPE2DH-26-T-5866
The contract is for the procurement of two air sampling calibrators, identified by NSN 6640-01-583-9093, under solicitation SPE2DH-26-T-5866, with a response deadline of August 17, 2026, and a delivery requirement of 85 days after award. All units must be packaged in commercial-grade, sealed containers that protect against damage and breakage, and shipped in exterior containers suitable for safe transport via common carrier at the lowest cost to the designated delivery point in APO, ZIP 96260-5479. Packaging and marking must comply strictly with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bidders are required to provide the source and part number of the equipment being offered. Technical and quality requirements referenced in the solicitation are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. Government identification must be removed from non-accepted supplies, and all documentation must adhere to DLA’s procurement and packaging policies for medical acquisitions. The purchasing agency is the Department of Defense, Medical Supply Chain FSH, and the point of contact is Tina Vu.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
FLOOR MAT, MEDICAL, A
Solicitation # SPE2DH-26-T-5882
The floor mat is a heavy-duty, medical-grade absorbent pad measuring 31 inches by 40 inches, designed specifically for high-fluid surgical environments to keep operating room floors dry and safe. It is engineered to instantly adhere to flooring surfaces without sliding, shifting, or bunching during procedures, ensuring stability even under foot traffic or movement of equipment like Mayo stands and carts. The mat effectively absorbs saline, blood, vomit, urine, and other bodily fluids while remaining waterproof and leakproof, preventing cross-contamination and enhancing sanitation. Constructed with 3 liters of absorbent material per pad, it is flame resistant and features an adhesive backing that sticks firmly to the floor but does not transfer residue to surgical gloves, enabling easy and safe removal. The gray-colored pads are suitable for use in operating rooms, scrub sinks, lab stations, and veterinary clinics, meeting stringent healthcare cleanliness standards. The product is sold in cases of twenty pads each, with the unit of issue being a case. The NSN is 6530-01-727-2135 and the purchase request number is 7017719769 for a quantity of five cases. Delivery is required within 20 days of award. The solicitation, identified as SPE2DH-26-T-5882, was posted on August 9, 2026, with a response deadline of August 17, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with packaging and supply handling subject to DLA standards. The contract falls under NAICS code 339113 and is managed by the Department of Defense through the Medical Supply Chain FSH office, with performance delivery designated to Houston, Texas, 77090-6916. All inquiries should be directed to Tina Vu, the primary point of contact at Tina.Vu@dla.mil or 445-737-1120.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 331313
New
DIBBS
HYGIENE KIT, PATIENT
Solicitation # SPE2DH-26-T-5880
The contract is for the procurement of 2 boxes of 12 Hygiene Kits, Patient, each box containing 12 complete units. Each unit must be sealed in a commercially appropriate container designed to protect its contents from damage or breakage, and all boxes must be packed in exterior shipping containers suitable for safe transport via common carrier at the lowest rate to the specified delivery point in Williamsburg, Virginia. Compliance with Medical Marking Standard No. 1 is mandatory, replacing all references to MIL-STD-129, and suppliers must ensure all markings adhere to this standard. The kits are governed by technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must meet DLA’s procurement standards, and government identification must be removed from non-accepted supplies. The NSN is 6530-01-621-4282, and bidders must clearly specify the source and part number they are offering. Delivery is required within five days of award, under solicitation SPE2DH-26-T-5880, issued by the Department of Defense’s Medical Supply Chain FSH, with inquiries directed to Tina Vu at Tina.Vu@dla.mil.
Alumina Refining and Primary Aluminum Production

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339114
New
DIBBS
GUTTA PERCHA POINTS
Solicitation # SPE2DH-26-T-5889
Gutta percha points for root canal therapy are specified as size 30 with a 0.04 taper, designed for use with all ISO rotary systems and hand-rolled for consistent quality. Each package contains 60 points, and the product is cadmium-free and radiopaque to ensure safe and effective use in endodontic procedures. The item is classified as a Type I CODE M item with a non-extendable shelf life of 24 months, and it must comply with DLA packaging, quality, and technical requirements as outlined in the DLA Master List of Technical and Quality Requirements. Government identification must be removed from non-accepted supplies, and bidders are required to clearly state the source and part number being supplied. The product isprocured under NSN 6520-01-533-3727 with a quantity of 10 packages, and delivery is required within 20 days of award. The solicitation, issued by the Department of Defense Medical Supply Chain FSH, has a response deadline of August 17, 2026, with primary point of contact Tina Vu. This item is subject to covered defense information requirements and must meet all applicable DLA procurement standards.
Dental Equipment and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339114
New
DIBBS
POINT, ENDODONTIC
Solicitation # SPE2DH-26-T-5864
The contract specifies the procurement of 6 boxes of endodontic gutta-percha points, each box containing 100 units, with a 0.04 taper and color-coded blue no. 30, identified by NSN 6520-01-701-6839. The material is intended for dental use and must meet technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition type. Packaging must comply with commercial standards, ensuring each unit is sealed in a protective container and all units are securely packed in commercial shipping containers suitable for safe delivery by common carriers at the lowest cost to Fort Hood, Texas, with delivery required within 20 days of award. All items must be marked in accordance with Medical Marking Standard No. 1, replacing MIL-STD-129, and copies of this standard are available through DLA Troop Support. The solicitation, issued under contract number SPE2DH-26-T-5864, includes tailored quality requirements for both manufacturers and non-manufacturers and mandates removal of government identification from non-accepted supplies. The procurement is federal, managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact and a response deadline of August 17, 2026.
Dental Equipment and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
PAD, HEAT TREATMENT
Solicitation # SPE2DH-26-T-5865
The product is a disposable heat treatment pad designed for instant and consistent pain relief through heat therapy, activated by simply squeezing and kneading. It is constructed with food-grade sodium acetate and non-toxic materials free of DEHP and natural rubber latex, ensuring safety for direct skin application. Measuring 6 by 9 inches, each pad is single-use and intended for disposal after one application. The unit of issue is a case of 16 pads, with storage recommended at room temperature. The product is identified by NSN 6530-01-724-0439 and is procured under solicitation SPE2DH-26-T-5865, with a response deadline of August 17, 2026, and a delivery requirement of 20 days after order award. The procurement falls under NAICS code 339113 and is managed by the Department of Defense’s Medical Supply Chain FSH, with performance at Luke Air Force Base, Arizona. Technical and quality requirements are governed by the DLA Master List, and packaging must comply with DLA standards. Removal of government identification from non-accepted supplies is also required. Point of contact for the solicitation is Tina Vu at Tina.Vu@dla.mil or 445-737-1120.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details