This Government Contract opportunity from Department Of Defense was posted on December 18, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Drag Arm Winch Replacement for Dredge Murden

Closed

Federal

Submission Closed01/02/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333923

New

Federal

Executive Desk SupplyThis subcontract with the Department of Defense involves the supply and delivery of one high-end executive desk crafted from solid dark walnut hardwood. The item is intended for prime contractors on US Air Force projects and will be delivered to the 704 MUNSS HQ Building located in Ghedi. The procurement is managed under CLIN 0001 and requires strict adherence to FAR 52.212-4 commercial standards. Delivery personnel must comply with DFARS 252.204-7004 Anti-terrorism Awareness Training to facilitate transport to the overseas site. The opportunity was posted on September 4, 2026, with a response deadline of September 14, 2026. The contract falls under NAICS code 333923 and is administered by agency FA5682 31 Cons.

FA5682 31 Cons (unit 6102)

POSTED

DEADLINE

Supply of Crane Load LevelerThis subcontract involves the manufacture or sourcing of one Crane Load Leveler for prime contractors supporting DLA Troop Support equipment contracts. The item must be produced in accordance with NSN 3950-01-685-2492 and adhere to all DLA master technical and quality requirements. Packaging must comply with MIL-STD-2073-1E and RP001 standards. The delivery is set as FOB Origin and must be completed within 20 days of the order. This requirement is managed under NAICS code 333923 for the Department of Defense, with a response deadline of September 14, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-380W

This contract is for the procurement of two piston accumulators, identified by NSN 2030-01-214-8271 and Parker-Hannifin part number 810338. The items are designated as critical application items and must be permanently stamped with OIL and GAS at the appropriate ends. The agreement specifies a delivery timeframe of 146 days after order, with a required delivery date of September 25, 2026, shipping FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards per MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be managed through sampling methods aligned with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Additionally, the contract prohibits the intentional use of mercury or mercury-containing compounds in the hardware, preservation, or packaging.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE8EE-26-T-2523

This solicitation, identified as SPE8EE-26-T-2523, is issued by the Department of Defense for the procurement of one crane load leveler under NSN 3950-01-685-2492. The requirement falls under NAICS code 333923 and is managed by the Construction and Equipment Manufacturing and Construction agency. The delivery timeline is specified as 20 days after receipt of order. The contract adheres to DLA master technical and quality requirements, specifically incorporating packaging standards under RP001 and the removal of government identification from non-accepted supplies under RQ011. Interested parties must respond by the deadline of September 14, 2026, with Philip Ferrara serving as the primary point of contact for this federal acquisition.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EE-26-T-2392

This solicitation, numbered SPE8EE-26-T-2392, is for the procurement of one Fairlead Sheave under National Stock Number 3950-01-701-4712. The contract is issued by the Department of Defense through the Defense Logistics Agency and requires delivery within five days after receipt of order. The place of performance is designated as FPO 09564. Crucially, this item contains technical data subject to ITAR and EAR export controls, meaning it cannot be exported or disclosed to foreign persons without prior authorization from the Department of State or Commerce. Eligible contractors must possess an approved US/Canada Joint Certification Program certification, complete specific DOD export-control training and questionnaires, and receive approval from the DLA controlling authority to access the necessary technical data.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EE-26-T-2524

This contract, identified as SPE8EE-26-T-2524, is a total small business set-aside for the procurement of eight pallet slings under NSN 3940-00-627-9603. The agreement specifies a delivery timeframe of 144 days, with a required delivery date of December 21, 2026, and a need ship date of August 17, 2026. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements, including CMMC Level 2 self-assessment and DLA packaging standards. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and the contractor must ensure that no mercury or mercury-containing compounds are intentionally added to the hardware. All marking and palletization must comply with MIL-STD-129 and RP001 requirements.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Service Alberta and Red Tape Reduction - Request for Quotes - SNOWCAT HOIST

Solicitation # AB-2026-05281

Service Alberta and Red Tape Reduction is seeking quotes from qualified manufacturers, distributors, or authorized resellers for the supply, delivery, installation, testing, and demonstration of one Snowcat Hoist. The equipment will be located at the Canmore Nordic Centre Provincial Park Maintenance Shop and must adhere to specific requirements regarding capacity, hydraulic lift capabilities, dimensions, safety certifications, and a four-post drive-through configuration. Interested proponents must submit all mandatory compliance documentation, warranty details, and authorization materials through the Alberta Purchasing Connection. The solicitation, identified as AB-2026-05281, was posted on September 3, 2026, with a response deadline of September 8, 2026. Primary inquiries should be directed to Senior Procurement Officer Adeola Olayiwola.

