Double Arming Bolts

The contract calls for the procurement of double arming bolts measuring 5/8 inch by 12 inches, featuring fully rolled threading and a minimum ultimate strength of 12,400 pounds, with cone-type points at both ends and hot dipped galvanized finish. Each bolt must be supplied with four square nuts threaded onto the shaft, and all units must be packed in standard cartons exclusively; bulk packaging is not permitted. Only approved manufacturers and specific part numbers are accepted, including UTILSVC5076, ALLIEDB5952, ALUMA-FOAF8862, HUGHESBTR612-F2N, VICTORY581112DAHDG, GRIDPOWU8862, MACLEANJ8862, STLCTYSC-8862-BG, PWERLINEP8862, COOPERDF2D12, and HUBBEL8862. The solicitation, identified by number Z4891, was posted on July 30, 2026, with a response deadline of August 4, 2026, at 7:00 PM. It is issued by Nashville Electric Service under the Tennessee state agency, targeting SLED-type procurement. All deliveries must be performed in Nashville, Tennessee. The primary point of contact for inquiries is Bailey Allen, Procurement Contact, reachable via email at ballen1@nespower.com or by phone at 615-747-3724. Further details and submission requirements can be accessed through the vendor portal at https://vendor.nespower.com/?bid=Z4891.