Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Earthwork and Site Grading

Active

Federal

Response Deadline07/31/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Earthwork and Site Grading involves excavation, grading, and comprehensive site preparation activities necessary to establish a stable foundation for a control tower, including erosion control measures and soil compaction to meet engineering and regulatory standards. All work must be performed in Bremerton at the location designated for the control tower construction, ensuring compliance with environmental and safety protocols to prevent soil displacement and runoff during and after earthmoving operations. The contract is classified as a subcontract under NAICS code 237990, issued by the Naval Supply Systems Command Fleet Logistics Center Puget Sound, a Department of Defense agency. Proposals are due by July 31, 2026, with the solicitation posted on July 28, 2026. There is no set-aside designation specified, and the work is open to eligible subcontractors capable of delivering the required earthwork services with precision and adherence to federal construction and environmental guidelines. All performance must align with the technical requirements outlined for the control tower foundation site, with emphasis on long-term structural integrity and site stability.

General Info

Earthwork and grading for Bremerton control tower foundation, due July 31, 2026, open to eligible subcontractors.

Agency

Department Of Defense → Navsup Flt Logistics Ctr Puget SoundView Agency

NAICS

237990 - Other Heavy and Civil Engineering ConstructionView NAICS

Place of Performance

Bremerton, WA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineJul 31

Submission deadline

Response Deadline

07/31/2026, 12:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Flt Logistics Ctr Puget Sound

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Navsup Flt Logistics Ctr Puget Sound

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Excavation, grading, and site preparation including erosion control and compaction for the control tower foundation.

Similar Contracts

Same NAICS industry code

Site Grading and EarthworkThe contract for Site Grading and Earthwork involves excavation, grading, and compaction activities essential for preparing the site for building and infrastructure placement at Fort Stewart, Georgia, with a ZIP code of 31314. Operated under the Department of Defense through the W074 Endist Savannah office, this subcontract is categorized under NAICS code 237990, which pertains to other heavy and civil engineering construction. The solicitation was posted on July 29, 2026, with a response deadline set for August 6, 2026, at 4:00 PM, requiring interested parties to submit their proposals before this date to be considered for award. Work must be performed at the specified location, and bidders must comply with all scope requirements related to earthwork and site preparation for military infrastructure projects.

W074 Endist Savannah

POSTED

about 4 hours ago

DEADLINE

Calcasieu River and Pass Dredged Material Management Plan, CDF-22 DegradingThis contract is a Small Business Set Aside under NAICS code 237990 for Heavy and Civil Engineering Construction, targeting work related to the degradation of Confined Disposal Facility 22 along the Calcasieu Ship Channel in Louisiana. The scope includes clearing and grubbing, excavation, and placement of borrow material on the existing CDF and foreshore disposal area to achieve required grades, along with all operations incidental to these tasks. The estimated value ranges from $10 million to $25 million, and the award will be made as a single firm fixed price contract through an Invitation for Bid. The solicitation number is W912P826B0068, and it will be issued as a presolicitation notice on SAM.gov with no paper copies provided; potential offerors must monitor the site for the official release and any amendments. Registration in SAM.gov is mandatory to receive an award, and interested vendors are encouraged to register as Interested Vendors on SAM.gov and to post subcontracting opportunities on the SBA’s Subnet. The contracting office is located in New Orleans, Louisiana, under the U.S. Army Corps of Engineers, New Orleans District, with Nakiea Butler as the primary point of contact and Christopher Nuccio as secondary. The response deadline for the solicitation is August 11, 2026, at 2:00 PM.

W07V Endist New Orleans

POSTED

about 4 hours ago

DEADLINE

Fairport Maintenance DredgingThe U.S. Army Corps of Engineers is soliciting bids for a three-year maintenance dredging contract at Fairport Harbor, Ohio, under solicitation number W912P426BA013. This effort supports the continued navigability of the harbor by removing accumulated sediments, with work to be performed over the duration of the contract term. The solicitation, posted on July 29, 2026, with a response deadline of August 27, 2026, falls under NAICS code 237990 for other heavy and civil engineering construction and is administered by the Department of Defense through the Office of the Corps of Engineers in Buffalo, New York. Interested parties must submit proposals before the specified deadline, and all contract performance is expected to occur at Fairport Harbor, Ohio, though no specific address is listed in the performance location details. Primary point of contact for inquiries is Peter Gembala, reachable at 716-879-4221 or Peter.R.Gembala@usace.army.mil, with secondary support provided by Jeff Ernest at 716-879-4173 or Jeffrey.G.Ernest@usace.army.mil. The contract was previously referenced in presolicitation notice W912P426BA010, indicating prior engagement with industry stakeholders. No set-aside designation is specified, leaving the opportunity open to all eligible contractors. Additional information and the official solicitation document can be accessed through the SAM.gov portal using the provided link.

W072 Endist Buffalo

POSTED

about 4 hours ago

DEADLINE

Sources Sought - Multiple Award Construction Contract (MACC) U.S. Army Installations within Honshu, Japan and Yokota Air Base & its Geographically-Separated Units (GSUs), JapanThe U.S. Army is seeking information from qualified contractors for a Multiple Award Construction Contract (MACC) to support construction and maintenance projects at installations across Honshu, Japan, including Yokota Air Base and its geographically separated units. This sources sought notice, issued under solicitation number FA520927RNEWMACC, aims to gather market feedback to shape the upcoming procurement strategy for long-term facility infrastructure work. The NAICS code 237990 indicates the scope covers other heavy and civil engineering construction, with no set-aside designated, leaving the contract open to all eligible vendors. Interested parties must respond by August 17, 2026, and are encouraged to attend a vendor fair on August 28, 2026, at the Fussa Civic Hall in Tokyo, where government representatives will detail the MACC structure, upcoming project pipelines such as Water Line Phase B, Airfield Light projects, and Tower 3000, as well as other initiatives like the SABER acquisition and BPAs for fall protection and tower units. Pre-registration for the vendor fair is required via a Google Form by the stated deadline, though those who have already expressed interest to the primary or alternate point of contact are exempt. Primary contact for inquiries is Kenji Urasaki, with Yuki Watabe as the secondary point of contact, both reachable via phone and email listed in the posting.

FA5209 374 Cons Pk

POSTED

about 4 hours ago

DEADLINE

Source Sought - Simplified Acquisition Base Engineering Requirements (SABER)The U.S. Government is seeking information on the Simplified Acquisition Base Engineering Requirements (SABER) program, which will encompass maintenance, repair, and minor construction services across Yokota Air Base and various off-base locations in Japan, including geographical separated units and remote sites such as Chitose and Itazuke. The contract is intended to support critical infrastructure needs through a multiple award construction contract approach, with work expected to be performed primarily at Yokota but extending to other designated locations throughout the country. This sources sought notice, posted on July 29, 2026, and responding by August 17, 2026, aims to gather industry capabilities and interest before issuing a formal solicitation under NAICS code 237990. A vendor fair is scheduled for August 28, 2026, at the Fussa Civic Hall in Tokyo to provide potential contractors with an overview of the SABER acquisition and related opportunities, including three major open market projects and a blanket purchase agreement for fall protection devices. Government representatives will outline procurement strategies, timelines, and expectations to help industry prepare for upcoming solicitations. Interested parties are required to pre-register via a provided Google Form, unless they have already communicated intent to the primary or secondary point of contact, Yuki Kobayashi or Hiroshi Yoshikawa, who can be reached through U.S. Air Force channels. The notice does not establish a contract or obligation but serves as a preliminary step to shape the upcoming competitive procurement process.

FA5209 374 Cons Pk

POSTED

about 4 hours ago

DEADLINE

AIRFIELD 2028 ALL PROJECTS (AIP / AUI / CIRCUITS / FOD) CombinedThe contract encompasses a comprehensive range of airfield infrastructure upgrades at the Port of Seattle, focusing on safety, efficiency, and regulatory compliance. Key components include replacing aging airfield lighting circuits with low megger readings with new LED fixtures and signage to improve visibility and reduce energy consumption. Parallel efforts involve the replacement of deteriorating pavement sections and critical utility systems to maintain operational integrity and prevent disruptive failures. Wildlife hazard mitigation is also a central component, encompassing the removal of turf edge dams along runways and taxiways, installation of anti-perching devices on signs to deter birds, and addressing ponding through regrading and new storm drainage infrastructure to reduce attractants and enhance safety. Additionally, failing flush fire hydrant access hatches will be replaced to ensure rapid and unimpeded access for emergency services. The work is part of a broader initiative under the NAVSEA-sponsored program targeting airfield readiness through modernization, with all tasks scheduled for execution under the fiscal planning horizon of 2028. The contract is managed by the Aviation Project Management Group, with primary point of contact Yanet Maldonado available through the Port of Seattle for coordination and inquiries.

Aviation Project Management Group

POSTED

about 10 hours ago

DEADLINE

AIRFIELD 2029 ALL PROJECTS (AIP / AUI / CIRCUITS / FOD) CombinedThis contract encompasses a comprehensive package of airfield infrastructure improvements at the Port of Seattle, focused on enhancing safety, operational efficiency, and long-term sustainability. Key elements include the replacement of aging airfield lighting circuits with low megger readings, upgrading to modern LED lighting fixtures and signs to improve visibility and reduce energy consumption. Simultaneously, failing pavement sections and critical utilities will be replaced to ensure structural integrity and prevent service disruptions. Wildlife hazard mitigation efforts involve removing turf edge dams along runways and taxiways, installing anti-perching devices on airfield signage, and addressing ponding issues through regrading and the installation of new storm drainage infrastructure to reduce bird and animal attractants. Additionally, failing flush fire hydrant access hatches will be replaced to ensure rapid and unobstructed access for emergency response personnel. The work is classified under NAICS code 237990 and is being managed by the Aviation Project Management Group of the Port of Seattle, with Yanet Maldonado serving as the primary point of contact. The project is forecasted for future solicitation, with an anticipated timeline aligned with long-term airfield modernization goals.

Aviation Project Management Group

POSTED

about 10 hours ago

DEADLINE

AIRFIELD 2030 ALL PROJECTS (AIP / AUI / CIRCUITS / FOD) CombinedThe contract encompasses a comprehensive modernization and safety enhancement initiative at the airfield, focusing on upgrading aging infrastructure to improve operational efficiency and compliance with current standards. Key components include replacing airfield lighting circuits with low megger readings with new LED lighting fixtures and signs, enhancing visibility and energy efficiency while reducing maintenance demands. Parallel efforts involve the replacement of failing pavement sections and critical utilities to ensure structural integrity and reliability. Wildlife hazard management is addressed through the removal of turf edge dams along runways, taxiways, and access roads, installation of anti-perching devices on airfield signs, and mitigation of ponding via regrading and new storm drainage infrastructure to reduce attractants and bird activity. Additionally, failing flush fire hydrant access hatches will be replaced to ensure timely and unimpeded access for emergency responders. The project is part of the broader AIRFIELD 2030 program managed by the Port of Seattle’s Aviation Project Management Group, with Yanet Maldonado listed as the primary point of contact for inquiries.

Aviation Project Management Group

POSTED

about 10 hours ago

DEADLINE

Jack Block Park Pier ReplacementThe contract is for the demolition of an end-of-life pier at Jack Block Park and the construction of a new pier, along with associated repairs to the pier plaza. This project falls under NAICS code 237990 and is being managed by the Port of Seattle under the Northwest Seaport Alliance. The solicitation was posted on July 29, 2026, and is currently in forecast status, indicating it is a planned procurement not yet open for bidding. Point of contact for the project is Yanet Maldonado, with Valerie Huffman serving as the project manager. The work will take place at Jack Block Park, though the exact location details beyond the park name are not specified in the data provided. All inquiries should be directed to the provided contact information.

Northwest Seaport Alliance (NWSA)

POSTED

about 10 hours ago

DEADLINE

2027 Airfield Project - Contract 1The contract pertains to comprehensive airfield upgrades at the Port of Seattle, focusing on enhancing safety, operational efficiency, and regulatory compliance. Key elements include replacing aging airfield lighting circuits that exhibit low megger readings with modern LED lighting fixtures and signs to improve visibility and reduce maintenance demands. The project also entails the replacement of deteriorating pavement sections and critical utility systems supporting airfield operations, ensuring structural integrity and uninterrupted service. Wildlife hazard mitigation efforts involve removing turf edge dams along runways, taxiways, and access roads to discourage bird congregation, installing anti-perching devices on signage, and addressing ponding issues through regrading and new storm drainage infrastructure to eliminate standing water that attracts wildlife. Additionally, failing flush fire hydrant access hatches will be replaced to ensure rapid and unobstructed access for emergency response teams. All work is coordinated under the 2027 Airfield Project - Contract 1, with primary contact information provided by the Aviation Project Management Group under the Port of Seattle.

Aviation Project Management Group

POSTED

about 10 hours ago

DEADLINE

2027 Airfield Project - Contract 2The Port of Seattle’s Aviation Project Management Group is forecasting Contract 2 for the 2027 Airfield Project, which encompasses major infrastructure upgrades at the airfield. The scope includes replacing airfield lighting circuits that exhibit low megger readings with new LED lighting fixtures and signs to improve reliability and energy efficiency. Concurrently, failing pavement sections and critical utilities will be removed and replaced to ensure structural integrity and operational continuity. Wildlife hazard mitigation efforts involve removing turf edge dams along runways, taxiways, and access roads, installing anti-perching devices on airfield signs to deter birds, and addressing ponding issues through regrading and the installation of new storm drainage infrastructure. In addition, failing flush fire hydrant access hatches will be replaced to ensure rapid and unimpeded access for emergency response. The contract is classified under NAICS code 237990 and is anticipated to be awarded following a procurement process managed by the Port of Seattle. Primary point of contact for inquiries is Moraa Omwega, with David Neds serving as Project Manager.

Aviation Project Management Group

POSTED

about 10 hours ago

DEADLINE

T18 Lift Station ReplacementThe Port of Seattle through its Waterfront Project Management division is planning to replace the entire lift station located at the north lunchroom in Terminal 18. This project is forecasted to address critical infrastructure needs by removing and reinstalling a fully functional lift station system to ensure continued operations and compliance with maintenance and safety standards. The North American Industry Classification System code 237990 indicates the work falls under other heavy and civil engineering construction, suggesting the scope involves significant civil and mechanical coordination beyond basic plumbing or electrical work. The primary point of contact for inquiries is Angela Peterson, reachable via phone or email, with Crystal Cuellar serving as the project manager. The solicitation was posted on July 29, 2026, and while no solicitation number has been assigned yet, interested parties can access further details through the official Port of Seattle portal link provided. No set-aside preferences or specific location details beyond Terminal 18 have been disclosed at this stage.

Waterfront Project Management

POSTED

about 10 hours ago

DEADLINE

More opportunities from Department Of Defense → Navsup Flt Logistics Ctr Puget Sound

Same awarding agency

BRAND NAME OEM ALFA LAVAL INC GASKETSThe solicitation N0040626Q0351, issued by Naval Supply Systems Command Fleet Logistics Center Puget Sound, seeks genuine OEM gaskets from Alfa Laval Inc for the AquaBlue E1 C125-HW-FS fresh water generator aboard USNS JOHN LEWIS (T-AO 205), a requirement restricted under COMSCINST 4490.1C due to the parts being designated ship-critical safety items, allowing procurement only from the original equipment manufacturer or its authorized sources. The contract is a firm-fixed-price acquisition under RFO Part 12, structured as a total small business set-aside with a NAICS code of 334513 and a size standard of 750 employees, requiring offerors to self-certify as small businesses and optionally disclose other socioeconomic statuses such as HUBZone, SDVOSB, WOSB, EDWOSB, or 8(a) participation. All submissions must include a signed SF30 Page 1 and be received electronically by 6:00 AM Pacific Time on August 3, 2026, directed to Vicktoria Wright and Joseph Ibrahim, with an anticipated award in August 2026. Delivery is FOB destination to San Diego, California, with all shipments required to be pre-notified 48 hours in advance to MSCPAC_BATS@us.navy.mil and delivered to Military Sealift Command BATS at 9284 Balboa Avenue, San Diego, CA 92123-5000. All items must be packaged and marked in strict compliance with MIL-STD-2073-1 or ASTM D3951 standards, with wood packaging conforming to ISPM-15 and bearing official treatment certification. Labels must clearly display the vessel’s name and hull number, requisition and purchase order numbers, and remove any prior conflicting markings. Every unit must be uniquely identified with a two-dimensional data matrix using ECC200 symbology per MIL-STD-130 and ISO/IEC 16022, encoded with Application, Data, or Text Element Identifiers in accordance with ISO/IEC 15434, and all shipments must be electronically processed via Wide Area WorkFlow (WAWF) using the Invoice and Receiving Report format. Acceptance occurs upon physical receipt at the destination by the Government

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 4 hours ago

DEADLINE

MTU Detroit Diesel EnginesThe Fleet Logistics Center Puget Sound is seeking quotations for MTU Detroit Diesel 3-71 and 4-71 engines to replace existing units in Navy vessels, where technical manuals and engineering drawings mandate exact matching components to avoid systemic damage. Only original equipment manufacturer solutions from Rolls Royce Solutions America, Inc. are acceptable to ensure compatibility and operational integrity. All qualified vendors may submit proposals, and evaluations will be conducted under RFO 12.203, weighing technical merit, delivery schedule, price, and past performance without prioritizing any single factor. The solicitation is open to all responsible sources with no set-aside restrictions, and the North American Industry Classification System code is 335312. Responses must be submitted by August 4, 2026, with an anticipated award date later that month. The contracting officer is Homer Shoup, reachable at homer.o.shoup.civ@us.navy.mil, and the procurement is managed by the Department of Defense through the Naval Supply Systems Command in Bremerton, Washington.

Motor and Generator Manufacturing

POSTED

about 4 hours ago

DEADLINE

2815 BLOWER ASSEMBLYThe U.S. Navy’s Fleet Logistics Center Puget Sound is seeking quotes for a Blower Assembly under solicitation number N0040626Q0444, exclusively on a brand-name basis for Rolls-Royce Solutions America Inc., as the component is required to restore the engine to its original form, fit, and function. This solicitation is structured as a Small Business Set Aside, with the North American Industry Classification System code 333618, and responses must be submitted via email only. The contracting officer, Anna Rose M. Fulton, will evaluate proposals based on technical capability including delivery date, price, and past performance, with no weighting assigned to any factor. The government will assess price reasonableness and past performance as part of responsibility determinations in accordance with RFO 12.203. Technical documentation such as drawings, technical guides, and references are restricted and only accessible to firms registered in the Joint Certification Program; interested parties must provide their CAGE code and DD-2345 to obtain these materials. All submissions are due by August 4, 2026, with an anticipated award date in August 2026, and inquiries must be directed to the specified email address.

Other Engine Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

Freight and Delivery LogisticsThe contract requires the transport and final delivery of packaged industrial valves to Bremerton, Washington, with a strict delivery deadline of January 19, 2027. Each shipment must be assigned unique tracking identifiers to ensure full visibility and accountability throughout the logistics chain. Proof of delivery must be submitted in a format compatible with the Wide Area WorkFlow system to meet federal documentation standards. This is a subcontract under a Small Business Set Aside, designated as Total, meaning only small businesses are eligible to bid, and it falls under the NAICS code 484220 for truck transportation of freight. The solicitation was posted on July 28, 2026, with responses due by August 7, 2026. The acquiring agency is the Naval Supply Systems Command Fleet Logistics Center Puget Sound, operating under the Department of Defense, indicating the contract involves federal defense logistics requirements.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Packaging, Crating, and Marking ServicesThe contract requires the provision of military-compliant packaging, preservation, crating, and labeling services for industrial valves, with specific emphasis on moisture protection and adherence to ISPM-15 standards for wood crates. All packaging must include 2-inch stenciled markings to meet military identification and handling requirements, ensuring safe transport and inventory management under demanding operational conditions. The work involves full lifecycle preparation from initial wrapping and corrosion inhibition to final crate assembly and clear labeling, with strict compliance to defense-grade protocols for durability and environmental resistance. This is a Small Business Set Aside subcontract under the NAICS code 385110, issued by the Naval Supply Systems Command Fleet Logistics Center Puget Sound, part of the Department of Defense. The opportunity is open for responses until August 7, 2026, and performance is expected to support defense logistics needs without a specified geographic location. Only small businesses are eligible to respond, and the contractor must demonstrate capability in military packaging standards, experience with industrial valve handling, and proven compliance with federal preservation and labeling regulations.

POSTED

DEADLINE

Supply of 36-Inch Butterfly ValvesThe contract entails the procurement and delivery of eight 36-inch butterfly valves, all of which must fully comply with specified technical, packaging, labeling, and delivery requirements. The supplier is required to adhere to strict supply chain security standards and provide full disclosure of product origin to ensure traceability and compliance with federal regulations. This is a subcontract classified under a Small Business Set Aside, indicating that only small businesses are eligible to bid, with the North American Industry Classification System code 332912 confirming the scope as manufacturing related to miscellaneous fabricated metal products. The solicitation was posted on July 28, 2026, with a hard deadline for responses set for August 7, 2026, at 3:00 PM. The contracting entity is the Naval Supply Systems Command Fleet Logistics Center Puget Sound, under the Department of Defense, though specific place of performance and contact details are not provided in the data.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

Supply of 24-Inch Butterfly ValvesThe contract calls for the procurement and delivery of four 24-inch butterfly valves meeting stringent military standards for packaging, marking, and traceability. These valves must fully comply with all applicable technical specifications and be sourced exclusively from non-restricted vendors to ensure supply chain integrity. The requirement is structured as a subcontract under a Small Business Set Aside, designated as Total, meaning only small businesses are eligible to respond. The NAICS code 332912 confirms the specific industrial classification for fabricated metal product manufacturing relevant to valve production. The solicitation was posted on July 28, 2026, with a response deadline set for August 7, 2026, at 3:00 p.m. The contracting activity is managed by the Naval Supply Systems Command Fleet Logistics Center Puget Sound, operating under the Department of Defense. The place of performance and point of contact details are not specified, but delivery must align with military logistics requirements. The contract is accessible via the SAM.gov platform, and all proposals must adhere to the outlined compliance standards and small business eligibility criteria to be considered.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

Surveying and Site LayoutThe contract requires detailed topographic surveying, boundary verification, and precise layout of foundation and structural elements for a project located in Bremerton. The work involves accurate measurement and mapping of terrain features to establish legal boundaries and ensure the correct positioning of all structural components in accordance with engineering specifications. All deliverables must meet high standards of precision to support construction integrity and regulatory compliance. The solicitation is classified as a subcontract under NAICS code 541370, indicating it is within the scope of surveying and mapping services. It was posted on July 28, 2026, and responses are due by July 31, 2026, with no set-aside provisions applied. The contracting activity is under the Naval Supply Systems Command Fleet Logistics Center Puget Sound, part of the Department of Defense, and the place of performance is firmly located in Bremerton.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

Structural Steel ErectionThe contract pertains to the fabrication and erection of a structural steel framework for an air traffic control tower located in Bremerton, assigned under NAICS code 238120 for structural steel erectors. It is classified as a subcontract under the Department of Defense, specifically managed by Navsup Fleet Logistics Center Puget Sound, with a response deadline of July 31, 2026, and was posted on July 28, 2026. The work involves all necessary components to construct the steel skeleton of the tower, including material fabrication, transportation, and on-site assembly in compliance with federal construction and safety standards. Performance is required at the specified location in Bremerton, and no set-aside provisions are indicated, meaning any eligible subcontractor may respond. The opportunity is publicly accessible via the SAM.gov portal for qualified firms to submit proposals before the closing date.

Structural Steel and Precast Concrete Contractors

POSTED

DEADLINE

Concrete Foundations and Structural SlabsThe contract pertains to the formation, reinforcement, and pouring of concrete for foundations, slabs, and structural elements of a control tower, specifically under the NAICS code 238110 for concrete work. The work is to be performed at a location in Bremerton and is classified as a subcontract under the Department of Defense, with the Naval Supply Systems Command Fleet Logistics Center Puget Sound overseeing the procurement. The solicitation was posted on July 28, 2026, and responses are due by July 31, 2026, indicating a very short turnaround period typical for time-sensitive defense-related construction activities. No set-aside designation is specified, meaning the contract is open to all qualified subcontractors without restriction based on business size or other classification. The absence of a point of contact and detailed address information suggests that further details may be accessible through the provided SAM.gov link.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

Plumbing and Piping SystemsThe contract involves the installation of comprehensive plumbing and piping systems for a multi-story control tower, encompassing water supply, drainage, and sanitary piping components. This subcontract is issued under NAICS code 238220 and is managed by the Naval Supply Systems Command Fleet Logistics Center Puget Sound, a Department of Defense entity, with all work required to be performed in Bremerton. The opportunity was posted on July 28, 2026, with a firm response deadline of July 31, 2026, indicating a narrow window for submissions. The scope requires precision and adherence to military standards for infrastructure critical to operational facilities, with no set-aside provisions specified, meaning eligibility is open to all qualified subcontractors. Work must meet stringent technical and safety requirements typical of defense-related construction projects.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Electrical Installation and WiringThe contract outlines the installation of electrical systems for commercial buildings, encompassing conduits, wiring, outlets, and lighting fixtures, under the NAICS code 238210 for electrical contracting. It is designated as a subcontract and is managed by the Naval Supply Systems Command Fleet Logistics Center Puget Sound, a Department of Defense entity, with performance specifically required in Bremerton. The solicitation was posted on July 28, 2026, and responses are due by July 31, 2026, indicating a narrow window for submission. No set-aside provisions or specific organizational preferences are indicated, and while the point of contact and full address details are not provided, the work location is clearly identified. Interested parties must submit proposals through the designated SAM.gov portal prior to the deadline to be considered.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE