Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

ECS Valve Teardown, Evaluation, and Repair

Active

Response Deadline11/23/2026, 09:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with the Department of the Navy, managed by Navsup Weapon Systems Support, involves the teardown, technical evaluation, and repair of an Environmental Control System valve, specifically NSN 7RH 1660-01-668-6579 P8. The selected contractor will perform repairs and modifications according to technical data using precision measurement tools and specialized pressure and flow testing rigs to deliver a fully repaired and certified component. The project is based in Philadelphia and requires strict adherence to AS9100 quality standards and Buy American compliance. Interested parties must submit their responses by November 23, 2026, under NAICS code 336414.

General Info

Agency

Department Of The Navy → Navsup Weapon Systems Support

NAICS

336414 - Guided Missile and Space Vehicle Manufacturing

Place of Performance

PHILADELPHIA, PA, 19111-5098, USA

Set-Aside

NONE

Documents

This scope was carved out of N0038326QLB15.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

VALVE,ECS — 1660016686579 — N0038326QLB15

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 23

subcontract

Response DeadlineNov 23

Submission deadline

Response Deadline

11/23/2026, 09:30:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → Navsup Weapon Systems Support

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of The Navy → Navsup Weapon Systems Support

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs teardown, technical evaluation, and repair of an Environmental Control System (ECS) valve for prime contractors on Department of the Navy projects. Executes repairs and modifications per technical data for NSN 7RH 1660-01-668-6579 P8 using precision measurement tools and ECS pressure/flow testing rigs. Requires AS9100 quality standards and Buy American compliance. Delivers a fully repaired and certified ECS Valve.

Similar Contracts

Same NAICS industry code

First Article Testing (FAT) SupportThis subcontract for First Article Testing Support involves the initial production and validation testing of a First Article unit for prime contractors working on DLA Weapons Support projects. The selected provider is responsible for producing one test unit and coordinating its delivery to the 809 MXSS/MXDEB at Hill AFB, UT, for official government validation. The final deliverables include the validated First Article unit and all associated test data. The project is managed by the Department of Defense under the DLA Weapons Support Electrical Devices Division and will be performed in San Diego, California. Due to the nature of the work, the contractor must maintain JCP certification and ensure full ITAR compliance. Interested parties should note the response deadline of November 2, 2026.

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Avionics Installation & Integration (Field Service)This subcontract opportunity, titled Avionics Installation and Integration (Field Service), involves the physical installation and integration of Link 16 systems on US Air Force MC-130J aircraft platforms. The selected contractor will be responsible for installing hardware and wiring, performing system integration, and conducting inspections and testing in accordance with Government-approved engineering data. The ultimate goal is to deliver fully installed and operational Line of Sight Link 16 capability using specialized avionics tooling. Managed by the Department of Defense under agency FA8509 Aflcmc Wiuka, the project falls under NAICS code 336414. Due to the nature of the work, a Secret security clearance is required. The solicitation was posted on October 22, 2026, with a response deadline of November 5, 2026.

FA8509 Aflcmc Wiuka

POSTED

DEADLINE

Renewable Propulsion System Development (Solar Sails)This subcontract involves the design, development, and manufacture of renewable propulsion systems, specifically solar sails, for prime contractors supporting DARPA Cattle Run projects. The scope of work focuses on engineering high-strength, low-mass sail membranes, precision deployment booms, and the underlying propulsion physics to deliver a fully flight-ready renewable propulsion module. Managed under the Department of Defense and the Defense Advanced Research Projects Agency, the project requires strict adherence to security and eligibility standards. Qualified candidates must hold U.S. Citizenship and maintain CMMC Level 2 or NIST SP 800-171 Rev 2 compliance. The opportunity was posted on October 22, 2026, with a response deadline of November 4, 2026.

