SKID, SHIPPING CONTA

SKID,SHIPPING CONTA
SKID, SHIPPING CONTAINER,MAIN TRANSMISSION
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
P/N: 8115MNP087
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
RD002, COVERED DEFENSE INFORMATION APPLIES
(81996) U.S. ARMY AVIATION AND MISSILE COMMAND WOOD REQUIREMENTS: HARDWOOD GROUP 4 I/L/O MIL-STD-731 USE ASTM D6199 WPM REQUIRES TREATMENT IN ACCORDANCE TO ISPM 15, (MARKED WITH APPROVED MARK & MEETS REQUIREMENT SET FOR WPM MOVING IN INTERNATIONAL TRADE.) MOISTURE CONTENT BETWEEN 19% AND 9% PRESERVATIVE TREATMENT: RATED-GROUND CONTACT LIMITED CHECKS/CRACKS/TWISTING WOOD IS TO BE UNPAINTED. HEAT TREAT MARKING 4 LOCATIONS: BOTH ENDS AND OUTSIDE RIGHT ON OPPOSITE SIDES. (DO NOT MARK TOP OR BOTTOM) PACKAGING RECOMMENDATION DO NOT USE PLASTIC BAGS. DRAWING EXCEPTION: NOTE 5: SPEC TT-W-571 CANCELED REFER TO AWPA BOOK OF STANDARDS.
TECHNICAL DATA AVAILABILITY: SOURCE INSPECTION REQUIRED.
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT DLA DURING "OPEN SOLICITATION ONLY". TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)> FOR EBS SOLICITATIONS USE URL HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
SPE8ED-26-T-1468
SECTION B
DETAILED DRAWING
SPECIFICATION
TDP Rev A Gen 1 IAW BASIC DRAWING NR 81996 8115MNP087 REVISION NR B DTD 04/10/1969 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018561647 0001 EA 1.000
NSN/MATERIAL:8145010457880
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W45N7V
W0MU USA DEP CORPUS CHRISTI
540 FIRST ST ES BLDG 1846
CORPUS CHRISTI TX 78419-5255
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W45N7V
W0MU USA DEP CORPUS CHRISTI
540 FIRST ST ES BLDG 1846
CORPUS CHRISTI TX 78419-5255
SPE8ED-26-T-1468
SECTION B
PR: 7018561647 PRLI: 0001 CONT’D
US
MARKFOR
W45N7V
W0MU USA DEP CORPUS CHRISTI
540 FIRST ST ES BLDG 1846
CORPUS CHRISTI TX 78419-5255
US
M/F: (TCN) W45N7V531700FW
RDD: 777
PROJ: TP 1
SUPP ADD: W45H08 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: ADV: FC: VN
Need Ship Date:00/00/0000 Original Required Delivery Date:11/18/2025
SPE8ED-26-T-1468 NSN/Part Number: 8145-01-045-7880 Quantity: 1 EA Purchase Request: 7018561647QTY: 1 Delivery: 5 days ADO