This Government Contract opportunity from Department Of Defense was posted on July 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Electrical Contact Brush Manufacturing and Supply

Closed

Federal

Submission Closed08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7L7-26-T-5054

This contract is for the procurement of nine power supply units, identified by NSN 6130-01-688-7407 and part number PS1504H-MB-9630 from Powerstar Inc. The items are classified as critical application commercial items and must be delivered to DLA Distribution Cherry Point in North Carolina. The required delivery date is February 27, 2027, with a delivery window of 153 days. The agreement mandates strict adherence to several technical and quality standards, including CMMC Level 2 self-assessment for cybersecurity and specific DLA packaging requirements. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in certain sample lots. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals and requires compliance with hazardous communication standards and bare item marking protocols.

CHERRY POINT PHANTOM RD BLDG

POSTED

DEADLINE

TAPE, INSULATION, ELECTR

Solicitation # SPE4A6-26-T-28QB

Solicitation SPE4A6-26-T-28QB is a Request for Quotations issued by the DLA Aviation ASC Commodities Division for the procurement of electrical insulation tape, identified as NSN 5970009445015. This commercial item is designated as a critical application item with a non-extendable shelf life of 18 months. The requirement is for a quantity of 4.000 rolls, with a delivery lead time of 20 days and a delivery destination in Okinawa, Japan. Quotations must be submitted via the DLA Internet Bid Board System by September 18, 2026. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-129 for marking and RP001 for palletization. Inspection and acceptance will occur at the destination per FAR 52.246-2, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Compliance with the Buy American Act, Berry Amendment, and DFARS cybersecurity requirements, specifically regarding the safeguarding of covered defense information, is required. Invoicing and payment processing must be conducted through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7L7-26-T-4788

Solicitation SPE7L7-26-T-4788 is a federal procurement issued by DLA Distribution San Joaquin for the acquisition of three power supply units, identified as NSN 6130-01-706-9298 and Parker Hannifin Corporation part number 90012510. The contract is established as a fixed-price supply agreement with delivery required within 127 days after receipt of order, featuring a need ship date of April 7, 2026, and a final required delivery date of July 25, 2026. Shipping is designated as FOB Origin, with the destination and point of acceptance located at the DLA Distribution San Joaquin facility in Tracy, California. The procurement is subject to rigorous quality and packaging standards, requiring compliance with ASTM D3951, MIL-STD-129 for marking and labeling, and RP001 for palletization. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Administrative requirements include electronic invoicing via Wide Area WorkFlow (WAWF) and adherence to various FAR and DFARS clauses, including those regarding the safeguarding of covered defense information and prohibitions on certain telecommunications equipment. Proposals must be submitted through the DIBBS portal by August 27, 2026.

POSTED

DEADLINE

TAPE, INSULATION, ELECTR

Solicitation # SPE4A6-26-T-27CU

Solicitation SPE4A6-26-T-27CU is a Request for Quotations issued by the DLA Aviation ASC Commodities Division for the procurement of electrical insulation tape, identified by NSN 5970-00-480-1329. The requirement consists of multiple line items with quantities ranging from 1 to 20 rolls, with required delivery dates scheduled between August 28 and September 8, 2026. Delivery is required within five days of the award, with FOB, inspection, and acceptance all set at the destination. Shipments are directed to various locations, including the USS Shoup DDG 86, the DLA LMP Zone 1 depot in Texas, the Lockheed Martin Distribution Center in Georgia, ASD Oceana in Virginia, and the Base Naval de Rota in Spain. The contractor must adhere to strict quality and packaging standards, including sealing each tape in a waterproof polyfilm bag and packing 10 to 12 rolls per intermediate container. All marking must comply with MIL-STD-129, specifically using Special Marking Code 32 for Type I shelf-life items, which have a non-extendable shelf life of 18 months. The use of mercury or mercury compounds is strictly prohibited in all preservation, packaging, and marking. Technical and quality requirements are further governed by the DLA Master List and RP001 packaging requirements. Evaluation for award will consider price, with a preference for certified HUBZone Small Business Concerns. Offers utilizing additive manufacturing processes are ineligible for award. The procurement is subject to the Buy American Act and the Berry Amendment, requiring disclosure of any non-domestic materials. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS cybersecurity standards for safeguarding covered defense information.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

POWER SUPPLY, UNINTERRU

Solicitation # SPE7L7-26-Q-2372

Solicitation SPE7L7-26-Q-2372 is a fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for two uninterruptible power supplies, identified by NSN 6130-01-673-0176 and Motorola Solutions part number DSGXT4-1000RT120. The items are designated as critical application items with a 12-month extendable shelf life. Delivery is required within 60 days after order to the USS MARINETTE (LCS 25). Award will be based on the best value to the government, evaluating price, offered delivery, and past performance. The contract mandates strict adherence to military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Because the items involve sealed lead acid batteries, the contractor must provide Material Safety Data Sheets per FED-STD-313 and comply with hazardous material shipping regulations under IP025. Quality assurance requires sampling according to MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in the sample lot. Additionally, the contractor must complete a CMMC Level 2 self-assessment and utilize the Wide Area WorkFlow system for all invoicing and receiving reports. Inspection and acceptance will occur at the point of origin.

Defense Logistics Agency

POSTED

DEADLINE

INSULATION SLEEVING, EL

Solicitation # SPE4A6-26-T-26RA

This contract is for the procurement of 820 feet of electrical insulation sleeving, identified by NSN 5970-00-935-0083 and part number M23053/8-002-C. The item is classified as a critical application commercial item and must adhere to SAE AMS-DTL-23053/8A standards. It carries a 60-month extendable shelf life and must be supplied on a spool or reel. The contract prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required by specific systems. Delivery is required within 171 days, with a need date of March 2, 2027, shipping FOB Origin to DLA Distribution Warner Robins. Quality assurance follows a zero-based sampling plan per MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Packaging and marking must comply with MIL-STD-129 and RP001 requirements, and the contract allows for a quantity variance of plus or minus 10 percent.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Flash Sound Devices

POSTED

DEADLINE

Supplier of Electrical Contacts (NSN 5999-01-132-8787)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Manufacturing of Special Purpose Branched Cable Assemblies

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Battery Box Manufacturer/Supplier

RED RIVER RECEIVING BLDG

POSTED

DEADLINE

Supply of Circuit Breaker Trippers (NSN 5925-01-481-5874)

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Supplier of Electromagnetic Relays (NSN 5945-01-136-7909)

MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 13 days

AI Contract Overview

The contract entails the production and delivery of electrical contact brushes compliant with military specifications, covering all aspects of manufacturing, quality assurance, and logistical support. The supplier is responsible for ensuring the brushes meet rigorous performance and durability standards, including comprehensive testing, proper packaging, and complete documentation for each lot delivered. Shipments are to be made FOB origin to locations within the contiguous United States, with delivery governed by individual IDIQ orders issued under the master agreement. All work must align with the applicable military and industry benchmarks to ensure compatibility and reliability in defense applications. The solicitation is issued under the Department of Defense through the ASC Commodities Division and falls under NAICS code 335999 for other electrical equipment and component manufacturing. The opportunity is structured as a subcontract and is open for responses through August 10, 2026, with proposals due by 5:00 PM Eastern Time. While no set-aside designation is specified, interested parties must have the technical and production capabilities to fulfill military-grade requirements and manage end-to-end delivery. The contract does not define a specific place of performance beyond the FOB origin condition, and the point of contact information is not provided, requiring bidders to consult the official DIBBS portal for further details and submission instructions.

General Info

Produce and deliver military-standard electrical contact brushes FOB origin under IDIQ orders through August 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-R-XB92.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BRUSH, ELECTRICAL CONTACT

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJul 28

subcontract

Response DeadlineAug 10

Deadline has passed

Submission Closed

08/10/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Production and delivery of electrical contact brushes meeting military specifications, including packaging, testing, documentation, and FOB origin shipping to CONUS locations under IDIQ delivery orders.