Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Electrical Engine Starter Manufacturing and Supply

Active

Federal

Response Deadline08/04/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the manufacture and supply of electrical engine starters identified by NSN 2920015365569, with strict adherence to military specifications covering performance, quality, and reliability standards. All units must conform to defined packaging and labeling protocols to ensure compatibility with Department of Defense logistics systems and handling procedures. Delivery is required FOB Origin, meaning the contractor assumes responsibility for all costs and risks until the product leaves their facility, after which ownership and liability transfer to the Defense Logistics Agency. The procurement is structured as a subcontract under a Total Small Business Set-Aside, designated under FAR 19.5, and falls under the NAICS code 336320 for Automotive Electrical and Electronic Equipment Manufacturing, ensuring eligibility solely for small businesses. The solicitation was posted on July 20, 2026, with a firm deadline for responses set for August 4, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. All work must align with DLA's procedural and compliance requirements, and the full details are accessible via the provided DIBBS link.

General Info

Small business subcontract to supply military-spec electrical starters, FOB Origin, by August 4, 2026.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

336320 - Motor Vehicle Electrical and Electronic Equipment ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Response DeadlineAug 4

Submission deadline

Response Deadline

08/04/2026, 05:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and supply of electrical engine starters (NSN: 2920015365569) compliant with military specifications, packaging, labeling, and FOB Origin delivery requirements for DLA.

Similar Contracts

Same NAICS industry code

PANEL, INDICATING, LIGHTThe contract specifies the procurement of five units of a light-transmitting indicating panel, identified by NSN 6220-01-509-3310 and part number 74J808070-823, with delivery required within 171 days to the DLA Distribution facility in New Cumberland, Pennsylvania. The item must conform to rigorous technical and quality standards referenced through the DLA Master List of Technical and Quality Requirements, with verification levels and sampling methods strictly defined per MIL-STD-1916 or comparable zero-based sampling plans; critical, major, and minor attributes must be verified at levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. Manufacturing and packaging adherence is mandated under DLA Packaging Requirements and MIL-STD-2073-1E, with packaging coded as U, using E5 unit containers and no cushioning material. All items must be marked per MIL-STD-129 with the special fragile code 01-01, and palletization must comply with DLA guidelines. The supplier must maintain Cybersecurity Maturity Model Certification Level 2 self-assessment compliance and remove government identification from non-accepted supplies. The delivery is FOB origin with no variance allowed in quantity, inspection and acceptance occur at destination, and the contract requires adherence to specific transportation protocols per DLAD Proc Notes C19 and C20. The original required delivery date is December 18, 2027, with a need ship date of January 17, 2027, under solicitation SPE4A6-26-T-08CN, issued by the Department of Defense’s ASC Commodities Division.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

LIGHT ASSEMBLY, INDICATThe contract pertains to the procurement of a Light Assembly, Indicator, identified by NSN 6220-01-502-7218 and part number 22506-001 from Korry Electronics Co, with a required quantity of three units. Delivery is due in 171 days, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129, including a special fragile marking code. Unit of issue is each, with a fixed unit price and no quantity variance permitted. Packaging and palletization follow DLA’s standardized requirements, and the item is not classified as hazardous, exempting it from SDS documentation. The item is designated as a Critical Application Item, and the technical data referenced, though incomplete, must still be fully met. Sampling and quality verification follow MIL-STD-1916 or a comparable zero-based plan, with undefined attributes treated as major and acceptance requiring zero non-conformances. The item is not required to have Unique Identification under DFARS 252.211-7003(c)(1)(i). Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with a need ship date of January 17, 2027, and an original required delivery date of April 16, 2027. The solicitation, issued under SPE4A6-26-T-08DV, references DLA’s master list of technical and quality requirements and is governed by applicable revisions effective on the solicitation or award date, depending on acquisition type.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

ARMATURE, IGNITIONThe contract pertains to the procurement of one ignition armature and reluctor sleeve, specified for use on a Chrysler Model M880 truck cargo vehicle with a 1-1/4 ton capacity, identified by NSN 2920-01-003-5473 and purchase request 7017552671. The item must be delivered within five days of contract award, with delivery terms set at FOB origin and zero tolerance for quantity variance. Inspection and acceptance occur at the destination location, and packaging must comply with ASTM D3951 while adhering strictly to all DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. All packaging and labeling must follow MIL-STD-129, and the unit of issue is a single unit. The shipment is directed to the U.S. Army at Building 8410, Edwards Road, Fort Riley, Kansas, under a RDD/NCMS shipment classification with transport guidelines specified in DLAD PROC NOTES C19 and C20. The contract is administered under solicitation SPE7L1-26-T-856W, with a required delivery date of July 20, 2026, and is subject to all technical and quality specifications referenced through the DLA Master List, including applicable revision control criteria based on acquisition size and amendment timelines. The point of contact for inquiries is Kristina Derry with the Department of Defense’s Land Supply Chain.

LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

POST ASSEMBLY, SUPPO

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

LIGHT ASSEMBLY, INDIThis contract pertains to the procurement of a Light Assembly, Indicator with NSN 6220-01-436-3703, requiring delivery within 171 days after order placement. The item is subject to stringent cybersecurity and export control requirements, including compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 as a certified third-party assessment organization, physical identification and bare item marking standards, and DLA packaging guidelines. Technical data associated with this item is controlled under either ITAR or EAR, prohibiting any export, including disclosure to foreign nationals within the United States, without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and only contractors with an approved US/Canada Joint Certification Program certification, completion of mandatory DLA export control training, and formal approval by DLA may access the information. The solicitation number is SPE4A6-26-T-08PA, issued by the ASC Commodities Division under the Department of Defense with a response deadline of July 29, 2026, and the place of performance is set at Cherry Point, North Carolina, with Jessica Fuentes-OSSIO as the primary point of contact.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

62--LIGHT ASSEMBLY,INDICAT

POSTED

about 19 hours ago

DEADLINE

Supply of Marine Navigational LightsThe contract entails the procurement and delivery of 781 marine navigational lights to meet stringent military standards for packaging, labeling, and shipment. Each unit must be traceable to its verified batch, ensuring full accountability and compliance with defense specifications. The contractor is responsible for end-to-end quality control, from manufacturing to final delivery, with emphasis on adherence to military-grade requirements for reliability and durability in operational environments. The contract is classified as a subcontract under the NAICS code 336320, issued by the Defense Logistics Agency within the Department of Defense. The award is linked to the contract number SPE4A626D5720 and was posted on July 20, 2026. While specific performance locations and point of contact details are not provided, the delivery and compliance obligations are defined by federal military standards, requiring the contractor to maintain detailed documentation and certification for every batch shipped to fulfill contractual obligations.

Defense Logistics Agency

POSTED

DEADLINE

Aerospace Lighting Component Supply – Aircraft Landing LightsThe contract requires the supply of 28 units of commercial-off-the-shelf aircraft landing lights designated by NSN 6220013061640 and part number 50-0178-5, all of which must adhere to the DLA Master List and meet military packaging standards to ensure compatibility and durability in operational environments. The items are intended for use by the Department of Defense and will be delivered to Hill Air Force Base, Utah, with the specified zip code 84056-5734 as the place of performance. The procurement falls under NAICS code 336320, classifying it within the aircraft manufacturing sector, and is structured as a subcontract under the ASC SUPPLIER OPER OEM DIVISION. All bids must be submitted by the response deadline of July 28, 2026, at 17:00 UTC, with the solicitation posted on July 20, 2026. The contract does not specify any set-aside provisions, indicating it is open to general competition. The procurement is hosted on the DIBBS platform, and interested parties must access the official solicitation link provided to review detailed requirements and submit responses. Compliance with military specifications, timely delivery, and adherence to packaging protocols are critical to meeting contract obligations.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Manufacture of Navigational Aircraft Lighting ComponentsThe contract requires the full manufacturing, testing, and delivery of 24 units of a navigational aircraft light component identified by NSN 6220-01-443-3026, with strict adherence to military specifications governing labeling, packaging, and hazardous materials handling. All work must be completed in compliance with defense standards to ensure operational reliability and regulatory conformity. The component is critical for aircraft navigation systems and must meet exacting quality and performance criteria prior to acceptance. The contract is a subcontract issued by the ASC Commodities Division under the Department of Defense, with performance required at Hill AFB, Utah, zip code 84056-5734. The NAICS code 336320 indicates classification within aerospace manufacturing. The solicitation was posted on July 20, 2026, with responses due by July 23, 2026, indicating a rapid procurement timeline. All submissions must align with the requirements detailed in the official DIBBS portal listing, and contractors are expected to handle all logistics, including hazardous material compliance and final delivery, without additional support.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

LIGHT, LANDING, AIRCRThis contract pertains to the procurement of a commercial item identified as a Light Landing Aircraft component, with part number 50-0178-5 and NSN 6220013061640, for a quantity of 28 units. The item is subject to stringent technical and quality requirements referenced from the DLA Master List, and compliance with MIL-STD-2073-1E packaging standards is mandatory, including specific preservation methods, packaging materials, and marking per MIL-STD-129 with a special fragile designation. Unit identification is not required per customer request, and the item is classified as a critical application item, requiring full adherence to all performance and quality specifications. The supplier must meet CMMC Level 2 cybersecurity standards and provide documentation for source approval, with all inspections and acceptance occurring at the destination. Delivery is required FOB origin, with a strict delivery window of 546 days from contract award, and the shipment must be routed to DLA Distribution Depot Hill in Hill AFB, Utah, via the designated freight address. The contract enforces zero tolerance for non-conformances under sampling plans derived from MIL-STD-1916 or equivalent zero-based methods, with critical, major, and minor attributes assigned strict verification levels or AQLs. No variance in quantity is permitted, and all packaging must conform to DLA’s procurement packaging requirements, including palletization and unit container specifications. The purchase request number is 7016880861, and the point of contact for inquiries is Jessica Baake, with the solicitation issued on July 20, 2026, and responses due by July 28, 2026, under NAICS code 336320 for aerospace product and parts manufacturing.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

STRAINER ELEMENT, SEDIMThe contract is for the procurement of 131 Strainer Elements, Sediment, identified by NSN 4730-01-320-7111, under solicitation SPE7M3-26-T-7568, issued by the Defense Logistics Agency’s Fluid Handling Division. The request is a total small business set-aside under NAICS code 336320, with proposals due by July 31, 2026, and delivery required at the DLA Distribution facility in New Cumberland, Pennsylvania, within 213 days after the solicitation issue date. The contract is expected to be awarded on a firm-fixed-price basis, with an estimated total value of $124,004.60 based on a unit price of $946.60. The item is subject to export control under ITAR or EAR, requiring compliance with DFARS 252.225-7048, and access to associated technical data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DLA export control training, and formal authorization from DLA. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, including GS1-128 barcoding, with preservation method code 10 for dry storage. Inspection and acceptance occur at the destination point by the Government, with compliance required to MIL-T-31000, MIL-S-901, and DI-ENVR-80706. The contractor must submit Safety Data Sheets and hazard labels conforming to 29 CFR 1910.1200, and is prohibited from using hexavalent chromium or storing hazardous materials without approval. Invoicing must be submitted electronically through WAWF, and all offerors must be registered in SAM.gov. The solicitation includes numerous DFARS clauses addressing cybersecurity, trafficking in persons, employment eligibility, whistleblower rights, and the prohibition of certain defense telecommunications equipment. No formal evaluation factors, weights, or award basis are specified beyond the small business set-aside, and no attachments are formally listed. Additional requirements include compliance with the Supplier Performance Risk System and restrictions on mandatory arbitration agreements, with no security clearance, key personnel, or option provisions specified.

FLUID HANDLING DIVISION

POSTED

DEADLINE

STARTER, ENGINE, ELECThe contract, identified as SPE7LX-26-U-8879, is a solicitation issued by the Department of Defense’s Strategic Acquisition Program Directorate for the procurement of 76 electrical engine starters, identified by NSN 2920-01-536-5569, under a Total Small Business Set-Aside as defined by FAR 19.5. The contract is structured as an Indefinite Delivery Contract (IDC), allowing for multiple delivery orders with a guaranteed minimum of 11 units and a maximum contract value of $350,000.00. Delivery is required within 69 days of order placement under FOB Origin terms, with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951, but all requirements from the DLA Master List of Technical and Quality Requirements supersede this standard, and all items must be marked and labeled per MIL-STD-129, including proper barcoding and hazardous material identification per 29 CFR 1910.1200. Palletization must conform to RP001: DLA Packaging Requirements for Procurement, with the Unit of Issue and Quantity per Unit Pack as specified in the contract. The solicitation mandates strict adherence to numerous Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses, including those on employment equity, combating trafficking in persons, employment eligibility verification, sustainable products, hazardous materials handling, whistleblower protections, information disclosure, cybersecurity compliance per NIST SP 800-171, and subcontracting for commercial items. Contractors must hold a valid Unique Entity ID (UEI) and CAGE code and represent their small business status accurately under applicable socioeconomic categories. Payment must be processed exclusively through the Wide Area WorkFlow (WAWF) system, and proposals must be submitted electronically via the DLA Internet Bid Board System (DIBBS) by the deadline of August 4, 2026. The Contracting Officer retains discretion over the award basis, and no evaluation factors or scoring criteria are explicitly outlined, suggesting a potentially LPTA or trade-off approach. All supplies must be free of government identification if not accepted, and compliance with all technical, quality, and logistical requirements is mandatory for acceptance.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

CLAMP, LOOPThis contract, identified by solicitation number SPE7LX-26-U-8911, is a Total Small Business Set-Aside for the procurement of CLAMP, LOOP with NSN 5340-01-611-4025 and part numbers 90531K and VT10592AA01-3HN from CUMMINS FILTRATION INC. and NORMA PENNSYLVANIA INC. DIV BREEZE respectively. The requirement, for 240 units at a unit price of $1 each, is designated as a DLA DIRECT, CONUS delivery with FOB ORIGIN terms and no quantity variance allowed. Delivery must be completed within 116 days, with inspection and acceptance occurring at the destination. Packaging must strictly comply with the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. If the item is classified as hazardous under FED-STD-313, packaging must follow TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is permitted, but all packaging and labeling must conform to MIL-STD-129. Palletization must adhere to RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT. The contract is part of a broader framework incorporating technical and quality specifications referenced through R and I numbers found on the DLA website. The solicitation, issued by the Department of Defense’s Strategic Acquisition Program Directorate, is closed to small businesses only and was posted on July 21, 2026, with responses due by August 5, 2026. The unit of issue is each (EA), and quantities are fixed with no allowance for adjustment. The point of contact for inquiries is Theodore Misiolek, with details provided for email and phone. The contract references a comprehensive set of DLA packaging and quality standards that must be met without exception, and all packaging must be marked and labeled in compliance with MIL-STD-129. While the quantity listed is an estimate, the buyer is not obligated to purchase the full amount, but any awarded contract must strictly follow the defined technical, packaging, and delivery protocols outlined. The NSN and part number are critical identifiers for compliance and logistics tracking, and suppliers must ensure all documentation aligns with the DLA’s eProcurement and unit of issue guidelines.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 14 hours ago

DEADLINE

SEAL, PLAINThis contract pertains to the procurement of six plain seals identified by NSN 5330-01-503-4930 under solicitation SPE7LX-26-U-8895, with a delivery requirement of 301 days after award. The item is subject to extensive technical, quality, and export control requirements as defined by the DLA Master List of Technical and Quality Requirements, which incorporate MIL-STD-1916 or ASQ H1331 for sampling unless otherwise specified, with zero non-conformances required in the sample lot unless explicitly stated otherwise. Critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, and unspecified attributes are treated as major. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, opaque bag to prevent ultraviolet degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with supplied hardware, except for functional uses in batteries, fluorescent lights, specified instruments, weapon systems, or chemical reagents authorized by NAVSEA; where permitted, portable devices must include a second barrier of containment per NAVSEA 5100-003D. Configuration changes require formal engineering change proposals, deviation requests, and source approval documentation, while inspection and acceptance may occur at origin, and all government identification must be removed from non-accepted items. Technical data associated with this contract is subject to export controls under ITAR or EAR, and access is restricted to DLA contractors certified under the US/Canada Joint Certification Program, who have completed required DOD training and been approved by DLA. All contractual obligations are governed by tailored higher-level quality requirements and specific documentation standards for verification and compliance.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

LEVER, LOCK-RELEASEThe contract pertains to the procurement of a Lever, Lock-Release with NSN 5340-01-453-2554 and part number A6210372, under solicitation SPE7LX-26-U-8896, issued by the Department of Defense’s Strategic Acquisition Program Directorate. A total quantity of 135 units is requested at a unit price of $135.00, for a total contract value of $18,225. Delivery is required within 65 days FOB origin, with no variance allowed in quantity. The item is covered under DLA Direct, CONUS terms, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s packaging requirements and MIL-STD-129 for marking and labeling, with non-hazardous material packaged per ASTM D3951 unless a higher-priority DLA Master List technical or quality requirement applies. Hazardous materials must follow TQ requirement IP025 per Fed-Std-313. The packaging must also adhere to the DLA Packaging Requirements for Procurement (RP001) and palletization standards. Identification of the item must conform to MIL-STD-130N for military property marking, and the contractor must ensure all government identification is removed from non-accepted supplies. The solicitation is open via DIBBS, and the contract is subject to the revision of the DLA Master List of Technical and Quality Requirements in effect on the solicitation issue date. The primary point of contact is Theodore Misiolek, with response due by August 5, 2026.

Hardware Manufacturing

POSTED

about 14 hours ago

DEADLINE

TREAD, METALLIC, NONSKIDThe contract is for the procurement of two units of metallic nonskid tread with the NSN 2540-01-593-9652 under solicitation SPE7LX-26-U-8910, designated as a Total Small Business Set-Aside. Delivery is required within 109 days after award, and responses must be submitted by August 5, 2026. The item is governed by DLA packaging and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with specific provisions including tailored higher-level quality standards, configuration change management, inspection and acceptance at origin, and strict controls on government identification removal from non-accepted supplies. Only qualified manufacturers listed on approved QPLs or QMLs may supply components, and the contract enforces compliance with MIL-STD-1916 or comparable zero-based sampling plans, assigning verification levels and AQLs according to criticality of attributes. Ozone-depleting chemicals are strictly prohibited, and substitute chemicals require prior approval unless explicitly permitted by specification. Technical data is subject to export controls under ITAR or EAR, restricted to contractors with approved JCP certification, completed DLA training, and authorized access. The contract mandates CMMC Level 2 certification for third-party assessors and requires phosphate coating suppliers to meet specific certification standards. The approved source of supply has been updated from Devcon Corp to ITW Polymers Adhesives North America for part numbers PK9500-3/2 and PK9500-3/2-7. The contracting office is the Strategic Acquisition Program Directorate under the Department of Defense, with Theodore Misiolek as the primary point of contact.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

BAG, CARTRIDGE CLIPThe contract is for the procurement of a neoprene-coated cloth cartridge clip, a critical gun part designated as a Category I munitions item under demilitarization requirements, with strict compliance mandated for technical specifications referenced in the DLA Master List of Technical and Quality Requirements. The item, identified by NSN 1005-01-182-4536 and part number 65751-03013-041, must conform to exact engineering drawings and revision standards, and the actual manufacturer must be formally identified and approved prior to award, with any subsequent changes requiring official contract modification. The product is subject to Product Verification Testing (PVT) before each shipment, requiring five samples from each subcontractor involved in production, one of which may be destroyed during testing, and all samples must be properly marked and traced to their source. Inspection and acceptance occur at the manufacturer’s facility under the Quality Assurance Representative, following zero-defect sampling criteria aligned with MIL-STD-1916 or comparable zero-based plans, with critical attributes held to the highest verification levels and specified AQLs. Packaging must adhere to MIL-STD-2073-1E and DLA requirements, including marking per MIL-STD-129, and no ozone-depleting chemicals are permitted under any circumstances. The contract is a total small business set-aside under NAICS code 314910, with a delivery window of 134 days, FOB origin, no quantity variance allowed, and a unit price of $5.00 for a total of five units.

Textile Bag and Canvas Mills

POSTED

about 14 hours ago

DEADLINE

CLAMP, LOOP.This contract, identified as CLAMP, LOOP, is a solicitation under number SPE7LX-26-U-8888 issued by the Strategic Acquisition Program Directorate within the Department of Defense for the procurement of eight units of a specific clamp and loop component with NSN 5340-00-582-1474. The solicitation is a total small business set-aside under NAICS code 332510, with responses due by August 5, 2026, and an anticipated delivery deadline of 48 days after award. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, subject to any amendment updates. Strict prohibitions apply against the intentional addition of mercury or mercury-containing compounds to the supplied hardware, except for specific functional applications including batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemical reagents authorized by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment boundary to prevent leakage, per NAVSEA 5100-003D. All government identification must be removed from non-accepted supplies, and full compliance with these stipulations is mandatory for contract fulfillment.

Hardware Manufacturing

POSTED

about 14 hours ago

DEADLINE

BRACKET, MOUNTINGThe contract is for the procurement of three mounting brackets with NSN/Part Number 5340-01-693-6794 under solicitation SPE7LX-26-U-8898, with a delivery requirement of 81 days after contract award. The acquisition is structured as a Total Small Business Set-Aside under NAICS code 332510, indicating exclusive eligibility for small businesses. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons or entities without prior authorization from the Department of State or Commerce, including foreign national employees of U.S. companies. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with approved U.S./Canada Joint Certification Program status, who have completed mandatory DOD export control training and the DLA questionnaire, may access the controlled data. The solicitation was posted on July 21, 2026, with responses due by August 5, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek serving as the primary point of contact.

Hardware Manufacturing

POSTED

about 14 hours ago

DEADLINE

HOUSING ASSY, FEEDERThe item specified is a Housing Assembly, Feeder, manufactured via metal casting, requiring specialized tooling for production, with sourcing and technical support available through DLA’s Aviation, Land & Maritime Supply Chains. The procurement is governed by a comprehensive set of technical, quality, and compliance requirements including CMMC Level 2 certification for third-party assessors, tailored higher-level quality standards for manufacturers and non-manufacturers, and strict configuration change management protocols requiring formal engineering change proposals or variance requests. Inspection and acceptance must occur at origin, and non-accepted items must have all government identification removed. Physical identification of the bare item is mandated, and technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting disclosure to foreign persons without prior Department of State or Commerce authorization, with DFARS 252.225-7048 fully applicable. Access to this controlled data is restricted to DLA contractors who hold JCP certification, have completed mandatory DOD export control training, and received formal approval from DLA. The solicitation, identified as SPE7LX-26-U-8906, is a total small business set-aside under NAICS code 332994, issued by the Department of Defense’s Strategic Acquisition Program Directorate. Four units are required with a delivery deadline 186 days after award. The solicitation closed on August 5, 2026, with a posted date of July 21, 2026. Demilitarization requirements apply as this item falls under Category I Munitions List items per DoDM 4160.28-Vol. 3, and it is subject to DLA packaging standards and covered defense information protocols. All technical and quality specifications referenced must be drawn from the DLA Master List in effect on the solicitation issue date. The primary point of contact for inquiries is Theodore Misiolek of DLA, reachable via email or phone provided.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 14 hours ago

DEADLINE

POWER SUPPLYThis contract specifies the procurement of a power supply with NSN 6130-01-502-8006, quantity of six units, under solicitation SPE7LX-26-U-8892, issued by the Department of Defense’s Strategic Acquisition Program Directorate. Delivery is required FOB origin within 104 days with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while strictly adhering to all DLA Master List of Technical and Quality Requirements, particularly RP001 for packaging, MIL-STD-129 for marking and labeling, and PALLETIZATION standards. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be classified with specific verification levels or AQLs. The item is designated a critical application, and mercury or mercury-containing compounds are strictly prohibited except for specific exempted uses such as batteries, fluorescent lights, or instrumentation per NAVSEA guidance, with portable mercury-containing devices requiring shockproof design and secondary containment. All technical and quality requirements referenced by R or I numbers in the DLA Master List govern over general standards. The unit of issue is each, and the contract is issued under DLA Direct, CONUS coverage.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 14 hours ago

DEADLINE

CLEVIS, ROD ENDThe item specified is a CLEVIS, ROD END with NSN 5340-01-579-1843, for a quantity of 61 units, under purchase request 1000237681, with delivery required within 111 days after order. The procurement is conducted under solicitation SPE7LX-26-U-8901, issued on July 21, 2026, with responses due by August 5, 2026. This is a total small business set-aside under FAR 19.5, classified under NAICS code 332722, and managed by the Strategic Acquisition Program Directorate within the Department of Defense. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. The item includes export-controlled technical data subject to ITAR or EAR, restricting disclosure or export to authorized parties only. Access is limited to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and authorized clearance via the DLA. DFARS 252.225-7048 governs the handling of this data, including restrictions on foreign nationals, even when employed by U.S. entities. Government identification must be removed from non-accepted supplies, and the primary point of contact for inquiries is Theodore Misiolek, reachable via email and phone.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

BALL JOINTThe contract is for the procurement of a ball joint with NSN 3040-01-600-1867 and part number 2998K321 from McMaster-Carr Supply Co, under solicitation SPE7LX-26-U-8915, with a total quantity of 16 units at a unit price of $16.00, resulting in a total price of $256.00. The requirement is designated as a Total Small Business Set-Aside under NAICS code 333613, and delivery must be made within 49 days FOB origin with no tolerance for quantity variance. All items must be packaged and marked in strict compliance with MIL-STD-129 and ASTM D3951, but DLA’s Master List of Technical and Quality Requirements takes precedence over any material standard. Inspection and acceptance occur at the destination point, and packaging must follow DLA’s Packaging Requirements for Procurement (RP001), including palletization standards. The U/I is EA and the QUP is specified as 001, meaning each unit pack contains one item. The solicitation was posted on July 21, 2026, with responses due by August 5, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate. Primary point of contact is Theodore Misiolek, reachable via phone or email. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable version determined by the solicitation issue date for simplified acquisitions. The item is covered under DLA Direct, CONUS, and the contract explicitly states that the estimated quantity may not be fully purchased by the IDC. All documentation and labeling must conform to the referenced standards and DLA directives without exception.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

KNOBThis contract, identified as KNOB under solicitation number SPE7LX-26-U-8891, is a total small business set-aside for the procurement of 68 units of a knob with NSN 5355-01-382-5286, requiring delivery within 88 days after award. The contract incorporates stringent technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date. Zero-tolerance policies are enforced for hazardous materials: ozone-depleting chemicals are completely prohibited, and mercury or mercury-containing compounds are banned unless specifically exempted for functional uses such as batteries, fluorescent lights, sensors, or chemical reagents approved by NAVSEA, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. All items must be asbestos-free, and any substitutions require formal approval under clause L30 and provision 4 conditions. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contract explicitly prohibits the use of government identification on non-accepted supplies and mandates full and open competition under a small business set-aside, with Theodore Misiolek designated as the primary point of contact for inquiries.

All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 14 hours ago

DEADLINE