This Government Contract opportunity was posted on September 25, 2019. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Dual Emulator and Associated Control Computer/Software

Awarded

80GRC019P0042Federal

Submission Closed09/20/2019, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336390

New

DIBBS

6 Gallon Fuel Bladder for Outboard MotorsThis subcontract involves the supply of 6 gallon fuel bladders for outboard motors to prime contractors supporting the DLA Weapons Support LSO Combat Vehicles and Armament. The contractor is responsible for sourcing the specific item identified by NSN 2910014474893 and ensuring all materials are packaged in strict accordance with MIL-STD-2073-1E. Eligible providers must maintain Small Business status and adhere to FOB Origin shipping terms. The physical fuel bladders must be delivered to the designated DLA location within 105 days of the order. This requirement falls under NAICS code 336390 and is managed through the Department of Defense.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Manufacture and Supply of Drive Shafts (NSN 3040-99-723-4318)This subcontract involves the manufacture and supply of seven drive shafts, part number 2A058-0395, for prime contractors supporting the DLA Weapons Support Land Supplier Opns Vehicle Spt. The selected provider is responsible for the fabrication or procurement of these components in strict accordance with DLA technical and quality requirements, with final delivery conducted FOB Origin from New Cumberland. The contract mandates rigorous adherence to federal regulations, including the Buy American Act, the Berry Amendment, and DFARS 252.204-7012. Additionally, all items must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards to ensure compliance with Department of Defense specifications.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Steering Tie Rod Ends (Right Side)This subcontract, issued by the Department of Defense for the DLA Weapons Support Land Supply Chain, requires the procurement and delivery of 354 new, non-remanufactured right-side steering tie rod ends under NSN 2530011338318. The contract is designated as a Total Small Business Set-Aside under NAICS code 336390. The supplier must ensure all items are packaged and palletized according to RP001 standards and marked in compliance with MIL-STD-129. Additionally, the contractor is required to adhere to DFARS 252.204-7012 regulations regarding cybersecurity reporting.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Vehicular Seat Fabrication and AssemblyThis subcontract involves the manufacture and assembly of 15 vehicular seats for prime contractors supporting the DLA Weapons Support Land Supply Chain. The scope of work includes fabricating seat frames and assembling components according to NSN 2540-01-502-7357, utilizing specialized metal fabrication and industrial sewing equipment. Completed units must be delivered FOB Origin to the DLA Distribution DDSP in New Cumberland, Pennsylvania. To be eligible, contractors must hold an approved US/Canada Joint Certification Program certification and maintain either ISO 9001 or SAE AS9003 certification. The project falls under NAICS code 336390 and is managed by the Department of Defense. Responses to the solicitation are due by November 12, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Structural Vehicular Frame SupplierThis subcontract involves the sourcing or manufacture of one structural vehicular frame, specifically part number 8703701 from Schutt Industries, for prime contractors supporting the DLA Weapons Support Land Supply Chain. The supplier must ensure the product meets all specifications outlined in the DLA Master List of Technical and Quality Requirements and adheres to the Buy American Act and prohibitions regarding covered defense telecommunications equipment. The contract is categorized under NAICS code 336390 and pertains to National Stock Number 2510016895141. Managed by the Department of Defense, the opportunity was posted on November 1, 2026, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supplier of Steering Gear Parts Kits (NSN 2530-01-738-3328)This subcontract, issued by the Department of Defense under the DLA Weapons Support Land Supplier Operations Vehicle Support agency, requires the supply of 23 Steering Gear Parts Kits. All components must strictly adhere to NSN 2530-01-738-3328 specifications. The contract is designated as a Total Small Business Set-Aside under NAICS code 336390, with performance taking place in Tracy, California. The supplier is responsible for the full palletization and packaging of the kits in accordance with RP001 DLA Packaging Requirements and MIL-STD-2073-1 Appendix D. Additionally, all shipments must be marked according to MIL-STD-129 standards. The final deliverable consists of 23 fully packaged and marked kits intended for prime contractors fulfilling DLA supply contracts.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Level Stabilizers (NSN 2590015774608)This subcontract involves the supply of Level Stabilizers, identified by NSN 2590015774608, for prime contractors under DLA supply contracts. The selected provider is responsible for manufacturing or sourcing the hardware in strict accordance with the DLA Master List of Technical and Quality Requirements. All deliverables must adhere to specific packaging standards per RP001 and ASTM D3951, and marking must comply with MIL-STD-129. Managed by the DLA Weapons Support Land Supply Chain under the Department of Defense, the contract requires the provider to maintain a CMMC Level 2 self-assessment and ensure full compliance with the Buy American Act. The scope of work concludes with the delivery of the physical hardware to the designated destination. The solicitation was posted on November 1, 2026, with a response deadline of November 12, 2026, falling under NAICS code 336390.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Marine Silencer (Air Blower Intake) SupplierThis subcontract involves the supply of specialized marine silencers for air blower intakes to support prime contractors on DLA Weapons Support Land Supply Chain projects. The scope of work requires the manufacture or sourcing of NSN 2990-00-363-7395 specifically for LCU-1466 and LCM 8 Mod 1 landing craft. The contract mandates the delivery of two marine silencers on a FOB Origin basis. Compliance is required with the DLA Master List of Technical and Quality Requirements (RA001) and the Buy American Act. Additionally, all items must be packaged according to MIL-STD-2073-1E and MIL-STD-129 standards. The opportunity falls under NAICS code 336390 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Disc Brake Calipers (NSN 2530-01-579-1045)This subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, requires the procurement or manufacture of 154 specialized disc brake calipers. The components must strictly adhere to Part Number 03-520-091 from ZF Off-Highway Solutions Minnesota Inc and correspond to NSN 2530-01-579-1045. All units must be delivered FOB Origin within 113 days of the order placement. The contract mandates strict compliance with military standards, specifically requiring packaging according to MIL-STD-2073-1E and RP001, and marking per MIL-STD-129. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 336390, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L4-27-T-0732

This solicitation, issued by the DLA Weapons Support LSO Combat Vehicles and Armament, is a request for quotations for one tow hook bracket, identified by NSN 2540-01-495-8321 and part number E04872. The requirement involves a single unit with a delivery window of 20 days after order, and an original required delivery date of October 28, 2026. Due to the nature of the item, casting or forging may be required for manufacture, and contractors are advised to seek assistance through DLA's casting and forging channels if tooling or material information is unavailable. The item is to be delivered to Japan, with the freight shipping address located at Yokohama North Dock and a bulk break point at Camp Zama. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. It specifies a packing level B and pack code Q, with palletization following DLA packaging requirements. Inspection and acceptance will occur at the destination. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. The solicitation incorporates various federal and defense regulations, including the Buy American Act, DFARS cybersecurity reporting requirements, and restrictions on covered defense telecommunications equipment. Quotations are due by November 12, 2026, and must be submitted to the issuing office in Columbus, Ohio, or via the DIBBS portal.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-3097

Solicitation SPE7L1-27-T-3097 is a fixed-price, small business set-aside contract issued by the DLA Weapons Support Land Supply Chain for the procurement of one fluid pressure lube oil filter element, NSN 2940005413494. The required component must adhere to specific dimensions, including a 4 5/16 inch outer diameter, 9/16 inch inner diameter, and a length between 8.031 inches and 7 15/16 inches. A critical material restriction prohibits the intentional addition of mercury or mercury-containing compounds, except where specified by NAVSEA 5100-003D. The item is to be delivered FOB Origin to the III Corps Tactical Area at Fort Hood, Texas, with a required delivery date of April 10, 2026, and a delivery window of five days after the order. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, with the DLA Master List of Technical and Quality Requirements taking precedence. Palletization must follow RP001 requirements. Inspection and acceptance will occur at the destination per FAR 52.246-1. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment. The procurement is subject to various federal regulations, including the Buy American Act, DFARS cybersecurity reporting standards, and prohibitions on covered defense telecommunications equipment. Offerors are cautioned that additive manufacturing is prohibited unless specifically authorized.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-3101

Solicitation SPE7L1-27-T-3101 is a small business set-aside issued by the DLA Weapons Support Land Supply Chain for the procurement of seven operating arm assemblies for doors with the lever to the left, identified by NSN 2540-00-211-4450. The contract requires delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with an original required delivery date of October 22, 2025, and a need ship date of November 4, 2025. Terms are specified as FOB Origin, and inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and labeling standards, including RP001 DLA Packaging Requirements and MIL-STD-129. If materials are hazardous, suppliers must provide Safety Data Sheets in accordance with Federal Standard No. 313-E and follow the Hazard Communication Standard for labeling. The procurement is governed by various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

in 10 days

AI Contract Overview

Amendment 1 to solicitation 80GRC019P0042 for NASA GRC modifies the Statement of Work by removing the requirement for the system to interface with a 480VACLL input at 60Hz. This change does not extend the submission deadline. The procurement seeks a high voltage dual motor emulator to expand hybrid electric vehicle testing capabilities in Cleveland, Ohio. The required equipment must support two three-phase motors up to 275kW each or a single six-phase motor up to 550kW, with the ability to emulate permanent magnet and induction motors in four quadrant operation. Key technical specifications include support for phase currents from DC to 1500Hz AC, continuous sink capacity of 350Arms, and the ability to emulate various phase resistances, inductances, and faults. The system must communicate via CAN Bus, be water or WEG cooled, interface with 500VDC and 1000VDC power supplies without an isolation transformer, and include a graphical interface for command and control.

General Info

Agency

N/A

Contract Value

$262,900

NAICS

336390 - Other Motor Vehicle Parts Manufacturing

Place of Performance

NASA/Glenn Research Center 21000 Brookpark Road, CLEVELAND, OH, 44135, USA

Set-Aside

NONE

Awardee

D&V Electronics

Award Issued Date

09/20/2019, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

1 update

PhaseAwarded

PostedSep 3

Combined Synopsis

Notice updatedSep 10

The notice description changed.

AwardedSep 20

Contract was awarded

Submission Closed

09/20/2019, 12:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyN/A

Contacts1 person available

OfficeN/A

Organization / Agency

N/A

Office AddressN/A

Contacts

Raenala C. BrownContract Specialist

contact@example.gov

+1 (555) 000-0000

Full Description

Amendment #1 Solicitation # 80GRC019P0042 This amendment is to REMOVE the description in the SOW stating, "Shall be able to interface with a 480VACLL input at 60Hz" from the solicitation. There will be no extension of submission time due to this change. See below for the revised SOW: NASA GRC is looking to expand its hybrid electric vehicle testing capabilities with the procurement of a high voltage dual motor emulator. The capabilities of interest include a dual motor emulator that can individually meet the following: - Shall have the capability to operate as -Two three-phase motors with a minimum emulation capability up to 275kW/motor, 550kW combined -A six-phase motor with up to a 550kW emulation capability - Shall have the ability to emulate permanent magnet and induction motors in four quadrant operation - Shall have the ability to emulate positive and negative torque direction, and both clockwise and counterclockwise shaft direction. - Shall be able to accept phase currents from DC to a minimum of 1500Hz AC. - Shall be able to sink 350Arms continuous, 550Arms peak for a minimum of 30 seconds. - Shall have the ability to emulate phase resistances from zero to a minimum of 1 Ohm - Shall have the ability to emulate phase inductances from 30uH to a minimum of 2000uH - Shall be capable to emulate/monitor motor stator and rotor temperatures - Shall have the capability to be used enable injections of phase-to-phase, 3-phase, single-phase open, single-phase to ground, and encoder (or resolver) faults. - Shall have the ability to communicate over CAN Bus. - Shall have the capability to be water, or 50% WEG cooled. - Shall not require the use of an isolation transformer - Shall be able to interface with both 500VDC and 1000VDC power supplies for regeneration capability - Shall be supplied with a graphical interface to allow command and control of the motor emulator device