Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

DRESSING, CHEST SEAL WO

Active
SPE2DS-26-T-283JFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The chest seal dressing is a specialized medical device designed for rapid deployment in trauma scenarios involving open chest wounds. It features a three-channel pressure relief vent system that prevents air from entering the chest cavity during inhalation while allowing trapped air and blood to escape during exhalation, reducing the risk of tension pneumothorax. The design includes a fail-safe mechanism ensuring functionality even if two of the three vents become obstructed. The dressing utilizes advanced adhesive technology to maintain a secure seal under extreme environmental conditions and is equipped with a large red-tipped pull tab for single-step peel-and-apply application, enabling easy repositioning or venting if needed. It is packaged in a foil pouch with tear-notches, measuring 7.75 inches square when undeployed, and expands to a 6-inch by 6-inch coverage area upon application. Each unit weighs 1.37 ounces and is issued individually. The product must have a shelf life of 60 months with no extensions permitted, and no more than nine months may have elapsed from the manufacturer’s production date to delivery to the government. Labeling must comply with Medical Marking Standard No. 1, including clear indications of the date of manufacture, expiration or retest date, contract number, and lot number. Packaging must meet commercial standards, with each unit sealed in a protective container and shipped in appropriate exterior packaging to ensure safe transit at the lowest feasible cost. All packaging and marking must conform to DLA requirements, superseding older military standards. The item is identified by NSN 6510-01-624-0840, with a purchase request for two units under contract SPE2DS-26-T-283J, requiring delivery within 20 days to Fort Bragg, North Carolina. Bidders must specify their source and part number, and all technical specifications referenced are governed by the DLA Master List of Technical and Quality Requirements.

General Info

Chest seal dressing with three-channel vent, 60-month shelf life, 20-day delivery to Fort Bragg, NSN 6510-01-624-0840.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

