Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

DOUBLER

Active
SPEFA5-26-T-0929Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, identified by solicitation number SPEFA5-26-T-0929 and titled DOUBLER, pertains to the procurement of three units of NSN 1560-LL-NCB-5318, a critical application item for Bell Textron Inc with part numbers 212-030-156-021, 212-030-156-021S, and 212-030-156-21. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951 for packaging. Identification and marking must comply with MIL-STD-130N as of November 16, 2012, and packaging and labeling must follow MIL-STD-129. Sampling procedures require zero non-conformances under MIL-STD-1916 or ASQ H1331, with attributes classified as critical, major, or minor assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The material has no shelf life requirement and is subject to destination inspection and acceptance. Delivery is due within 16 days of contract award with FOB destination terms, zero quantity variance permitted, and all items must be palletized per RP001 requirements. The units of issue are each (EA), with total value specified per line item. The contract designates two separate delivery addresses: a parcel post address for documentation and a freight shipping address at Building 148, Bay C, Cherry Point, NC, which serves as the place of performance. The required delivery date is August 22, 2026, and all packaging must reflect the specified Unit of Issue and Quantity per Unit Pack. The solicitation was issued on July 20, 2026, with a response deadline of July 28, 2026, and is managed by the Department of Defense’s DLA Fleet Readiness Center, with primary point of contact Larry Kemp.

General Info

Procure three NSN 1560-LL-NCB-5318 units, deliver by August 22, 2026, to Cherry Point, NC, per MIL-STD and DLA requirements.

Agency

Department Of Defense → DLA FLEET READINESS CENTER DLA PSCView Agency

NAICS

488190 - Other Support Activities for Air TransportationView NAICS

Place of Performance

PSC 8021, CHERRY POINT, NC, 28533-0021, US

Set-Aside

NONE

Documents

(1)

RFQ SPEFA5-26-T-0929 DLA Aviation Cherry Point

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA FLEET READINESS CENTER DLA PSC
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DLA FLEET READINESS CENTER DLA PSC
View Agency Profile
Office AddressUS
Contacts
Larry Kemp
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DOUBLER
DOUBLER
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
MIL-STD-130N(1) DATED 16 NOV 2012.
IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
CRITICAL APPLICATION ITEM
BELL TEXTRON INC 97499 P/N 212-030-156-021
BELL TEXTRON INC 97499 P/N 212-030-156-021S
BELL TEXTRON INC 97499 P/N 212-030-156-21
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPEFA5-26-T-0929
SECTION B
PR: 7017565507 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017565507 0001 EA 3.000
NSN/MATERIAL:1560LLNCB5318
DELIVERY (IN DAYS):0016
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N01DLA
FLEET READINESS CENTER DLA
PSC 8021
CHERRY POINT NC 28533-0021
US
FREIGHT SHIPPING ADDRESS:
N01DLA
FLEET READINESS CENTER DLA
BEACHEY ROAD, BUILDING 148, BAY C
CHERRY POINT NC 28533-5040
US
Need Ship Date:00/00/0000 Original Required Delivery Date:08/22/2026
SPEFA5-26-T-0929 NSN/Part Number: 1560-LL-NCB-5318 Quantity: 3 EA Purchase Request: 7017565507QTY: 3 Delivery: 16 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 488190
New
DIBBS
International Logistics and FOB Origin ShippingThe contract encompasses the execution of an international shipment originating in the United States and destined for Spain, structured under FOB Origin terms, which place responsibility for transportation and associated costs on the buyer once the goods are loaded at the point of origin. Key responsibilities include the preparation and submission of all required customs documentation, seamless coordination with carriers to ensure timely and compliant transit, and application of specified military labeling in accordance with defense standards. The logistics operation must adhere to stringent regulatory requirements due to its connection with the Department of Defense, ensuring that all shipments meet military-specific identification and handling protocols. The work is classified under NAICS code 488190, indicating it relates to other support activities for air transportation, and is issued as a subcontract under the Defense Logistics Agency, affirming its critical role in supporting defense supply chain operations.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 488190
New
DIBBS
Domestic and International Freight Logistics (FOB Destination)The contract encompasses the domestic and international transportation of tires from the supplier to two specified destinations: Misawa, Japan, and APO AP 96319-5000, under FOB Destination terms, meaning the supplier is responsible for all shipping costs and risks until the goods arrive at the final delivery points. It includes full coordination of international freight logistics, ensuring compliance with Department of Defense shipping regulations and procedures, with particular attention to documentation, customs clearance, and secure handling appropriate for military supply chains. The work is classified under NAICS code 488190 for other support activities for air transportation, reflecting the specialized nature of the logistics services required. The contract is a subcontract awarded by the Defense Logistics Agency under the Department of Defense, with a posted date of July 20, 2026, indicating it is a forward-looking procurement. Execution must adhere to all DoD compliance standards, including proper labeling, tracking, and reporting to ensure accountability and readiness. Freight logistics must support both overseas military installations and U.S. military postal addresses, requiring coordination across multiple transportation modes and jurisdictions. The terms specify delivery obligations at destination, placing responsibility on the contractor to manage end-to-end delivery, including any contingencies related to international transit, timing, and regulatory adherence.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 488190
New
DIBBS
International Freight and Logistics to QatarThe contract involves the end-to-end transportation of adhesive from the supplier to Al Udeid Air Base in Qatar under FOB Destination terms, ensuring the supplier retains responsibility for all shipping costs, risks, and logistics until the goods arrive at the final destination. This includes comprehensive export documentation, customs clearance in both origin and destination countries, and secure final delivery to the military installation. The service provider must navigate international regulatory requirements and ensure full compliance with U.S. Department of Defense standards for defense-related shipments. The contract is classified as a subcontract under the North American Industry Classification System code 488190, which pertains to other support activities for water transportation, reflecting the specialized nature of international logistics coordination. It is managed by the Defense Logistics Agency under the Department of Defense, and the performance location is fixed at Al Udeid Air Base. Although the solicitation number and point of contact are not provided, the contract is accessible via the DIBBS system with the referenced award and delivery details, indicating formal documentation and oversight within the federal acquisition framework.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 488190
New
DIBBS
International Military Logistics and Freight ManagementThe contract entails the end-to-end logistics management of 12 service kits, requiring transportation from the contiguous United States to Sweihan Air Base in the United Arab Emirates. This includes secure export packaging, international freight coordination, customs clearance, and compliance with all Defense Logistics Agency directives. The provider must ensure full traceability of each kit through the Transportation Control Number system and maintain adherence to military logistics standards throughout the supply chain. The work involves complex international shipping requirements, with responsibility falling on the contractor to guarantee timely and compliant delivery despite geopolitical and regulatory challenges. All activities must align strictly with DLA’s operational protocols, emphasizing accountability, security, and real-time tracking. The contract is classified as a subcontract under the NAICS code 488190, indicating specialized freight transportation services, and is managed by the Department of Defense through the Defense Logistics Agency. While no specific point of contact or set-aside details are provided, the place of performance is clearly defined as Sweihan Air Base, UAE, and the contract is posted under a DIBBS record with a known award identifier. The contractor is expected to handle every logistical component, from initial packaging to final delivery confirmation, ensuring zero disruption to mission readiness.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 488190
New
DIBBS
HOUSING, MECHANICAL DRIThe contract pertains to the procurement of four units of a mechanical drive housing, identified by NSN 3950-01-625-6159, under solicitation SPE8EE-26-T-2088, with a response deadline of July 23, 2026. It is subject to the Department of Defense’s DLA Master List of Technical and Quality Requirements, which governs all technical and quality specifications referenced by R or I numbers, with the applicable revision determined by the solicitation or award date. The procurement includes specific engineering exceptions replacing outdated standards such as ASME B18.2.4.3M, ASTM B265, and ASTM B348 with newer or alternative specifications like DIN 935-1 and DIN 937. Compliance with DLA packaging requirements is mandatory, and the contractor must implement Cybersecurity Maturity Model Certification Level 2 self-assessment measures, as covered defense information applies. The contractor is required to remove government identification from any non-accepted supplies. Delivery is due within 167 days after contract award, with performance location specified as New Cumberland, PA, 17070-5002. Technical drawings are accessible via the DIBBS portal during the open solicitation period, and all inquiries must be directed to Philip Ferrara at DLA.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 488190
New
DIBBS
SKINThis contract, issued by the DLA Fleet Readiness Center under solicitation SPEFA5-26-T-0927, specifies the procurement of two units of a critical application item identified by NSN 1560-LN-003-2811 and part number 65213-06002-203 from Sikorsky Aircraft Corporation. The item is classified as having no shelf life requirement and must comply with stringent quality and technical standards, including MIL-STD-130N for identification marking of U.S. military property and MIL-STD-1916 or equivalent zero-based sampling plans for inspection, with critical attributes requiring zero non-conformances during verification. All packaging and marking must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA Packaging Requirements, and the DLA Master List of Technical and Quality Requirements supersedes any conflicting specifications. Delivery is required FOB destination in 84 days, with no variance allowed in quantity, and inspection and acceptance occur at the delivery point. The contract specifies a unit price of $2.00 per item, totaling $4.00, with the purchase request number 7017562094 and required delivery date of January 16, 2027. The item must be delivered to the designated freight address at Cherry Point, North Carolina, with a separate parcel post address for documentation purposes. The solicitation was posted on July 20, 2026, with a response deadline of July 28, 2026, and falls under NAICS code 488190. The point of contact for inquiries is Larry Kemp, with direct phone and email provided. The unit of issue is EA, and all packaging must reflect the approved Unit of Issue and Quantity per Unit Pack as defined in the contract documentation, with full compliance mandated across technical, quality, and logistics parameters.
DLA FLEET READINESS CENTER DLA PSC

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
TUBE ASSEMBLY, PRESSThe contract specifies the procurement of a tube assembly for press applications under solicitation SPEFA5-26-T-0931, with the NSN 1680-LN-001-3117 and part number 2210595-1 from Honeywell International Inc. Five units are required, each to be delivered FOB destination within 93 days of the contract award, with no tolerance for quantity variance. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, which take precedence over all other standards. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1 using a zero-defect acceptance criterion unless otherwise stated, with attributes classified as critical, major, or minor assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item is designated as a critical application and must be identified per MIL-STD-130N dated 16 Nov 2012. Inspection and acceptance occur at the origin, and packaging must conform to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization following DLA packaging requirements. The material has no shelf life. Delivery is to the Fleet Readiness Center DLA in Cherry Point, North Carolina, with specific parcel post and freight shipping addresses provided. The original required delivery date is January 12, 2027, and the unit price is listed as $5.00 per unit.
DLA FLEET READINESS CENTER DLA PSC

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
ID PLATEThis contract pertains to the procurement of a single ID plate identified by NSN 9905-LL-NCA-4134 and part number 26216532, issued under solicitation SPEFA5-26-T-0932 by the DLA Fleet Readiness Center. The item is required in a quantity of one unit, with delivery mandated within eight days of contract award, delivered FOB destination to Cherry Point, North Carolina. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers; RP001 and RQ017 specifically dictate packaging and physical identification standards. Sampling and inspection must conform to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes not otherwise defined are treated as major with verification level IV or AQL 1.0. Packaging must comply with ASTM D3951 and MIL-STD-129 labeling, aligned with DLA’s packaging and palletization rules, with the DLA Master List overriding any conflicting standards. The ID plate carries no shelf life restriction. Delivery must be made to the designated freight and parcel post addresses at Cherry Point, with inspection and acceptance occurring at the destination. The unit of issue is each (EA), with no quantity variance permitted, and the original delivery deadline is August 17, 2026.
DLA FLEET READINESS CENTER DLA PSC

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
SEAL, PLAINThe contract pertains to the procurement of one unit of a plain seal, part number 70206-22001-113 with NSN 5330-LN-003-5217, for delivery to the Fleet Readiness Center Southeast in Jacksonville, Florida, within five days of award. Delivery is FOB destination with no quantity variance allowed, and inspection and acceptance occur upon arrival at the destination. The item is designated as a critical application component and does not have a shelf life requirement. Unit identification and marking must comply with MIL-STD-129, and packaging must adhere to ASTM D3951 unless superseded by higher-priority DLA Master List of Technical and Quality Requirements. Packaging must also follow DLA-specific packaging guidelines, including palletization standards. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The seal is not required to have item unique identification per customer request. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the revision in effect on the solicitation issue date controlling. The item must be shipped by the fastest traceable means, excluding parcel post. The required delivery date is July 22, 2026, and the solicitation response deadline is July 28, 2026, issued under contract SPEFA3-26-T-0323 by the Defense Logistics Agency.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
BEARING REMOVAL TOOThe contract is for the procurement of one Bearing Removal Tool with NSN 5120-01-521-1292 and parts number RKC4103-10 from REXNORD INDUSTRIES, LLC, under solicitation SPE4A6-26-T-08BL. Delivery is required within 20 days to Langley AFB, Virginia, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including MIL-STD-129 marking with no special markings. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively. Configuration changes require an Engineering Change Proposal or variance request, and government identification must be removed from non-accepted supplies. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, and the revision in effect on the solicitation issue date controls. The unit of issue is each, and the tool must be shipped by the fastest traceable means, explicitly excluding parcel post. The point of contact is Antonia Willcox, and the scheduled delivery date is July 14, 2026.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
COUNTER ASSEMBLYThe contract pertains to the procurement of a single Counter Assembly, identified by NSN 1680-LL-SNS-A263 and part number 36011, supplied exclusively by CARP INDUSTRIES CORP and AEROSONIC LLC. This is a critical application item with no shelf life requirement and no need for Item Unique Identification, as specified by the Service customer under DFARS 252.211-7003(c)(1)(i). All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any referenced standards. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1 using a zero-defect acceptance criterion unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA-specific packaging guidelines, and the unit of issue is each (EA). Delivery is required within five days FOB destination, with no variance allowed in quantity. Inspection and acceptance occur at the destination. Shipping must be via the fastest traceable means, excluding parcel post, to the designated Naval Base Coronado receiving location. The required delivery date is July 14, 2026, and the contract was issued under solicitation SPEFA1-26-T-0255 with a response deadline of July 23, 2026.
DLA RECEIVING OFFICER NAVAL BASE CORONADO BLDG

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 488190
New
DIBBS
MANIFOLD, HYDRAULICThe contract involves the procurement of six hydraulic manifolds identified by NSN 4730-01-475-7765 and part number MXP-04-750CL-75L-75LCL-75L from LUBRIQUIP INC DBA LUBRIQUIP INC, with a delivery requirement of 190 days after the delivery order is issued and a firm delivery date of January 27, 2027. Delivery is FOB origin, with inspection and acceptance occurring at the destination facility located at 2083 Normandy Drive, New Cumberland, PA 17070-5002. Packaging must comply with MIL-STD-2073-1E using QUP:001 (clean and dry preservation), unit container 10, intermediate container D3, and pack code U, palletized per DLA’s RP001 requirements. Marking on both packaging and bare items must adhere to MIL-STD-129, including the contract number, NAWC CAGE code, and part number unless overridden by technical drawings. The item is designated as a critical application item requiring government engineering source approval and is restricted, with mandatory inclusion of a Certificate of Quality Compliance and review of the Technical Data Package. Mercury and mercury-containing compounds are prohibited unless functionally essential in specific components like batteries, instruments, or weapon systems as defined by NAVSEA, and all such items must have shock-proof construction with secondary containment. Class I ozone-depleting chemicals are banned entirely, and substitution requests require prior approval. The supplier must meet NAVAIR aircraft launch and recovery equipment traceability standards and ensure all markings conform to engineering drawings. The contract includes a full suite of FAR and DFARS clauses covering equal opportunity, human trafficking prevention, employment eligibility verification, sustainable products, hazardous material identification, cybersecurity safeguards, subcontracting practices, inspection procedures, and prohibitions on hexavalent chromium, toxic material storage, and procurement from communist Chinese military companies. The contractor must comply with NIST SP 800-171 for safeguarding controlled unclassified information and adhere to labeling requirements under OSHA’s Hazard Communication Standard and MIL-STD-129. Payment must be processed via Wide Area WorkFlow (WAWF), and invoicing cannot use alternative systems like IPP unless explicitly authorized. All offerors must provide representations on small business status, Unique Entity ID, C
NUCLEAR REACTOR PROGRAM

POSTED

1 day ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → DLA FLEET READINESS CENTER DLA PSC

Same awarding agency

NAICS: 561910
New
DIBBS
Packaging, Marking, and Shipping ComplianceThe contract requires full compliance with DLA RP001, MIL-STD-129, and ASTM D3951 for the packaging, labeling, and shipment of tube assemblies intended for military logistics. All work must adhere strictly to federal military standards ensuring proper marking, documentation, and packaging integrity to support standardized handling and tracking throughout the defense supply chain. This includes accurate identification labels, barcoding, unit packaging, and shipping documentation to meet DLA’s logistical requirements without deviation. The procurement is issued as a subcontract under the NAICS code 561910 by the DLA Fleet Readiness Center DLA PSC, part of the Department of Defense, with performance required at Cherry Point, North Carolina, ZIP 28533-0021. The solicitation was posted on July 20, 2026, and responses are due by July 28, 2026. All deliverables must be aligned with the DLA’s operational protocols to ensure seamless integration into military depots and forward-deployed units, and failure to meet the specified standards may result in rejection of shipments or non-compliance penalties.
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance (CUI Protection)The contract requires implementation and maintenance of NIST SP 800-171 controls to protect Covered Defense Information, ensuring that all systems and processes handling this sensitive data meet federal cybersecurity standards. This includes establishing robust safeguards for confidentiality, integrity, and availability of data, as well as fulfilling mandatory incident reporting obligations under DFARS 252.204-7012 in the event of a security breach or compromise. The contractor must also provide ongoing support to achieve and sustain CMMC Level 2 compliance, aligning cybersecurity practices with the Defense Department’s certification framework for defense contractors handling controlled unclassified information. All work is to be performed at Cherry Point, North Carolina, with a response deadline of July 28, 2026, and the procurement is classified as a subcontract under NAICS code 541512 for computer systems design services. The contracting activity falls under the Department of Defense’s DLA Fleet Readiness Center, indicating that the work is mission-critical to sustaining operational readiness and protecting sensitive defense data. The contractor is expected to maintain continuous compliance with evolving federal cybersecurity requirements and demonstrate operational readiness for audits or assessments related to CMMC and NIST frameworks.
Computer Systems Design Services

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & SDS ManagementThe contract requires the timely pre-award submission and continuous maintenance of Safety Data Sheets in full compliance with OSHA 29 CFR 1910.1200(g), ensuring accurate and up-to-date documentation for all hazardous materials delivered under the agreement. Performance must include precise tracking of hazardous substances at the NSN/SIN level to support lifecycle management, regulatory adherence, and operational safety across all fulfillment activities. The work is tied to the Department of Defense's DLA Fleet Readiness Center, with performance primarily based at Cherry Point, North Carolina, and is classified under NAICS code 541690 for other scientific and technical consulting services. All submissions and updates must align with federal safety standards and be maintained throughout the contract term to ensure uninterrupted compliance. The solicitation is issued as a subcontract with a deadline for response on July 28, 2026, and was posted on July 20, 2026. While no set-aside designation is specified, participation is open to qualified subcontractors capable of meeting strict regulatory requirements for hazardous material documentation. The contractor must demonstrate proven capability in SDS management, NSN/SIN-level inventory tracking, and experience working with Department of Defense logistics systems. Failure to maintain accurate, accessible, and compliant SDS records could result in delivery delays, non-compliance penalties, or contract termination. The DLA FLEET READINESS CENTER DLA PSC expects a high degree of precision and diligence in all aspects of hazardous materials documentation and reporting.
Other Scientific and Technical Consulting Services

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
DIBBS
Precision Machined Tube Assembly ManufacturingThe contract requires the manufacture of five precision Tube Assemblies, Press, identified by NSN 1680LN0013117, to meet rigorous military specifications with quality assurance at AQL 0.1 and Verification Level VII, ensuring every component adheres to exacting dimensional and performance standards. Each unit must be uniquely item identified per MIL-STD-130N, with permanent, machine-readable marking to support full lifecycle tracking within Department of Defense logistics systems. The work is classified under NAICS code 332999 for other fabricated metal product manufacturing and is issued as a subcontract by the DLA Fleet Readiness Center DLA PSC under the Department of Defense, with performance required at Cherry Point, North Carolina, 28533-0021. Responses must be submitted by July 28, 2026, with the solicitation posted on July 20, 2026, through the DIBBS platform.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and Covered Defense Information SafeguardingThe contract requires the implementation of NIST SP 800-171 security controls and compliance with DFARS 252.204-7012 to protect covered defense information handled within contractor systems. This subcontract is aimed at ensuring that all applicable cybersecurity safeguards are enforced to prevent unauthorized access, disclosure, or compromise of sensitive defense data. The contractor must establish, maintain, and verify the effectiveness of controls covering access control, audit and accountability, configuration management, identification and authentication, incident response, maintenance, media protection, personnel security, risk assessment, system and communications protection, and system and information integrity. The solicitation is issued under the Department of Defense through the DLA Fleet Readiness Center DLA PSC and falls under NAICS code 541512, indicating it relates to computer systems design services. The contract is structured as a subcontract with no set-aside designation, and responses must be submitted by July 24, 2026. Performance is expected to occur at locations designated by the contracting office, with no specific city or state identified in the details. Interested parties must access the official solicitation through the DIBBS portal using the provided link to obtain full terms, conditions, and submission requirements.
Computer Systems Design Services

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection and Acceptance SupportThe contract requires performing pre-shipment quality inspections on products using either MIL-STD-1916 or ASQ Z1.4 zero-conformance sampling plans to ensure compliance with stringent acceptance criteria. All inspections must be conducted with full traceability, including detailed documentation that links each inspection result to specific lots, batches, or individual units, ensuring end-to-end accountability and audit readiness. The work supports the Department of Defense’s FLEET READINESS CENTER and is issued as a subcontract under NAICS code 541330, indicating technical and scientific consulting services. Bidders must submit responses by July 24, 2026, with no set-aside designation specified, meaning eligible contractors of any size may compete. The place of performance and contact details are not provided, but all activities are expected to align with the agency’s operational requirements for military readiness and supply chain integrity.
Engineering Services

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 493190
New
DIBBS
Packaging and Labeling Compliance ServicesThe contract requires provision of packaging, labeling, barcoding, and preservation services fully compliant with MIL-STD-129 standards for government shipments, ensuring all items are properly prepared for military logistics and storage. Services include kitting of components and generation of complete documentation to support secure and traceable transport. The work must adhere strictly to Department of Defense requirements for identification, marking, and protection of materiel throughout the supply chain. This is a subcontract opportunity issued by the DLA Fleet Readiness Center under the DLA PSC, classified under NAICS code 493190, with responses due by July 24, 2026. The place of performance and specific delivery locations are not detailed in the posting, and no set-aside provisions are specified, meaning eligibility is open to all qualified subcontractors. All activities must ensure full compliance with federal military packaging and labeling regulations to support seamless integration into defense logistics networks.
Other Warehousing and Storage

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 313210
New
DIBBS
Supply of Satin Cloth per AMS-C-9084 SpecificationsThe contract calls for the procurement and delivery of eight rolls of satin cloth, supplied as a single continuous length, to meet the military specification AMS-C-9084, ensuring the material meets stringent quality and performance standards for defense applications. The cloth must be packaged in full compliance with PPP-P-1133 and MIL-STD-129 requirements, which govern labeling, handling, and shipment procedures to ensure uniformity and traceability within the Department of Defense supply chain. This is a subcontract under the NAICS code 313210, indicating it involves textile mill products, and is managed by the DLA Fleet Readiness Center under the Department of Defense. The solicitation was posted on July 20, 2026, with a response deadline of July 24, 2026, allowing contractors a brief window to submit proposals. The place of performance and point of contact details are not specified, but the contract is accessible via the DIBBS platform, where interested parties must review full terms and submit bids. The absence of a set-aside designation suggests the opportunity is open to all qualified vendors without restrictions based on business size or ownership type. Failure to meet the technical specifications for material, packaging, or delivery timelines will result in non-compliance and likely disqualification.
Broadwoven Fabric Mills

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 541690
New
DIBBS
Quality Assurance and Inspection ServicesThe contract seeks third-party inspection and certification services for doubler components to ensure full compliance with DLA quality requirements, SAE AS9003, and applicable MIL-STD standards. The work involves verifying that all doubler components meet the stringent technical and quality benchmarks mandated by the Department of Defense, with a focus on structural integrity, material authenticity, and process adherence throughout manufacturing and assembly. The inspection and certification activities must be conducted by qualified independent entities capable of delivering accurate, auditable results aligned with aerospace and defense industry norms. This subcontract is issued by the DLA Fleet Readiness Center DLA PSC under NAICS code 541690, with performance required at Cherry Point, North Carolina, ZIP 28533-0021. The opportunity was posted on July 20, 2026, and responses are due by July 28, 2026. While no set-aside classification is specified, the contract is intended for qualified subcontractors with demonstrated expertise in military-grade component inspection and certification. All participants must be prepared to meet rigid documentation and reporting standards to support DLA’s mission of maintaining high-reliability supply chain integrity.
Other Scientific and Technical Consulting Services

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 488510
New
DIBBS
Domestic and International Freight & LogisticsThe contract pertains to the domestic and international transportation of packaged doublers to their final destination, requiring strict adherence to DFARS 252.247-7023 provisions governing transportation and logistics for defense-related cargo. All shipments must be properly documented through the Wide Area Workflow system to ensure traceability and compliance with Department of Defense procurement standards. The contractor is responsible for managing all logistics functions, including potential customs clearance procedures for international movements, ensuring timely and secure delivery without disruption to the supply chain. Performance is mandated at Cherry Point, North Carolina, with the full scope encompassing both domestic and global freight operations under a subcontract arrangement. The solicitation falls under NAICS code 488510 for other support activities for air transportation, targeting qualified logistics providers capable of handling sensitive defense materials. The opportunity was posted on July 20, 2026, with responses due by July 28, 2026, and is administered by the DLA Fleet Readiness Center under the Department of Defense. Though the specific contracting office details are not provided, the place of performance is fixed at Cherry Point, and all parties must be prepared to meet rigorous compliance, documentation, and delivery timelines aligned with DLA protocols.
Freight Transportation Arrangement

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging and Marking ServicesThe contract requires comprehensive packaging, labeling, and Unique Item Identifier (UID) marking services for fabricated doublers, all performed in strict accordance with MIL-STD-129 for military packaging and MIL-STD-130N for item identification and UID marking standards. The work must fully comply with Defense Logistics Agency (DLA) logistics protocols to ensure traceability, inventory accuracy, and readiness for military distribution systems. All packaging must withstand transportation and storage conditions while maintaining labeled integrity throughout the supply chain, with UID data accurately registered in the DLA's Global Data Synchronization Network. Performance is to be executed at the specified location in Cherry Point, North Carolina, with a response deadline of July 28, 2026. The contract is classified as a subcontract under NAICS code 561910 for other support services, and the procuring activity is the DLA Fleet Readiness Center DLA PSC under the Department of Defense. No set-aside provisions are designated, and participation is open to qualified contractors capable of meeting the rigorous military standards for identification, labeling, and packaging without deviation. All deliverables must be verified for compliance prior to acceptance by the contracting authority.
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332812
New
DIBBS
Precision Aerospace Machining and FabricationThe contract calls for the manufacture of three precision-machined doubler components per NSN 1560-LL-NCB-5318 and associated Bell Textron part numbers, requiring full lifecycle production from material sourcing through final inspection. All work must adhere to strict aerospace industry standards, encompassing CNC machining, heat treatment, and comprehensive quality verification to ensure structural integrity and compliance with defense specifications. The components are critical to airframe assembly and must be produced under rigorous quality control protocols suitable for military aviation applications. Performance is required at Cherry Point, North Carolina, 28533-0021, with the Department of Defense through the DLA Fleet Readiness Center serving as the contracting authority. The solicitation is classified as a subcontract under NAICS code 332812, indicating it targets precision machining and fabricated metal product manufacturing. Offers must be submitted by the response deadline of July 28, 2026, with no set-aside provisions specified, meaning all eligible vendors may compete. The contract is posted on the DIBBS platform and is part of a broader effort to maintain operational readiness through targeted, high-precision component acquisition.
Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

1 day ago

DEADLINE

in 7 days
View Details