Service Alberta and Red Tape Reduction

POSTED

DEADLINE

Tower Erection & Structural InstallationThis subcontract, titled Tower Erection and Structural Installation, is a total small business set-aside for the Department of Defense under the W7NC Uspfo Activity Meang 101 agency. The project involves the physical erection and structural installation of six 100-foot monopole towers at a US Air Force facility in Bangor. The contractor is responsible for hoisting and securing tower sections, torqueing bolts to specific requirements, and ensuring the verticality and stability of each structure using cranes, rigging, and specialized hoisting equipment. All operations must strictly adhere to OSHA safety standards for crane operations and tower climbing. The solicitation was posted on September 3, 2026, with a response deadline of September 15, 2026. The work falls under NAICS code 333923 and is designed to support prime contractors in the delivery of fully installed structural towers.

W7NC Uspfo Activity Meang 101

POSTED

DEADLINE

NOTICE OF INTENT TO NEGOTIATE A SOLE-SOURCE CONTRACT

Solicitation # 140802-26-0504

The National Oceanic and Atmospheric Administration is seeking to acquire four RPC-90X-C-SA-MEA-REN Rugged Programmable Control Displays from Rugged Controls LLC. These panel-mount units are essential for providing accurate winch wire tension and location data for underwater packages, which is critical for mission science, personnel safety, and safe vessel navigation. Because these displays are the current replacement for legacy systems used across the NOAA fleet, they allow for installation with minimal changes to existing mounting and training requirements. The government intends to negotiate this as a sole-source contract under FAR Part 13 and Part 12, as Rugged Controls is the original equipment manufacturer with proprietary rights to the design. While the intent is to negotiate directly with the OEM, the government will consider statements of capabilities from other interested parties that can prove their ability to provide the specific equipment without causing compatibility or installation issues. All capability statements and pricing must be submitted by September 10, 2026.

Department Of Commerce Noaa

POSTED

DEADLINE

INVITATION TO BID FOR AERIAL WORK PLATFORM

Solicitation # PR16093309

The US Embassy in Monrovia, under the Department of State, is soliciting bids for the procurement of one Spider 54T diesel-engine, self-propelled tracked aerial work platform or a functional equivalent. The equipment must feature a telescopic boom and jib, rugged tracks for outdoor traction, anti-collision conductive rubber on the aerial basket, an emergency electric lowering pump, and a fabric weather protection cover. Additionally, the contractor must provide three helmets with interphone devices for ground communication and a manufacturer-approved technical maintenance and repair training session in Monrovia for two auto technicians. A recommended list of maintenance and replacement parts must be provided and priced as a separate line item. The contract will be awarded to the lowest priced, technically acceptable offer, with evaluation factors including technical specifications, financial capability, past performance, and valid SAM registration. Delivery is required at the American Embassy in Monrovia within 270 days of the purchase order receipt, with payment terms set at net-30 days. Offerors must comply with FAR clauses regarding covered telecommunications equipment and maintain current UEI and CAGE codes. The final deadline for the submission of offers is September 9, 2026, and all proposals should be submitted via email to MonroviaBids@state.gov.

POSTED

DEADLINE

Supply of Crane Dial Weight Indicators

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Supplier of Stroke Control Assembly (Windless)This subcontract involves the supply of two Windless Stroke Control Assemblies, specifically Lake Shore Systems P/N 2C2-144-2 and NSN 3950011737720, for prime contractors supporting DLA Troop Support procurement projects. The selected supplier must possess a valid CAGE code and ensure all items are packaged in strict accordance with RP001 DLA Packaging Requirements for Procurement. The project falls under NAICS code 333923 and is managed by the Department of Defense. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by the deadline of September 14, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

6 days ago

DEADLINE

in 6 days

General Info

Agency

Department Of Defense → Endist WilmingtonView Agency

NAICS

333923 - Overhead Traveling Crane, Hoist, and Monorail System ManufacturingView NAICS

Place of Performance

Wilmington, NC, USA

Set-Aside

NONE

Documents

This scope was carved out of PANSAD26P0000029566.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Notice of Intent to Solicit and Award a Sole Source

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedDec 18

subcontract

Response DeadlineJan 2

Deadline has passed

Submission Closed

01/02/2026, 09:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Endist Wilmington

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Endist Wilmington

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Supply of one direct drop-in replacement Drag Arm Winch for the USACE Dredge Murden, requiring exact form, fit, and function compatibility with no vessel modifications.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS