DRUM, SHIPPING AND S

DRUM,SHIPPING AND S
DRUM, STEEL, SHIPPING AND STORAGE.
52.246-15 CERTIFICATE OF CONFORMANCE
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RATED (MARKED) CAP. 83 LITERS (22 GAL.).
MINIMUM OVERALL CONTENT 86.3 LITERS (22.9 GAL.).
MINIMUM HEIGHT WITHOUT COVER 327.4MM (12.89 IN.)
MINIMUM INSIDE DIA. 572MM (22.5 IN.). MINIMUM
MATERIAL THICKNESS OF DRUM IS 1.09MM
(0.0428 IN.). FULL REMOVABLE HEAD WITH NUT AND
BOLT TYPE LOCKING RING. MINIMUM MATERIAL THICK
NESS OF LOCKING RING 2.40MM (0.0946 IN.).
MINIMUM MATERIAL OF BOLT 9.53MM (0.375 IN.).
MINIMUM LENGTH IS 82.55MM (3.250 IN.). BOLT AND
NUT SHALL BE INSTALLED TO THE LOCKING RING SO
THEY WILL NOT BE LOST DURING SHIPMENT. DRUM
SHALL BE FIRNISHED FULLY ASSEMBLED.
TECH DATA AVAILABILITY:
DRUM SHALL BE TESTED I.A.W. UN/POP 1A2/X115/S <(>&<)>
BE TESTED AND MARKED AIR ELIGIBLE TO A MINIMUM
OF 100 KPA.
MARKINGS: DRUM SHALL BE MARKED I.A.W. UN RQMTS.
I.A.W. 49 CFR 178 SUBPART L AND SUBPART M
SPE8ED-26-T-1466
SECTION B
DATED OCT 1993.
ORIGIN INSPECTION REQUIRED TO VERIFY THE
REQUIREMENTS OF UN TESTING AND MARKINGS I.A.W.
49 CFR SECTION 178 APPLIES.
TDP Rev A Gen 1 IAW BASIC SPEC NR MS27683C NOT 3 REVISION NR C DTD 02/17/2022 PART PIECE NUMBER: UN 1A2/X115/S
TDP Rev A Gen 1 IAW REFERENCE QAP 13873 QAP-EQ003 REVISION NR D DTD 02/09/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE SPEC NR MIL-DTL-6054G(1) NOT 2 REVISION NR G DTD 03/19/2024 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018561347 0001 EA 19.000
NSN/MATERIAL:8110000442984
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W34XC5
W6YD USALRCTR FT CAMPBELL
CRP BLDG 5207 AWCF SSF
8TH STREET AND DESERT STORM AVE
SPE8ED-26-T-1466
SECTION B
PR: 7018561347 PRLI: 0001 CONT’D
FORT CAMPBELL KY 42223-5000
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W34XC5
W6YD USALRCTR FT CAMPBELL
CRP BLDG 5207 AWCF SSF
8TH STREET AND DESERT STORM AVE
FORT CAMPBELL KY 42223-5000
US
MARKFOR
W34XC5
W6YD USALRCTR FT CAMPBELL
CRP BLDG 5207 AWCF SSF
8TH STREET AND DESERT STORM AVE
FORT CAMPBELL KY 42223-5000
US
M/F: (TCN) W34XC552240620
RDD: 239
PROJ: TP 2
SUPP ADD: W34XC5 SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A0A DIST: ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:08/15/2025
SPE8ED-26-T-1466 NSN/Part Number: 8110-00-044-2984 Quantity: 19 EA Purchase Request: 7018561347QTY: 19 Delivery: 20 days ADO