Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Pre-Solicitation opportunity from Department Of Defense was posted on August 7, 2014. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

DUAL PURPOSE IMPROVED CONVENTIONAL MUNITION REPLACEMENT

Closed
N0017814Q1013Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332993
New
Federal
155mm Modular Artillery for Combat Effectiveness (MACE)
Solicitation # W15QKN26R1C5R
The 155mm Modular Artillery for Combat Effectiveness (MACE) program, managed by the U.S. Army Contracting Command – Rock Island at Picatinny, is a solicitation for up to two prototype Other Transaction Agreements (OTAs) under 10 U.S.C. § 4022. The objective is to develop a manufacturable 155mm cargo-carrying artillery projectile system designed to expand domestic manufacturing capacity and modular payload capabilities. The project is structured in two phases: Phase I focuses on projectiles achieving a range of 30 to 35 km, while Phase II targets ranges exceeding 35 km. The prototypes must be compatible with M777A2 Lightweight Towed and M109A7 Paladin 39-caliber weapon platforms, with future adaptability for 52 or 55 caliber systems. Successful prototype completion may lead to a follow-on production contract of up to 10,000 systems per year, supporting a Milestone C production decision by the fourth quarter of FY29. The procurement process involves rigorous technical and administrative requirements, including the submission of a detailed Integrated Master Schedule (IMS) and a cost proposal based on FAR cost principles. Evaluation for Phase I prioritizes the schedule, while Phase II emphasizes technical design and technology maturity. Offerors must certify their business status, specifically regarding nontraditional defense contractor eligibility, and comply with the Buy America Act and National Technology and Industrial Base restrictions. Access to controlled technical data, such as purchase descriptions and drawings, requires the submission of a Non-Disclosure Agreement and a Military Critical Technical Data Agreement. The final response deadline for proposals was extended to October 30, 2026, with submissions required via SAM.gov in specific stand-alone volumes.
W6QK Acc-Ri-Picatinny

POSTED

4 days ago

DEADLINE

in 10 days
NAICS: 332993
DIBBS
49--TEST STAND,TORPEDO,WAR
Solicitation # SPE7M4-27-T-1136
Solicitation SPE7M4-27-T-1136 is a fixed-price request for quotations issued by the DLA Weapons Support Fluid Handling Division for 32 torpedo warshot test stands, identified by NSN 4921017264731. This procurement is a total small business set-aside under NAICS code 332993. Quotes must be submitted electronically via the DLA Internet Bid Board System (DIBBS) by October 23, 2026. The required delivery period is 164 days, with a need ship date of April 6, 2027, and an original required delivery date of October 15, 2027. Shipping is designated as FOB Origin, with the final delivery destination being the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to packaging and marking standards, specifically ASTM D3951 for general packaging, RP001 for palletization, and MIL-STD-129 for labeling. Inspection and acceptance will occur at the destination. Offerors must comply with domestic sourcing requirements, including the Buy American Act and the Berry Amendment, and must disclose any use of non-domestic materials. Additionally, the contract incorporates various federal and defense acquisition regulations regarding hazardous materials, cybersecurity, and the prohibition of certain foreign military company items. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

7 days ago

DEADLINE

in 3 days
NAICS: 332993
Federal
ARMY AMMUNITION MANUFACTURING INNOVATION INDUSTRIAL BASE INTEGRATION TEAM COMMERCIAL SOLUTIONS OPENING REQUEST FOR SOLUTIONS
Solicitation # AMIP-CSO
The Army Ammunition Manufacturing Innovation Industrial Base Integration Team is soliciting innovative commercial solutions through a Commercial Solutions Opening to modernize and enhance ammunition manufacturing capabilities. The program focuses on integrating advanced technologies such as additive manufacturing, robotics, artificial intelligence, and digital twins to create a more agile and resilient industrial base. Key objectives include accelerating digital transformation via IoT platforms and advanced analytics, improving supply chain resilience, enhancing workforce capabilities, and promoting sustainable manufacturing practices, all while maintaining strict compliance with DoD cybersecurity and readiness standards. Managed by the Joint Program Executive Office for Armaments and Ammunition, the solicitation allows for awards via fixed-price contracts or Other Transaction Agreements. The selection process is phased, beginning with the continuous acceptance of unclassified Phase I white papers and PowerPoint briefings, followed by Phase II pitch sessions, and concluding with detailed Phase III technical and price proposals. Evaluation is based on a peer or scientific review focusing on return on investment, technical merit, availability of funds, and private investment. Successful efforts are intended for funding in Fiscal Year 2026, with typical periods of performance ranging from two to five years. Large business offerors are required to submit comprehensive subcontracting plans targeting various small business categories.
W6QK Acc-Ri

POSTED

19 days ago

DEADLINE

in about 2 months

General Info

NAICS

332993 - Ammunition (except Small Arms) Manufacturing

Place of Performance

VA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

1 update
PhaseClosed
Posted

Sources Sought

Type Changed

Sources Sought → Presolicitation

Notice updated

Response deadline changed from Aug 11, 2014 to Aug 13, 2014. The notice description changed.

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nswc Dahlgren
Contacts1 person available
OfficeDAHLGREN, VA, 22448-5154, USA
Office AddressDAHLGREN, VA, 22448-5154, USA
Contacts
Debbie FrankContract Specialist

Full Description

Show more
DUE DATE AND TIME CORRECTED This synopsis is being posted to both the Federal Business Opportunities (FBO) page located at http://www.fbo.gov and the Navy Electronic Commerce on Line (NECO) site located at https://www.neco.navy.mil. While it is understood that FBO is the single point of entry for posting of synopsis and solicitations to the Internet, NECO is the alternative in case FBO is unavailable. Please feel free to use either site to access information posted by the Naval Sea Systems Command. This is a Request for Information (RFI) by the Naval Surface Warfare Center, Dahlgren Division (NSWCDD). This Request for Information is published in accordance with FAR Part 15.201(e), FAR Clause FAR Clause 52.215-3 and is for PLANNING PURPOSES ONLY. It does not constitute a Request for Proposal (RFP), or a commitment by the U. S. Government, nor should it be construed as such. Respondents are advised that NSWCDD is under no obligation to acknowledge receipt of information received, or provide feedback to respondents with respect to any information submitted under this RFI. There shall be no basis for claims against the Government as a result of any information submitted in response to this RFI. The Government does not intend to award a contract on the basis of this RFI, or reimburse RFI preparation costs incurred by any offeror when providing the information requested under this notice. If a solicitation is released at a future date, it will be synopsized on the Federal Business Opportunities (FedBizOpps) website. It is the responsibility of any potential offeror to monitor this site for additional information pertaining to this requirement. The Naval Surface Warfare Center, Dahlgren Division - Expeditionary Weapons Systems Branch (G31), in cooperation with The Marine Corps Systems Command's Fire Support Systems office (PdM-FSS) is issuing this Request for Information (RFI) to assist with planning for the replacement of the Dual-Purpose Improved Conventional Munition (DPICM) capability for the artillery community. The M483A1 and M864 155mm DPICM munitions will no longer be authorized for use after 2018 because they fail to meet the 1 percent Unexploded Ordinance (UXO) criteria established by the Department of Defense Policy memorandum dated 19 June 2008 (DoD Policy on Cluster Munitions and Unintended Harm to Civilians). The Marine Corps is interested in solutions that are effective against the same target sets the M483A1 and M864 munitions are designed to engage, this includes: individual area targets dispersed over a defined area, targets whose precise locations are not known, time-sensitive or moving targets, and massed formations of enemy forces. Furthermore, in order to review possible joint development with partner nations the USMC is interested in options compliant with DoD policy and the Convention on Cluster Munitions (CCM) treaty. Solutions which are compliant to DoD Policy on Cluster Munitions but not the CCM treaty are also of interest. The written response shall reference RFI number N00178-14-Q-1013. Responses to this RFI should not exceed twenty (20) pages and must contain the following information: a. General description of the proposed technology and how it addresses the UXO criteria b. A capability statement which includes information on the type(s) of technologies discussed, range, area covered, and engagement capability c. Technology Readiness Level (TRL) of each technology, and development timeline, 1) Are there any development efforts or test activities currently underway or planned to mature your product/technology and/or assess its maturity? 2) Describe the effort required to mature your advanced prototype product/technology to a fully tested, ready for production (i.e. DOD TRL 7 or higher) in terms of development time and expense. d. Rough Order of Magnitude (ROM) Cost; cost estimates for budgetary purposes only. Responses are due by August 13, 2014. Both e-mail and mail submittals will be accepted. Please send e-mail responses to the Contract Specialist, Debbie Frank at deborah.n.frank@navy.mil. Mailed responses should be sent to: Debbie Frank Contract Specialist, CS20 NSWCDD 17632 Dahlgren Road, Suite 102 Dahlgren, Virginia 22448-5110 Responses should include Company Name and Sources Sought Number in the subject line, and a short synopsis which includes the following items of information; CAGE Code, Company Name, address and telephone number, email address, technical point of contact, Company Size (please specify either Large, Foreign, Small, Small Disadvantaged, 8(a), Woman-Owned Small Business, HUBZone concern, Veteran-Owned Small Business, or Service-Disabled Small Business, and Company Qualification (i.e. current producer of XXX, can meet development requirement or any other information that indicates company qualification to develop a solution). This RFI utilizes the NAICS code 332993 with a small business standard of 122 employees. Information received shall be treated as Business Sensitive and will not be shared outside Government activities and agencies without permission of the provider. All responses should be unclassified. Information and materials submitted in response to this request will NOT be returned. If responses contain proprietary data, it shall be marked appropriately. It is the respondent's responsibility to clearly define to the Government what is considered proprietary data. Any responses to this announcement should reference synopsis number N00178-14-Q-1013, and should be directed to Debbie Frank, PHN 540-653-1456, or e-mail: deborah.n.frank@navy.mil.

More opportunities from Department Of Defense → Nswc Dahlgren

Same awarding agency

NAICS: 541330
New
Federal
N0017827R3105 AI_INTELLIGENT AUTOMATION SUPPORT SERVICES
Solicitation # N0017827R3105
The Naval Surface Warfare Center Dahlgren Division is seeking qualified personnel to provide Applied Artificial Intelligence and Intelligent Automation Support Services for the H60 Department under solicitation N0017827R3105. This effort focuses on integrating state-of-the-art automation, AI/ML, and Machine Learning Operations (MLOps) into current and future naval weapon systems across the entire acquisition lifecycle, from material solution analysis to fielding. The scope of work includes systems engineering, software and hardware development, cybersecurity, Assured AI test and evaluation, and human systems integration. The contractor will be responsible for implementing quality assurance frameworks, maintaining system safety in accordance with MIL-STD-882, and managing the packaging of validated models into secure artifacts. The anticipated contract is a five-year Level of Effort task order, consisting of a twelve-month base period and four twelve-month option periods, available to SeaPort-NxG IDIQ MAC holders. While the primary contract type is expected to be Cost-Plus-Fixed-Fee, a hybrid structure incorporating Firm-Fixed-Price elements may be utilized. Performance will occur primarily at the contractor's facilities, with some on-site requirements at NSWCDD. Key requirements include DCAA-approved accounting systems for subcontractors, specific Cyberspace Workforce certifications for information assurance personnel, and adherence to strict security protocols, including NSA Type 1 encryption for classified fiber connections and SEAD-3 reporting requirements.
Engineering Services

POSTED

4 days ago

DEADLINE

in 5 months
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS