This Solicitation opportunity from Government of Canada was posted on November 1, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Drilling and Monitoring Well Installation in Yellowknife

Closed

W0046-25-260International

Submission Closed11/01/2024, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 562910

New

Theatre Mold Remediation Scope of Work

Solicitation # AT25-0006

Solicitation AT25-0006 is a subcontracting opportunity with Adams and Associates, Inc. for comprehensive mold remediation at Theatre Building 1086 of the Atterbury Job Corps Center in Edinburgh, Indiana. The project was initiated following a sprinkler system failure that caused significant water damage. The scope of work requires the remediation of the entire building, including cleaning visible mold from CMU walls, concrete floors, and vinyl tiles, as well as the removal and replacement of affected drywall, gypsum wallboard, and acoustical tile ceiling finishes. Additionally, the contractor must clean or replace damaged theater seating cushions and perform dehumidification to maintain humidity levels at or below 50 percent. All work must adhere to ANSI/IICRC S520 standards, EPA guidelines, OSHA regulations, and the findings of the Micro Air Inc. Mold Testing report dated April 11, 2024. The contract is a single lump sum award based on best value, with evaluation weights distributed across price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Key requirements include the provision of a Certified Industrial Hygienist for verification and final clearance, a detailed remediation plan featuring HEPA filtration and negative air pressure, and compliance with Davis-Bacon Act wage determinations. Bidders must hold a valid Indiana Contractor's License and provide proof of automobile and workers compensation insurance, naming Adams and Associates, Inc. as an additional insured. Proposals must be submitted on company letterhead and include a detailed cost breakdown, a timeline for substantial completion, and a 90-day bid guarantee. Work must commence within 14 days of the Notice to Proceed, and payment is issued on Net 30 terms.

Atterbury Job Corps Center

POSTED

DEADLINE

Environmental Controls & Water Pollution Prevention

California Department of Transportation

POSTED

DEADLINE

The City of Columbus Department of Finance and Management in Ohio is seeking proposals for the Public Safety Facilities Remediation project located at 2077 Parkwood and 743 E Woodrow. This solicitation, identified as RFQ033899 under solicitation number 49621, falls under NAICS code 562910, which pertains to pollution remediation services. The opportunity was posted on October 29, 2026, and requires all responses to be submitted by the deadline of November 6, 2026, at 4:00 PM. Interested parties can find further details and submission guidelines through the Bid Express portal.

City of Columbus – Department of Finance and Management

POSTED

DEADLINE

OSM 11,65(0948,4371)101.1

Solicitation # 49586

The Pennsylvania Department of Environmental Protection is soliciting bids for the South Nanty Glo 2 Abandoned Mine Reclamation Project, located across Nanty Glo Borough and Jackson Township in Cambria County, as well as the Municipality of Murrysville in Westmoreland County. The project has an estimated value between 1,000,000 and 5,000,000 dollars and a performance term of 720 calendar days. A bid bond is required for submission. The scope of work focuses on extensive land reclamation and environmental stabilization. Key activities include the implementation of erosion and sediment pollution control plans, clearing and grubbing of 23.4 acres, and the grading of over 122,000 cubic yards of material. Technical requirements involve the installation of subsurface and chimney drains, the disposal of 44,073 cubic yards of coal refuse, and the supply and placement of 24,628 tons of coal ash. Additionally, the contractor will be responsible for planting nearly 10,000 tree seedlings, installing erosion matting, constructing a stilling basin, and building an access road.

Pennsylvania Department of Environmental Protection

POSTED

DEADLINE

Lead and Heavy Metals RemediationThis subcontract for Lead and Heavy Metals Remediation involves providing specialized abatement and control services for prime contractors on University of Washington facility projects. The scope of work includes manual and mechanical demolition, grinding, and torch cutting of copper panels and lead-painted supports. The selected contractor is responsible for the segregation of dangerous waste and must ensure all activities strictly adhere to WAC 173-303, 29 CFR 1926.62, and WAC 296-155-176. The primary deliverables for this engagement are the successful remediation of identified hazards and the provision of a documented compliance program. Interested parties must submit their responses by December 7, 2026. This opportunity falls under NAICS code 562910 and is managed through the University of Washington procurement system.

University of Washington

POSTED

DEADLINE

Asbestos Abatement and RemovalThis subcontract for Asbestos Abatement and Removal involves the removal and disposal of asbestos-containing materials for prime contractors working on University of Washington facility projects. The selected provider must adhere to Section 02 82 00 standards, manage composite materials according to WISHA Regional Directive 23.30, and ensure all workers are trained in compliance with WAC 296-62-07722(5). Post-impact cleanup must be performed using wet-wiping and HEPA-filter vacuums to ensure a safe environment. The contractor is responsible for delivering certified asbestos-free work areas and providing all necessary disposal manifests. This opportunity falls under NAICS code 562910, with a response deadline set for December 7, 2026.

University of Washington

POSTED

DEADLINE

Asbestos Abatement & Hazardous Material RemediationThis subcontract for Asbestos Abatement and Hazardous Material Remediation involves the mitigation and removal of asbestos, lead-based paint, and mold for prime contractors working on Texas Military Department facility projects. The scope of work requires the implementation of Lead Protocol and mold remediation according to project drawings, utilizing specialized containment systems and HEPA filtration to ensure safety and compliance. Contractors must hold valid lead and asbestos abatement certifications and adhere strictly to EPA and state environmental regulations. Key deliverables include the provision of certified clean site surfaces and the submission of all necessary disposal manifests. The response deadline for this opportunity is March 9, 2027.

Texas Military Department

POSTED

DEADLINE

Hazardous Material Spill Response Services

Holyoke Gas & Electric

POSTED

DEADLINE

Lead-Based Paint AbatementThis subcontract opportunity involves providing lead hazard control and abatement services for prime contractors working on City of Norwich rehabilitation projects. The selected contractor is responsible for implementing containment preparations and utilizing safety equipment to prevent contamination, ensuring all work adheres to HUD Lead Based Paint Hazard Control standards to deliver a certified lead-safe environment. Eligible bidders must hold a valid Connecticut Lead Abatement Contractor license and perform required pre-abatement inspections. This procurement is managed by DAS Procurement for the state of Connecticut under NAICS code 562910, with a response deadline of November 13, 2026.

POSTED

DEADLINE

Sewer Inspection & Cleaning ServicesThis subcontract for Sewer Inspection and Cleaning Services supports prime contractors on projects managed by the City of Phoenix Office of the City Engineer. The scope of work involves performing pre- and post-rehabilitation cleaning and digital inspections of sewer pipes and manholes. Required activities include high-pressure water jetting and the use of robotic cameras to conduct CCTV or digital scans. The selected provider must hold a valid Arizona ROC license to perform the work. Key deliverables include the delivery of cleaned pipe sections along with comprehensive digital CCTV inspection reports and accompanying videos. This opportunity is categorized under NAICS code 562910 and is managed through the Design and Construction Procurement agency in Arizona.

Design and Construction Procurement

POSTED

DEADLINE

Well Chemical Redevelopment and Efficiency RestorationThis subcontract for Well Chemical Redevelopment and Efficiency Restoration involves providing and applying targeted chemical treatments to the Mule Well bore for the City of Meriden. The primary objective is to remove bio-fouling and mineral deposits using industrial injection equipment to restore the well's hydraulic efficiency. The selected contractor will work under prime contractors to deliver a fully restored well along with a detailed chemical application report. Qualified bidders must hold specific Connecticut certifications for water treatment and maintain Professional Liability insurance. This opportunity is categorized under NAICS code 562910 and is managed by the Water agency in Connecticut. Interested parties must submit their responses by the deadline of November 20, 2026.

POSTED

DEADLINE

Chemical Well Redevelopment and DisinfectionThis subcontract for Chemical Well Redevelopment and Disinfection involves providing specialized cleaning services for prime contractors working on City of Meriden DPU-Water Department projects. The scope of work includes redeveloping wells for up to 36 hours through a combination of chemical treatments and mechanical surging using triple agitator surge blocks and submersible pumps. Additionally, the contractor is responsible for neutralizing chemical solutions in temporary holding tanks and disinfecting wells with a minimum 50ppm chlorine solution. To qualify, the contractor must hold the necessary Connecticut licenses and ensure full compliance with waste discharge regulations. Upon completion of the services, a detailed Well Cleaning Report must be delivered. This opportunity is managed by DAS Procurement for the state of Connecticut, with a response deadline of November 20, 2026.

DAS Procurement

POSTED

about 12 hours ago

DEADLINE

in 22 days

AI Contract Overview

The Department of National Defence, representing the Royal Military College of Canada and the Environmental Sciences Group, is seeking a contractor to provide specialized drilling services at the Float Dock located at 4 Wing Cold Lake in Yellowknife, Northwest Territories. The primary scope of work involves utilizing a drill rig to perform continuous core sampling for subsurface stratigraphy logging and soil analysis, as well as the installation of monitoring wells to assess and monitor groundwater contaminants. Additionally, the contractor will be responsible for the decommissioning of four damaged monitoring wells on-site. This federal solicitation, identified by number W0046-25-260, requires a service provider capable of executing environmental assessments in a remote northern location. The project focuses on critical soil and water quality data collection to support ongoing environmental oversight. Interested parties are directed to coordinate with the primary point of contact, Stefanie Blackman, regarding the requirements for this operational task.

General Info

Drilling services for core sampling, well installation and decommissioning at 4 Wing Cold Lake.

Agency

Government of Canada → Department of National Defence

NAICS

562910 - Remediation Services

Place of Performance

*Northwest Territories *YellowKnife, CAN

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedNov 1

Solicitation

Response DeadlineNov 1

Deadline has passed

Submission Closed

11/01/2024, 02:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of National Defence

Contacts1 person available

OfficeN/A

Organization / AgencyGovernment of Canada → Department of National Defence

Office AddressN/A

Contacts

Stefanie BlackmanPoint of Contact

contact@example.gov

+1 (555) 000-0000

Full Description

The Royal Military College of Canada (RMC) / Environmental Sciences Group (ESG) has a requirement for a drill rig for continuous core sampling through borehole drilling, monitoring well installation, and decommissioning of on-site wells for environmental assessments at the Float Dock, located at 4 Wing Cold Lake, Yellowknife, Northwest Territories. The objectives are: - Provide drilling services that allow for the collection of continuous soil cores so that the subsurface stratigraphy can be logged, and soil samples can be collected and analyzed at the Float Dock. - Install monitoring wells in select boreholes as per the direction of RMC/ESG for assessment and monitoring of contaminants in groundwater at the Float Dock. - Decommission four (4) damaged monitoring wells at the Float Dock