This Combined Synopsis/Solicitation opportunity from Department Of Homeland Security was posted on January 26, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

DRYDOCK REPAIRS FOR THE CGC OAK

Closed

70Z08525QIBCT0015Federal

Submission Closed02/02/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336611

New

SLED

F&W, 2018 Munson Packman Boat Repower project

Solicitation # 2018 Munson Packman Boat Repower

The Confederated Tribes of the Colville Reservation Fish and Wildlife Department is soliciting proposals for a comprehensive propulsion repower and helm system integration for a 30 foot Munson Packman landing craft. The project requires a factory-certified Honda Marine Authorized Dealer to decommission and remove two existing Honda BF250A outboard engines and replace them with new Honda BF250D Drive-by-Wire outboards. The scope of work is divided into six phases, encompassing the removal of legacy rigging, a structural assessment of the transom, installation of new engines and Honda iST electronic control heads at dual helm stations, integration with the existing SeaStar PA1315-2 Power Assist steering and NMEA 2000 network, and a complete fuel system overhaul using USCG Type A1-15 lines. The project concludes with static diagnostics and a minimum two-hour sea trial to validate performance and safety protocols. The selected contractor must provide a secure facility for vessel storage and adhere to strict insurance requirements, including at least 1 million dollars in commercial general liability and business auto liability. Financial protections include a 25 percent retainage or a performance bond, with a bond being mandatory for contracts exceeding 100,000 dollars. Proposals are due by November 13, 2026, and will be evaluated based on a 100-point scale considering technical capability and budget, with specific preferences given to responsible Indian Offerors under TERO and tribal preference laws. All disputes are subject to the jurisdiction of the Colville Tribal Court, and payments are contingent upon the availability of tribal funds.

Confederated Tribes of the Colville Reservation

POSTED

DEADLINE

PANEL, VEHICULAR OPERAT

Solicitation # SPE7M4-27-T-1904

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

SWITCHBOARD, ALARM, SHIP

Solicitation # SPE4A6-27-T-7280

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-1931

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-1892

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

WINDSHIELD WIPER ASSEM

Solicitation # SPE7M4-27-T-1887

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-4939

Solicitation SPE4A6-27-T-4939 is a total small business set-aside issued by the DLA Weapons Support ASC Commodities Division for the procurement of three rudder angle indicators, identified by NSN 6320007316134. The requirement is for a critical application item, specifically referencing Dynalec Corporation part number 4N7N. Delivery is required by December 18, 2027, with a need ship date of April 13, 2027, shipped FOB Origin to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to quality and technical standards, including CMMC Level 2 Self-Assessment and compliance with SAE AS9003 or ISO 9001. Inspection and acceptance will occur at the origin, utilizing zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with a strict prohibition on the use of mercury or mercury compounds in preservation and packaging. Offerors not listed as acceptable sources must obtain source approval from the design control activity. Payment and invoicing are to be processed electronically through the Wide Area Workflow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7MC-27-T-0664

Solicitation SPE7MC-27-T-0664 is a total small business set-aside issued by the DLA Distribution San Joaquin for the procurement of two ball valves, identified by NSN 4820015426625 and Hunt Valve Company part number D2355(ASSY2). This critical application item requires Item Unique Identification in accordance with MIL-STD-130 and DFARS 252.211-7003. The required delivery date is April 9, 2027, with a need ship date of April 6, 2027. Delivery is FOB Origin under the First Destination Transportation program, with the final destination being the DLA Distribution San Joaquin facility in Tracy, California. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. All payment requests and receiving reports must be processed electronically through the Wide Area Workflow system. The procurement is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and specific DFARS clauses regarding cybersecurity and the prohibition of certain telecommunications equipment. All quotes must be submitted via the DLA Internet Bid Board System, and the use of additive manufacturing processes for the supplied parts is prohibited unless specifically authorized.

POSTED

DEADLINE

Hull and Structural Steel RepairThis subcontract for Hull and Structural Steel Repair involves providing specialized steel fabrication and welding services for prime contractors supporting Puget Sound Naval Shipyard IMF projects. The scope of work includes the removal of chevron retaining hardware, the modification of rubber fender retention according to drawing SK10901, and the repair of rubber fender straps located at the bow and stern. All welding activities must strictly adhere to ANSI/AWS D1.1/D1.2 standards to ensure the structural integrity of the delivered hull components. Managed under the Department of Defense with a NAICS code of 336611, the project focuses on the delivery of modified and repaired hull structures. The solicitation was posted on October 27, 2026, with a response deadline set for November 3, 2026.

Puget Sound Naval Shipyard IMF

POSTED

DEADLINE

USNS SALVOR (T-ARS 52) VOYAGE REPAIR AVAILABILITY (VRA)

Solicitation # N6264927QL003

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

TSV4 NARR MESSING AND MODERNIZATION

Solicitation # N0018927QL008

NAVSUP FLT LOG CTR Norfolk is soliciting a firm-fixed-price contract for the development of a drawing package and Bill of Materials (BOM) to support habitability upgrades for the TSV4 Narragansett. The scope of work focuses on the vessel's messing, berthing, stateroom, and sanitary spaces at Joint Expeditionary Base Little Creek-Fort Story in Virginia Beach, Virginia. This effort is strictly limited to assessment and documentation; it specifically excludes any procurement, fabrication, removal, or installation of shipboard components. The project is a total set-aside for small businesses, including service-disabled veteran-owned small businesses, under NAICS code 336611. Key deliverables include a draft drawing package and BOM due 40 calendar days after award, with the final delivery of two electronic files and two full-size paper copies in NAVSEA format due within 61 calendar days. Contractors must adhere to several technical standards, including MIL-STD-2003 for electric plants, MIL-STD-777 for piping, and General Specifications for Overhaul of Surface Ships. A mandatory ship check at Colonna's Shipyard in Norfolk is required for eligibility, and failure to attend will result in disqualification. Award will be based on the best value, evaluating the mandatory ship check on a pass/fail basis and the technical approach on an acceptable/unacceptable basis, with the final selection going to the lowest total evaluated price.

Navsup Flt Logistics Ctr Norfolk

POSTED

DEADLINE

BIG BLUE 3 MAC - N64498-26-Q-5284

Solicitation # N6449826Q5284

The BIG BLUE 3 MAC solicitation, identified by number N6449826Q5284, is issued by the Department of Defense through the Naval Surface Warfare Center Philadelphia Division. This procurement falls under NAICS code 336611, indicating a focus on the manufacture of boat and marine vessel engines. The opportunity was posted on October 27, 2026, with a response deadline set for November 2, 2026. The contracting office is located in Philadelphia, Pennsylvania. Interested parties may coordinate with the primary point of contact, Anthony Ricciardi, for further inquiries. Detailed specifications and submission requirements can be accessed via the provided government portals.

Nswc Philadelphia Division

POSTED

about 22 hours ago

DEADLINE

in 5 days

AI Contract Overview

The contract outlines drydock repair services for the CGC OAK, with the period of performance scheduled from March 31, 2026, to June 20, 2026. It is a total small business set-aside solicitation, identified under NAICS code 336611, issued by the Department of Homeland Security through the SFLC Procurement Branch 2. The solicitation number is 70Z08525QIBCT0015, and responses were due by January 26, 2026. Work will be coordinated from the office located in Alameda, California, although the precise place of performance is unspecified. Primary and secondary points of contact are available for communication, with Sandra A. Martinez serving as the primary contact and Iran Walker as the secondary. The contract is advertised as a combined type, emphasizing the importance of small business participation under federal acquisition regulations.

General Info

Drydock repair for CGC OAK, March-June 2026, small business set-aside, DHS solicitation.

Agency

Department Of Homeland Security → Sflc Procurement Branch 2(00085)

NAICS

336611 - Ship Building and Repairing

Place of Performance

Set-Aside

SBA

Documents

Amendment 0001 Pricing Sheet for USCGC OAK Drydock Availability FY2026

5 pages · amendment

High

Amendment 0002 Questions and Answers

1 page · amendment

High

Amendment 0002 to Solicitation 70Z08525QIBCT0015

3 pages · amendment

High

Amendment 001 - Requirements Contract FAR 52.216-21

1 page · amendment

High

Amendment A00001 to Solicitation 70Z08526QIBCT0015

2 pages · amendment

High

Solicitation 70Z08526QIBCT0015 for Ship Repair Services

42 pages · rfp

High

USCGC OAK (WLB-225B) Drydock Availability FY2026 Pricing Sheet

5 pages · pricing-schedule

High

USCGC OAK (WLB 225B) Drydock Repairs Specification FY2025 Rev 2

280 pages · specifications

High

USCGC OAK (WLB 225B) Drydock Repairs Work Specifications FY2025

283 pages · sow

High

USCG Justification for Other Than Full and Open Competition - Defense Maritime Solutions

1 page · justification-and-authorization

High

U.S. Coast Guard Justification for Other Than Full and Open Competition for Tech Rep Services

1 page · justification-and-authorization

High

U.S. Coast Guard Justification for Other Than Full and Open Competition - PR 52000PR260000094

1 page · justification-and-authorization

High

OAK+SOLICITATION.docx

AI Contract Breakdown

Uniform Contract Format

Timeline

2 updates

PhaseClosed

PostedDec 31

Combined Synopsis

Notice updatedDec 31

Notice details unchanged. Attachments may have changed.

Deadline changedJan 26

Response deadline changed from Jan 26, 2026 to Feb 2, 2026.

Response DeadlineFeb 2

Deadline has passed

Submission Closed

02/02/2026, 03:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Homeland Security → Sflc Procurement Branch 2(00085)

Contacts2 people available

OfficeALAMEDA, CA, 94501, USA

Organization / AgencyDepartment Of Homeland Security → Sflc Procurement Branch 2(00085)

Office AddressALAMEDA, CA, 94501, USA

Contacts

Sandra A. Martinez

contact@example.gov

Iran Walker

contact@example.gov

+1 (555) 000-0000

Full Description

SEE ATTACH FOR THE CGC OAK DRYDOCK

POP: 31 MARCH 2026 - 20 JUNE 2026

More opportunities from Department Of Homeland Security → Sflc Procurement Branch 2(00085)

Same awarding agency

NAICS: 541330

Federal

Marine Engineering & Technical Documentation ConsultantThis subcontract for Marine Engineering and Technical Documentation Consulting supports the USCG USCGC HEALY SLEP projects through the Department of Homeland Security. The selected consultant will be responsible for integrated system design, drafting, and the creation of provisioning data requirements for prime contractors. Key deliverables include System Arrangement and Detail drawings, system schematics, Material Lists with NSNs, the Integrated Master Schedule, and Provisioning Technical Data, all developed using CAD software in accordance with USCG and MIL-STD standards. The project is categorized under NAICS code 541330 and is managed by the Sflc Procurement Branch 2. Performance of the contract will take place in Seattle, Washington. The response deadline for this opportunity is October 6, 2027.

POSTED

DEADLINE

Marine Electrical Cable & Wiring SubcontractorThis subcontract involves the supply and installation of electrical cabling for DFT and Steering Control systems on USCG USCGC HEALY SLEP projects. The scope of work includes routing marine-grade cabling through ducts and raceways, terminating cables at consoles and cabinets, and delivering fully installed and tested wiring harnesses. All work must be performed in accordance with SFLC Std Spec 3041 and 3042, as well as MIL-STD-1399-300-1. Managed by the Department of Homeland Security through the SFLC Procurement Branch 2, the project is located in Seattle, Washington. The contract falls under NAICS code 238210, with a response deadline set for October 6, 2027.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Steering Control System Specialist (COTS PLC)This subcontract opportunity with the Department of Homeland Security's Sflc Procurement Branch 2 involves the replacement of existing steering control systems with COTS PLC-based designs for the USCGC HEALY SLEP projects. The selected specialist will be responsible for interfacing new PLC systems with existing electro-hydraulic steering gear and navigation systems, configuring communication protocols, and ensuring full adherence to COTS standards and USCG navigation interface requirements to deliver a fully operational steering control system. The project is based in Seattle, Washington, under NAICS code 334511. Interested parties must submit their responses by October 6, 2027.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Boiler Control Systems & PLC IntegratorThis subcontract opportunity with the Department of Homeland Security involves the replacement of obsolete boiler PLCs and burner sequencing controls for prime contractors working on USCG USCGC HEALY SLEP projects. The selected integrator will be responsible for designing and installing PLC-based controls, programming burner sequencing, and conducting initial light-off and burner adjustments. All work must be performed using a combustion analyzer in strict accordance with MIL-STD-1399-300-1 and USCG Tech Pub S9517-AY-MMC-010 to ensure a fully operational control system. The project is based in Seattle, Washington, under NAICS code 332410. Managed by Sflc Procurement Branch 2, the contract requires the delivery of a functional boiler PLC and burner sequencing control system. Interested parties must submit their responses by the deadline of October 6, 2027.

Power Boiler and Heat Exchanger Manufacturing

POSTED

DEADLINE

Marine Piping & Mechanical Installation ContractorThis subcontract for the Department of Homeland Security involves the shipboard installation of the DFT, feedwater treatment systems, and associated piping for the USCG USCGC HEALY SLEP projects in Seattle. The contractor is responsible for installing equipment on foundations according to Coast Guard drawings, performing pipe cleaning, flushing, and testing, and welding copper-nickel and bronze piping. All work must adhere to SFLC Std Spec 6310 and MIL-STD-777 standards to deliver a fully installed and tested boiler feedwater piping and tank system. The opportunity is managed by the Sflc Procurement Branch 2 under NAICS code 336611. The solicitation was posted on September 18, 2026, with a response deadline of October 6, 2027.

Ship Building and Repairing

POSTED

DEADLINE

Deaerating Feed Tank (DFT) & Feedwater Treatment System ManufacturerThis subcontract through the Department of Homeland Security involves the design, manufacture, and delivery of one Deaerating Feed Tank and NSTM 220 V2 compliant feedwater treatment systems for the USCG USCGC HEALY SLEP projects. The manufacturer must utilize MIL-C-15726 Copper-Nickel Alloy and MIL-B-24480 Bronze/Nickel-Aluminum materials and maintain ANSI/ASQ 9001:2015 certification. The project is managed by the Sflc Procurement Branch 2 and requires delivery of the equipment to the installation site in Seattle, Washington. The response deadline for this opportunity is October 6, 2027.

Pump and Pumping Equipment Manufacturing

POSTED

DEADLINE

Military-Grade Radar Component Packaging & PreservationThis subcontract opportunity with the Department of Homeland Security's SFLC Procurement Branch 2 involves providing specialized preservation, packaging, and marking services for sensitive electronic radar equipment. The selected provider will support prime contractors on USCG Surface Forces Logistics Center projects by applying corrosion prevention materials, implementing ESD protection for electronics, and securing components in military-spec crates. All packages must be marked according to government specifications using industrial equipment to ensure components are ready for transport. The project is based in Baltimore and falls under NAICS code 488410. Interested parties must submit their responses by the deadline of December 1, 2026.

POSTED

DEADLINE

Radar Pedestal Mechanical Repair & OverhaulThis subcontract, managed by the Department of Homeland Security's SFLC Procurement Branch 2, involves the mechanical overhaul and repair of radar pedestal assemblies, specifically part number 54.2424.600.00 and NSN 5985-01-676-8432. The scope of work includes mechanical disassembly, cleaning, part replacement, and the testing of rotation and stability using precision alignment and heavy mechanical tooling. All services must comply with USCG SFLC repair and preservation standards to ensure the delivery of certified overhauled pedestals for prime contractors on USCG Surface Forces Logistics Center projects. The project is categorized under NAICS code 811210 and will be performed in Baltimore. The solicitation was posted on August 24, 2026, with a response deadline of December 1, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

AN/SPS-75 Radar Electronic Component RepairThis subcontract involves the overhaul and repair of AN/SPS-75 radar electronic components for prime contractors supporting the USCG Surface Forces Logistics Center. The scope of work includes the disassembly, inspection, and diagnostic troubleshooting of power supplies, circuit card assemblies, and RF/IF units. All work must be performed using specialized RF/IF test equipment and circuit board diagnostic tools in strict accordance with OEM standards and proprietary technical data to ensure the delivery of fully repaired and tested components. The project is managed by the Department of Homeland Security under the Sflc Procurement Branch 2 and is categorized under NAICS code 334290. Performance of the contract will take place in Baltimore. The solicitation was posted on August 24, 2026, with a response deadline of December 1, 2026.

Other Communications Equipment Manufacturing

POSTED

DEADLINE

TRS-3D /AN/SPS-75 Radar repairs/ overhaul services

Solicitation # 70Z08526RRJ001B00

The United States Coast Guard Surface Forces Logistics Center is soliciting repair and overhaul services for the AN/SPS-75 Air Search Radar System, specifically for the 418-foot Legend-class National Security Cutter fleet. This is a sole-source acquisition awarded to Northern Defense Industries, LLC, as they are the only authorized U.S. service provider for these proprietary OEM parts and technical data. The scope of work includes the disassembly, inspection, testing, repair, preservation, packaging, and marking of various critical components, such as power supplies, circuit card assemblies, and radar set subassemblies. All repairs must adhere to Original Equipment Manufacturer specifications to maintain operational readiness and system warranties. The contract is structured as a requirements contract with fixed-price delivery orders, consisting of a base period and three one-year ordering periods, with an additional six-month extension option. Performance is primarily conducted at the contractor's facilities, with a strict requirement for items to be preserved for at least two years of warehouse storage and packaged according to military standards. Award is based on technical capability and fair and reasonable pricing, with evaluations focusing on resources, quality assurance, and past performance. Administrative requirements include electronic invoicing via the Invoice Processing Platform and the provision of a dedicated Project Manager to serve as the primary point of contact.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Supply of Appleton Jib CylindersThis subcontract opportunity, managed by the Department of Homeland Security's SFLC Procurement Branch 2, involves the procurement and delivery of three brand-name Appleton Jib Cylinders, part number YMD-9526, for USCG Surface Forces Logistics Center projects. The contract is designated as a Total Small Business Set-Aside under NAICS code 423830. To be eligible, providers must submit an authorized distributor letter from Appleton Marine Inc. The selected contractor is responsible for ensuring all items are packaged and marked according to MIL-STD-2073-1E, MIL-STD-129R, and ISO/IEC-16388-2007 standards. The final delivery of the three packaged cylinders is to be made to Baltimore, Maryland, specifically in the Curtis Bay area. The response deadline for this solicitation is July 26, 2027.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Solicitation # 70Z08526Q40200B00

Solicitation 70Z08526Q40200B00 is a combined synopsis and request for quote issued by the U.S. Coast Guard Surface Forces Logistics Center for the procurement of specific brand name components from Appleton Marine Inc. This is a Brand Name Only solicitation with no substitutions authorized; therefore, interested vendors must be authorized distributors and provide an authorized distributor letter from the Original Equipment Manufacturer with their quotation. The requirement is a total small business set-aside under NAICS code 333995 and will result in a firm-fixed-price purchase order. The procurement consists of three line items: three Jib Cylinders (NSN 3040 01-F12-2745), four Luff Cylinders (NSN 3040 01-F12-2743), and ten Sheaves (NSN 3020 01-F12-2750). Strict packaging and marking standards apply, including MIL-STD-2073-1E Method 10 for cylinders and ASTM D5118 fiberboard boxes for sheaves, with all items requiring marking per MIL-STD-129R and barcoding per ISO/IEC-16388-2007. Delivery is required by September 30, 2026, to the USCG Surface Forces Logistics Center in Baltimore, Maryland, with shipping terms set as FOB Destination. Offers will be evaluated based on price and the ability to meet the brand name and authorized distributor requirements. Successful contractors must submit invoices through the Invoice Processing Platform with payment terms of Net 30. All submissions must include the vendor's Unique Entity Identifier and CAGE code, and offerors must maintain current representations and certifications in the System for Award Management.

Fluid Power Cylinder and Actuator Manufacturing

POSTED

3 months ago

DEADLINE

in 9 months

View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 336611

Awarded

Federal

Retractable Chock Parts

Solicitation # N5005426Q0080

Mid Atlantic Reg Maintenance Ctr

POSTED

CLOSED

NONSKID DECK COVERING ON FORECASTLE DECK; REPLACE

Solicitation # N6264926R0033

Navsup Flt Logistics Ctr Yokosuka

POSTED

CLOSED

USCGC Hamilton Ship Service Diesel Generator Service

Solicitation # 70Z08526Q0002835

Sflc Procurement Branch 2(00085)

POSTED

CLOSED

Solicitation # SPE7M226T2275

DLA Land And Maritime

POSTED

CLOSED

Solicitation # SPE7M326T2798

DLA Land And Maritime

POSTED

CLOSED

USCG TRAINING FOR VEGA TLI SYSTEMS TRAINING

Solicitation # 70Z08526Q002505

Sflc Procurement Branch 2(00085)

POSTED

CLOSED

Repair Submarine Fenders with Counterweight

Solicitation # N6264926QB019

Navsup Flt Logistics Ctr Yokosuka

POSTED

CLOSED

Solicitation # SPMYM4-25-Q-0612

DLA Maritime - Pearl Harbor

POSTED

CLOSED

Solicitation # N0010426QXA68

Navsup Weapon Systems Support Mech

POSTED

CLOSED

59--SOLENOID SUBASSEMBL

Solicitation # SPE7M126Q0507

DLA Land And Maritime

POSTED

CLOSED

USCG PATOKA MOLD REMEDIATION AND RE-INSULATION

Solicitation # 70Z08526Q0001423

Sflc Procurement Branch 2(00085)

POSTED

CLOSED

MARMC Lagging and Insulation Removal and Installation

Solicitation # 411-24-430

Mid Atlantic Reg Maintenance Ctr

POSTED

9 months ago

CLOSED

9 months ago

View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS