Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Engine Blower Teardown and Repair Services

Active

Response Deadline11/23/2026, 09:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with the Department of the Navy's Navsup Weapon Systems Support involves the teardown, evaluation, repair, and modification of 10 Engine Blowers for aviation projects. The scope of work includes the complete disassembly of units, mechanical and electrical restoration, and rigorous testing to meet solicitation requirements. Technical specifications mandate the use of SAE-AS22759 series wire and MIL-STD-130 marking tools, and the contractor must maintain Government-approved source status for all flight-critical hardware. The project will be performed in Philadelphia, with the final deliverable consisting of 10 repaired blowers accompanied by their respective historical record files. Interested parties should note the response deadline of November 23, 2026, for this effort categorized under NAICS code 336412.

General Info

Agency

Department Of The Navy → Navsup Weapon Systems Support

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing

Place of Performance

PHILADELPHIA, PA, 19111-5098, USA

Set-Aside

NONE

Documents

This scope was carved out of N0038326QLB21.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BLOWER,ENGINE,EAPS — 2840015982504 — N0038326QLB21

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 23

subcontract

Response DeadlineNov 23

Submission deadline

Response Deadline

11/23/2026, 09:30:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → Navsup Weapon Systems Support

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of The Navy → Navsup Weapon Systems Support

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs teardown, evaluation, repair, and modification of 10 Engine Blowers (EAPS) for prime contractors on NAVSUP WSS aviation projects. Disassembles units, executes mechanical and electrical restoration, and performs testing per solicitation requirements. Uses SAE-AS22759 series wire and MIL-STD-130 marking tools. Requires Government-approved source status for flight-critical hardware. Delivers 10 repaired blowers with historical record files.

Similar Contracts

Same NAICS industry code

New Manufactured Material F110 AUGMENTOR NOZZLE SE

Solicitation # SPRTA1-27-R-0045

Solicitation SPRTA1-27-R-0045 is a firm fixed price, sole-source procurement issued by the Defense Logistics Agency Weapons Support (Richmond) for the acquisition of Augmentor Nozzle SE (Part Number 9538M95G05, NSN 2840-01-357-1941 PR) for the F110 engine. The requirement is sole-sourced to GE Aviation (CAGE Code 07482) for a quantity range of 76 to 453 units, with a base equivalent of 300 units. The requested delivery date is on or before December 31, 2027, with inspection and acceptance occurring at the origin. Shipping destinations include DLA Distribution Depot Oklahoma and the FY2303 DDOO SOP First Article location at Tinker AFB, Oklahoma. The contract mandates strict adherence to quality and security standards, including Higher Level Contract Quality and Critical Safety Items requirements under DFARS 252.209-7010. Contractors must comply with CMMC Level 2 (Self) requirements per DFARS 252.204-7021 and 252.204-7025. Packaging must follow MIL-STD-2073-1 and ISPM 15 for heat-treated wood materials, while marking must comply with MIL-STD-129 and MIL-STD-130 for Item Unique Identification (IUID) using a bag/tag method. Proposals are due by November 23, 2026, and should be directed to the contracting officer, Breann Irving.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

in about 1 month

VANE,COMPRESSOR,AIR — 2840017141634 — SPRPA127QXA24

Solicitation # SPRPA127QXA24

Solicitation SPRPA127QXA24, issued by the Department of the Navy via the DLA Aviation office in Philadelphia, seeks a single award for the procurement of 14 air compressor vanes under NSN 2840-01-714-1634 B8. The contract is established as FOB Destination, with delivery to DLA Distribution Cherry Point in North Carolina. Inspection and acceptance will occur at the origin. The government will evaluate offers based on a combination of price and past performance, with past performance weighted as the more important factor. Offerors must provide relevant performance history or explicitly state they have none to remain eligible for award. The contract includes stringent packaging and marking requirements, mandating compliance with MIL-STD-2073-1 for system stock and OCONUS shipments, and MIL-STD-129 for marking. Specific requirements for DLR labels and unique item identification per MIL-STD-130 are also enforced. Key regulatory clauses include the Buy American and Balance of Payments Program, safeguarding of covered defense information under DFARS 252.204-7012, and hazardous material identification. Payment and receiving reports must be processed electronically through the Wide Area Workflow system.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

BLOWER,ENGINE,EAPS — 2840015982504 — N0038326QLB21

Solicitation # N0038326QLB21

Solicitation NO0383-26-Q-LB21 is a request for quotations issued by NAVSUP Weapon Systems Support Philadelphia for the teardown, evaluation, repair, and modification of ten Engine Blowers, specifically NSN 7RH 2840-01-598-2504 V2. The government seeks a firm-fixed price contract to return these units to a Ready For Issue condition, with a required delivery period of 90 days. Award will be made to a single, technically acceptable offeror determined to be most advantageous, with past performance weighted as more important than price. The evaluation process will utilize the DoD Supplier Performance Risk System to assess item, price, and supplier risks. The contractor is responsible for providing all labor, facilities, materials, and tooling, as the government will not provide manufacturing aids. Key technical requirements include the mandatory use of SAE-AS22759 series wire instead of MIL-W-81381 and compliance with ISO 9001 or SAE AS9100 quality management systems. The contract establishes strict protocols for Beyond Economical Repair and Missing on Induction determinations, requiring written concurrence from DCMA. All work must be performed at the identified facility, with final inspection and acceptance occurring at the contractor's location. Packaging and marking must adhere to MIL-STD-2073-1 and MIL-STD-129 standards, and invoicing must be processed through the Wide Area Workflow system.

Navsup Weapon Systems Support

POSTED

DEADLINE

in about 1 month

Manufacturing of Straight Flange-to-Pipe Adapter (P/N 23059452)This subcontract involves the manufacture of high-precision Straight Flange-to-Pipe Adapters, specifically part number 23059452, for prime contractors supporting the Department of Defense DLA Weapons Support ASC Supplier OEM Division. The fabrication process must strictly adhere to Rolls-Royce specifications, with sampling conducted according to MIL-STD-1916 or ASQ H331 and marking performed per RQ017. The final deliverables consist of inspected, marked, and packaged components intended for critical applications. The contractor is required to maintain CMMC Level 2 certification and possess the necessary capabilities to handle Covered Defense Information. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 30, 2026, regarding this opportunity categorized under NAICS code 336412.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Engine Exhaust System ManufacturerThis subcontract involves the manufacture and supply of engine exhaust systems for prime contractors supporting DLA Weapons Support hardware contracts. The scope of work focuses on the fabrication of NSN 2990012683061, requiring the use of high-temperature alloys and industrial welding. Technical specifications demand precision drilling and machining of staggered holes through weld lines, maintaining strict diameter tolerances within +/-.015 inches. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Opns Engines agency, with performance taking place in New Cumberland. All deliverables must strictly comply with DLAD and DLA quality requirements. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026, falling under NAICS code 336412.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Manufacturing of Cable Chafing SleevesThis subcontract involves the manufacture and supply of specialized cable chafing sleeves for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating six 50-foot rolls of sleeves in strict accordance with source-control drawings. Performance will take place in Tracy, California, under NAICS code 336412. To qualify, the provider must hold US/Canada Joint Certification Program certification and maintain a quality management system compliant with SAE AS9003 or ISO 9001. Additionally, all sampling must adhere to MIL-STD-1916 or ASQ H1331 standards. The response deadline for this requirement is October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supplier of Transmission Shifter Gate Parts Kits (NSN 1730-01-564-6596)This subcontract involves the supply of 32 complete transmission shifter gate parts kits to prime contractors supporting Department of Defense supply contracts. The supplier is responsible for manufacturing or sourcing components in strict accordance with NSN 1730-01-564-6596 and the DLA Master List RA001. Key operational requirements include the use of precision machining equipment and the performance of quality control measures to ensure all non-accepted government identification is removed. The contract mandates full compliance with DFARS 252.225-7001 and falls under NAICS code 336412. Performance of the contract is centered at Robins Air Force Base. Interested parties must adhere to the established timeline, with the response deadline set for November 2, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Manufacturing of Diesel Intake Manifold AdaptersThis subcontract involves the manufacturing of precision-machined diesel intake manifold adapters for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support LSO Combat Vehicles and Armament. The scope of work includes fabrication, CNC machining, and quality testing of components under CLIN 0001, with performance taking place in Tracy, California. The contractor must adhere to strict regulatory standards, including MIL-STD-129 for marking and packaging and DFARS 252.223-7008 regarding the use of hexavalent chromium. Additionally, the provider is required to maintain cybersecurity compliance in accordance with NIST SP 800-171. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Manufacture of Valve Seats (NSN 4820011430395)This subcontract involves the precision machining and fabrication of 74 valve seats under NSN 4820011430395 for prime contractors supporting Department of Defense DLA supply contracts. The work must be performed according to P/N 5035L610-1 specifications for Critical Application Items, with physical identification adhering to MIL-STD-130 and the DLA Master List. Performance will take place at Hill AFB. The contractor is required to utilize CNC machining equipment and must maintain a CMMC Level 2 self-assessment to ensure the proper safeguarding of Controlled Unclassified Information. The final deliverable consists of 74 finished and inspected valve seats. The response deadline for this opportunity is November 2, 2026.

POSTED

DEADLINE

Manufacturing of Upper Air Baffle Assemblies (NSN 2805-01-136-7690)This subcontract involves the fabrication and assembly of 232 Upper Air Baffle Assemblies for the Department of Defense under the DLA Weapons Support Land Supplier Operations Engines. The work must be performed in accordance with TDP Rev B Gen 2 and specific technical drawings, including 19207 12285015, 12285016, 12285134, 12285133, and 12273934. The final deliverable consists of completed and inspected assemblies. Compliance requirements include mandatory US/Canada Joint Certification Program certification and the completion of DLA export-control training. The project is categorized under NAICS code 336412 and is designated for performance in Anniston, Alabama. Interested parties must adhere to the response deadline of November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Precision Manufacturing of Fuel Proportioner ShaftsThis subcontract involves the precision manufacturing of 12 Fuel Proportioner Shafts for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The scope of work requires the execution of CNC turning, grinding, and finishing to strict aerospace tolerances. As part of the quality assurance process, the contractor must produce three First Article Test units for government approval before completing the full order of 12 compliant shafts. Performance will take place at Tinker AFB. To be eligible, the contractor must hold SAE AS9003 or ISO 9001 certification and maintain CMMC Level 2 compliance. The project falls under NAICS code 336412, with a response deadline set for November 2, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Precision Machining of Aircraft Gas Turbine Mounting PlateThis subcontract involves the precision machining of one Component Mounting Plate for an aircraft gas turbine ring, specifically Rolls-Royce part number 23007075, for prime contractors supporting DLA Weapons Support ASC projects. The work requires the use of high-precision CNC centers and CMM verification to ensure the finished product meets strict technical specifications. The final deliverable is identified by NSN 2840013235646 and will be performed in New Cumberland. Quality assurance is a critical component of the contract, requiring adherence to ISO 9001:2015 inspection standards and sampling based on MIL-STD-1916 or ASQ H1331. Additionally, the contractor must complete a CMMC Level 2 self-assessment to meet cybersecurity requirements. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

More opportunities from Department Of The Navy → Navsup Weapon Systems Support

Same awarding agency

Supply of Replacement Parts for High Stage Precooler (P/N 3214446-4)This subcontract involves the supply of replacement materials and internal components for High Stage Precoolers, specifically part number 3214446-4, to support prime contractors on US Navy NAVSUP Weapon Systems Support projects. The selected provider must source parts that adhere strictly to OEM specifications or approved technical publications and provide Certificates of Conformance for all delivered items. Performance of the contract takes place in Philadelphia and requires strict adherence to MIL-STD-2073 packaging standards. Additionally, the provider must ensure full compliance with the Buy American and Balance of Payments Program certifications as mandated by DFARS. The solicitation was posted on October 23, 2026, with a response deadline of November 23, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Repair and Overhaul of High Stage Precooler (P/N 3214446-4)This subcontract involves the repair, overhaul, and upgrade of High Stage Precoolers (Part Number 3214446-4) to support prime contractors on US Navy NAVSUP Weapon Systems Support projects. The scope of work includes initial troubleshooting, the replacement of defective components, and the restoration of units to Ready for Issue condition in strict accordance with approved technical publications. The successful contractor is required to deliver five RFI precoolers accompanied by comprehensive test reports and process control documentation. Performance will take place in Philadelphia, and the contractor must maintain ISO-9001 or SAE AS9100 certification along with ANSI/NCSL Z540 calibration standards. This opportunity falls under NAICS code 811210 and is managed by the Department of the Navy. Interested parties must submit their responses by November 23, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

in about 1 month

High-Temperature Aviation Wiring Supply and InstallationThis subcontract for High-Temperature Aviation Wiring Supply and Installation involves the provision and installation of specialized aviation-grade wiring for engine blower units supporting prime contractors on NAVSUP Weapon Systems Support projects. The scope of work requires the removal of legacy MIL-W-81381 wire and the installation of SAE-AS22759 series wire, ensuring all soldering and assembly adhere to IPC/EIAJ-STD-001C standards. The final deliverables must be wired blower assemblies that meet all applicable SAE standards. The project is managed by the Department of the Navy and will be performed in Philadelphia. Contractors must ensure strict compliance with Buy American clauses and DFARS 252.204-7012 regulations. The solicitation was posted on October 23, 2026, with a response deadline of November 23, 2026.

Storage Battery Manufacturing

POSTED

DEADLINE

in about 1 month

Precision Parts Supply for Electromechanical ActuatorsThis subcontract, titled Precision Parts Supply for Electromechanical Actuators, involves the manufacture and supply of replacement parts, fasteners, and internal components for Electromechanical Actuators under NSN 2910-01-696-9261. Supporting prime contractors on US Navy and DLA projects, the provider must ensure all parts conform to TDP Version 001 and maintain an ISO/AS:9000 quality system. Deliverables include the certified replacement components along with comprehensive inspection reports covering dimensional, material, finish, and process certifications. Managed by the Navsup Weapon Systems Support within the Department of the Navy, the contract falls under NAICS code 334418. The place of performance is located in Philadelphia, Pennsylvania. Interested parties should note the posting date of October 23, 2026, with a response deadline of October 28, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Electromechanical Actuator Repair and Testing ServicesThis subcontract for Electromechanical Actuator Repair and Testing Services supports US Navy and DLA projects through the Department of the Navy's Navsup Weapon Systems Support. The scope of work involves the teardown, evaluation, repair, and modification of Electromechanical Actuators under NSN 2910-01-696-9261. The selected provider will disassemble units to assess wear, implement corrective actions according to TDP Version 001, and validate overall performance using specialized testing equipment. All work must be performed in compliance with Mil-I 45208A or ISO/AS:9000 standards, with final deliverables including the repaired actuators and detailed failure analysis reports. The place of performance is located in Philadelphia, Pennsylvania. This opportunity is categorized under NAICS code 335312 and was posted on October 23, 2026, with a response deadline of October 28, 2026.

Motor and Generator Manufacturing

POSTED

DEADLINE

Pulse Generator Component SupplyThis subcontract involves the supply of OEM or approved equivalent electronic parts, materials, and hardware necessary for the repair and upgrade of Pulse Generators, specifically part number 459659-2. Supporting prime contractors on projects for the Department of the Navy via NAVSUP Weapon Systems Support and NSWC Crane, the provider must ensure all components adhere to strict technical specifications and dimensional requirements. The scope of work includes providing material certifications and dimensional readings, with all items packaged according to MIL-STD-2073-1 and MIL-STD-129 standards. Performance for this contract is based in Philadelphia, Pennsylvania, under NAICS code 334418, with a response deadline set for November 23, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

in about 1 month

Pulse Generator Repair and Overhaul ServicesThis subcontract for Pulse Generator Repair and Overhaul Services supports NAVSUP Weapon Systems Support and NSWC Crane projects. The scope of work involves the teardown, evaluation, repair, overhaul, upgrade, and testing of Pulse Generators under NSN 6625014265. The contractor is responsible for disassembling units to identify failures, replacing faulty internal components, and conducting final acceptance testing to deliver ready-for-issue units along with detailed inspection reports. To qualify, the provider must maintain calibration systems that meet ANSI/NCSL Z540.03 or ISO-10012-1 standards and hold ISO 9001 or AS9100 certification. The performance of these services is located in Philadelphia, Pennsylvania. The solicitation was posted on October 23, 2026, with a response deadline of November 23, 2026, falling under NAICS code 811212.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

in about 1 month

Mechanical Actuator Replacement ComponentsThis subcontract involves the provision of replacement parts, seals, and internal components for prime contractors supporting NAVSUP Weapon Systems Support Philadelphia projects. The scope of work requires the manufacture or sourcing of components that strictly adhere to Chamilton Sustained Corporation drawing numbers and TDP Version No. 002 specifications. All delivered items must comply with the limits defined in the repair and overhaul manual and meet MIL-STD-130 marking requirements. The contract focuses on the delivery of individual replacement components or comprehensive kits designed for 45 actuators. Managed under the Department of the Navy, the performance of this contract is centered in Philadelphia, Pennsylvania, under NAICS code 332510.

Hardware Manufacturing

POSTED

DEADLINE

Mechanical Actuator Overhaul and RFI RestorationThis subcontract involves the full-cycle overhaul and repair of mechanical actuators for prime contractors supporting NAVSUP Weapon Systems Support Philadelphia projects. The scope of work includes the disassembly, cleaning, inspection, and rebuilding of units, with the replacement of any components that exceed repair manual limits. The final objective is the delivery of 45 actuators in Ready for Issue condition, with all work performed and tested according to approved manuals. To qualify, contractors must hold ISO 9001 or SAE AS9100 certification and ensure strict compliance with MIL-STD-130 and MIL-STD 2073 standards. The project is managed under the Department of the Navy and will be performed in Philadelphia. Interested parties must submit their responses by October 28, 2026.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

Supply of ECS Valve Replacement ComponentsThis subcontract through Navsup Weapon Systems Support for the Department of the Navy involves the supply of internal components, seals, gaskets, and hardware for ECS valve repair projects. The scope of work requires the manufacture or sourcing of specialized elastomers and aerospace-grade alloys that strictly adhere to OEM specifications for NSN 7RH 1660-01-668-6579 P8. Deliverables may be provided as individual replacement parts or comprehensive repair kits, and all shipments must include a Certificate of Conformance and Country of Origin certification. The project is categorized under NAICS code 332911 and will be performed in Philadelphia. Interested parties should note the posted date of October 23, 2026, with a response deadline set for November 23, 2026. This effort supports prime contractors in maintaining critical naval valve systems through the provision of high-specification hardware.

Industrial Valve Manufacturing

POSTED

DEADLINE

in about 1 month

ECS Valve Teardown, Evaluation, and RepairThis subcontract with the Department of the Navy, managed by Navsup Weapon Systems Support, involves the teardown, technical evaluation, and repair of an Environmental Control System valve, specifically NSN 7RH 1660-01-668-6579 P8. The selected contractor will perform repairs and modifications according to technical data using precision measurement tools and specialized pressure and flow testing rigs to deliver a fully repaired and certified component. The project is based in Philadelphia and requires strict adherence to AS9100 quality standards and Buy American compliance. Interested parties must submit their responses by November 23, 2026, under NAICS code 336414.

Guided Missile and Space Vehicle Manufacturing

POSTED

DEADLINE

in about 1 month

Actuator Replacement Components SupplyThis subcontract for Actuator Replacement Components Supply supports Navsup Weapon Systems Support projects by providing the necessary replacement parts, seals, and internal components to return Actuator Assembly A to ready-for-issue condition. The selected provider is responsible for manufacturing or sourcing precision machined parts that strictly adhere to government or OEM specifications, delivering these items as either individual components or comprehensive repair kits. Performance of this contract takes place in Philadelphia and requires strict adherence to the Buy American and Balance of Payments Program. All supplied materials must be accompanied by proper dimension and material certifications to ensure quality and compliance. The opportunity was posted on October 23, 2026, with a response deadline of November 23, 2026, falling under NAICS code 332710 for the Department of the Navy.

POSTED

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS