Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

DUCT ASSEMBLY, AIR COND

Active
SPE4A7-27-T-2616Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE4A7-27-T-2616 is a federal procurement issued by the Defense Logistics Agency (DLA) Weapons Support ASC for one aircraft air conditioning-heating duct assembly, identified by NSN 1660-01-280-2809. The requirement is a total small business set-aside under NAICS code 331491, with a delivery timeline of 20 days after receipt of order (ADO) and shipping terms set as FOB Origin. Performance and delivery are centered at Tinker AFB. The procurement is subject to strict quality and technical standards, including compliance with SAE AS9003 or ISO 9001, and requires adherence to specific reference drawings and the DLA Master List of Technical and Quality Requirements. The contract contains significant regulatory constraints, including export controls under ITAR and EAR, requiring contractors to have approved US/Canada Joint Certification Program certification. Packaging must conform to ASTM D3951 and MIL-STD-129, with mandatory Item Unique Identification (IUID) per MIL-STD-130. Administrative requirements include the use of the Wide Area Workflow (WAWF) system for electronic invoicing and receiving reports. Additionally, the award is subject to the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting requirements for safeguarding covered defense information. Inspection and acceptance will occur at the origin per FAR 52.246-2.

General Info

DLA procurement for one aircraft air conditioning-heating duct assembly for Tinker AFB.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

331491 - Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

Place of Performance

3301 F AVE DR 22 BLDG 506, TINKER AFB, OK, 73145-9031, USA

Set-Aside

SBA

Documents

1
PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV
Office AddressUSA
Contacts
Shenita Tirado
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DUCT ASSEMBLY,AIR CONDITIONING-HEATING,A
RT001: MEASURING AND TEST EQUIPMENT
DUCT ASSEMBLY, AIR CONDITIONING-HEATING, AIRCRAFT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1660-01-280-2809 Quantity: 1 EA Purchase Request: 7018626766QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331491
New
DIBBS
Supply of Aerospace-Grade Raw MaterialsThis subcontract involves the supply of certified aerospace-grade raw metal stock to support prime contractors on projects for the DLA Weapons Support ASC under the Department of Defense. The selected provider must source materials that strictly adhere to the alloy and temper requirements specified in reference drawings, ensuring all deliveries include full traceability and Mill Test Reports. Performance for this contract will take place at Tinker AFB. The supplier is required to maintain strict compliance with the Buy American Act and the Berry Amendment. Interested parties must respond by November 10, 2026, regarding this requirement categorized under NAICS code 331491.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 331491
New
DIBBS
DUCT ASSEMBLY, AIR C
Solicitation # SPE4A7-27-T-2578
Solicitation SPE4A7-27-T-2578 is a request for quotations from the Defense Logistics Agency Weapons Support ASC for the procurement of two units of Duct Assembly, Air C, identified by NSN 1660-01-037-2026. The items must be delivered to the DLA Distribution Depot at Tinker AFB, Oklahoma, within 93 days after the award. The procurement is a total small business set-aside under FAR 19.5, and the government may apply the HUBZone price evaluation preference. Technical compliance is required according to several reference drawings, including 81205 BAC5300-2, 81205 204-67227, 13873 EI-010372026, and 81205 BAC5300-1. The contract mandates strict quality and security standards, requiring manufacturer inspection systems to comply with SAE AS9003 or ISO 9001. Inspection and acceptance will occur at the origin per FAR 52.246-2 and RQ009. Packaging must adhere to ASTM D3951 and MIL-STD-129, with specific requirements for Item Unique Identification per MIL-STD-130 and bare item marking per RQ017. Security requirements include CMMC Level 2 certification, adherence to DFARS 252.204-7012 for safeguarding covered defense information, and strict export controls under ITAR and EAR. Additionally, contractors must comply with the Buy American Act, the Berry Amendment, and use the Wide Area WorkFlow system for all invoicing and payment requests.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 331491
New
DIBBS
CABLE, RADIO FREQUENCY
Solicitation # SPE7M1-27-U-1011
Solicitation SPE7M1-27-U-1011 is a small business set-aside for the procurement of radio frequency cable, identified as a critical application item under NSN 6145-00-149-9176. The Defense Logistics Agency Weapons Support Maritime Supply Chain seeks an estimated quantity of 5,000 feet of cable, to be delivered in 500-foot spools. The material must be provided in continuous lengths, with specific restrictions on multiple unit packs based on the applicable advice code. Technical compliance is governed by MIL-DTL-17/127D(2) and MIL-DTL-17J(5) SUP 1, and the item is subject to Qualified Products List or Qualified Manufacturers List requirements. Delivery is required within 93 days after the order is placed, with terms set as FOB Origin. Packaging and marking must adhere to MIL-DTL-12000, MIL-STD-129, and MIL-STD-2073-1E, with a strict prohibition on the use of mercury or mercury compounds in preservation and packaging. The contract is an Indefinite Delivery/Indefinite Quantity type, and invoicing must be processed electronically through the Wide Area WorkFlow system. Additionally, the contractor must meet Cybersecurity Maturity Model Certification Level 2 self-assessment requirements and comply with various FAR and DFARS clauses regarding hazardous materials, domestic trade restrictions, and safeguarding covered defense information.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 331491
New
DIBBS
PLATE, METAL
Solicitation # SPE8E4-27-T-0209
Solicitation SPE8E4-27-T-0209 is for the procurement of two aluminum alloy high magnesium metal plates, measuring 0.750 inches thick, 60.00 inches wide, and 240.00 inches long. The material must conform to ASTM B928/B928M-15 (R 2023) and exact dimensional requirements, as test coupons are strictly prohibited. Delivery is required within 149 days after the order, with a required delivery date of January 7, 2027, shipping to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict quality and identification standards, including the submission of a Certificate of Quality Compliance (Mill-Material Certification) with every shipment. Continuous identification markings, such as the DLA contract delivery order number, NSN, and manufacturer details, must be applied via stamping or stenciling to avoid product rejection. Eligible awardees must be listed on the Qualified Suppliers List for Distributors (QSLD) and comply with various FAR and DFARS clauses, including the Buy American Act and specific cybersecurity safeguarding requirements. Invoicing and receiving reports must be processed through the Wide Area WorkFlow (WAWF) system.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331491
New
DIBBS
SHEET, METAL
Solicitation # SPE8E9-27-T-0397
Solicitation SPE8E9-27-T-0397 is a request for the procurement of nine sheets of cold-rolled annealed nickel metal (NSN 9535-00-277-7423) conforming to QQ-N-281, Class A. The material must have a nominal width of 36 inches, a length of 8 feet, and a thickness of 0.0620 inches, featuring a specific perforation pattern of 8 holes per square inch with 0.125-inch center-to-center distances. Technical requirements include a minimum tensile strength of 70,000 psi and a minimum yield strength of 28,000 psi. This is a critical application item requiring a Certificate of Quality Compliance (Mill-Material Certification) with every shipment. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). The contract is issued under the First Destination Transportation program with delivery required within five days after receipt of order, FOB Origin, to DLA Distribution San Joaquin in Tracy, California. Packaging must adhere to MIL-STD-2073-1E, RP001, and ASTM A700, with marking compliant with MIL-STD-129 and specific continuous identification requirements including the contract delivery order number, NSN, and manufacturer details. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and compliance with the Buy American and Balance of Payments Program. Inspection and acceptance will occur at the destination.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331491
New
DIBBS
CABLE, RADIO FREQUENCY
Solicitation # SPE7M1-27-U-1065
This small business set-aside solicitation, issued by the DLA Weapons Support Maritime Supply Chain, is for the procurement of radio frequency cable under NSN 6145013893427. The requirement is for an estimated quantity of 19,000 feet, with a guaranteed minimum of 2,850 feet and a quantity variance of plus or minus 5 percent. The contract is structured as a unilateral Indefinite Delivery Contract with a maximum value of 350,000 dollars and a delivery window of 86 days after receipt of order. The material must be provided in continuous lengths, specifically 500 feet per reel, and must adhere to the Qualified Products List or Qualified Manufacturers List. Technical compliance is governed by MIL-DTL-17/190C and MIL-DTL-17J, with strict prohibitions against the intentional addition of mercury. Quality assurance requires sampling according to MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-12000, while palletization must follow DLA requirement RP001. The contract incorporates various FAR and DFARS clauses, including those regarding cybersecurity reporting, the Buy American Act, and the Berry Amendment, with all invoicing and payment processed through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 331491
New
DIBBS
Supply of Nickel Alloy 400 Hot Finish Round BarsThis subcontract, issued by the Department of Defense through DLA DIST SAN JOAQUIN, requires the supply of 39 feet of Nickel Alloy 400 hot finish round bars. The materials must feature a 3.500 inch diameter with lengths ranging from 6 to 24 feet to support prime contractors delivering DLA Troop Support Construction and Equipment contracts. Performance will take place in Tracy, California, under NAICS code 331491. The contract is designated as a Women-Owned Small Business set-aside and mandates strict adherence to the Berry Amendment and the Buy American Act. All deliverables must comply with DLA Master List RA001 and meet the specific marking requirements outlined in MIL-STD-129 and MIL-STD-129R(3). The response deadline for this solicitation is November 12, 2026.
DLA DIST SAN JOAQUIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 331491
New
DIBBS
Class A Form 7 Annealed Nickel Wire SupplierThis subcontract involves the supply of high-precision, nonelectrical Class A Form 7 Annealed Nickel wire with a 0.125 inch diameter for the DLA Weapons Support Nuclear Reactor Program. The manufacturer must adhere to strict technical specifications, including QQ-N-281D(2), SAE AMS2807C, and QAP 13873 standards. The scope of work requires the delivery of 34.5 coils, which must be packaged according to MIL-STD-2073-1E, MIL-STD-129, and ASTM A700 guidelines. To be eligible, the supplier must maintain a QSLD listing for FSGs 95 and 96 and ensure full compliance with the Buy American Act and NIST SP 800-171 security standards. The project is managed under NAICS code 331491 for the Department of Defense, with the place of performance located in Tracy, California. Responses to this solicitation are due by November 12, 2026.
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 331491
New
DIBBS
CABLE, RADIO FREQUENCY
Solicitation # SPE7M1-27-T-1865
Solicitation SPE7M1-27-T-1865, issued by the DLA Weapons Support Maritime Supply Chain, is a request for quotations for the procurement of radio frequency cable identified by NSN 6145009189494. The requirement is divided into four line items totaling over 10,000 feet of cable, with specific quantities ranging from 3 feet to 5,898 feet. Deliveries are scheduled for various DLA distribution depots in Barstow, CA; Hill AFB, UT; Tinker AFB, OK; and Warner Robins, GA, with a general delivery lead time of 15 days. The items are identified as critical application commercial items and must adhere to technical specifications including MIL-DTL-17/113D, MIL-DTL-17J, and reference drawing 01365 99007B3700. The contract mandates strict adherence to quality and packaging standards, specifically MIL-DTL-12000 for cable preservation and MIL-STD-129 for marking. Packaging must comply with MIL-STD-2073-1E, and the item is subject to Qualified Products List (QPL) or Qualified Manufacturers List (QML) requirements. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting requirements. Inspection and acceptance will occur at the destination per FAR 52.246-2. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 331491
New
DIBBS
SHEET, METAL
Solicitation # SPE8E4-27-T-0191
Solicitation SPE8E4-27-T-0191 is a request for the procurement of 12 sheets of perforated nickel-copper alloy metal, Class A, in a cold-rolled condition. The material must meet precise dimensions of 0.062 inches thick, 36.00 inches wide, and 96.00 inches long, featuring 0.125-inch diameter perforations with a 0.250-inch center-to-center vertical distance staggered at 60 degrees. This is a critical application item that must comply with SAE AMS2807C and ASTM A700-14 standards. Delivery is required within 135 days, with the shipping destination being DLA Distribution San Diego. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). The contract mandates rigorous quality controls, including the submission of a Certificate of Quality Compliance (Mill-Material Certification) and adherence to Metal Certification Contract Data Requirements Lists (CDRLs). Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with specific requirements for continuous identification markings on each sheet. Inspection and acceptance will occur at the destination, and no test coupons are permitted. The procurement is subject to various FAR and DFARS clauses, including the Buy American Act and safeguarding requirements for covered defense information.
SAN DIEGO