456199 - All Other Health and Personal Care RetailersView NAICS

Place of Performance

5234 EAGLE TALON DR BLDG X3063, FORT BRAGG, NC, 28310, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
Marc Canalichio
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DRESSING,CHEST SEAL WOUND
DRESSING, CHEST SEAL WOUND
CHEST SEAL DRESSING; 3-CHANNEL PRESSURE RELIEF VENTS;
3-VENT CHANNELS THAT PREVENT AIRFLOW INTO THE CHEST
CAVITY DURING INSPIRATION WHILE ALLOWING AIR TO ESCAPE
THROUGH THE VENT CHANNELS DURING EXHALATION; VENT CHANNELS
ALLOW BLOOD TO ESCAPE AND PROVIDES A BACKUP FAIL-SAFE
SYSTEM EVEN IF TWO OF THE THREE CHANNELS BECOME OBSTRUCTED,
THE VENT WILL REMAIN FULLY OPERATIONAL; ADVANCED ADHESIVE
TECHNOLOGY FOR A SUPERIOR SEAL IN THE MOST ADVERSE CONDITIONS;
EASY-TO-GRIP, LARGE RED-TIP TAB FOR SINGLE STEP, PEEL-AND-APPLY
APPLICATION ALLOWS FOR BURPING OF THE WOUND IF NECESSARY;
FOIL PACKAGE WITH RED-TIP TEAR NOTCHES;
PACKAGE: 7.75 IN BY 7.75 IN; CHEST SEAL SIZE WHEN
DEPLOYED: H 6 IN BY W 6 IN; WEIGHT: 1.37 OZ
UNIT OF ISSUE: EACH
..
SHALL HAVE A SHELF LIFE OF 60 MONTHS.
NOT MORE THAN 9 MONTHS SHALL HAVE ELAPSED FROM
DATE OF MANUFACTURER TO DATE OF DELIVERY TO THE
GOVERNMENT.
.
SHELF LIFE MARKINGS SHALL BE IN ACCORDANCE WITH
THE LATEST REVISION OF MMS1A.
.ALL LABELS SHALL INCLUDE:
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
DATE OF MANUFACTURER, EXPIRATION, OR RETEST DATE CONTRACT NUMBER/LOT NUMBER. ..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RS023: Shelf-life requirement RS001 for a TYPE I (CODE S) item with a shelf life of 60 months (non-extendable) applies to this item.
,,
SPE2DS-26-T-283J
SECTION B
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6510-01-624-0840 Quantity: 2 EA Purchase Request: 7017653886QTY: 2 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 456199
New
DIBBS
SPONGE, SURGICAL
Solicitation # SPE2DS-26-T-281T
The product is a pediatric surgical sponge measuring 24 inches by 38 inches, designed for use on partial to full thickness wounds and first to second degree burns. It is a multi-layered, sterile, non-permeable dressing with a high-density polyethylene outer and wound contact layer, an anti-shear layer of the same material, and inner layers composed of a highly absorbent rayon and cellulose blend. The dressing is engineered to wick exudate away from the wound site throughout the entire padding, thereby reducing the frequency of dressing changes and minimizing the risk of tissue maceration and irritation. Each case contains 24 units, sold as a box of 24, and is labeled to meet strict government specifications. The item has a fixed 36-month shelf life with no extension permitted, and delivery to the government must occur within five months of the manufacturer’s date. Labeling must include the manufacturer date, expiration or retest date, contract number, and lot number in compliance with MMS1A standards. The product falls under NSN 6510-01-630-8705, with a procurement quantity of two boxes and a delivery deadline of 20 days after award. Packaging must comply with DLA requirements, and all supplies must be free of government identification prior to delivery. The solicitation, issued under SPE2DS-26-T-281T, is governed by DLA’s Master List of Technical and Quality Requirements, and the point of contact is Mary-Kathryn Donahue of the Department of Defense’s Medical Supply Chain.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 456199
New
DIBBS
POINT, ENDODONTIC
Solicitation # SPE2DH-26-T-5606
This contract pertains to the procurement of POINT ENDODONTIC GUTTA PERCHA POINTS, specifically model 120S, which are color-coded, assorted in sizes 45 to 80, and measure 30 millimeters in length, supplied in boxes of 120 units each. The item is identified by NSN 6520-01-643-3521 and is being requested in a single box quantity under purchase request 7017649745, with a delivery requirement of 20 days ADO. The solicitation, issued under number SPE2DH-26-T-5606, was posted on July 28, 2026, with proposals due by August 4, 2026, and falls under NAICS code 456199 for other health care services. The contracting authority is the Department of Defense, through the Medical Supply Chain FSH, with delivery to APO 09094-3219. All supplies must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. Covered defense information may apply, and bidders must specify the source and part number being offered. Government identification must be removed from non-accepted supplies, and bids must be submitted with full product details to meet procurement compliance.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 456199
New
DIBBS
LUBRICANT, SURGICAL
Solicitation # SPE2DP-26-T-4350
Surgical lubricant, sterile, latex-free, water-soluble jelly containing parabens, is supplied in foil packets of 2.7 grams each, with a unit of issue being a box of 144 packets. The product is regulated by the FDA and must be stored at 20° to 25°C (68° to 77°F). It has a non-extendable shelf life of 36 months as a TYPE I (CODE Q) item. Packaging and marking must strictly comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all units must be sealed in commercial containers that protect against damage and ensure safe delivery via common carrier at the lowest cost. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract. The item is manufactured by MEDLINE INDUSTRIES, LP under part number MDS032273H and is identified by NSN 6505016265774. The contract specifies delivery within 20 days FOB destination, with zero variance allowed on quantity, inspection and acceptance occurring at the delivery point. Two separate CLINs are listed for the same NSN with different purchase request numbers and required delivery dates of July 30 and July 31, 2026. Packaging data follows MIL-STD-2073-1E, and hazardous material shipping procedures must be observed. Parcel post and freight shipping addresses are provided for APO AE and RAMSTEIN, Germany, respectively. Buyers must submit referrals via EBS including manufacturer details, part number, and item description for confirmation. All documentation adheres to DoD authorized units of issue, and additional guidance is available through DLA Troop Support and public DLA portals.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 456199
New
DIBBS
FILTER ELEMENT, VENT
Solicitation # SPE2DS-26-T-281J
The contract specifies the procurement of HEPA filter elements for ventilators under solicitation SPE2DS-26-T-281J, with the NSN 6515-01-630-1354 and part number 28022 supplied by Teleflex Medical, CAGE 1SL40. The unit of issue is a box (BX), with each box containing 20 units, and four separate line items are listed for delivery to different U.S. and international military locations, including Joint Base Charleston, Hurlburt Field, Busan, and Daegu, each with distinct delivery deadlines ranging from June to July 2026. All units must be packaged in sealed containers meeting commercial standards to prevent damage, with exterior shipping containers ensuring safe, cost-effective transport by common carriers. Packaging must comply with ASTM D3951, but DLA’s Master List of Technical and Quality Requirements takes precedence, overriding other standards. Importantly, medical marking must follow Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all items must be labeled accordingly using the specified marking system. Delivery is FOB destination with zero tolerance for quantity variance, inspection and acceptance occurring at the destination. Shipping must be via traceable means, explicitly prohibiting parcel post, and includes detailed freight and military postal addresses for each recipient. The contract also references specific logistics protocols, including palletization requirements under RP001 and special marking codes, while emphasizing that all technical and quality provisions from the DLA Master List apply and govern procurement execution.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 456199
New
DIBBS
PORCELAIN REPAIR KI
Solicitation # SPE2DH-26-T-5580
The porcelain repair kit contains a complete set of dental restoration materials including six 1.2 mL syringes of specialized agents—Permaflo Dentin Opacifier, EtchArrest, OpalDam, Peak Universal Bond, Porcelain Etch, and Ultradent Silane—along with eighty applicator tips in four varieties: twenty black mini brush tips, twenty black micro tips, twenty micro 20 GA tips, and twenty inspiral brush tips. All components are packaged as a single unit designated as a kit and must meet stringent medical marking standards per MMS No. 1, replacing MIL-STD-129. The kit must have a shelf life of eighteen months, with no more than three months elapsed between manufacture and government delivery, and all packaging must include clear markings for date of manufacture, expiration or retest date, and contract or lot number in accordance with the latest MMS1B revision. Packaging must ensure protection from damage during shipping and comply with commercial standards for both domestic and export transport at the lowest acceptable rate. The supply is governed by contract SPE2DH-26-T-5580, has a NSN of 6520-01-577-8543, and is subject to medical acquisition rules including technical requirements from the DLA Master List. Bidder submissions must specify the source and part number, and delivery must occur within five days of order award to Suffolk, Virginia.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 456199
New
DIBBS
CATHETER AND NEEDLE UN
Solicitation # SPE2DS-26-T-276W
The contract specifies the procurement of a catheter and needle unit for intravenous use, designated as a decompression device for pneumothorax with a 14-gauge by 3.25-inch stainless steel needle and a radiopaque, latex-free F.E.P. polymer catheter, all sterile and disposable. Each unit must have a shelf life of 60 months with no more than nine months elapsed from the date of manufacture at the time of delivery. The item is identified by NSN 6515-01-626-7948 and is to be delivered in quantities of 20 units, with a fixed unit price of $20.00 and total contract value of $400. Delivery is required FOB destination within 20 days of the contract award, with zero tolerance for quantity variance. Packaging must comply with DLA packaging requirements, adhering strictly to Medical Marking Standard No. 1, superseding MIL-STD-129, and conforming to ASTM D3951 only where not overridden by DLA technical mandates. All units must be sealed in protective containers and shipped in commercial exterior packaging suitable for safe transport via common carrier at the lowest cost to Fort Bragg, North Carolina. Shipping must be traceable, excluding parcel post, and all markings must align with the DLA master list of technical and quality requirements. The item is assigned to the 3D SFG SSA AWCF SSF at Fort Bragg under contract SPE2DS-26-T-276W, with a required delivery date of July 29, 2026. The supplier is Altitude Technologies Inc., part number 02152, and the product is governed by DLA’s procurement framework for medical acquisitions.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 456199
New
DIBBS
LEVOFLOXACIN TABLETS
Solicitation # SPE2DP-26-T-4299
Levofloxacin tablets are supplied in bottles containing 20 tablets each, with each tablet delivering 750 mg of the active ingredient, and are marked for prescription use only. The product has a total shelf life of 24 months, with a mandatory minimum of 21 months remaining at the time of receipt by the first government activity. Storage must be maintained at controlled room temperature between 20 to 25 degrees Celsius (68 to 77 degrees Fahrenheit), per USP guidelines. Labeling requirements include the National Stock Number, manufacturer name, date of manufacture, expiration or retest date, contract number, and lot number, all in compliance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must meet commercial standards ensuring protection from damage, with exterior shipping containers suitable for safe delivery via common carrier at the lowest cost to the designated destination at Fort Stewart, Georgia. The unit of issue is a bottle (BT), and the contract specifies a quantity of 2 bottles. Delivery is due within 20 days of order placement, FOB destination, with no quantity variance permitted. The material is not classified as hazardous under Fed-Std-313 and must be commercially packaged in accordance with ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence. Shipment must be sent by the fastest traceable means, excluding parcel post. The contract is issued under solicitation SPE2DP-26-T-4299 with a required delivery date of July 28, 2026, and is procured by the Department of Defense through the Medical Supply Chain Pharmaceutical FSA.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 456199
New
DIBBS
TETRACAINE HYDROCHLORI
Solicitation # SPE2DP-26-T-4317
Tetracaine Hydrochloride Ophthalmic Solution is a sterile, topical anesthetic formulated at 0.5% concentration in 5 mL bottles, intended exclusively for producing surface anesthesia of the eye. The product is regulated by the FDA and must be stored at room temperature between 15–30°C (59–86°F) and protected from light; it must not be used if the solution appears cloudy, discolored, or contains crystals. The total shelf life is 24 months, with a mandatory minimum of 21 months remaining at the time of receipt by the first government activity. Packaging and labeling must comply with Medical Marking Standard No. 1A dated February 4, 2013, superseding all references to MIL-STD-129, and all units must be commercially packaged in sealed containers to prevent damage or breakage during transport. The unit of issue is a bottle (BT), with each bottle containing 5 mL of solution. The contract specifies three separate delivery quantities totaling 20 bottles across three delivery points at Fort Bragg, North Carolina, with all shipments required to be delivered FOB destination within five days and without any quantity variance. Shipments must be sent by traceable means and exclude parcel post. The material is not classified as hazardous under FED-STD-313, so it must be packaged according to ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence over any commercial standards. Palletization must adhere to DLA Packaging Requirements for Procurement RP001. The contract references specific manufacturer part numbers and NDC codes from AmerisourceBergen Drug Corp and Bausch & Lomb Incorporated. All packaging and labeling must include the correct government identification as required and reflect the specified NSN: 6505-01-641-4148, with an original required delivery date of July 29, 2026.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 456199
New
DIBBS
TAPE, SEALING, STERILIZA
Solicitation # SPE2DH-26-T-5453
The tape is a sterilization indicator designed for sealing applications in steam sterilization environments, featuring a nominal width of 0.7 inches and a length of 60 yards, with a pressure-sensitive adhesive that activates upon exposure to steam under appropriate conditions. The tape displays a preprinted design with equal diagonal lines that indicate proper sterilization activation, and each package contains 28 units totaling 18 millimeters by 55 meters of tape. It is classified as a Type I (Code K) item with a strict non-extendable shelf life of 18 months, and no more than three months may have passed from the date of manufacture to the date of delivery to the government. Each unit must be properly sealed in a protective container, and all packaging must comply with commercial standards and the Medical Marking Standard No. 1, which supersedes MIL-STD-129. Labels on the product must clearly indicate the NSN, manufacturer, CAGE code, date of manufacture, expiration or retest date, contract number, and lot number. The tape is subject to DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, and the item is governed by the procurement document SPE2DH-26-T-5453 with a delivery deadline of 20 days after order award. The item is for federal medical supply acquisition, with performance specified to occur in San Diego, California, and technical compliance must be verified through the DLA’s official resources.
MEDICAL SUPPLY CHAIIN FSH

POSTED

6 days ago

DEADLINE

in about 12 hours
View Details
NAICS: 456199
SLED
Hygiene Items - DOC-PE
Solicitation # 3000026478
The contract titled Hygiene Items - DOC-PE is a solicitation issued by the Louisiana Procurement agency under the state-level government entity, targeting the supply of hygiene-related products. The solicitation was posted on July 14, 2026, with a response deadline of July 28, 2026, at 4:00 PM Eastern Time, and is open to eligible responders under the SLED classification, indicating it is intended for state, local, or educational entities. There is no designated set-aside type or NAICS code provided, suggesting the opportunity is open to a broad range of vendors without specific small business or diversity targets. Performance of the contract will occur within the state of Louisiana, and the procurement is managed through the Louisiana Office of State Procurement. All inquiries and communications should be directed to the primary point of contact, the LaPAC Help Group, via email at doa-osphelpdesk@la.gov or by phone at 225-342-8010. Further details and participation instructions can be accessed through the official online portal linked in the contract data.
Procurement

POSTED

16 days ago

DEADLINE

in 5 days
View Details
NAICS: 456199
DIBBS
Supply of Respirator Cleaning Wipes for Wright-Patterson AFB
Defense Logistics Agency

POSTED

about 1 month ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339112
New
DIBBS
TUBE, TRACHEAL
Solicitation # SPE2DS-26-T-284P
The contract specifies the procurement of endotracheal tubes, 9mm, plastic, sterile, designated by NSN 6515-01-501-6090, with a quantity of two units. These tubes are designed for use in nasal and oral anatomy, featuring a high-volume, large-diameter cuff that ensures an effective seal while minimizing contact with the tracheal wall and reducing capillary restriction through a low-pressure design. The tapered cuff facilitates easier insertion and lowers the risk of herniation, making them suitable for both short- and long-term ventilation as well as routine surgical procedures. Each tube is individually packaged and available with a Murphy eye only. The items must comply with DLA packaging requirements and technical quality standards outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Bidders are required to specify the source and part number being supplied. The solicitation, identified as SPE2DS-26-T-284P, was posted on July 29, 2026, with a response deadline of August 4, 2026. The purchase request number is 7017267889, and delivery is required within 20 days of award. The contract falls under NAICS code 339112 and is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF. The place of performance is Raleigh, North Carolina, with a zip code of 27607-0000. Primary point of contact for the solicitation is Colin Owens, reachable via email at colin.owens@dla.mil or phone at 4457375800. The contract is part of a federal procurement process and requires adherence to all DLA technical and quality specifications without exception.
Surgical and Medical Instrument Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
FLASHLIGHT, EYE EXAM
Solicitation # SPE2DS-26-T-284C
The contract is for the procurement of four disposable, self-contained eye examination flashlights with a spot blue beam, identified by NSN 6515-00-185-9482 and purchase request 7017673965. The item is classified as a regulated medical device by the FDA, requiring confirmation from a product specialist prior to award, with bidders obligated to provide the manufacturer, part number, and source details. Packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and each unit must be sealed in a protective container, with shipping containers designed for safe, cost-effective delivery via common carrier to the designated destination. Delivery is required within 55 days FOB destination, with no variance permitted in quantity, and inspection and acceptance occur upon arrival. The delivery point is APO AE 09227-0000, with the physical freight destination in Kaiserslautern, Germany. All technical and quality requirements referenced under R and I numbers are governed by the DLA Master List, and the applicable revision is determined by the solicitation or award date. The contract was solicited under SPE2DS-26-T-284C, with responses due by August 4, 2026, and the required delivery date set for July 29, 2026.
Surgical and Medical Instrument Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CONTROL, GLUCOSE
Solicitation # SPE2DS-26-T-283Y
The contract specifies the procurement of Prodigy Glucose Control Solution, Low Level 1, in 4 mL units, compatible with all Prodigy brand glucose meters and intended solely for in vitro diagnostic use. The product must have a guaranteed shelf life of 24 months, with no more than three months elapsed from the date of manufacture to the date of delivery to the government. Storage must be at room temperature and freezing is strictly prohibited. The solution is regulated by the FDA and must be sourced from approved manufacturers, specifically Prodigy Diabetes Care LLC or Cardinal Health 200, LLC, with their designated part numbers. All packaging and labeling must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and adhere strictly to DLA’s Packaging Requirements for Procurement, with commercial packaging in accordance with ASTM D3951 unless otherwise overridden by DLA's technical requirements. The unit of issue is each, and packaging must protect against damage and ensure safe transport via common carriers at the lowest possible rate. The contract includes two line items totaling two units, each priced at $2.00 and $4.00 respectively, with firm fixed prices and zero tolerance for quantity variance. Delivery is required within five days of order placement, FOB destination, with inspection and acceptance occurring at the point of delivery. Shipments must use the fastest traceable means and are prohibited from using parcel post. Two distinct delivery addresses are specified: one at Fort Bragg, North Carolina, and another in Melrose, Massachusetts, each with assigned tracking codes and logistical identifiers. The material is not classified as hazardous per Fed-STD-313 and must be labeled with the appropriate government identification, with strict compliance required for all packaging, marking, and palletization standards. The solicitation number is SPE2DS-26-T-283Y, with a response deadline of August 4, 2026, and required delivery dates set for July 30 and July 31, 2026, depending on the delivery point.
Surgical Appliance and Supplies Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
CUSHION, CRUTCH
Solicitation # SPE2DS-26-T-284Q
The contract pertains to the procurement of 300 pairs of sponge crutch cushions measuring 8 inches by 1.5 inches, identified by NSN 6515-00-777-7340, under solicitation SPE2DS-26-T-284Q. Bidders must specify the source and part number being supplied, and all supplies must comply with applicable technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date or award date depending on the acquisition type. Packaging must adhere to DLA packaging standards and the Medical Marking Standard No. 1, which replaces MIL-STD-129; each unit must be sealed in a protective container and packed in commercial shipping containers suitable for safe delivery via common carrier at the lowest cost to Fort Leonard Wood, Missouri. All medical acquisitions require commercial packaging, and government identification must be removed from non-accepted supplies. The solicitation was posted on July 29, 2026, with a response deadline of August 4, 2026, and delivery is required within 20 days of award. The contracting office is under the Department of Defense’s Medical Supply Chain, with Marcos Aliaga listed as the primary point of contact.
Surgical and Medical Instrument Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
TUBE, TRACHEAL
Solicitation # SPE2DS-26-T-283T
The contract specifies the procurement of 2 packages, each containing 10 individually packaged tracheal tubes, for a total of 20 units. Each tube is a nasal and oral tracheal tube with a Murphy design, featuring a cuff, a beveled tip, and is constructed of plastic polyvinyl chloride, with an inside diameter of 7 mm and a French size of 28. The tubes are sterile, disposable, and must have a minimum shelf life of 72 months from the date of manufacture, with no more than 10 months having elapsed between manufacture and delivery to the government. Packaging must comply with DLA requirements, and the item is governed by specific technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements. The purchase is tied to NSN 6515-01-047-5368 under solicitation SPE2DS-26-T-283T, issued by the Department of Defense’s Medical Supply Chain for the Nellis Air Force Base location. The response deadline is August 4, 2026, with a required delivery within five days of award, and the point of contact is Chandler Alvarez of DLA.
Surgical and Medical Instrument Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
INTRODUCER KIT, CATH
Solicitation # SPE2DS-26-T-284W
The contract specifies the procurement of an Introducer Sheath Kit designed for use with an ER-REBOA catheter, containing a 7FR sheath with a .035 inch short guidewire, an 18G needle, a 30cc syringe, 50ml of 0.9 percent saline, a 5FR clamp, a number 11 stainless steel scalpel, and a 2-0 nylon suture with reverse cutting, 30 inches in length. The kit is identified by NSN 6515-01-663-2913 with a quantity of 2 KT, and a purchase request number of 7017663257, requiring delivery within five days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue or award date depending on acquisition size. Packaging must meet DLA standards, and all supplies must be free of government identification if not accepted. Bidders must clearly state the source and part number being offered. The solicitation number is SPE2DS-26-T-284W, posted on July 29, 2026, with responses due by August 4, 2026, under NAICS code 339113 for medical equipment manufacturing, administered by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance required in Williamsburg, Virginia, 23185-5830.
Surgical Appliance and Supplies Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
CATHETERIZATION KIT, UR
Solicitation # SPE2DS-26-T-283U
The contract specifies the procurement of a urethral catheterization kit, item NSN 6515016152124, packaged as a unit of issue (PG) containing ten individual kits. Each kit includes a 16 Fr Foley catheter with a 2000 mL anti-reflux valve bag, sterile drape, underpad, specimen container, five prep balls, povidone-iodine solution, gloves, a prefilled 10 cc sterile water syringe, forceps, and a prefilled 10 cc lubricant syringe. The product must have a mandatory 36-month shelf life, with no more than five months elapsed from manufacture to government delivery. All packaging must comply with DLA Packaging Requirements, including sealed unit containers for protection, commercial shipping containers for safe transport at the lowest rate, and precise labeling per Medical Marking Standard No. 1, superseding MIL-STD-129. The kits are regulated by the FDA and require confirmation through EBS referral. Shipments are destined for two locations: USS Delaware (SSN 791) in FPO AE and Fort Bliss, TX, with delivery required within five days and no quantity variance allowed. Delivery is FOB destination, with inspection and acceptance occurring upon arrival. Packaging must adhere to ASTM D3951 only where not overridden by higher-priority DLA technical requirements, and palletization must follow RP001. Freight must be shipped by traceable means, prohibiting parcel post, and markings must include NSN, manufacturer and CAGE codes, manufacture and expiration dates, contract number, and lot number. The contract covers two CLINs, both at $1.00 per unit, with a required delivery date of July 30, 2026.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
WOUND CLOSURE KIT, FACI
Solicitation # SPE2DS-26-T-283P
The Wound Closure Kit, Facial is a sterile, latex-free, disposable tray designed for facial wound closure procedures, containing essential instruments and supplies to facilitate healing by approximating wound edges. The kit includes four gauze sponges, one metal tissue forcep, one curved mosquito hemostat, one fine-point tissue scissors, one polybag with twist tie, one polylined towel, one polylined fenestrated towel, a pack of three iodophor PVP prep swabs, and one alcohol swab. It is packaged and supplied as a case of twenty units, with a mandated shelf life of eighteen months from the date of manufacture, none of which may have expired prior to delivery. No more than two months may have elapsed between the date of manufacture and the date of delivery to the government. The item is governed by specific technical and quality requirements detailed in the DLA Master List of Technical and Quality Requirements, and must comply with DLA packaging standards. The NSN is 6515-01-710-5754, with a purchase request number of 7017656207, and delivery is due within twenty days of award. The solicitation SPE2DS-26-T-283P was posted on July 29, 2026, with responses due by August 4, 2026, and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF team, with performance designated to APO 09094-3219. Bidders must specify their source and part number, and all supplies must adhere to government identification removal procedures for non-accepted items.
Surgical and Medical Instrument Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
COVER, ELECTRONIC THERM
Solicitation # SPE2DS-26-T-284J
The contract pertains to the procurement of disposable covers for electronic thermometer probes, designed to prevent breakage and cross-contamination, constructed from plastic and provided in units of 100 per package. The item is identified by NSN 6515-01-373-8659 with a quantity of one package and a delivery requirement of 20 days ADO. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue or award date, depending on the acquisition size. The product must adhere to DLA packaging standards and include removal of government identification from non-accepted supplies. The solicitation, issued under SPE2DS-26-T-284J, is open for bids until August 4, 2026, with responses directed to the Department of Defense's Medical Supply Chain MD Surg FSF, and performance is required at Norfolk, Virginia. Bidders must clearly state the source and part number being offered, and the item is classified under NAICS code 339112, indicating its origin in medical device and equipment manufacturing.
Surgical and Medical Instrument Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
SPHYGMOMANOMETER
Solicitation # SPE2DS-26-T-283R
The contract specifies the procurement of two aneroid adult sphygmomanometers with latex-free, durable construction featuring Gear-Free Durashock Technology and certified accuracy to within +/-3 mmHg. Each unit includes a one-piece large adult cuff sized for 12-inch arm circumference with a rotating 360-degree gauge that snaps directly into the cuff for quick changes and easy viewing from any angle. The device is designed to withstand a 30-inch drop, meeting AAMI’s shock resistance standards, and includes a premium inflation system for patient comfort. It comes with a five-year calibration warranty and is built for unmatched reliability through its integrated cuff-mounted design. The product is identified by NSN 6515-01-647-7257 and must be supplied as specified with no case. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, with packaging and supply handling subject to DLA protocols including the removal of government identification from non-accepted items. Bidders must clearly indicate their source and part number. The solicitation, issued under SPE2DS-26-T-283R, requires delivery within five business days to Melrose, Massachusetts, with responses due by August 4, 2026, and is managed by the Department of Defense’s Medical Supply Chain under the primary point of contact Vernon Stevenson.
Surgical and Medical Instrument Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
CRICOTHYROTOMY SET
Solicitation # SPE2DS-26-T-283X
The CRICOTHYROTOMY SET is a specialized medical kit designed for emergency airway access, containing a No. 10 disposable scalpel, a 6.0mm cuffed tracheotomy tube, a 4-inch tracheal hook, a 10 cc syringe, and a 5.5-inch curved Kelly hemostat, all provided as a single unit. The item is identified by NSN 6515-01-618-4558 with a quantity of one unit, subject to a 20-day delivery requirement under Purchase Request 7017653338. It is governed by strict technical and quality standards referenced in the DLA Master List, with applicability determined by the solicitation or award date. The item carries a non-extendable 18-month shelf life under RS013 requirements and must comply with DLA packaging standards under RP001. Government identification must be removed from non-accepted supplies per RQ011, and the kit is subject to covered defense information protocols under RD003. Bidders must clearly state the source and part number being offered. The solicitation, issued under SPE2DS-26-T-283X by the Department of Defense’s Medical Supply Chain, has a response deadline of August 4, 2026, and requires delivery to Fort Bragg, North Carolina, 28310.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 12 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
COVER, PROBE, THERMOM
Solicitation # SPE2DS-26-T-284D
The contract specifies the procurement of 10 boxes, each containing 100 disposable clear polyethylene digital oral thermometer sheaths, for a total of 1,000 units, under NSN 6515-01-503-5351 and manufacturer part number 20633 from TIDI PRODUCTS LLC. The item is a regulated medical device subject to FDA oversight, requiring buyer confirmation via EBS referral with full manufacturer and bidder details. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with packaging and marking mandated to comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129. All units must be sealed in individual commercial containers, packed in suitable shipping containers to ensure safe delivery, and marked in strict accordance with the specified standard. Delivery is FOB destination within 84 days, with no quantity variance permitted and inspection and acceptance occurring at the delivery point. The procurement follows DLA packaging guidelines and unit of issue standards, with the solicitation issued under SPE2DS-26-T-284D, response deadline August 4, 2026, and performance directed to APO 96260-5479.
Surgical and Medical Instrument Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 6 days
View Details