This Government Contract opportunity from Connecticut was posted on July 1, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Domestic-Sourced Vehicle Components Supply (BABA-Compliant)

Closed

State & Local

Submission Closed07/29/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332311

New

SLED

Heavy-Duty Industrial Door and Component SupplyThis subcontract for the California Department of Transportation involves the manufacture and delivery of heavy-duty industrial door assemblies and components for prime contractors working on maintenance station projects. The scope of work includes providing galvanized steel curtain slats of at least 22-gauge, weather-resistant hoods, and insulated door assemblies specifically engineered to withstand wind loads of 120 MPH. Additionally, the supplier must provide steel pipe and brackets for barrel assemblies along with reinforced steel bottom bars featuring weather seals. The contract requires the delivery of these industrial door assemblies and associated hardware to three separate sites, with the place of performance located in San Bernardino. This opportunity was posted on September 5, 2026, with a response deadline of September 19, 2026, falling under NAICS code 332311.

California Department of Transportation

POSTED

DEADLINE

High-Pressure Gas CylindersThis subcontract involves the supply of ten high-pressure carbon cylinders with valves for prime contractors working on Texas Comptroller of Public Accounts projects for the Texas Department of Public Safety. The equipment must be 4500 PSI, natural, non-tactical, 60 MIN cylinders that conform exactly to the proprietary specifications of Avon 605363 in accordance with Texas Government Code Section 2155.067. The contract is categorized under NAICS code 332311 and is managed by the Texas Comptroller of Public Accounts. The solicitation was posted on September 4, 2026, with a response deadline of October 6, 2026.

Comptroller of Public Accounts

POSTED

DEADLINE

NIJ Level IIIA Armored Gatehouse ManufacturingThis subcontract involves the fabrication and supply of two armored gatehouses for Department of Veterans Affairs facility projects located in New Orleans, Louisiana. The project requires the integration of ballistic armor meeting NIJ Level IIIA specifications into prefabricated metal buildings, utilizing ballistic-rated armor and steel according to provided cut sheets. The opportunity is designated as a total Small Business Set Aside under NAICS code 332311 and is managed by the Network Contract Office 16. The final deliverable consists of two completed NIJ Level IIIA Armored Gatehouses delivered to the specified site in New Orleans.

256-NETWORK Contract Office 16 (36C256)

POSTED

DEADLINE

Prefabricated Bullet-Resistant Guard Booth Supply

POSTED

DEADLINE

Custom Slide-in Water Tank Fabrication

Csa Northwest 2 Usda-Fs

POSTED

DEADLINE

5410--Exterior Decontamination Shelter - FARGO VA Medical Facility

Solicitation # 36C26326Q1087

The Department of Veterans Affairs, Network Contract Office 23, is soliciting bids for an exterior decontamination shelter at the Fargo VA Medical Facility under solicitation number 36C26326Q1087. This opportunity is set aside for Service-Disabled Veteran-Owned Small Businesses and falls under NAICS code 332311. All offers must be submitted by September 11, 2026, and the successful offeror must be registered and active in the System for Award Management. Deliveries are to be made to the Fargo VA Health Care System Warehouse in North Dakota. Prospective bidders must submit all inquiries to Mariah Delaney via email by September 8, 2026, at 13:00 CST. It is critical that offerors provide a signed Buy American Act Certificate in accordance with clause 52.225-2 to avoid an irresponsible determination.

Network Contract Office 23 (36C263)

POSTED

DEADLINE

Replace Connex Boxes on Pier

Solicitation # 16910Q260000003

The Department of Homeland Security, through USCG Base New Orleans, is soliciting quotations for the procurement and delivery of modified conex storage containers to support operational requirements at USCGC AXE in Morgan City, Louisiana. This small business set-aside contract requires the contractor to furnish five 40-foot high cube containers and one 20-foot container, both of which must be in new or one-time use condition. The 40-foot units require a full interior buildout including 2x4 framing, rigid foam insulation, plywood finishing, LED industrial lighting, a circuit breaker load center, and a window AC unit. The 20-foot unit requires framed and insulated construction, LED lighting, and specific door and sidewall ventilation. The contractor is responsible for all safety measures during delivery and must adhere to OSHA regulations and the Resource Conservation and Recovery Act. Deliveries are to be coordinated with the Contracting Officer's Representative and must occur between 8:00 AM and 4:00 PM on weekdays. Following the award, the contractor must provide manufacturer specifications, electrical documentation, and warranty information within 14 calendar days, as well as a delivery schedule within the same timeframe. While the contractor handles delivery to the site, the government will perform the final placement of the units. All equipment must be fully functional upon delivery and include standard manufacturer warranties.

Base New ORLEANS(00029)

POSTED

DEADLINE

INTAC Exterior Vehicle Storage Facility (Carport)

Solicitation # W912HQ26QA025

Solicitation W912HQ26QA025, issued by the Department of Defense through the U.S. Army Corps of Engineers Headquarters, seeks a contractor to provide and construct an exterior storage carport facility for INTAC training fleet vehicles. The project is located at the Summit Point Training Facility in Summit Point, West Virginia. The response deadline for this solicitation is September 11, 2026. The required facility is a 40 by 80 foot carport featuring a 3/12 roof pitch, 8 foot leg height, closed sides, and open ends with vertical gables. Technical specifications require 14 GA tubing and standard 29 GA sheeting, with an evergreen roof and trim and sandstone sides. The structure must be installed on a gravel surface and be rated for wind speeds of 150 mph and 35 psf. A critical requirement is that the facility must be designed and constructed to be deconstructable and relocatable. The contractor is responsible for providing the building design and plans. Primary points of contact for this effort include Giorgiana Chen and Alexander Arnoe, with Gary Kehoe serving as the INTAC Program Manager at the performance site.

POSTED

DEADLINE

36C25626Q1319_1 Armored Gatehouses

Solicitation # 36C25626Q1319_1

The Department of Veterans Affairs, through Network Contract Office 16, is soliciting competitive quotes for the procurement of Police Security Armored Gatehouses for the Southeast Louisiana Veterans Health Care System located in New Orleans, Louisiana. This acquisition is issued as a Request for Quotation under solicitation number 36C25626Q1319_1 and is conducted in accordance with FAR Part 12 for commercial items. The project falls under NAICS code 332311 for Prefabricated Metal Building and Component Manufacturing, which carries a size standard of 500 employees. This opportunity is 100 percent set aside for small businesses. Interested parties must submit electronic quotes to Tiffany Conner by September 11, 2026, at 10:00 a.m. Central Standard Time. All inquiries and official responses must be handled via email, as phone calls will not be accepted. The final selection will be based on the provided Statement of Work and the specific requirements outlined in the contract line item numbers.

256-NETWORK Contract Office 16 (36C256)

POSTED

DEADLINE

Solicitation # 2023H2-26-Q-00056

The Department of the Treasury's Operation Services is seeking a contractor for the Guard Booth project at the IRS Austin Campus in Texas. The selected contractor will be responsible for the demolition and removal of existing guard booths at perimeter entry and exit Gates 2 and 3, followed by the delivery and installation of two 4x4 Durasteel bullet-resistant guard booths. These new installations must meet Interagency Security Committee Level IV or higher standards, and the contractor is responsible for all labor, equipment, materials, supervision, and site verification. This opportunity, solicitation number 2023H2-26-Q-00056, is designated as a total Small Business Set Aside under NAICS code 332311. Interested parties must submit their responses by September 18, 2026, at 2:00 PM. Primary coordination for this contract is managed by Dr. Carolyn Bennett and Katie Marrette.

POSTED

DEADLINE

GSA Vault Doors Specialty Supply and InstallThis subcontract involves the supply and installation of high-security vault doors for prime contractors working on projects for the Commonwealth of Kentucky Department of Facilities and Support Services. The scope of work specifically requires Class 5-A Armory Vault Doors that comply with GSA Regulation AA-D0-600D, featuring chromium or cadmium plating and FF-L-2740 combination locks. The provider is responsible for delivering GSA-approved doors complete with certification labels, required GSA labeling, and bonded assembly drawings. This opportunity is categorized under NAICS code 332311 and is associated with the Kentucky Department for Natural Resources, with a response deadline of September 18, 2026.

Dept for Natural Resources

POSTED

DEADLINE

Supply of Metal Tube Assemblies (NSN 4710001332650)

FLUID HANDLING DIVISION

POSTED

4 days ago

DEADLINE

in 1 day

AI Contract Overview

The contract seeks the supply of iron, steel, and manufactured products essential for vehicle upfitting, with strict adherence to Build America Buy America requirements ensuring all materials are domestically sourced. Subcontractors must provide components that meet federal criteria for domestic content, emphasizing the use of U.S. mined, produced, and manufactured goods throughout the supply chain. The solicitation is open for submissions until July 29, 2026, with proposals required to demonstrate compliance through documentation of origin and manufacturing processes. The work will support procurement efforts under DAS Procurement in Connecticut, and while no specific performance location is indicated, the delivered items are intended for use in federal vehicle upfitting projects governed by BABA regulations. Participation is limited to subcontractors capable of verifying domestic sourcing and meeting the North American Industry Classification System code 332311 for forged products, fabricated metal products, and related manufacturing.