Defense Advanced Research Projects Agcy

POSTED

DEADLINE

Aircraft Access Door Parts/Materials SupplyThis subcontract involves the supply of aerospace-grade replacement parts, seals, and hardware for aircraft access doors to support prime contractors on Navsup Weapon Systems Support projects. The scope specifically focuses on components associated with NSN 1560-01-560-8326 QE, requiring all materials to be packaged according to MIL-STD-2073 standards. The contractor is responsible for providing certification of origin to ensure compliance with the Buy American and Balance of Payments Program requirements. This Department of Defense initiative falls under NAICS code 336414, with a response deadline set for November 23, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

in about 1 month

Aircraft Door Teardown, Repair, and ModificationThis subcontract involves the teardown, evaluation, repair, and modification of aircraft doors for prime contractors supporting Navsup Weapon Systems Support projects. The scope of work includes executing carcass restoration to A condition and the preparation of Engineering Change Proposals in accordance with DI-SESS-80639E, ultimately resulting in the delivery of a fully restored aircraft door. Qualified providers must possess specialized facilities for aircraft structural repair and maintain certification under ISO 9001 or SAE AS9100. Additionally, all work must comply with the Buy American Act and DFARS specialty metals standards. The response deadline for this opportunity is November 23, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

in about 1 month

Aircraft SSE Component Repair and Modification (NSN 5998-01-567-3889)This subcontract focuses on the repair and modification of aircraft Special Support Equipment, specifically NSN 5998-01-567-3889, for prime contractors supporting Navsup Weapon Systems Support under the Department of Defense. The scope of work involves the complete teardown, technical evaluation, and disassembly of components to perform necessary repairs and modifications. All activities must adhere to the technical requirements outlined in Section C and utilize Technical Data Package Version 001 to ensure all units are returned to Ready-for-Issue status. The contractor is responsible for employing specialized aviation test equipment to verify that all modified and repaired SSE units meet strict operational standards. This project falls under NAICS code 336414 and requires the delivery of fully serviceable equipment. Interested parties should note the response deadline of December 28, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Sole Source to Raytheon | Ukraine PATRIOT Depot Test Equipment (DTE)

Solicitation # SPRRA2-27-R-SP03

The Defense Logistics Agency is conducting market research via a Sources Sought Synopsis to identify qualified manufacturers and suppliers to support the operational readiness of the Ukraine Phased Array Tracking Radar for Intercept on Target (PATRIOT) System. The requirement involves providing Depot Test Equipment (DTE), including PAT243 Oil Processing Stations, PAT24X High Voltage Power Supply Test Stations, CLET TS Cooler Liquid Electron Tube/Transmitter Pumping Unit Test Stations, CDU Testers, Raytheon Test Automatic Continuity Stations (RTACS), and PAO Processors. Additionally, the scope includes site surveys, installation, on-the-job training, installation kit electronic equipment, gold units or emulators, and a five-year supply of test station spares. The government intends to award this contract to Raytheon as the sole responsible source under FAR 6.302-1(a)(1). The selected contractor will be responsible for all recurring and nonrecurring engineering, supply chain management, logistics, and the procurement of long-lead parts. Performance timelines are measured in months after contract award, with site surveys due at 26 months and various hardware deliveries ranging from 31 to 50 months. Essential government furnished property, including a compliant facility and specific fluids such as PAO and EGW, will be provided to support installation and acceptance testing.

Al DLA Aviation At Huntsville

POSTED

DEADLINE

Manufacturing of Aircraft Sleeve Nuts (PN: 83946S-820)This subcontract involves the precision CNC machining and supply of specialized aircraft sleeve nuts, specifically part number 83946S-820 (NSN: 1680-014826603), for prime contractors supporting the Department of Defense DLA Weapons Support ASC. The manufacturer must ensure all components meet strict aerospace tolerances and adhere to rigorous quality control and logistics standards, including MIL-STD-1916 or ASQ H1331 sampling plans, as well as MIL-STD-2073-1E and MIL-STD-129 for packaging and marking. Additional critical requirements include full supply chain traceability and compliance with SPRS assessments. The project falls under NAICS code 336414 and is managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div. Interested parties should note the response deadline of October 27, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

ITQ for iCDPSC (W8703-270048)

Solicitation # WS5811229992

Public Services and Procurement Canada, acting for the Department of National Defence, has issued an Invitation to Qualify for the Interim Canadian Deep Precision Strike Capability. This solicitation seeks to identify qualified suppliers for the future procurement of land-based launch systems, conventional precision-guided munitions, and essential supporting infrastructure, including command-and-control systems, communications, training, and technical maintenance. The objective is to establish an Initial Operational Capability that is deployable, survivable, and interoperable with allied forces to deliver precise effects at extended ranges within contested environments. This opportunity is open to Canadian suppliers as well as those from Ukraine, the NATO community, and the Five Eyes Alliance. Interested parties must respond to solicitation number WS5811229992 by the deadline of November 2, 2026. The process is managed by the Department of Public Works and Government Services, with the primary point of contact being Mark Milloy.

Department of Public Works and Government Services

POSTED

DEADLINE

Manufacturing and Supply of Flexible Tube Coupling Assembly (NSN 4730011993052)This subcontract involves the manufacturing and supply of one flexible tube coupling assembly, identified by NSN 4730011993052, for the USS CHAFEE DDG 90. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division. The contractor is required to fabricate the assembly according to Lockheed Martin Corporation specifications and ensure delivery to the designated performance location in FPO. Strict adherence to quality and logistical standards is mandatory for this contract. Quality control must be implemented per SAE AS9003 or ISO 9001, with sampling conducted according to MIL-STD-1916 or ASQ H1331. Additionally, all packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. The solicitation was posted on October 20, 2026, with a response deadline of October 28, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Non-Destructive Testing (NDT) / Inspection ServicesThis subcontract for Non-Destructive Testing (NDT) and Inspection Services supports prime contractors on NAVSUP Weapon Systems Support projects within the Department of Defense. The scope of work involves performing specialized inspections on wheel halves to identify structural failures or fatigue using visual, Magnetic Particle, Dye Penetrant, or X-ray testing methods. All units must be verified against technical drawings by personnel holding ASNT or equivalent aviation certifications, with the final deliverables consisting of detailed inspection reports and structural integrity certifications. The opportunity is categorized under NAICS code 336414 and was posted on October 20, 2026. Interested parties must submit their responses by the deadline of November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aircraft Wheel Overhaul & Repair ServicesThis subcontract for Aircraft Wheel Overhaul and Repair Services involves performing technical overhauls of aircraft wheel halves for prime contractors supporting NAVSUP Weapon Systems Support projects. The scope of work includes the disassembly, cleaning, degreasing, and inspection of wheel halves to identify defects or wear. The contractor is responsible for component repair, replacement, and reassembly specifically using tooling for part number A37952, with all units marked according to MIL-STD-130 standards. The primary deliverable for this project is 87 overhauled and tested wheel halves delivered in Ready For Issue condition. This effort falls under NAICS code 336414 and is managed under the Department of Defense. The solicitation was posted on October 20, 2026, with a response deadline of November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

More opportunities from Department Of The Navy → Navsup Weapon Systems Support

Same awarding agency

Supply of Replacement Parts for High Stage Precooler (P/N 3214446-4)This subcontract involves the supply of replacement materials and internal components for High Stage Precoolers, specifically part number 3214446-4, to support prime contractors on US Navy NAVSUP Weapon Systems Support projects. The selected provider must source parts that adhere strictly to OEM specifications or approved technical publications and provide Certificates of Conformance for all delivered items. Performance of the contract takes place in Philadelphia and requires strict adherence to MIL-STD-2073 packaging standards. Additionally, the provider must ensure full compliance with the Buy American and Balance of Payments Program certifications as mandated by DFARS. The solicitation was posted on October 23, 2026, with a response deadline of November 23, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Repair and Overhaul of High Stage Precooler (P/N 3214446-4)This subcontract involves the repair, overhaul, and upgrade of High Stage Precoolers (Part Number 3214446-4) to support prime contractors on US Navy NAVSUP Weapon Systems Support projects. The scope of work includes initial troubleshooting, the replacement of defective components, and the restoration of units to Ready for Issue condition in strict accordance with approved technical publications. The successful contractor is required to deliver five RFI precoolers accompanied by comprehensive test reports and process control documentation. Performance will take place in Philadelphia, and the contractor must maintain ISO-9001 or SAE AS9100 certification along with ANSI/NCSL Z540 calibration standards. This opportunity falls under NAICS code 811210 and is managed by the Department of the Navy. Interested parties must submit their responses by November 23, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

in about 1 month

High-Temperature Aviation Wiring Supply and InstallationThis subcontract for High-Temperature Aviation Wiring Supply and Installation involves the provision and installation of specialized aviation-grade wiring for engine blower units supporting prime contractors on NAVSUP Weapon Systems Support projects. The scope of work requires the removal of legacy MIL-W-81381 wire and the installation of SAE-AS22759 series wire, ensuring all soldering and assembly adhere to IPC/EIAJ-STD-001C standards. The final deliverables must be wired blower assemblies that meet all applicable SAE standards. The project is managed by the Department of the Navy and will be performed in Philadelphia. Contractors must ensure strict compliance with Buy American clauses and DFARS 252.204-7012 regulations. The solicitation was posted on October 23, 2026, with a response deadline of November 23, 2026.

Storage Battery Manufacturing

POSTED

DEADLINE

in about 1 month

Engine Blower Teardown and Repair ServicesThis subcontract with the Department of the Navy's Navsup Weapon Systems Support involves the teardown, evaluation, repair, and modification of 10 Engine Blowers for aviation projects. The scope of work includes the complete disassembly of units, mechanical and electrical restoration, and rigorous testing to meet solicitation requirements. Technical specifications mandate the use of SAE-AS22759 series wire and MIL-STD-130 marking tools, and the contractor must maintain Government-approved source status for all flight-critical hardware. The project will be performed in Philadelphia, with the final deliverable consisting of 10 repaired blowers accompanied by their respective historical record files. Interested parties should note the response deadline of November 23, 2026, for this effort categorized under NAICS code 336412.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

in about 1 month

Precision Parts Supply for Electromechanical ActuatorsThis subcontract, titled Precision Parts Supply for Electromechanical Actuators, involves the manufacture and supply of replacement parts, fasteners, and internal components for Electromechanical Actuators under NSN 2910-01-696-9261. Supporting prime contractors on US Navy and DLA projects, the provider must ensure all parts conform to TDP Version 001 and maintain an ISO/AS:9000 quality system. Deliverables include the certified replacement components along with comprehensive inspection reports covering dimensional, material, finish, and process certifications. Managed by the Navsup Weapon Systems Support within the Department of the Navy, the contract falls under NAICS code 334418. The place of performance is located in Philadelphia, Pennsylvania. Interested parties should note the posting date of October 23, 2026, with a response deadline of October 28, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Electromechanical Actuator Repair and Testing ServicesThis subcontract for Electromechanical Actuator Repair and Testing Services supports US Navy and DLA projects through the Department of the Navy's Navsup Weapon Systems Support. The scope of work involves the teardown, evaluation, repair, and modification of Electromechanical Actuators under NSN 2910-01-696-9261. The selected provider will disassemble units to assess wear, implement corrective actions according to TDP Version 001, and validate overall performance using specialized testing equipment. All work must be performed in compliance with Mil-I 45208A or ISO/AS:9000 standards, with final deliverables including the repaired actuators and detailed failure analysis reports. The place of performance is located in Philadelphia, Pennsylvania. This opportunity is categorized under NAICS code 335312 and was posted on October 23, 2026, with a response deadline of October 28, 2026.

Motor and Generator Manufacturing

POSTED

DEADLINE

Pulse Generator Component SupplyThis subcontract involves the supply of OEM or approved equivalent electronic parts, materials, and hardware necessary for the repair and upgrade of Pulse Generators, specifically part number 459659-2. Supporting prime contractors on projects for the Department of the Navy via NAVSUP Weapon Systems Support and NSWC Crane, the provider must ensure all components adhere to strict technical specifications and dimensional requirements. The scope of work includes providing material certifications and dimensional readings, with all items packaged according to MIL-STD-2073-1 and MIL-STD-129 standards. Performance for this contract is based in Philadelphia, Pennsylvania, under NAICS code 334418, with a response deadline set for November 23, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

in about 1 month

Pulse Generator Repair and Overhaul ServicesThis subcontract for Pulse Generator Repair and Overhaul Services supports NAVSUP Weapon Systems Support and NSWC Crane projects. The scope of work involves the teardown, evaluation, repair, overhaul, upgrade, and testing of Pulse Generators under NSN 6625014265. The contractor is responsible for disassembling units to identify failures, replacing faulty internal components, and conducting final acceptance testing to deliver ready-for-issue units along with detailed inspection reports. To qualify, the provider must maintain calibration systems that meet ANSI/NCSL Z540.03 or ISO-10012-1 standards and hold ISO 9001 or AS9100 certification. The performance of these services is located in Philadelphia, Pennsylvania. The solicitation was posted on October 23, 2026, with a response deadline of November 23, 2026, falling under NAICS code 811212.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

in about 1 month

Mechanical Actuator Replacement ComponentsThis subcontract involves the provision of replacement parts, seals, and internal components for prime contractors supporting NAVSUP Weapon Systems Support Philadelphia projects. The scope of work requires the manufacture or sourcing of components that strictly adhere to Chamilton Sustained Corporation drawing numbers and TDP Version No. 002 specifications. All delivered items must comply with the limits defined in the repair and overhaul manual and meet MIL-STD-130 marking requirements. The contract focuses on the delivery of individual replacement components or comprehensive kits designed for 45 actuators. Managed under the Department of the Navy, the performance of this contract is centered in Philadelphia, Pennsylvania, under NAICS code 332510.

Hardware Manufacturing

POSTED

DEADLINE

Mechanical Actuator Overhaul and RFI RestorationThis subcontract involves the full-cycle overhaul and repair of mechanical actuators for prime contractors supporting NAVSUP Weapon Systems Support Philadelphia projects. The scope of work includes the disassembly, cleaning, inspection, and rebuilding of units, with the replacement of any components that exceed repair manual limits. The final objective is the delivery of 45 actuators in Ready for Issue condition, with all work performed and tested according to approved manuals. To qualify, contractors must hold ISO 9001 or SAE AS9100 certification and ensure strict compliance with MIL-STD-130 and MIL-STD 2073 standards. The project is managed under the Department of the Navy and will be performed in Philadelphia. Interested parties must submit their responses by October 28, 2026.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

Supply of ECS Valve Replacement ComponentsThis subcontract through Navsup Weapon Systems Support for the Department of the Navy involves the supply of internal components, seals, gaskets, and hardware for ECS valve repair projects. The scope of work requires the manufacture or sourcing of specialized elastomers and aerospace-grade alloys that strictly adhere to OEM specifications for NSN 7RH 1660-01-668-6579 P8. Deliverables may be provided as individual replacement parts or comprehensive repair kits, and all shipments must include a Certificate of Conformance and Country of Origin certification. The project is categorized under NAICS code 332911 and will be performed in Philadelphia. Interested parties should note the posted date of October 23, 2026, with a response deadline set for November 23, 2026. This effort supports prime contractors in maintaining critical naval valve systems through the provision of high-specification hardware.

Industrial Valve Manufacturing

POSTED

DEADLINE

in about 1 month

Actuator Replacement Components SupplyThis subcontract for Actuator Replacement Components Supply supports Navsup Weapon Systems Support projects by providing the necessary replacement parts, seals, and internal components to return Actuator Assembly A to ready-for-issue condition. The selected provider is responsible for manufacturing or sourcing precision machined parts that strictly adhere to government or OEM specifications, delivering these items as either individual components or comprehensive repair kits. Performance of this contract takes place in Philadelphia and requires strict adherence to the Buy American and Balance of Payments Program. All supplied materials must be accompanied by proper dimension and material certifications to ensure quality and compliance. The opportunity was posted on October 23, 2026, with a response deadline of November 23, 2026, falling under NAICS code 332710 for the Department of the Navy.

POSTED

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS