SOURCES SOUGHT NOTICE: DRY DOCK REPAIRS USCGC BARBARA MABRITY. This SOURCES SOUGHT NOTICE is for market research purposes only and does not constitute a Request for Proposal/Quotation; and, it is not considered to be a commitment by the Government to award a contract nor will the Government pay for any information provided; no basis for claim against the Government shall arise as a result from a response to this Sources Sought Notice or Government use of any information provided. Pursuant to FAR Part 10 (Market Research), the purpose of this notice is to: (1) Determine if sources capable of satisfying the agency's requirements exists. (2) Determine if commercial items suitable to meet the agency's needs are available or could be modified to meet the agency's requirements. (3) Determine the commercial practices of company's engaged in providing the needed service or supply. Pursuant to FAR Part 6 and FAR Part 19, competition and set-aside decisions may be based on the results of this market research. This notice in no way obligates the Government to any further action. REQUIREMENT: This notice is issued by the U.S. Coast Guard, Surface Force Logistics Center, Norfolk, VA to identify sources capable of providing the following: Contractor shall provide all necessary facilities, materials, equipment, and personnel to DRYDOCK repairs to the USCGC Barbara Mabrity, a 175' long Keeper Class Cutter. The USCGC Barbara Mabrity is home ported in Mobile, AL SCOPE OF WORK: The scope of the acquisition is for the DRYDOCK repairs of the USCGC BARBARA MABRITY. This work will include, but is not limited to the following work items: D-001 Hull Plating (U/W Body), Inspect D-002 Hull Plating (U/W Body), Ultrasonic Testing D-003 Appendages (U/W), Leak Test D-004 Appendages (U/W) - Internal, Preserve D-005 Chain Lockers, Clean and Inspect D-006 Tanks (MP Fuel Stowage and Overflow), Clean and Inspect D-007 Voids (Non-Accessible), Leak Test D-008 Voids (Non-Accessible), Internal Surfaces, Preserve D-009 Tanks (Hydraulic Oil Stowage and Service), Clean and Inspect D-010 Tanks (Lube Oil), Clean and Inspect D-011 Tanks (Dirty Oil and Waste), Clean and Inspect D-012 Z-Drive Propulsion Units, Overhaul D-013 Ship Service Diesel Generator (SSDG) Exhaust Piping, Commercial Clean D-014 Fathometer Transducer, Renew D-015 Underwater (Speed) Log Transducer(s), Renew D-016 Sea Strainers - Duplex (All Sizes), Overhaul D-017 Sea Bay, Clean and Inspect D-018 Sea Bay, Preserve 100% D-019 Thruster Unit (General), Overhaul D-020 Hydraulic Cross deck Winches, Inspect and Service D-021 Hydraulic Inhaul Winch, Inspect and Service D-022 Mechanical Chain Stoppers, Inspect and Service D-023 Anchor Windlass, Inspect and Service D-024 Anchor Chain(s) and Ground Tackle, Inspect and Repair D-025 Warping Capstan (Aft), Inspect and Service D-026 Tanks (Dirty Oil and Waste), Preserve "100%" D-027 Tanks (Dirty Oil and Waste), Preserve "Partial" D-028 U/W Body, Preserve (100%) D-029 Hull Plating Freeboard, Preserve "100%" D-030 Cathodic Protection / Zinc Anodes, Renew D-031 Drydock D-032 Temporary Services, Provide - Cutter D-033 Sea Trial Performance, Support, Provide D-034 M240 Gun Mounts, Ready Service Locker, and Ammunition Stowage Box, Install D-035 Bilges, Preserve D-036 Buoy Deck Cleats, Modify D-037 Power Assisted Griping System, Remove D-038 Buoy Crane Main Winch, CT Function, Remove D-039 Chain Locker, Preserve 100% D-040 Decks - Exterior (Buoy or Construction Deck), Preserve 100% D-041 Tanks (Sewage Holding), Preserve "Partial" (O) D-042 Deck Covering, Wet/ Dry, Seal D-043 Scuttles (External), Renew D-044 Deck Covering (Interior Wet/Dry), Renew D-045 Decks (All Interior) Pump Room, Preserve D-046 Decks - Exterior, Preserve ("MIL-Spec/Flight Deck" System) D-047 Superstructure, Preserve "100%" D-048 Sewage Tank Firemain Washdown Nozzle, Renew Anticipated Period of Performance: The period of performance is anticipated to be for SEVENTY (70) calendar days with a start date of 04 May 2016 - 13 Jul 2016 NAICS Code/Size Standard: The applicable NAICS Code is 336611, Ship Building and Repairing and the size standard is 1,000 employees. Submission of Information: Companies having capabilities necessary to meet or exceed the stated requirements are invited to provide information to contribute to this market survey/sources sought notice including commercial market information and company information.**Companies may respond to this Sources Sought Notice via e-mail to:
contact@example.gov or via fax to
+1 (555) 000-0000 (Attn: Sandra Martinez/C&P2-IBCT) no later than 10 November 2015 at 10:00AM, Eastern Time. **Please provide the following information/documentation: 1. Name of Company, Address and DUNS Number. 2. Point of Contact and Phone Number. 3. Business Size applicable to the NAICS Code: 8(a) Small Business Concern, HubZone Small Business Concern, Service-Disabled Veteran Owned Small Business Concern (SDVOSBC) or a Small Business Concern. 4. Documentation Verifying Small Business Certification. 5. Statement of Proposal Submission: Statement on how your company will do the work and that your company WILL submit a proposal as a prime contractor if a solicitation is issued as a result of this Sources Sought Notice. 6. Past Performance Information: Evidence of experience in work similar in type and scope to include contract numbers, project titles, and dollar amounts, points of contact and telephone numbers. If two companies are planning to conduct business as a Joint Venture or any other type of teaming agreement, they shall provide past performance on projects of similar scope that they have performed together as a Joint Venture. Providing individual past performance documentation from each company on separate projects where the two did not work together is not considered to be sufficient past performance. A Joint Venture that cannot provide this requested information will not be considered to have sufficient documentation needed to evaluate past performance as an evaluation factor. Interested parties should register in the System for Award Management (SAM) which replaced the Central Contractor Registration (CCR) as prescribed in FAR Clause 52.232-33. SAM can be obtained by accessing the internet at www.sam.gov. Failure to submit sufficient detailed information may result in considering a company as not a viable source and may influence competition and set-aside decisions. Regardless of the information obtained from this Sources Sought Notice, the Government reserves the right to consider any arrangement as deemed appropriated for this requirement. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. No proprietary, classified, confidential, or sensitive information should be included in your response to this Sources Sought Notice. The Government reserves the right to use any information provided by respondents for any purpose deemed necessary and legally appropriate, including using technical information provided by respondents in any resultant solicitation. After a review of the responses received from this notice, a pre-solicitation notice and solicitation may be published on Federal Business Opportunities (FedBizOpps) website. It is the potential offeror's responsibility to monitor FedBizOpps for release of any future solicitation that may result from this Sources Sought Notice. However, responses to this Sources Sought Notice will not be considered adequate responses to any resultant solicitation.
