Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

DUCT, EXHAUST, NONAIR

Active
SPE4A5-26-T-296EFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a DUCT, EXHAUST, NONAIR item with NSN 2835017328672 and part number 23069867, quantity of four units, to be delivered FOB origin within 393 days of contract award, with no tolerance for quantity variance. All items must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special marking codes applied. Packaging and palletization must adhere to DLA’s procurement guidelines, and delivery is directed to the designated receiving warehouse in Tracy, California. Inspection and acceptance occur at the destination. The contract incorporates technical and quality requirements from the DLA Master List, including sampling procedures based on MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are to be classified with defined verification levels or AQLs. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and the item is not subject to Item Unique Identification per customer request. The material has no shelf life constraint. The unit of issue is each, with a unit price of $4.00, totaling $16.00. The contract is governed under solicitation SPE4A5-26-T-296E, issued by the Department of Defense, with Caroline Simpson as the primary point of contact, and was solicited with a response deadline in July 2026 for delivery scheduled in August 2027.

General Info

Four exhaust ducts, NSN 2835017328672, $4 each, FOB origin,交付 Tracy CA, CMMC Level 2, no UI, MIL-STD compliant.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

333611 - Turbine and Turbine Generator Set Units ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A5-26-T-296E DLA Aviation Jul 21 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Caroline Simpson
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DUCT,EXHAUST,NONAIR
DUCT,EXHAUST,NONAIR
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS)
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
SPE4A5-26-T-296E
SECTION B
RT001: MEASURING AND TEST EQUIPMENT
ROLLS-ROYCE CORPORATION 63005 P/N 23069867
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017529515 0001 EA 4.000
NSN/MATERIAL:2835017328672
DELIVERY (IN DAYS):0393
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
SPE4A5-26-T-296E
SECTION B
PR: 7017529515 PRLI: 0001 CONT’D
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:08/26/2027 Original Required Delivery Date:08/26/2027
SPE4A5-26-T-296E NSN/Part Number: 2835-01-732-8672 Quantity: 4 EA Purchase Request: 7017529515QTY: 4 Delivery: 393 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333611
New
SLED
Booster Pump Housing Repair & Pump InspectionThe contract pertains to the repair of an existing booster pump housing and a comprehensive inspection of the pump to assess wear and operational integrity. The work is critical to ensuring the continued functionality and safety of the system, requiring skilled evaluation and restoration of compromised components. All repairs must meet industry standards for durability and performance, and the inspection must document the condition of internal and external parts to identify potential failure points or necessary future maintenance. The opportunity is posted as a subcontract under NAICS code 333611, which relates to pump and pumping equipment manufacturing, and is open for responses until August 6, 2026. The contracting entity is listed as Utah, with the opportunity hosted on the Utah Bonfire Hub platform. There is no specified set-aside status, and the place of performance and point of contact details are not provided, indicating that location and direct communication may be coordinated upon award. Interested parties must submit proposals by the deadline to be considered for execution of the repair and inspection services.
Utah

POSTED

about 18 hours ago

DEADLINE

in 16 days
View Details
NAICS: 333611
New
DIBBS
Centrifugal Pump Impeller SupplyThe contract involves the supply of four centrifugal pump impellers identified by NSN 4320012591587, requiring full adherence to military specifications for packaging, preservation, labeling, and delivery. All components must meet rigorous defense standards to ensure operational readiness and compatibility within military fluid handling systems. The work is to be performed in Tracy, California, with a delivery deadline tied to the government’s operational timeline, and the procurement is structured as a subcontract under NAICS code 333611 for pump and pumping equipment manufacturing. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, under the Department of Defense’s Fluid Handling Division. Though no specific set-aside classification is indicated, the contract is open to qualified subcontractors capable of meeting stringent military logistics and quality control requirements. The place of performance is firmly established at the Tracy facility with a zip code of 95304-5000, and all deliverables must be coordinated through the official DIBBS portal linked in the documentation.
FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333611
New
DIBBS
Centrifugal Pump Supply and DeliveryThe contract encompasses the supply and delivery of ISOTTA FRASCHINI centrifugal pumps identified by NSN 4320151004675 under an Indefinite Delivery Indefinite Quantity agreement, utilizing tiered pricing structures that adjust based on the volume of orders placed. This subcontract is managed by the Defense Logistics Agency under the Department of Defense and falls under NAICS code 333611, which corresponds to the manufacturing of industrial and commercial HVAC and refrigeration equipment, reflecting the specialized nature of the pumps. The contract remains active with a posted date of July 20, 2026, and performance locations are not specified, indicating a flexible delivery network aligned with defense logistics requirements. Pricing is structured to incentivize higher-volume procurement while maintaining consistent product quality and compliance with military specifications.
Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

N/A
View Details
NAICS: 333611
New
Federal
28--DUCT,EXHAUST,NONAIR
DLA Aviation

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 333611
New
Federal
BEARING ASSEMBLY,JOThe contract pertains to the procurement of the BEARING ASSEMBLY, JO under solicitation SPRMM1-26-Q-MF07, issued by SPRMM1 DLA Mechanicsburg on behalf of the Department of Defense. The requirement specifies the manufacture and delivery of 20 units, with a firm fixed-price structure and delivery due by June 26, 2026, under FOB destination terms to the specified delivery point. Technical compliance is governed by the NSN 7HH 2825-00-296-0690 PP and associated reference part numbers 90099 715J759A01 and 90099 715J759G01, with mandatory adherence to MIL-STD-130 Rev N for item marking and MIL-STD-2073 for packaging, including specific packing levels (A and B) based on shipment type, and MIL-STD-129 for labeling with full Procurement Instrument Identifier, Contract Line Item Number, and SubCLIN details. The product must meet strict quality standards, with the contractor responsible for all inspection activities throughout production, and records of all inspections required to be maintained for 365 days post-delivery. The government retains the right to inspect at any time, and the inspection and acceptance occur at the contractor’s facility under DLA Procurement Note E06. Award will be made using the Lowest Price Technically Acceptable (LPTA) evaluation method under DFARS 215.101-2-70(a)(1)(i), requiring strict compliance with all solicitation requirements as pass/fail criteria. Offerors must verify current SAM registration with accurate representations and certifications, and if not the original manufacturer, must disclose the OEM, CAGE code, and part number. Electronic submission of quotations via EDI is permitted but requires full disclosure of any deviations from solicitation terms; otherwise, awards will be made based solely on the stated requirements. All contractual documents are considered issued upon electronic transmission, and compliance with cybersecurity regulations including NIST SP 800-171 and FedRAMP Moderate baseline is mandatory for handling Controlled Unclassified Information. Invoicing and receiving reports must be submitted electronically through WAWF using the COMBO format, with payment and administrative functions routed via DoDAAC SPRMM1. Contractors are required to register for EDA to
SPRMM1 DLA Mechanicsburg

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333611
New
DIBBS
Manufacturing of V-Bank Coupling (Industrial Machinery)The contract entails the full manufacturing of 51 units of V-Bank Coupling, encompassing all stages from raw material procurement to final assembly and quality assurance, with strict adherence to defense technical standards. The work must be executed in compliance with militarized specifications, ensuring the product meets the rigorous performance and durability requirements mandated by the Department of Defense. All manufacturing processes, including machining and inspection, are to be carried out to guarantee conformance to defense-grade engineering and safety protocols. The contract is classified as a subcontract under NAICS code 333611, with the place of performance designated at Robins Air Force Base, Georgia, 31098-1887. The solicitation was posted on July 19, 2026, with a response deadline of July 27, 2026, managed by the ASC Commodities Division within the Department of Defense. Although no specific set-aside or organizational type is designated, the procurement is structured to support defense industrial capabilities and requires full accountability in supply chain sourcing and production control to meet operational readiness standards.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 333611
New
DIBBS
COUPLING, V-BANKThis contract pertains to the procurement of a V-BANK coupling, identified by NSN 2835-01-381-2702 and part number VC1508A-700-A, with a requirement for 51 units to be delivered FOB origin within 373 days of contract award. The item is source controlled and must be manufactured and tested in accordance with limited rights data that only qualified vendors with access to or traceability to approved sources may utilize. Strict compliance with DLA’s Master List of Technical and Quality Requirements governs all technical, quality, and packaging standards, superseding any other references such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 guidelines, with palletization and labeling conforming to DLA specifications. Inspection and acceptance occur at the destination, with zero non-conformances required in sampling unless otherwise stated, using MIL-STD-1916 or comparable zero-based sampling plans. Attributes are to be classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively, or AQLs of 0.1, 1.0, and 4.0. The vendor must comply with RQ006, RT001, and RQ042 requirements for quality conformance, measuring equipment calibration, and ISO 9001:2015-based quality systems. A Certificate of Quality Compliance and CDRL-COQC are mandatory, and a Source Approval Request (SAR) package is required if the vendor is seeking approval. Delivery is to be made to Robins Air Force Base, Georgia, with a required ship date of August 5, 2027, and no quantity variance is permitted. The contract is under solicitation SPE4A6-26-T-07TG, with point of contact Ashley Jones, and falls under NAICS code 333611 for industrial machinery manufacturing.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 333611
New
DIBBS
VANE ASSY, COMPR 5THThe contract pertains to the procurement of two units of a Vane Assembly, Compressor 5th, identified by NSN 2835-00-555-7633 and associated Rolls-Royce part numbers 23079560 and 6876105, under solicitation SPE4A5-26-T-294D. The delivery is fixed at five days after receipt of order, with FOB Origin terms meaning title and risk transfer upon tender at the contractor’s facility, and acceptance occurs at the same point. The total contracted value is $4.00, with no option quantities or price adjustments allowed. Deliveries must be routed to the General Depot of Naval Supplies in Kaohsiung, Taiwan, and packaging must strictly adhere to MIL-STD-2073-1E with preservation method 10 (cleaning and drying), unit container E5, and packing level B, all within the framework of DLA Packaging Requirements RP001. Marking must follow MIL-STD-129, incorporating barcoding and government identifiers, and critical items require direct bare part marking per RQ017, with no special external marking needed beyond standard requirements. Quality assurance is governed by zero-based sampling per MIL-STD-1916 or ASQ H1331 Table 1, with acceptance requiring zero non-conformances unless otherwise specified, and attributes are classified with strict AQLs: critical at 0.1 (Verification Level VII), major at 1.0 (Level IV), and minor at 4.0 (Level II). The item is designated a critical application, necessitating compliance with all technical and quality requirements listed in the DLA Master List, accessible via the provided portal. Cybersecurity protocols under NIST SP 800-171 and DFARS 252.204-7012 mandate safeguarding covered defense information, with mandatory cyber incident reporting within 72 hours. Contractors must comply with anti-trafficking, employment eligibility, hazardous materials labeling per 29 CFR 1910.1200, and prohibition on telecommunications equipment from designated foreign entities. All invoicing is exclusively via WAWF, and small business representations, including UEI and CAGE codes, must be current in SAM.gov. The solicitation is structured under a fixed-price arrangement with no trade-off evaluation noted
ASC SUPPLIER OPER OEM DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 333611
New
DIBBS
VANE, COMPRESSOR, NONThis contract solicits five compressor vanes for turbine engines, identified by part numbers K182P46 and K182P52 from General Electric Company, classified as commercial off-the-shelf items and critical application components. The item, with NSN 2835-00-602-6732, is not subject to shelf life requirements or hazardous material restrictions, though mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for functional use in portable fluorescent lamps, which must be shockproof and contain a secondary containment boundary per NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with sampling procedures mandated to follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise specified. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards, palletization per DLA packaging guidelines, and no special marking is required. Delivery is FOB origin with no quantity variance allowed, inspection and acceptance occurring at origin, and must be completed within 145 days from contract award, with a required ship date of December 20, 2026, and original delivery deadline of June 8, 2027. The item is to be delivered to DLA Distribution San Diego, and unit of issue is each, with a total contract value of $25.00. Documentation for source approval, defense information handling, and transportation logistics is governed by specified DLA procedural notes.
ASC SUPPLIER OPER OEM DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 333611
New
DIBBS
VANE ASSY, COMPR 9THThe contract is for the procurement of two units of the Vane Assembly, Compressor 9th, identified by NSN 2835005557731 and part number 6876109 from Rolls-Royce Corporation, with delivery required FOB origin within five days of award, and no later than July 21, 2026. The item is delivered to the General Depot of Naval Supplies in Kaohsiung, Taiwan, and must comply with comprehensive military packaging standards per MIL-STD-2073-1E, Level B, using Packaging Code Q, Unit Container E5, and Intermediate Container E5 with AAA quantity, while preserving the item using CLNG/DRY method 10 with no preservation material. Marking must follow MIL-STD-129, including bare item marking as required by RQ017, with no special marking needed and Item Unique Identification explicitly waived under DFARS 252.211-7003. Sampling for inspection must adhere to MIL-STD-1916 or ASQ H1331 Table 1 using zero non-conformances unless otherwise specified; unspecified attributes are treated as major, and MIL-STD-105/ASQ Z1.4 may be used only for sample sizing, not acceptance. The contract prohibits the intentional addition or direct contact of mercury or mercury-containing compounds except in functional applications such as batteries, lighting, sensors, weapon systems, or NAVSEA-specified chemical reagents, with portable fluorescent lamps and instruments requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. The contractor must comply with cybersecurity requirements per CMMC Level 2 Self-Assessment, NIST SP 800-171 DOD Assessment Requirements, and the safeguarding of covered defense information under 252.204-7012, alongside strict electronic invoicing via WAWF, avoidance of hexavalent chromium, and exclusion of items sourced from Communist Chinese military companies. Offerors must validate their size status, provide a UEI or CAGE code if applicable, and disclose any covered telecommunications equipment or services under 252.204-7017. Payment is to be processed electronically, and all contractual clauses, including equal opportunity, combating trafficking, employment verification, sustainable products, and small business subcontractor payment acceleration
ASC SUPPLIER OPER OEM DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 333611
New
DIBBS
Centrifugal Pump Supply and DeliveryThe contract entails the procurement and delivery of a single defense-compliant centrifugal pump identified by NSN 4320015965375, meeting all applicable military specifications for performance, materials, and quality assurance. The pump must be properly packaged to ensure integrity during transit and shipped with full traceability to Tinker Air Force Base, where it will be received and inspected under defense logistics protocols. The item falls under NAICS code 333611, indicating classification within the pump and pumping equipment manufacturing sector, and is governed under a subcontract arrangement managed by the Defense Logistics Agency on behalf of the Department of Defense. Although the solicitation number and specific point of contact are not provided, the transaction is documented through the DIBBS system with a publicly accessible award record linked to the contract identifier SPE7LX21D0007 and delivery reference SPE7L126FAU5K. The posting date indicates this contract was made available for execution in mid-2026, aligning with future defense supply cycle planning.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

N/A
View Details
NAICS: 333611
New
DIBBS
AC Engine Generator Supply and DeliveryThe contract pertains to the supply and delivery of a single commercial off-the-shelf AC engine generator unit identified by NSN 2920016546929 and part number TA30513, to be delivered to Mihael Kogalniceanu Air Base in Romania. Performance is governed by FOB origin terms, meaning the buyer assumes all transportation risks and costs once the item leaves the seller’s facility. The unit must be packaged, labeled, and shipped in strict compliance with Department of Defense logistics standards to ensure proper handling, identification, and receipt at the destination. The contract is classified as a subcontract issued under the Defense Logistics Agency, part of the Department of Defense, and is categorized under NAICS code 333611, which corresponds to the manufacturing of engines and turbines. The solicitation was posted on July 17, 2026, and the delivery must meet all federal and military logistical requirements without exception.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 541620
New
DIBBS
Hazard Communication & Labeling ComplianceThis contract requires strict adherence to the OSHA Hazard Communication Standard (29 CFR 1910.1200) and Defense Federal Acquisition Regulation Supplement (DFARS) requirements for the proper labeling of hazardous chemicals and the management of safety data sheets (SDS). The subcontractor must ensure all hazard warning labels are accurate, legible, and compliant with both federal and defense-specific regulations, and that SDS documentation is current, accessible, and properly maintained throughout the supply chain. Compliance is non-negotiable and must be implemented across all materials and processes tied to the performance location in Tracy, California, with a zip code of 95304-5000. The solicitation, issued under NAICS code 541620 for environmental consulting services, is managed by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION and is open for response until July 28, 2026, with submissions due by 5:00 PM EST. All work must align with defense procurement standards and demonstrate a clear capability to meet rigorous safety and documentation protocols for hazardous materials used in military supply operations.
Environmental Consulting Services

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance for Covered Defense InformationThe contract requires the implementation of NIST SP 800-171 security controls to safeguard Covered Defense Information and ensure compliance with cyber incident reporting obligations under DFARS regulations. This subcontract is focused on establishing a secure environment that meets federal cybersecurity standards for handling sensitive defense data, with specific attention to protecting information systems from unauthorized access, use, disclosure, disruption, modification, or destruction. The awardee must demonstrate the ability to fully comply with the 110 security requirements outlined in NIST SP 800-171 and maintain ongoing adherence to these controls throughout the contract period. Performance of this work is centered at Tracy, California, with a response deadline of July 28, 2026, and the contract is classified under NAICS code 541512 for computer systems design services. The contracting office falls under the Department of Defense, specifically the ASC SUPPLIER OPER OEM DIVISION, and the subcontractor must be prepared to support all aspects of cyber incident reporting as mandated, including timely notification, containment, and documentation of any security breaches affecting Covered Defense Information. Compliance is not optional and failure to meet these requirements may result in contract termination or other penalties.
Computer Systems Design Services

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 811212
New
DIBBS
IUID Marking and Registration ServicesThe contract requires permanent Unique Item Identification (IUID) marking on delivered valves in strict compliance with MIL-STD-130 standards, ensuring each valve is distinctly and durably labeled with a Data Matrix barcode and required metadata. This includes the application of high-grade durable labels capable of withstanding environmental and operational conditions throughout the item’s lifecycle, followed by the mandatory registration of each item’s unique identifier into the Department of Defense IUID Registry to enable full traceability and lifecycle management across the military supply chain. The work must be performed in accordance with DoD requirements for item identification, data accuracy, and registry submission timelines. This subcontract is issued under NAICS code 811212 and is set for performance in Tracy, California, with a zip code of 95304-5000. The solicitation closed on July 28, 2026, following its posting on July 20, 2026, and is managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. Failure to meet IUID marking specifications or registry registration deadlines may result in non-compliance penalties or delivery rejection, making adherence to the technical and procedural standards a critical component of contract fulfillment.
Computer and Office Machine Repair and Maintenance

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332913
New
DIBBS
Supply of Safety Relief Valve (Commercial Item)The contract involves the supply and delivery of a commercial safety relief valve identified by NSN 4820015278857, which includes all necessary packaging, labeling, and shipping arrangements. The item must be delivered under FOB Origin terms, meaning title and risk transfer to the buyer upon shipment from the seller’s location. The contract is categorized as a subcontract under the NAICS code 332913, indicating it relates to other fabrication and finishing activities for industrial machinery. The place of performance is specified as Tracy, California, with a zip code of 95304-5000, where the Defense Logistics Agency will receive the shipment. The solicitation was posted on July 20, 2026, with a response deadline of July 28, 2026, and is being managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. The contract is accessed via the DIBBS portal and is structured to procure a commercial off-the-shelf item to meet operational safety requirements.
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
Humidity-Temperature Probe Manufacturing and SupplyThe contract requires the manufacture and delivery of two units of a critical humidity-temperature probe designated by NSN 6685-01-491-5015, engineered to meet stringent defense, environmental, and packaging specifications mandated for military deployment. The product must be produced in full compliance with applicable defense standards, ensuring operational reliability under extreme conditions and secure handling throughout the supply chain. Delivery is expected to be made to the place of performance in New Cumberland, Pennsylvania, with the full set of quality assurances and documentation required for military acceptance. This is a subcontract solicitation issued by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, with responses due by July 28, 2026. The North American Industry Classification System code 334519 indicates the work falls under other electronic component manufacturing, aligning with precision sensor production. The solicitation is open to qualified suppliers capable of meeting the technical, logistical, and regulatory demands of defense-grade instrumentation, with no set-aside provisions specified. Interested parties must review the full requirements via the official DIBBS portal to ensure complete adherence to all contractual obligations and submission guidelines.
Other Measuring and Controlling Device Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Labeling, and Marking Services for Defense ShipmentThe contract requires the provision of packaging and labeling services in full compliance with MIL-STD-2073-1E for military-grade packaging and MIL-STD-129 for labeling, including barcoding to ensure end-to-end traceability of shipments within the Department of Defense logistics system. All work must meet strict military standards for durability, identification, and documentation to support secure and efficient movement of defense materials. The subcontract is issued by the ASC SUPPLIER OPER OEM DIVISION under the broader Department of Defense, with a response deadline of July 28, 2026, and is classified under NAICS code 493190, indicating its focus on support activities for warehousing and storage. The performance location and specific delivery details are not specified, but the requirement is for nationwide or global support consistent with defense supply chain logistics.
Other Warehousing and Storage

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
DIBBS
Supply of Bent Metallic Tube (NSN: 4710012008506)The contract seeks the supply and delivery of one bent metallic tube identified by NSN 4710012008506, manufactured to meet strict military specifications for material, dimensions, and performance. The product must comply with all applicable military packaging, marking, and shipping standards to ensure proper handling, identification, and transport throughout the defense logistics chain. The solicitation is classified as a subcontract under NAICS code 332999, indicating it pertains to other fabricated metal product manufacturing, and is issued by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. Bids must be submitted by the response deadline of July 28, 2026, with the opportunity posted on July 20, 2026. While no set-aside designation or point of contact information is provided, the place of performance and organizational address details remain unspecified, suggesting the delivery location and logistics are to be coordinated by the vendor in alignment with defense supply requirements. All proposals must be submitted through the official DIBBS platform linked in the posting.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332439
New
DIBBS
Supply of Wire Rope (Commercial Item)The contract seeks the procurement and delivery of one unit of wire rope compliant with both military and commercial standards, ensuring full adherence to specifications required by the Defense Logistics Agency. The item must be packaged, labeled, and shipped in strict accordance with DLA guidelines to guarantee proper handling, traceability, and acceptance upon receipt. The procurement is classified as a subcontract under NAICS code 332439, indicating it falls within the category of other fabricated wire product manufacturing. The place of performance is designated as San Diego, California, with a zip code of 92155-5584, indicating where the delivery must be made. The solicitation was posted on July 20, 2026, and responses are due by July 28, 2026, providing a narrow window for interested vendors to submit proposals. The contracting organization is the ASC Supplier Operation OEM Division under the Department of Defense, and all submissions must be made through the designated DIBBS portal linked in the contract details.
Other Metal Container Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
Supply of Commercial Weighing Scales (COTS)The contract calls for the procurement and delivery of 372 commercial off-the-shelf weighing scales that are fully assembled and fully compliant with National Stock Number (NSN) requirements and all U.S. Defense Logistics Agency technical specifications. Each unit must meet stringent standards for packaging, labeling, and quality control as mandated by DLA, with additional adherence to hazard communication protocols and sustainable product guidelines. If the contractor handles any covered defense information, compliance with NIST Special Publication 800-171 is required to ensure proper safeguarding of controlled unclassified information. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the Small Business Administration, with the North American Industry Classification System code 423450 applying to the procurement. The place of performance is designated as Texarkana, Texas 75507-5000, and responses are due by July 28, 2026, following the posting of the opportunity on July 20, 2026. The contracting activity is the ASC Supplier Operations OEM Division under the Department of Defense.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 811211
New
DIBBS
Calibration and Test Equipment ServicesThe contract seeks ISOIEC 17025 accredited calibration services for test and measuring equipment, ensuring all calibrations are traceable to national standards and fully compliant with either MILSTD1916 or ASQ H1331 requirements. This subcontract is issued by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, and the work must adhere to rigorous quality and accuracy benchmarks to maintain the integrity of measurement systems used in defense operations. The solicitation was posted on July 20, 2026, with a response deadline of August 20, 2026, and is categorized under NAICS code 811211 for calibration and repair services for measuring and testing equipment. While no specific place of performance or point of contact is provided, the service must be delivered to meet the high standards expected by a federal defense contractor, with an emphasis on precision, documentation, and regulatory compliance.
Consumer Electronics Repair and Maintenance

POSTED

about 23 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
DIBBS
Technical Data and Configuration Management SupportThe contract focuses on providing technical data and configuration management support aligned with Defense Logistics Agency standards and formal approval protocols. It requires the management of technical data, configuration changes, waivers, and deviations through established compliance procedures to ensure accuracy, traceability, and adherence to military specifications. All activities must follow defined DLA processes to maintain system integrity and documentation integrity across the lifecycle of defense-related equipment and systems. This subcontract, classified under NAICS code 541330, is issued by the ASC Supplier Operations OEM Division under the Department of Defense and is open for responses until August 20, 2026. The work is expected to support critical defense supply chain functions, with performance tied to the agency’s operational requirements. While specific location details are not provided, the nature of the work implies coordination across multiple defense platforms and logistics nodes. Interested parties must engage through the designated DIBBS portal to submit proposals in accordance with federal procurement guidelines.
Engineering Services

POSTED

about 23 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and CMMC Assessment SupportThe contract seeks to secure specialized support for achieving and maintaining CMMC Level 2 certification, focusing on comprehensive cybersecurity readiness across Department of Defense supply chain operations. This includes conducting a detailed gap analysis to identify deficiencies against NIST SP 800-171 requirements, aligning existing security controls with federal standards, and developing or updating critical documentation such as System Security Plans and Plans of Action and Milestones. The work is intended to ensure compliance with the Cybersecurity Maturity Model Certification framework, which is mandatory for contractors handling controlled unclassified information within the defense industrial base. This subcontract opportunity was posted on July 20, 2026, with a response deadline of August 20, 2026, and falls under NAICS code 541512 for computer systems design services. The requirement is issued through the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, and while no specific location for performance is indicated, the work is expected to support defense contractors nationwide. The nature of the scope suggests the selected provider must possess deep knowledge of CMMC requirements, NIST frameworks, and the ability to work closely with organizations transitioning into or maintaining compliance under this evolving regulatory landscape.
Computer Systems Design Services

POSTED

about 23 hours ago

DEADLINE

in about 1 month
View Details