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 331491
New
DIBBS
WIRE, NONELECTRICAL
Solicitation # SPE7M2-27-T-0607
Solicitation SPE7M2-27-T-0607, issued by the DLA Weapons Support Nuclear Reactor Program, is a small business set-aside for the procurement of 34.5 coils of nonelectrical nickel wire. The required material is Class A Form 7 annealed nickel, measuring 0.125 inches in diameter and 1250 inches in length per coil, with an approximate weight of 5 lbs per coil. This is designated as a critical application item and must comply with specific technical standards, including QQ-N-281D(2), SAE AMS2807C, and QAP 13873. Delivery is required within 121 days after order, with a target delivery date of July 17, 2027, shipping FOB Origin to DLA Distribution San Joaquin in Tracy, California. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96. The contract mandates strict adherence to environmental and quality standards, including the prohibition of Class I ozone-depleting chemicals and the intentional addition of mercury. Packaging and marking must follow MIL-STD-2073-1E, MIL-STD-129, and ASTM A700, while inspection and acceptance will occur at the destination. The procurement incorporates several federal regulations, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity requirements. Invoicing and payment must be processed through the Wide Area WorkFlow (WAWF) system.
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 331491
New
DIBBS
Nickel-Copper Alloy Plate SupplierThis subcontract opportunity through the Department of Defense DDSP New Cumberland Facility seeks a supplier to provide specialized Nickel-Copper Alloy, Class A, Form 6 metal plates. The required materials must be in Hot Finished As Rolled condition, measuring 0.750 by 36.00 by 120.00 inches, and must strictly comply with SAE AMS2807C Revision C standards. The order consists of two plates, each weighing approximately 1035.99 pounds, intended for prime contractors supporting DLA Troop Support contracts. Eligible bidders must possess a valid UEI, CAGE code, and active SAM registration. The procurement falls under NAICS code 331491, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must submit their responses by the deadline of November 9, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

4 days ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 332510
New
DIBBS
Supply of Turnlock Fastener ReceptaclesThis subcontract involves the supply of two Turnlock Fastener Receptacles, specifically part BACS22A32, manufactured or sourced according to Basic Drawing NR 81205 BACS22A Revision W. The contract supports prime contractors delivering to the Department of Defense via the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place in San Diego. The provider must adhere to strict technical and regulatory standards, including MIL-STD-129 for marking, RP001 and MIL-STD-2073-1E for packaging, and MIL-STD-1916 or ASQ H1331 for sampling plans. Additionally, the contract mandates full compliance with the Buy American Act and NIST SP 800-171 cybersecurity standards.
Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Manufacturing of Aileron Counter Balance ShieldsThis subcontract involves the manufacture and supply of four certified precision-machined aileron counter balance shields for prime contractors supporting DLA Weapons Support supply contracts. The components must be fabricated using aerospace-grade alloys and precision CNC machining in strict accordance with reference drawings 98897 STP51-302 (Rev AJ) and 98897 4J53005/1 (Rev K). All production must adhere to the DLA Master List of Technical and Quality Requirements (RA001). The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Robins Air Force Base. The contract falls under NAICS code 336413, with a response deadline set for November 10, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488510
New
DIBBS
MIL-SPEC Packaging and Export Logistics ProviderThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, requires a provider to perform specialized military packaging and export logistics for prime contractors. The scope of work involves packaging and marking items in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 standards, followed by the coordination of freight shipping and final delivery of components to King Abdullah Air Base in Saudi Arabia. The provider must maintain full compliance with DFARS 252.204-7012 and all applicable ITAR and EAR export regulations. This opportunity falls under NAICS code 488510 and was posted on November 2, 2026, with a response deadline of November 10, 2026.
Freight Transportation Arrangement

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
Fanning Strip Manufacturer (NSN 5975-01-35-4738)This subcontract involves the manufacture and delivery of five Fanning Strips for prime contractors supporting DLA Weapons Support ASC projects. The components must be produced according to NSN 5975-01-35-4738 specifications using JCP technical data. To ensure production quality, the manufacturer is required to implement quality management systems compliant with either SAE AS9003 or ISO 9001 standards. The selected provider must hold active ITAR, EAR, and JCP certifications to be eligible for the award. This Department of Defense requirement falls under NAICS code 335999 and is managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 493110
New
DIBBS
Aerospace Component Packaging and Marking ServicesThe Aerospace Component Packaging and Marking Services subcontract involves providing specialized packaging and marking for prime contractors supporting DLA supply contracts. The scope of work includes packaging components according to RP001 standards, performing bare item marking per RQ017, and applying hazard warning labels in compliance with DFARS 252.223-7001. To ensure government shipment readiness, the contractor will utilize industrial etching equipment and military-grade packaging materials to process nozzles. This project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Tinker AFB. The opportunity was posted on November 2, 2026, with a response deadline of November 10, 2026. It is categorized under NAICS code 493110.
General Warehousing and Storage

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
Lubricating Nozzle ManufacturerThis subcontract involves the manufacture of lubricating nozzles for prime contractors supporting DLA Aviation projects, specifically for NSN 2840-01-256-2029. The selected manufacturer is responsible for fabricating nozzles to strict military specifications, executing First Article Tests as outlined in CLIN 0002, and performing bare item marking according to RQ017. Due to the nature of the components, the contractor must utilize precision machining equipment and maintain full CSI compliance for Critical Safety Items. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Div, with performance taking place at Tinker AFB. The final deliverables include the finished lubricating nozzles and the required FAT certification. Interested parties must adhere to the response deadline of November 10, 2026, as specified in the solicitation.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
Aerospace Grade Material SupplyThis subcontract opportunity, titled Aerospace Grade Material Supply, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division. The contract involves the provision of raw materials and semi-finished components for prime contractors working on aircraft projects. All supplied materials must strictly adhere to specific Boeing specifications, including BMS8-80, BMS8-80V, BAC5004, BAC5300-1, BAC5300-2, BAC5307, and BAC5423, and must be delivered with comprehensive mill test reports. The project is designated as a Total Small Business Set-Aside under FAR 19.5 and falls under NAICS code 332999. Performance will take place at Tinker AFB. To ensure regulatory compliance, all materials must meet the requirements of the Buy American Act and the Berry Amendment. The response deadline for this solicitation is November 10, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Aircraft HVAC Duct Assembly ManufacturingThis subcontract opportunity is for the fabrication of air conditioning and heating duct assemblies to support DLA Weapons Support ASC aircraft projects. The selected contractor will manufacture assemblies in strict accordance with Reference Drawing NR 13873 012802809-18093 and EI-012802809, ensuring all units are completed and inspected. Compliance with MIL-STD-130 for IUID implementation and ASTM D3951 for packaging is mandatory. The project is a total small business set-aside under NAICS code 336413, with performance taking place at Tinker AFB. Qualified bidders must hold SAE AS9003 or ISO 9001 certification and maintain US/Canada Joint Certification Program approval. Responses are due by November 10, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541380
New
DIBBS
Quality Assurance and Certification for Critical Safety ItemsThis subcontract, titled Quality Assurance and Certification for Critical Safety Items, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The project involves providing independent verification and certification services for prime contractors, specifically focusing on the verification of Critical Safety Item tolerances using NIST-calibrated metrology equipment. The selected provider must execute sampling plans according to MIL-STD-1916 or ASQ H1331, prepare Source Approval Request documentation, and maintain strict SAE AS9100 compliance to deliver certified Inspection Reports and Certificates of Conformance. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, with the place of performance located in New Cumberland. Interested parties must submit their responses by November 10, 2026.
Testing Laboratories and Services

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Precision Fabrication of Accumulator AssembliesThis subcontract, titled Precision Fabrication of Accumulator Assemblies, is a total small business set-aside issued by the Department of Defense for the DLA Weapons Support ASC. The project requires the precision machining of three Accumulator Assemblies, specifically part number 47614, in accordance with provided technical drawings. The scope of work excludes additive manufacturing and mandates strict adherence to MIL-STD-1916 or ASQ H1331 for sampling, RQ017 for bare item marking, and MIL-STD-2073-1E for packaging and delivery. To be eligible, contractors must hold SAE AS9100 certification and maintain CMMC Level 2 compliance. The work is to be performed in New Cumberland, Pennsylvania. Interested parties must respond by November 10, 2026, to fulfill the requirements of this specialized fabrication effort under NAICS code 336413.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 313320
New
DIBBS
Supply of Military-Grade Textiles for Parachute PocketsThis subcontract involves the supply of military-grade raw textile materials and synthetic fabrics specifically intended for parachute pockets. The materials must strictly adhere to the DLA Master List of Technical and Quality Requirements for NSN 1670-00-988-3093 and be delivered as either certified raw fabric rolls or pre-cut textile kits. To ensure regulatory compliance, all sourced materials must meet the standards set by the Berry Amendment and the Buy American Act. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract is categorized under NAICS code 313320. Performance of the contract will take place at Tinker AFB. The solicitation was posted on November 2, 2026, with a response deadline set for November 10, 2026.
Fabric Coating Mills

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Manufacture of Parachute Pack Minimum Survival PocketsThis subcontract involves the full-scale fabrication and assembly of 631 Minimum Survival Pockets for prime contractors supporting DLA supply contracts. The work must be performed according to NSN 1670-00-988-3093 using industrial textile cutting and sewing equipment, with First Article Testing conducted at Wright Patterson AFB. Performance of the contract is centered at Tinker AFB. To be eligible, the contractor must hold SAE AS9003 or ISO 9001 certification and maintain US/Canada Joint Certification Program approval to ensure ITAR and EAR compliance. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Div.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS