Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

INTRODUCER KIT, CATH

Active
SPE2DS-26-T-284WFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of an Introducer Sheath Kit designed for use with an ER-REBOA catheter, containing a 7FR sheath with a .035 inch short guidewire, an 18G needle, a 30cc syringe, 50ml of 0.9 percent saline, a 5FR clamp, a number 11 stainless steel scalpel, and a 2-0 nylon suture with reverse cutting, 30 inches in length. The kit is identified by NSN 6515-01-663-2913 with a quantity of 2 KT, and a purchase request number of 7017663257, requiring delivery within five days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue or award date depending on acquisition size. Packaging must meet DLA standards, and all supplies must be free of government identification if not accepted. Bidders must clearly state the source and part number being offered. The solicitation number is SPE2DS-26-T-284W, posted on July 29, 2026, with responses due by August 4, 2026, under NAICS code 339113 for medical equipment manufacturing, administered by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance required in Williamsburg, Virginia, 23185-5830.

General Info

Procure 2 kits of ER-REBOA introducer sheath with specified components, deliver in five days, NSN 6515-01-663-2913, solicitation SPE2DS-26-T-284W.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

CHEATHAM ANNEX, WILLIAMSBURG, VA, 23185-5830, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
ContactsNo contacts available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
ContactsNo contact information available

Full Description

Show more
INTRODUCER KIT,CATH
INTRODUCER SHEATH KIT, F/ER-REBOA CATHETER.
INTRODUCER SHEATH KIT<(>,<)>
7FR W/.035 INCH SHORT GUIDEWIRE
F/ER-REBOA CATHETHETER;
INCLUDES 18G NEEDLE, 30CC SYRINGE<(>,<)>
50ML 0.9 PERCENT SALINE, 5
FR CLAMP, NUMBER 11 SS SCAPEL<(>,<)>
AND 2-0 NYLON SUTURE REVERSE
CUTTING 30 INCHES.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
BIDDER: SHALL SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-663-2913 Quantity: 2 KT Purchase Request: 7017663257QTY: 7 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339113
New
DIBBS
SYRINGE, LABORATORY
Solicitation # SPE2DH-26-T-5613
The contract solicits 300 packages of 10 cc laboratory syringes, with each package containing 100 units, for a total of 30,000 syringes, under the NSN 6640-01-678-1647. Delivery is required within 85 days after award, and the purchase request number is 7017674629. The solicitation is issued under SPE2DH-26-T-5613, with a response deadline of August 5, 2026, and was posted on July 29, 2026. The National Industrial Classification System code is 339113, and the procurement is managed by the Department of Defense through the Medical Supply Chain FSH office, with performance located in New Cumberland, Pennsylvania, zip code 17070-5002. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and the applicable revision depends on whether the acquisition is simplified or large, with the controlling revision determined by the solicitation or amendment date. Packaging must comply with DLA packaging standards, and suppliers must remove all government identification from non-accepted supplies. Primary point of contact for inquiries is Tina Vu, reachable via email and phone provided.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 10 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
Federal
Lateral Flow Cassette Production & AssemblyThe contract requires the final production and assembly of exactly 2,000 lateral flow device kits according to a CDC-approved design, with full responsibility for quality validation and appropriate packaging to meet federal shipping standards. All work must be completed to ensure each kit is fully functional, properly labeled, and ready for direct shipment to the CDC in Atlanta, with the delivery location specified as ZIP code 30341. The production process must comply with all regulatory and technical specifications set forth by the CDC to guarantee consistency and reliability of the devices. This is a subcontract opportunity under NAICS code 339113, issued by the CDC Office of Acquisition Services within the Department of Health and Human Services. The solicitation was posted on July 29, 2026, and responses are due by 6:00 PM Eastern Time on August 18, 2026. There is no set-aside designation specified, and the contract does not identify a specific point of contact. All proposals must demonstrate capacity, quality control procedures, and logistical readiness to deliver the complete batch to the designated CDC facility in Atlanta by the required timeline.
CDC Office Of Acquisition Services

POSTED

about 15 hours ago

DEADLINE

in 20 days
View Details
NAICS: 339113
New
Federal
Specialized Accessories SupplyThe contract titled Specialized Accessories Supply seeks the provision of Miltenyi-compatible accessories including a carrying case, sample rack, and tube holder to support seamless integration with an existing main system. These components are essential for ensuring proper handling, storage, and operational efficiency of laboratory equipment within the target workflow. The solicitation is open for responses until August 3, 2026, and is classified as a subcontract under NAICS code 339113, indicating it pertains to medical equipment and supplies manufacturing. Performance is required at Bethesda, Maryland, with the National Institutes of Health under the Department of Health and Human Services as the contracting entity. All submissions must be prepared to meet exact technical specifications for compatibility and durability to ensure full functionality with the Miltenyi platform.
National Institutes Of Health Olao

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
Federal
36C255-26-AP-2895 FIS-007 Flexible Borescopes-SPS – Kansas City VAMC
Solicitation # 36C255-26-AP-2895
The Department of Veterans Affairs, through Network Contracting Office 15 in Leavenworth, Kansas, is proceeding with a sole-source procurement for Healthmark Industries’ FIS-007 Flexible Borescopes under FAR Part 12, which governs the acquisition of commercial products and services. The acquisition is justified under FAR 6.302-1 due to the proprietary and unique nature of the equipment, which is required for medical endoscopic operations at the Kansas City VA Medical Center in Missouri. The procurement is not open to competition, and no formal solicitation or evaluation factors will be issued; the award will be made directly to Healthmark Industries without competitive bids or scoring. The Contracting Officer is Teresa Cabanting, who can be contacted via email or phone for any inquiries, and responses to the notice must be submitted via email by July 30, 2026. The NAICS code has been updated to 339113 and the Product Service Code to 6515 to accurately reflect the nature of the item being procured, while all other details in the notice remain unchanged. The place of performance is clearly designated as the Kansas City VAMC, with the contracting office located in Leavenworth, Kansas. The contract details do not include pricing information, delivery schedules, inspection criteria, or packaging specifications, as the notice serves only as a pre-solicitation announcement of intent and not a formal request for proposals. No contract type is explicitly defined beyond the commercial item framework, and no contract administration data such as payment offices, accounting codes, or COR/COTR appointments are provided. Similarly, representations and certifications typically contained in Section K, including UEI, CAGE, or socioeconomic status, are absent from the documentation. Packaging, marking, bar-coding, and quality standards are not detailed in the notice and are presumed to be governed by the manufacturer’s commercial specifications under FAR Part 12. While no formal clauses or attachments are enumerated, the notice references an attached document containing additional procurement details, and all procedural compliance is based on the single-source determination authorized by federal acquisition regulations. The acquisition proceeds under the assumption that the FIS-007 Flexible Borescope is the only product capable of meeting the VA’s medical requirements, and no alternatives are considered viable.
255-NETWORK Contract Office 15 (36C255)

POSTED

about 15 hours ago

DEADLINE

in about 13 hours
View Details
NAICS: 339113
New
DIBBS
Sterile Iodoform-Impregnated Gauze Supply
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
Rigid Sea-Air Medical Evacuation Litter ManufacturingThe contract calls for the manufacture of two rigid sea-air medical evacuation litters designed to meet military specifications, featuring stainless steel or corrosion-resistant frames for durability in harsh environments. Each litter must be foldable and backpackable to enable rapid deployment and transport by medical personnel in maritime and airborne evacuation scenarios, with an orange coloration for high visibility. The litters are intended for use in challenging conditions where portability, strength, and resistance to corrosion are critical to mission success and patient safety. The solicitation is issued as a subcontract under the NAICS code 339113 for medical equipment manufacturing, with a response deadline of August 3, 2026, and a posted date of July 28, 2026. The place of performance is specified as Suffolk, Virginia, with the contracting activity managed by the Department of Defense through the Medical Supply Chain MD Surg FSF. All deliverables must align strictly with military standards, and the supplier is expected to deliver fully functional units that support immediate use in field medical evacuation operations.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
Sterile Surgical Sponge Manufacturing
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
Supply of Isolite Posterior Large Mouthpieces (Dental Isolation Devices)
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
Manufacture of FDA-Compliant Sharps Disposal Containers
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
Supply of HEPA Filter Elements for Ventilation SystemsThe contract calls for the manufacture and supply of high-efficiency particulate air filter elements designed for use in medical and military ventilation systems, where stringent air purification standards are required. These filters must meet exacting performance criteria to ensure the removal of airborne contaminants in critical environments such as hospitals, field medical units, and defense installations. The work is to be performed at Joint Base Charleston with a zip code of 29404, and the contract falls under the NAICS code 339113, which corresponds to medical equipment and supplies manufacturing. This is issued as a subcontract under the Department of Defense’s Medical Supply Chain initiative, indicating it supports the broader logistics and operational readiness of military and healthcare personnel. The solicitation was posted on July 28, 2026, with a strict response deadline of August 3, 2026, leaving a limited window for eligible vendors to submit proposals. There is no set-aside designated for small businesses or other categories, meaning all qualified suppliers may compete. The contract is administered under the agency name MEDICAL SUPPLY CHAIN MD SURG FSF, and all responses must be submitted via the DIBBS portal using the unique solicitation number SPE2DS26T281J. Failure to meet technical specifications, delivery timelines, or certification requirements for use in sensitive environments may result in disqualification or contract termination.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
Packaging, Labeling, and Barcoding ServicesThe contract entails the final packaging and labeling of complete medical kits to meet military standards, requiring precise application of National Stock Numbers, Contract Line Item Numbers, consignee details, and delivery point information alongside compliant 2D and linear barcodes. This work must adhere strictly to DoD specifications to ensure traceability, accountability, and seamless integration into military logistics systems. The effort is critical for operational readiness and must be executed with accuracy to avoid disruptions in the supply chain. The solicitation is designated as a subcontract under NAICS code 339113 for Medical Supplies and Equipment Manufacturing, issued by the Department of Defense through the Medical Supply Chain MD Surg FSF. The proposal window opens on July 28, 2026, with a firm deadline for responses on August 3, 2026. All work must be performed in alignment with military logistics requirements, though the specific place of performance and point of contact are not provided. Interested parties should access the full solicitation through the DIBBS portal to ensure full compliance with technical and procedural expectations.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
Gas Filter Assembly Manufacturing and Assembly
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339112
New
DIBBS
CUSHION, CRUTCH
Solicitation # SPE2DS-26-T-284Q
The contract pertains to the procurement of 300 pairs of sponge crutch cushions measuring 8 inches by 1.5 inches, identified by NSN 6515-00-777-7340, under solicitation SPE2DS-26-T-284Q. Bidders must specify the source and part number being supplied, and all supplies must comply with applicable technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date or award date depending on the acquisition type. Packaging must adhere to DLA packaging standards and the Medical Marking Standard No. 1, which replaces MIL-STD-129; each unit must be sealed in a protective container and packed in commercial shipping containers suitable for safe delivery via common carrier at the lowest cost to Fort Leonard Wood, Missouri. All medical acquisitions require commercial packaging, and government identification must be removed from non-accepted supplies. The solicitation was posted on July 29, 2026, with a response deadline of August 4, 2026, and delivery is required within 20 days of award. The contracting office is under the Department of Defense’s Medical Supply Chain, with Marcos Aliaga listed as the primary point of contact.
Surgical and Medical Instrument Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
TUBE, TRACHEAL
Solicitation # SPE2DS-26-T-283T
The contract specifies the procurement of 2 packages, each containing 10 individually packaged tracheal tubes, for a total of 20 units. Each tube is a nasal and oral tracheal tube with a Murphy design, featuring a cuff, a beveled tip, and is constructed of plastic polyvinyl chloride, with an inside diameter of 7 mm and a French size of 28. The tubes are sterile, disposable, and must have a minimum shelf life of 72 months from the date of manufacture, with no more than 10 months having elapsed between manufacture and delivery to the government. Packaging must comply with DLA requirements, and the item is governed by specific technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements. The purchase is tied to NSN 6515-01-047-5368 under solicitation SPE2DS-26-T-283T, issued by the Department of Defense’s Medical Supply Chain for the Nellis Air Force Base location. The response deadline is August 4, 2026, with a required delivery within five days of award, and the point of contact is Chandler Alvarez of DLA.
Surgical and Medical Instrument Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
CATHETERIZATION KIT, UR
Solicitation # SPE2DS-26-T-283U
The contract specifies the procurement of a urethral catheterization kit, item NSN 6515016152124, packaged as a unit of issue (PG) containing ten individual kits. Each kit includes a 16 Fr Foley catheter with a 2000 mL anti-reflux valve bag, sterile drape, underpad, specimen container, five prep balls, povidone-iodine solution, gloves, a prefilled 10 cc sterile water syringe, forceps, and a prefilled 10 cc lubricant syringe. The product must have a mandatory 36-month shelf life, with no more than five months elapsed from manufacture to government delivery. All packaging must comply with DLA Packaging Requirements, including sealed unit containers for protection, commercial shipping containers for safe transport at the lowest rate, and precise labeling per Medical Marking Standard No. 1, superseding MIL-STD-129. The kits are regulated by the FDA and require confirmation through EBS referral. Shipments are destined for two locations: USS Delaware (SSN 791) in FPO AE and Fort Bliss, TX, with delivery required within five days and no quantity variance allowed. Delivery is FOB destination, with inspection and acceptance occurring upon arrival. Packaging must adhere to ASTM D3951 only where not overridden by higher-priority DLA technical requirements, and palletization must follow RP001. Freight must be shipped by traceable means, prohibiting parcel post, and markings must include NSN, manufacturer and CAGE codes, manufacture and expiration dates, contract number, and lot number. The contract covers two CLINs, both at $1.00 per unit, with a required delivery date of July 30, 2026.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
WOUND CLOSURE KIT, FACI
Solicitation # SPE2DS-26-T-283P
The Wound Closure Kit, Facial is a sterile, latex-free, disposable tray designed for facial wound closure procedures, containing essential instruments and supplies to facilitate healing by approximating wound edges. The kit includes four gauze sponges, one metal tissue forcep, one curved mosquito hemostat, one fine-point tissue scissors, one polybag with twist tie, one polylined towel, one polylined fenestrated towel, a pack of three iodophor PVP prep swabs, and one alcohol swab. It is packaged and supplied as a case of twenty units, with a mandated shelf life of eighteen months from the date of manufacture, none of which may have expired prior to delivery. No more than two months may have elapsed between the date of manufacture and the date of delivery to the government. The item is governed by specific technical and quality requirements detailed in the DLA Master List of Technical and Quality Requirements, and must comply with DLA packaging standards. The NSN is 6515-01-710-5754, with a purchase request number of 7017656207, and delivery is due within twenty days of award. The solicitation SPE2DS-26-T-283P was posted on July 29, 2026, with responses due by August 4, 2026, and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF team, with performance designated to APO 09094-3219. Bidders must specify their source and part number, and all supplies must adhere to government identification removal procedures for non-accepted items.
Surgical and Medical Instrument Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
COVER, ELECTRONIC THERM
Solicitation # SPE2DS-26-T-284J
The contract pertains to the procurement of disposable covers for electronic thermometer probes, designed to prevent breakage and cross-contamination, constructed from plastic and provided in units of 100 per package. The item is identified by NSN 6515-01-373-8659 with a quantity of one package and a delivery requirement of 20 days ADO. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue or award date, depending on the acquisition size. The product must adhere to DLA packaging standards and include removal of government identification from non-accepted supplies. The solicitation, issued under SPE2DS-26-T-284J, is open for bids until August 4, 2026, with responses directed to the Department of Defense's Medical Supply Chain MD Surg FSF, and performance is required at Norfolk, Virginia. Bidders must clearly state the source and part number being offered, and the item is classified under NAICS code 339112, indicating its origin in medical device and equipment manufacturing.
Surgical and Medical Instrument Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
SPHYGMOMANOMETER
Solicitation # SPE2DS-26-T-283R
The contract specifies the procurement of two aneroid adult sphygmomanometers with latex-free, durable construction featuring Gear-Free Durashock Technology and certified accuracy to within +/-3 mmHg. Each unit includes a one-piece large adult cuff sized for 12-inch arm circumference with a rotating 360-degree gauge that snaps directly into the cuff for quick changes and easy viewing from any angle. The device is designed to withstand a 30-inch drop, meeting AAMI’s shock resistance standards, and includes a premium inflation system for patient comfort. It comes with a five-year calibration warranty and is built for unmatched reliability through its integrated cuff-mounted design. The product is identified by NSN 6515-01-647-7257 and must be supplied as specified with no case. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, with packaging and supply handling subject to DLA protocols including the removal of government identification from non-accepted items. Bidders must clearly indicate their source and part number. The solicitation, issued under SPE2DS-26-T-283R, requires delivery within five business days to Melrose, Massachusetts, with responses due by August 4, 2026, and is managed by the Department of Defense’s Medical Supply Chain under the primary point of contact Vernon Stevenson.
Surgical and Medical Instrument Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
CRICOTHYROTOMY SET
Solicitation # SPE2DS-26-T-283X
The CRICOTHYROTOMY SET is a specialized medical kit designed for emergency airway access, containing a No. 10 disposable scalpel, a 6.0mm cuffed tracheotomy tube, a 4-inch tracheal hook, a 10 cc syringe, and a 5.5-inch curved Kelly hemostat, all provided as a single unit. The item is identified by NSN 6515-01-618-4558 with a quantity of one unit, subject to a 20-day delivery requirement under Purchase Request 7017653338. It is governed by strict technical and quality standards referenced in the DLA Master List, with applicability determined by the solicitation or award date. The item carries a non-extendable 18-month shelf life under RS013 requirements and must comply with DLA packaging standards under RP001. Government identification must be removed from non-accepted supplies per RQ011, and the kit is subject to covered defense information protocols under RD003. Bidders must clearly state the source and part number being offered. The solicitation, issued under SPE2DS-26-T-283X by the Department of Defense’s Medical Supply Chain, has a response deadline of August 4, 2026, and requires delivery to Fort Bragg, North Carolina, 28310.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 10 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
COVER, PROBE, THERMOM
Solicitation # SPE2DS-26-T-284D
The contract specifies the procurement of 10 boxes, each containing 100 disposable clear polyethylene digital oral thermometer sheaths, for a total of 1,000 units, under NSN 6515-01-503-5351 and manufacturer part number 20633 from TIDI PRODUCTS LLC. The item is a regulated medical device subject to FDA oversight, requiring buyer confirmation via EBS referral with full manufacturer and bidder details. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with packaging and marking mandated to comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129. All units must be sealed in individual commercial containers, packed in suitable shipping containers to ensure safe delivery, and marked in strict accordance with the specified standard. Delivery is FOB destination within 84 days, with no quantity variance permitted and inspection and acceptance occurring at the delivery point. The procurement follows DLA packaging guidelines and unit of issue standards, with the solicitation issued under SPE2DS-26-T-284D, response deadline August 4, 2026, and performance directed to APO 96260-5479.
Surgical and Medical Instrument Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
CASE, DRUG, MAIN, SUPP
Solicitation # SPE2DS-26-T-283E
The contract specifies the procurement of a hard plastic drug case measuring 21.75L x 8H x 17.0W, with each unit including one lid insert and one case insert, offered as a single unit of issue. The item is not regulated by the FDA and must comply with commercial packaging standards as outlined in the procurement document, requiring each unit to be sealed in a container that protects against damage and is packed in suitable exterior shipping containers for safe delivery at the lowest carrier rate. All markings must follow Medical Marking Standard No. 1, which replaces MIL-STD-129, and copies of this standard are available through DLA Troop Support. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on the acquisition type. The supplier must provide the source and part number being offered, and the item is identified by NSN 6515-01-473-8678 and DLA part number 44000 from Fleming Industries Inc. The delivery is FOB destination with a strict five-day lead time and zero variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must conform to MIL-STD-2073-1E. The contract is issued under solicitation SPE2DS-26-T-283E, which incorporates defense information protocols under RD003 and requires compliance with DLA packaging and removal standards for non-accepted supplies. The unit price is set at $1.00 for a single unit, and the acquisition falls under NAICS code 339112, managed by the Department of Defense’s Medical Supply Chain. All data, including response deadlines and performance location in Melrose, Massachusetts, is tied to the electronic procurement platform, and the DoD authorized unit of issue must be referenced against the official ANSI X12 conversion guide.
Surgical and Medical Instrument Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 6 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Shipping & LogisticsThis contract requires the transport of packaged medical supplies via common carrier for both domestic and international destinations, with strict adherence to DLA and ASTM D3951 shipping standards to ensure compliance with military logistics protocols. The work involves handling sensitive medical cargo under regulated conditions, emphasizing secure, timely, and properly documented movement across supply chains supporting U.S. Department of Defense operations. The place of performance is designated as Fort Bragg with a zip code of 28310, indicating the primary operational hub for logistics execution and delivery coordination. The contract is classified as a subcontract under NAICS code 484220, which pertains to truck transportation of general freight, and is managed by the Medical Supply Chain MD SURG FSF under the Department of Defense. Solicitations must be submitted by the deadline of August 3, 2026, with the opportunity posted on July 28, 2026. Interested parties must ensure their capabilities align with federal shipping regulations, packaging specifications, and supply chain integrity requirements specific to medical materiel. Access to full solicitation details is available through the specified DIBBS portal link.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 424210
New
DIBBS
Packaging, Labeling, and Hazard Compliance ServicesThe contract requires compliant packaging, labeling, and hazard documentation for medical supplies in alignment with DLA, MMS No. 1, and DFARS standards, ensuring all materials meet military supply chain requirements. The work is tied to the Department of Defense’s Medical Supply Chain MD Surg FSF and is performance-based at Fort Bragg, North Carolina, with a zip code of 28310. This is a subcontract under the NAICS code 424210, indicating the scope involves wholesale trade of medical and surgical equipment. The opportunity was posted on July 28, 2026, with a strict response deadline of August 3, 2026, requiring timely submission of proposals to qualify for award. The contract is intended to support the secure, standardized, and safe distribution of critical medical items within defense operations.
Drugs and Druggists' Sundries Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
Surgical Stockinet Manufacturing and SupplyThe contract solicits the manufacture and supply of cotton surgical stockinet measuring 4 inches by 25 yards per roll, adhering strictly to DLA technical and quality standards. The product must meet specified medical-grade requirements for use in surgical settings, ensuring consistency, sterility, and performance under clinical conditions. The procurement is structured as a subcontract under the Department of Defense’s Medical Supply Chain, with Fort Bragg identified as the primary place of performance. Bids must be submitted by the deadline of August 3, 2026, following the release of the solicitation on July 28, 2026. The NAICS code 339112 classifies this as a medical device and equipment manufacturing activity, indicating the expectation for specialized production capabilities. All offerings must comply fully with federal supply chain regulations and quality assurances governing defense medical components, with no set-asides designated for small or disadvantaged businesses. The solicitation is accessible through the DIBBS portal and requires precise alignment with the agency’s operational and logistical needs.
Surgical and Medical Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details