Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Electrical and Hydraulic System Diagnostics

Active

Federal

Response Deadline07/24/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the diagnostic evaluation and troubleshooting of electrical control systems and hydraulic power units specifically associated with wedge barrier installations. Work involves identifying and resolving faults in critical components such as wiring, solenoids, pumps, valves, and sensors to ensure proper functionality and operational readiness of the barrier systems. The scope requires technical expertise in both electrical and hydraulic subsystems, with a focus on precision troubleshooting and system restoration under stringent operational standards. This is a subcontract under a Total Small Business Set-Aside, classified under NAICS code 238210, indicating the work falls within the electrical and wiring installation category. The opportunity was posted on July 8, 2026, with responses due by July 24, 2026, at 7:00 PM. Performance is to occur in Houston, Texas, at a specified location with the zip code 77034. The contracting activity is under the Department of Defense through the W7N2 Uspfo Activity Txang 147, and all work must comply with federal procurement regulations governing small business set-asides.

General Info

Diagnostic troubleshooting of electrical and hydraulic systems for wedge barriers in Houston, Texas, under DoD small business set-aside.

Agency

Department Of Defense → W7N2 Uspfo Activity Txang 147View Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

Houston, TX, 77034, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 8

subcontract

Response DeadlineJul 24

Submission deadline

Response Deadline

07/24/2026, 07:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W7N2 Uspfo Activity Txang 147

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W7N2 Uspfo Activity Txang 147

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Troubleshoot electrical control systems and hydraulic power units for wedge barriers, identifying faults in wiring, solenoids, pumps, valves, and sensors.

Similar Contracts

Same NAICS industry code

Elevator Lobby 2 Way CommunicationsThe contract involves the installation of 23 new two-way communication boxes in elevator lobbies across the terminal, including 17 primary elevators, 3 service elevators, and 3 ramp landing elevators. The work is part of a broader effort to enhance emergency communication systems in airport elevator environments, ensuring compliance with safety and accessibility standards. The project is managed by the Aviation Project Management Group under the Port of Seattle, with primary point of contact Angela Peterson and Project Manager Christina Burdett available for inquiries. The solicitation was posted on July 22, 2026, and is classified under NAICS code 238210 for electrical contractors, indicating that qualified electrical or communications installation firms are expected to bid. The physical location of the work is at the Port of Seattle’s facility, though exact address details are not provided. The contract is currently in forecast status, indicating it is a planned future opportunity rather than an active solicitation, allowing potential vendors time to prepare submissions.

Aviation Project Management Group

POSTED

about 4 hours ago

DEADLINE

Variable Frequency Drives (VFD) Replacement Phase 3 (DBB)The contract entails the complete removal and replacement of 125 aging Robicon variable frequency drives with new, modern equipment to ensure reliable and efficient operation. The project requires the integration of these new VFDs into the Port’s Direct Digital Controller system to enable comprehensive monitoring of energy consumption, real-time output control readings, and system efficiency analytics. All necessary wiring, installation, testing, and commissioning activities must be completed to deliver a fully functional and seamlessly connected system. The work is part of Phase 3 of a multi-phase initiative under the Aviation Facilities & Infrastructure division of the Port of Seattle, with performance expected to occur within the Port’s operational facilities. Primary point of contact for inquiries is Yanet Maldonado, with Sharon Miick serving as the project manager, and all communications should be directed through their provided contact details.

Aviation Facilities & Infrastructure

POSTED

about 4 hours ago

DEADLINE

Operational Security Cameras Bagwell and North Cargo AreasThe contract entails the design, permitting, and construction of a new camera system to enhance security and operational oversight across the Bagwell and North Cargo Operations areas of the Port of Seattle. Approximately 50 high-resolution cameras will be installed at 43 distinct locations to replace and expand upon existing surveillance infrastructure, which currently focuses narrowly on conveyor systems and security doors. The upgrade aims to significantly improve forensic investigation capabilities and support enforcement of the Port’s movement rules and regulations by providing clearer, more comprehensive visual coverage of critical transit zones, including main drive lanes and entrances. In the Bagwell area, camera placement will be optimized to monitor vehicle flow and access points with greater precision, while in the North Cargo area, flexible pan-tilt-zoom units will be deployed to deliver dynamic, user-controllable surveillance across large surface areas, bridging gaps in current coverage. The project is managed by the Aviation Project Management Group under the Port of Seattle and is classified under NAICS code 238210 for special trade contractors. Point of contact for inquiries includes Angela Peterson as the Port Contact and Randa Williams as the Project Manager, with all work expected to be performed on-site at the Port facilities.

Aviation Project Management Group

POSTED

about 4 hours ago

DEADLINE

Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement (Re-bid)The Port of Seattle’s Aviation Project Management Group is soliciting bids to replace the existing aqueous film-forming foam (AFFF) fire suppression system at the Rental Car Facility located in SeaTac, which contains per- and polyfluoroalkyl substances (PFAS). The project requires complete removal of the contaminated foam system components and associated hazardous materials, followed by the design and installation of a new full dry chemical fire suppression system. This includes new storage tanks, valves, pumps, sprinkler lines, sprinkler heads, and reserve tanks, all of which must be integrated with the facility’s existing fire alarm system to ensure full operational compatibility and compliance with fire safety standards. The work is classified under NAICS code 238210 and is being pursued as a quick turnaround initiative to address environmental and regulatory concerns associated with PFAS contamination. The solicitation, titled Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement (Re-bid), was posted on July 22, 2026, and is being managed by the Port of Seattle. Primary point of contact is Todd Rehm, reachable at 206-787-5747 or rehm.t@portseattle.org, with Pat Nakamura serving as the project manager. All work must be performed on site at 3150 S 160th, SeaTac, and bidders are expected to demonstrate experience in hazardous material abatement, dry chemical system installation, and coordination with fire alarm systems. The project represents a critical infrastructure upgrade to ensure safety while eliminating environmentally harmful substances.

Aviation Project Management Group

POSTED

about 4 hours ago

DEADLINE

Parking Garage UPSThe contract involves the demo and replacement of the existing uninterruptible power supply system in a parking garage, ensuring continuous backup power for ticketing kiosks and associated access gates. The scope includes the installation of new UPS equipment, along with supporting components such as subpanels, electrical feeders, disconnects, and breakers, to modernize and enhance system reliability. The new UPS system will feature integrated data connections to enable remote alarm monitoring and real-time status reporting, improving operational oversight and maintenance responsiveness. The project is managed by the Aviation Project Management Group under the Port of Seattle, with primary point of contact Yanet Maldonado and project manager JJ Jordan available for inquiries. This forecasted solicitation, posted in July 2026, is classified under NAICS code 238210, indicating it falls within electrical contracting services. The work will be performed at the parking garage location managed by the Port, though specific address details are not provided. All equipment and installations must meet current electrical standards and support seamless integration with existing garage systems.

Aviation Project Management Group

POSTED

about 4 hours ago

DEADLINE

Electrical Unit Price Portwide 2026The contract outlines the scope of electrical work to be performed across multiple Port of Seattle facilities including Seattle-Tacoma International Airport, Maritime Properties, and surrounding areas. It encompasses the full range of electrical installations such as raceways, wiring, medium voltage cabling, boxes, transformers, electrical devices, temporary power and lighting systems, testing, and grounding, all executed in strict compliance with local and national code-enforcing regulations. The Contractor is responsible for providing all labor, tools, equipment, materials, and incidental resources required to complete the work, with tasks initiated and directed through official Work Authorizations issued by the Port of Seattle. All labor must be performed by personnel classified according to the Schedule of Unit Prices, ensuring standardized compensation and skill-level alignment. The contract is designated under NAICS code 238210 and is forecasted for performance beginning in 2026 under the title Electrical Unit Price Portwide 2026. Primary point of contact is Heather Bowden, with Lesley Miles serving as Project Manager, both reachable through official Port of Seattle channels. The work is not tied to a single location but spans the Port’s extensive operational footprint, requiring flexibility and coordination across various sites. No solicitation number has been issued yet, indicating this is a pre-solicitation forecast to prepare potential vendors for upcoming procurement.

Port Construction Services

POSTED

about 4 hours ago

DEADLINE

Electrical Conduit and Instrument Wiring

Philadelphia Gas Works

POSTED

about 10 hours ago

DEADLINE

American Embassy Tunis / INL - Secure Remote Court Installation and ConfigurationThe U.S. Embassy Tunis, under the Department of State, is soliciting offers for the installation and configuration of Cisco equipment to deploy a national Cisco Meeting Server (CMS) videoconferencing solution for remote court hearings on behalf of the Tunisian Ministry of Justice. The scope encompasses integration, commissioning, installation, configuration, testing, training, skills transfer, and three years of maintenance for a network spanning twelve courts, eighteen prisons, one Juvenile Rehabilitation Center, and the Ministry of Justice Data Center. Equipment includes 68 Samsung 65-inch TVs, 24 Cisco Webex Room Kit Plus units, 20 Cisco Webex Room Kits, 68 Legrand wall mounts, and one server for the data center, all to be delivered and installed under firm fixed-price terms with pricing required in Tunisian Dinars. VAT is excluded due to U.S. Embassy tax exemption. The contract mandates a project manager with fluent English and at least ten years of video experience, and requires compliance with technical specifications outlined in Attachment A, including IP addressing, Webex account configuration, virtual courtroom setup, QoS parameters, and Cisco license provisioning. Acceptance is contingent on provisional acceptance after installation and conclusive tests, followed by final acceptance after global validation and training, formalized through signed minutes. The performance standard allows no more than one customer complaint per month, with the Contracting Officer’s Representative responsible for documenting and forwarding complaints for corrective action. Proposals must be submitted electronically by July 20th, 2026 at 4:00 p.m. EDT, following an amendment that extended the original deadline from July 13th and added a mandatory site visit on July 15th, 2026. Offerors must be registered in SAM with a valid UEI number, submit a completed IRS Form W-14, and disclose any covered telecommunications equipment details per federal requirements. Proposals must include an SF-1449 with completed blocks, pricing in Section I, Section 5 Representations and Certifications, and additional technical information from Section 3, all in English and in MS-Word, Excel, or PDF format under 30MB per file. The award will go to the lowest-priced, acceptable, responsible offeror, with responsibility evaluated based on financial resources, past performance, organizational capability, necessary equipment, and ethical conduct. Payments will be made at the firm fixed price upon acceptance, invoiced to tunisvoucherexaminers@state.gov, following FAR

US Embassy Tunis

POSTED

about 10 hours ago

DEADLINE

MOF Cranberry Mt. Nature Center Generator Replacement

Monongahela National Forest

POSTED

about 10 hours ago

DEADLINE

FACZG CAC Vehicle Inspection Lights Installation

US Embassy Zagreb

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Electrical Control System Installation

Lexington / Richland County School District Five

POSTED

about 18 hours ago

DEADLINE

Installation and Decommissioning Services of Fencing and Electrical Service for the TAME Project for Air Quality Monitoring SitesThe contract involves the installation and decommissioning of fencing and electrical services for five air quality monitoring sites under the TAME Project in Virginia, specifically targeting the Newport News and Norfolk areas. The work requires comprehensive site preparation, secure fencing installation to protect sensitive monitoring equipment, and reliable electrical service setup including power connections and safety measures, with subsequent decommissioning procedures to ensure proper removal and site restoration. All activities must adhere to environmental and safety standards as mandated by the Virginia Department of Environmental Quality, which is issuing this solicitation under IFB-124737. Proposals are due by August 17, 2026, and the opportunity is open to state, local, and educational government entities under the SLED classification. Interested parties must respond through the official vendor portal linked in the solicitation, with all questions or inquiries directed to Rebecca M. Taylor at the provided email and phone number. The contract does not specify a set-aside type or NAICS code, leaving the eligibility criteria open to qualified contractors meeting the technical and operational requirements for air monitoring infrastructure support.

Department of Environmental Quality

POSTED

DEADLINE

More opportunities from Department Of Defense → W7N2 Uspfo Activity Txang 147

Same awarding agency

AVB Barrier AssessmentThe U.S. Air Force’s 147 Attack Wing Base Contracting Office is seeking qualified small businesses to provide AVB barrier assessment services under a firm-fixed-price contract, solicited as a 100% small business set-aside under NAICS code 561621 with a size standard of $25 million in annual receipts. This combined synopsis and solicitation, issued under FAR Subpart 12.6 and aligned with Federal Acquisition Circular 2026-01 and DFARS provisions current through October 2025, does not include a separate written solicitation and relies entirely on the information provided in this notice and its attachments. Quotes must be submitted to the designated contracting officer, MSgt Buddy Ciemiengo, at buddy.ciemiengo.1@us.af.mil, and are due by 7:00 p.m. Eastern Time on July 24, 2026, with the solicitation number W50S77-26-Q-0012. The work is to be performed in Houston, Texas, and all interested parties are directed to review the attached documents for full requirements and terms governing the procurement.

Security Systems Services (except Locksmiths)

POSTED

about 10 hours ago

DEADLINE

FY26 Installation of New 3-Phase Primary Underground Electrical Service Ellington Field, TXThe contract solicitation W50S77-26-Q-A001 is a combined synopsis and solicitation issued by the United States Property & Fiscal Office - Texas Air National Guard for the replacement of a failed underground primary electrical service between the existing tap box and transformer supplying power to the mobile shooting range at Ellington Field Joint Reserve Base in Houston, Texas. The project, identified as FWJH262710, is a Firm Fixed Price purchase order solicited under the Revolutionary FAR Overhaul (RFO) Part 12, with a total small business set-aside for NAICS code 238210, which carries a size standard of $45 million. The work scope requires the contractor to furnish all labor, materials, equipment, transportation, and supervision necessary to restore full operational electrical capability to the mobile shooting range, in strict compliance with UFC, UFGS, NFPA, OSHA, and other industry and military standards. The contract emphasizes full compliance with security protocols including HSPD-12 and FIPS PUB 201 identification requirements, mandatory U.S. citizenship or legal residency, and the use of government-issued photo ID for base access. Contractors must also wear orange or lime safety vests and adhere to traffic control and safety regulations specified by federal guidelines. The deadline for responses has been extended via amendments to July 24, 2026, with quotes required to be submitted electronically via email to designated government points of contact; submissions via fax, mail, or hand delivery are prohibited. All quotes must be in PDF format, contain no hyperlinks or classified information, and include proper acknowledgment of any issued amendments. The government will evaluate offers based solely on price and price-related factors, with award going to the responsible vendor whose submission conforms to the solicitation. Responsibility is a pass/fail gate under FAR 9.104, and offerors must maintain current SAM registration with accurate small business certifications. Performance must commence within 10 days of notice to proceed and be completed within 60 days, with final acceptance contingent upon submission of test results, quality control plan approval, and a signed release of claims. Payment will be processed through Wide Area WorkFlow using specific document types, and a payment bond may be required if later advised by amendment. All contractual obligations, including limitations on subcontracting (85% cap on payments to non-similarly situated entities) and compliance with security, safety, and administrative procedures, are governed by the

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Subcontractor Management and ReportingThe contract requires support to the prime contractor in managing and reporting first-tier subcontract awards in compliance with FAR 52.204-10, ensuring accurate and timely documentation of subcontracting activities. The primary goal is to facilitated the inclusion of small business subcontractors by creating meaningful opportunities for their participation in the contract performance, aligning with federal objectives for small business contracting. All subcontract award data must be accurately tracked, reported, and maintained to meet federal regulatory requirements and promote transparency in the supply chain. This is a total small business set-aside under SBA guidelines, meaning only small businesses are eligible to compete, with the NAICS code 541611 indicating the work involves management consulting services. The opportunity is issued by the Department of Defense through the W7N2 Uspfo Activity Txang 147 office, with performance anticipated to occur in Houston, Texas, specific to the zip code 77034. Proposals must be submitted by the deadline of July 24, 2026, and the solicitation was posted on July 8, 2026, giving interested parties approximately sixteen days to prepare and respond. The focus remains on enforcing subcontracting compliance while expanding engagement with small businesses across the contractor ecosystem.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Controlled Unclassified Information (CUI) Protection and CybersecurityThis contract requires the implementation of comprehensive cybersecurity controls to safeguard Controlled Unclassified Information in alignment with NIST Special Publication 800-171, ensuring all applicable standards for protecting sensitive data are fully met. The contractor must also establish and maintain processes to detect, report, and respond to cyber incidents in accordance with Defense Federal Acquisition Regulation Supplement requirements, with timely and accurate incident reporting being a critical obligation. The work is performed in Houston, Texas, under a Total Small Business Set-Aside, exclusively reserved for small businesses as defined by the SBA, and the North American Industry Classification System code 541512 applies, indicating the scope focuses on computer systems design services. The solicitation was posted on July 8, 2026, with a firm response deadline of July 24, 2026, and is structured as a subcontract under the Department of Defense’s W7N2 Uspfo Activity Txang 147.

Computer Systems Design Services

POSTED

DEADLINE

Site Safety and Environmental Compliance ManagementThe contract titled Site Safety and Environmental Compliance Management is a small business set-aside subcontract under the NAICS code 541620, issued by the Department of Defense through the W7N2 Uspfo Activity Txang 147. It requires the contractor to develop and implement a site-specific safety plan tailored to the location in Houston, Texas, with a zip code of 77034, and to ensure full adherence to all applicable environmental regulations. A critical obligation includes the immediate mandatory reporting of any spills or incidents that occur during testing activities, emphasizing accountability and prompt response to environmental threats. The solicitation was posted on July 8, 2026, with a response deadline of July 24, 2026, and is restricted exclusively to small businesses as defined by the SBA’s Total Small Business Set-Aside guidelines, ensuring opportunities for qualified small firms to participate in federal environmental and safety compliance efforts.

Environmental Consulting Services

POSTED

DEADLINE

Corrosion and Rust Damage InspectionThe contract requires the performance of visual and tactile inspections on wedge barrier components to assess the extent of corrosion and rust damage and determine its effect on operational functionality. The work is focused on evaluating the structural integrity and performance capabilities of these components under real-world exposure conditions to ensure continued reliability and safety. The inspection process must be thorough and detail-oriented, identifying both surface degradation and underlying structural compromise that may not be immediately visible. This is a total small business set-aside under the SBA program, with a NAICS code of 541330 indicating it pertains to engineering services. The opportunity is issued by the Department of Defense through the W7N2 Uspfo Activity Txang 147, with performance required in Houston, Texas, at the 77034 zip code. The solicitation was posted on July 8, 2026, and responses are due by July 24, 2026, at 7:00 PM Eastern Time. Only small businesses qualify to respond, and the contract is structured as a subcontract under federal procurement guidelines.

Engineering Services

POSTED

DEADLINE

Wedge Barrier Functional Testing and Deployment AssessmentThe contract requires full-cycle functional testing of six wedge barriers, encompassing deployment, a 60-second hold period, retraction, and return to an inert state, with the goal of identifying any mechanical limitations and documenting performance issues observed during each phase. Testing must be conducted under conditions that simulate operational use to ensure accuracy and reliability of the results, and all findings must be thoroughly recorded for review and analysis. The work is scoped to evaluate the mechanical integrity and functional consistency of the barriers under repeated operational cycles. This is a small business set-aside subcontract under NAICS code 811310, issued by the Department of Defense through the W7N2 Uspfo Activity Txang 147, with performance required in Houston, Texas, ZIP 77034. The solicitation was posted on July 8, 2026, and responses are due by July 24, 2026, at 7:00 PM. Only small business entities are eligible to respond, and the contract falls under the Total Small Business Set-Aside provisions as defined by FAR 19.5. There is no designated point of contact listed, and interested parties must access the full solicitation details via the provided SAM.gov link.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE