Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Electrical Equipment Labeling and Marking

Active

State & Local

Response Deadline08/05/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the permanent labeling and marking of electrical equipment to ensure compliance with NEC and OSHA safety standards, encompassing nameplates, wire markers, and arc flash hazard labels. This work is essential for ongoing operational safety, regulatory adherence, and personnel protection in facilities where electrical systems are present. The labeling must be durable, legible, and correctly applied to all relevant equipment to meet federal safety requirements and facilitate maintenance, emergency response, and inspection activities. The solicitation was posted on July 16, 2026, with a response deadline of August 5, 2026, and is classified as a subcontract under NAICS code 335999 for other electrical equipment and component manufacturing. Performance will occur across various locations in Michigan under the oversight of the DTMB agency. There is no specified set-aside status, and the contract does not include a designated point of contact or detailed location beyond the generalized place of performance. Interested parties must submit responses by the stated deadline to be considered for award.

General Info

Permanent electrical labeling per NEC/OSHA standards across Michigan facilities, due August 5, 2026.

Agency

Michigan → DTMBView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

Various, MI, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Response DeadlineAug 5

Submission deadline

Response Deadline

08/05/2026, 06:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyMichigan → DTMB

ContactsNo contacts available

OfficeN/A

Organization / Agency

Michigan → DTMB

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Permanent identification of electrical equipment including nameplates, wire markers, and arc flash hazard labels meeting NEC and OSHA safety standards.

Similar Contracts

Same NAICS industry code

CONDUIT, METAL, FLEXIThe contract specifies the procurement of 494 feet of metal flexible conduit meeting MIL-PRF-24758A specifications, delivered in continuous length on a spool or reel with no random cuts permitted. Delivery is FOB Origin, with a required delivery date of April 4, 2027, and a need ship date of March 18, 2026, allowing for a 123-day lead time. Quantity may vary by plus or minus 10 percent, and acceptance and inspection occur at the origin under DLA’s RQ009 requirement, using sampling methods per MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated. Critical, major, and minor attributes are assigned AQL levels of 0.1, 1.0, and 4.0 respectively. Packaging must comply with MIL-STD-2073-1E, with a QUP of 100, preservation method 10 (cleaning/drying), no preservation or wrap material, cushioning made of air-filled plastic, and unit container marked ZZ to denote continuous length on a spool. Marking must adhere to MIL-STD-129, with no special markings required, and palletization follows DLA’s RP001 packaging requirements. The item is identified by NSN 5975-01-525-3170 and is subject to strict mercury restrictions—no intentional addition or direct contact with mercury or mercury compounds is permitted except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents, with portable fluorescent lamps and instruments requiring shock-proof construction and secondary containment. The solicitation is a total small business set-aside under NAICS 335999, requiring full compliance with FAR 52.219-28 and associated small business representations. Contract administration requires use of WAWF for invoicing, and cybersecurity requirements are enforced per DFARS 252.204-7012 and NIST SP 800-171 assessment mandates, with additional provisions covering trafficking in persons, employment eligibility verification, sustainable products, hazardous materials identification, hexavalent chromium prohibition, and export control. Subcontracting for commercial products follows deviation 2026-O00

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

INSULATOR, PLATEThe contract is for a single unit of an insulator, plate, identified by NSN 5970-01-203-5932, with delivery required 20 days after award to a U.S. Army Aviation Depot address in Tainan City, Taiwan. The item is classified as a commercial item and must comply with technical and quality requirements specified in the DLA Master List of Technical and Quality Requirements, including packaging standards under RP001, bare item marking per RQ017, and removal of government identification from non-accepted supplies per RQ011. Packaging must follow MIL-STD-2073-1E at Level B with code Q, using CLNG/DRY preservation method, and bear the Special Marking Code 32 to indicate a non-extendable 60-month shelf life. Marking and labeling must adhere to MIL-STD-129, including barcoding for shipping containers, with hazardous material labeling conforming to 29 CFR 1910.1200 and MIL-STD-129 for radioactive items. Inspection and acceptance occur at origin, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances in the sample lot unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. All shipments must be transported on U.S.-flag vessels unless waived, and the contract employs WAWF for electronic invoicing. The contractor must meet employment and ethical compliance clauses including equal opportunity, combating human trafficking, employment eligibility verification, sustainable products, and hazardous material identification, with additional DFARS requirements for NIST SP 800-171 cybersecurity assessment, subcontractor controls for commercial products, and notification of safety issues. Offerors must provide a Unique Entity ID and CAGE code, declare small business status and any applicable socioeconomic categories, and disclose if they supply covered defense telecommunications equipment. Proposal submissions are mandatory through the DIBBS portal by July 29, 2026, with point of contact for technical inquiries listed as Shenika Thompson.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

BATTERY POWER SUPPLYThe contract is for the procurement of 19 units of a battery power supply identified by NSN 6130-01-525-0952, issued under solicitation SPE7L7-26-T-4297 as a total small business set-aside. The item requires delivery to Robins Air Force Base, Georgia, with a delivery window of 431 days after order and a mandatory ship date of September 29, 2027. The packaging and handling of the item must fully comply with MIL-STD-2073-1E for packaging and preservation and MIL-STD-129 for marking, labeling, and barcoding, and must include dry storage conditions with a strict 24-month non-extendable shelf life. The shipment is subject to FOB origin terms and must be invoiced exclusively through the Wide Area WorkFlow system using an invoice and receiving report combo format. The item is subject to export control under ITAR or EAR, requiring compliance with DFARS 252.225-7048, and distribution is restricted to DLA contractors with approved JCP certification, completed training, and formal authorization to access controlled technical data. The contractor must ensure all hazardous materials are labeled per 29 CFR 1910.1200 and must notify the Contracting Officer in writing prior to shipment if any component contains radioactive materials exceeding specified thresholds. All offers must be submitted electronically via DIBBS by the July 29, 2026 deadline and must include a valid Unique Entity ID and CAGE code. The contractor must affirm small business status and complete all required representations, including compliance with clauses on employment eligibility, equal opportunity, combating trafficking, and whistleblower rights. The contract incorporates DFARS clauses requiring NIST SP 800-171 compliance for cybersecurity, and mandates that the manufacturer be certified as a CMMC Level 2 accredited third-party assessment organization. No pricing details are confirmed beyond the quantity and extended value of $19.000, and the basis of award remains unspecified. The contractor is responsible for ensuring conformity to all inspection criteria at the destination point, with acceptance governed by zero non-conformance requirements for critical attributes and sampling standards aligned with MIL-STD-1916 and ASQ standards.

POSTED

DEADLINE

Power Supply and Fan Tray Supply (Core Component)Nine power supplies with integrated fan trays are being procured under a small business set-aside contract, specifically designated for total small business participation, to meet stringent technical and environmental standards suitable for military or industrial applications. The requirement is for fully integrated units that ensure reliable operation under demanding conditions, with all components designed to function effectively within the specified operational environment. The contract falls under NAICS code 335999 and is managed by the Department of Commerce, NOAA, with performance expected to occur in Grandview, Missouri, under a tight timeline requiring responses by August 4, 2026, following a posting date of July 24, 2026. The procurement is structured as a subcontract opportunity, emphasizing compliance with federal acquisition regulations and the necessity of meeting exacting performance benchmarks for mission-critical applications.

Department Of Commerce Noaa

POSTED

DEADLINE

Marine-Grade Coaxial Cable and Connector SupplyThe contract calls for the supply of 100 feet of marine-grade coaxial cable with a 75-ohm impedance, designed to be waterproof and low-loss, ensuring reliable signal transmission in harsh maritime environments. The cable must be terminated with N-type connectors and fully compliant with established maritime performance standards to withstand saltwater exposure, vibration, and extreme weather conditions typical of naval and coastal operations. All materials must meet strict durability and electrical performance benchmarks to ensure long-term functionality aboard vessels and shore-based maritime systems. This is a total small business set-aside under the SBA program, restricted exclusively to small business concerns as defined by the SBA size standards for NAICS code 335999. The solicitation was posted on July 24, 2026, with a response deadline of July 27, 2026, and is managed by the Naval Supply Systems Command Fleet Logistics Center Pearl Harbor under the Department of Defense. Performance is required at Joint Base Pearl Harbor-Hickam, zip code 96860, with the contract classified as a subcontract under federal procurement guidelines. The award will support critical communications and electronic systems integral to naval operations in the Pacific region.

Navsup Flt Logistics Ctr Pearl Harbor

POSTED

DEADLINE

High-Power Generation Equipment Configuration and Software ModificationThe contract requires on-site configuration of high-power generation equipment with specific technical demands, including proprietary modifications to both PLC software and hardware to achieve stable low-current output, minimal electrical ripple, and rapid response times. This work must be performed at the designated location in Bethesda, Maryland, with a response deadline set for July 30, 2026, and the opportunity posted on July 24, 2026. The effort is classified as a subcontract under NAICS code 335999, falling under the jurisdiction of the Department of Defense through the NSWC Carderock organization. All performance and technical deliverables are expected to meet stringent operational standards, with the success of the project dependent on precise real-time adjustments to the control systems. There is no set-aside designation or specific point of contact listed, and the solicitation number is not provided.

POSTED

DEADLINE

Electrical Equipment & TestingThe Naval Air Warfare Center, Weapons Division, China Lake, intends to award a sole source firm fixed price contract to Acumentrics for the delivery and testing of one lot of electrical equipment designated as ANB1501RSPNLIA. This action is justified under FAR 6.103.1 because Acumentrics is the original equipment manufacturer and the only source capable of performing the necessary performance testing required to ensure compatibility with existing on-site systems. No request for quotes will be issued, and this notice serves only as an announcement of intent to proceed without competition. Interested parties may submit a capability statement by 07/29/2026 at 0900 to demonstrate their ability to meet the technical requirements for quality, accuracy, reliability, and schedule, referencing solicitation number N6893626SIMACQD550000E5500000371. All submissions must be sent to Yvonne Stockwell at yvonne.c.stockwell.civ@us.navy.mil. Vendors must maintain an active registration in SAM.gov prior to any potential award, as the government cannot obligate funds to entities without an active status, and processing SAM verification can take up to 15 days. Additionally, contractors must be certified through the Defense Logistics Information Services Joint Certification Program to access Controlled Unclassified Information or Export Controlled Information. Access to such information is restricted to a single designated Data Custodian per CAGE code, who must have an approved DD 2345 form. Contractors are responsible for coordinating with their CAGE code’s Data Custodian to obtain proper authorization before requesting access to CUI. Failure to comply with these requirements will result in disqualification from consideration.

Naval Air Warfare Center

POSTED

DEADLINE

RFQ - Buckley SFB Rectifier Inverter System ReplacementThe government is seeking a contractor to fully replace the rectifier/inverter system in Building 730, Room 132 at Buckley Space Force Base, Colorado. This system is critical for converting alternating current to direct current to support reliable power delivery for the Department of the Air Force’s long-haul communications infrastructure, drawing from commercial power, backup generators, and battery-based uninterruptible power supplies. The replacement must ensure continuous, stable operation of essential communications systems. A mandatory site visit is scheduled for July 31, 2026, at 1000 Mountain Time, and all prospective offerors must register their attendees by 1400 Mountain Time on July 29, 2026. Contractors must arrange base sponsorship through the visitor center prior to the visit and arrive early enough to complete the process before the scheduled start time. This request for quotation is a total small business set-aside under NAICS code 335999 and is issued under solicitation number FA254326Q0011 by the Department of Defense through the 460 Cons office. Offers must be submitted no later than 1100 Mountain Time on August 6, 2026, to the designated Contracting Officer and Contract Specialist. Late submissions will not be accepted. The primary point of contact is Maurice Epps, with secondary support from Matt Kennedy, TSgt. The place of performance is located in Aurora, Colorado, with a zip code of 80010, and all correspondence and submissions must be directed to the provided email addresses. The solicitation was posted on July 24, 2026, and is accessible via the SAM.gov portal.

FA2543 460 Cons

POSTED

DEADLINE

Airborne Direction Finding SystemsThe U.S. Navy’s Naval Information Warfare Center Atlantic is conducting market research through a Request for Information (RFI) to identify industry capabilities for an airborne Direction Finding (DF) system designed for use by United States Special Operations Command. The system must rapidly and accurately geolocate threat emitters in contested radio frequency environments, operating across the HF to SHF frequency spectrum with a Modular Open Systems Approach (MOSA) architecture. Respondents are required to provide detailed technical data including antenna type, gain, VSWR, and DF accuracy graphs; complete Size, Weight, Power, and Cooling (SWaP-C) specifications for all components; Technology and Manufacturing Readiness Levels with supporting evidence; interface capabilities with software defined radios via Ethernet and RF ports for IF data; and a supply chain risk management plan identifying whether the solution is Commercial Off-the-Shelf, Government Off-the-Shelf, or modified. The system must be ruggedized and tested to comply with MIL-STD requirements and is expected to be significantly lighter and more power-efficient than existing systems. All submissions are unclassified, treated as public information, and become Government property without compensation. Respondents are requested to provide a non-binding Rough Order of Magnitude cost for 10, 50, and 100 units covering the antenna, processor, software, training, and a one-year warranty. Production capability and estimated lead times for initial and full-rate production must be described, including scalability to meet delivery requirements. The RFI is not a solicitation, proposal, or contract opportunity, and the Government will not award a contract based on responses; however, it intends to leverage Other Transaction Authority or Commercial Solutions Opening for future prototype efforts. Responses are due by noon EDT on July 17, 2026, and must be submitted via email to the designated point of contact. The NAICS code is 335999 with no set-aside applied.

POSTED

DEADLINE

in about 1 month

INSULATION PIPEThe Fleet Logistics Center Puget Sound is seeking insulation pipe with specific part numbers 6RHFN068658, 6RHFN068858, 6RFHN068558, and 6RHFN068418 under a sole source arrangement with K-Flex LLC, though the government is open to evaluating interest from other vendors to determine if competition is feasible. The procurement is structured as a Total Small Business Set-Aside, and offers will be assessed for technical capability including delivery timing, price reasonableness, and past performance without prioritizing any single factor. The evaluation will follow RFO 12.203 guidelines to select the most advantageous offer. The anticipated award is scheduled for August 2026, with quotes due by August 7, 2026. The solicitation is issued under NAICS code 335999 and is managed by the Department of Defense through Naval Supply Systems Command. The primary point of contact for the procurement is Taura Helms, reachable at taura.s.helms3@navy.mil, with secondary support from Denise Manor. Performance will occur in Yokosuka, and all responses must be submitted via the SAM.gov portal referenced in the solicitation details.

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

Dynapower system configurationThe Naval Surface Warfare Center Carderock Division is soliciting a sole-source contract with Dynapower LLC for the system configuration of high-power generation equipment under FAR Part 13.106-1(b), citing unique circumstances that justify non-competitive procurement. The NAICS code is 335999 with a small business size standard of $600 million in annual receipts, and no set-aside is being used. The solicitation, identified by number N0016726Q1128, incorporates all applicable provisions and clauses effective through Federal Acquisition Circular FAC 2026-01 and DFARS DPN 20260702, with full terms detailed in the attached solicitation document. Interested parties may express interest by submitting a capabilities statement by 12AM EST on July 30, 2026, which must include pricing, FOB point, point of contact details, GSA contract number (if applicable), business size, payment terms, and clear demonstration of ability to meet all technical requirements. Responses must be sent via email to Steven Besanko at steven.w.besanko.civ@us.navy.mil, and while this notice is not a formal request for quotes, all submissions received by the deadline will be reviewed to determine whether a competitive procurement is warranted. The contract will be performed at the organization’s location in Bethesda, Maryland.

POSTED

DEADLINE

New Eaton UPS Battery & RentalThe solicitation for the New Eaton UPS Battery & Rental, identified as BD3-007 and issued by the Commanding Officer of the Naval Surface Warfare Center, Port Hueneme Division, is a total small business set-aside under FAR 19.5 with a NAICS code of 335999. The requirement is for the procurement and installation of a permanent Eaton 93PM 40kW UPS system with an integrated Narada 9-Module Lithium Battery cabinet and a Power Xpert Gateway Card for remote monitoring, alongside an eight-month rental of a Powerware 9390 40kVA UPS and matching battery cabinet. The contract includes full turnkey services: removal and EPA-compliant disposal of the existing faulty UPS, manufacturer-certified installation and commissioning of both the rental and permanent systems, crane-assisted rigging, and a five-year OEM support package consisting of a standard one-year warranty plus a four-year extended warranty with annual preventive maintenance visits. All hardware must be new, unused, non-refurbished, and commercially available for at least ten years from government acceptance, with firmware security patches guaranteed for the duration of the warranty. Performance is to occur at Building 1524, Naval Surface Warfare Center, Port Hueneme, California, with delivery and acceptance at the designated receiving location, and the entire period of performance is thirty-six weeks from award, accommodating a thirty-week lead time for equipment. The system must pass a 72-hour continuous IT load burn-in with zero faults before joint inspection and final acceptance, and the contractor must submit as-built drawings, commissioning logs, O&M manuals, and a valid warranty certificate in both digital and physical formats. Pricing is firm fixed price, and award will be made on a lowest-priced, technically acceptable basis, with technical capability and past performance serving as pass/fail gates. All submissions must be in PDF format via email to the designated point of contact by the revised deadline of July 23, 2026, at 3:00 p.m. PST, with no hard copies accepted. Offerors must be registered in SAM, hold a valid CAGE code, represent their small business status, ensure quote validity for 90 days, comply with all specified clauses including DoD unique item identification per MIL-STD-130 and MIL-STD-129, use WAWF for electronic invoicing, and adhere to Buy American requirements, antiterror

Commanding Officer

POSTED

DEADLINE

More opportunities from Michigan → DTMB

Same awarding agency

Minority, Woman, or Disabled-Owned Business (M/W/DBE) Subcontracting OpportunitiesCertified Minority, Woman, or Disabled-Owned Business (M/W/DBE) firms are invited to pursue subcontracting opportunities across multiple trades including electrical, plumbing, and environmental services under this solicitation issued by the Michigan Department of Technology, Management and Budget. Participation by M/W/DBE firms is actively encouraged as a means of promoting equitable economic inclusion, though it is not a mandatory requirement for bidders. The opportunity is categorized under NAICS code 238210, which aligns with electrical contracting services, and performance may occur at various locations across the state. Interested firms must submit their responses by the deadline of August 5, 2026, at 6:00 PM Eastern Time, with the solicitation posted on July 24, 2026. There is no formal set-aside designation, and the contract type is classified as a subcontract, allowing eligible businesses to position themselves as potential partners on larger project teams. All relevant details and submission instructions can be accessed through the provided state procurement portal link.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Security Guard Services (Temporary Site Security)The contract calls for the provision of temporary security personnel to guard construction sites during periods when permanent security systems are offline or when unsecured openings are created due to ongoing work. This subcontract is issued by the Michigan agency DTMB under NAICS code 561612 for private security services and is intended to ensure physical security continuity when automated or fixed protections are compromised. The services will be performed at various locations across the state, with no single fixed site of performance, requiring providers to deploy personnel flexibly to multiple active construction zones. Bids must be submitted by August 5, 2026, with the solicitation posted on July 24, 2026, and no set-aside provisions or specific organization type restrictions are indicated. The contract emphasizes rapid response and reliable on-site presence to mitigate risks during transient vulnerabilities in site security infrastructure.

Security Guards and Patrol Services

POSTED

DEADLINE

Waste Management & Recycling ServicesThe contract seeks subcontractors to provide onsite sorting, recycling, and disposal of construction debris across various locations in Michigan, requiring a comprehensive waste management plan to ensure compliance with environmental and regulatory standards. Contractors must implement procedures to maximize recycling rates, properly segregate materials, and safely dispose of non-recyclable waste, all while adhering to established protocols for handling hazardous and non-hazardous materials. Weekly progress reports are mandatory to document volumes processed, recycling percentages, disposal methods, and any deviations or issues encountered during operations. The solicitation is open for responses until August 5, 2026, under the NAICS code 562111 for solid waste collection and treatment services, and is structured as a subcontract opportunity managed by the Michigan agency DTMB. Performance will occur at multiple unspecified construction sites throughout the state, necessitating flexible logistics and local coordination. Bidders must demonstrate experience in construction waste management, possess the equipment and personnel to handle daily onsite operations, and submit a detailed plan outlining their approach to compliance, reporting, and sustainability goals. There is no set-aside designation, and responses must be submitted through the provided Michigan state procurement portal.

Solid Waste Collection

POSTED

DEADLINE

Lead-Based Paint AbatementThe contract titled Lead-Based Paint Abatement pertains to the safe removal and disposal of lead-based paint in various locations across Michigan, requiring strict adherence to state and EPA regulations. The work demands comprehensive containment measures to prevent cross-contamination, full protection protocols for workers including proper PPE and training, and detailed compliance reporting to document all procedures and waste handling. All activities must meet federal and state environmental and occupational safety standards to ensure public health and regulatory integrity. Submitted as a subcontract, the opportunity is open for responses until August 5, 2026, with the posting date listed as July 24, 2026. The NAICS code 562910 classifies this under Remediation Services, and the overseeing agency is DTMB under the Michigan state organization. Performance will occur at multiple unspecified sites within the state, and interested parties must access the official portal via the provided link to review requirements, submit proposals, and ensure alignment with all technical and administrative conditions outlined by the procuring entity.

Remediation Services

POSTED

DEADLINE

Asbestos Abatement ServicesThe contract for Asbestos Abatement Services requires the identification, containment, and safe removal of asbestos-containing materials during demolition activities across various locations in Michigan. All work must strictly adhere to state regulations governing asbestos handling, including proper encapsulation, worker protection, and decontamination procedures. Compliance with attestation requirements is mandatory, ensuring documentation of all steps taken to meet environmental and safety standards throughout the process. The work is classified under NAICS code 562910 and is structured as a subcontract, with responses due by August 5, 2026. The procurement is managed by DTMB under the State of Michigan, and performance is expected to occur at multiple unspecified sites within the state. Access to detailed solicitation materials is available through the provided online portal.

Remediation Services

POSTED

DEADLINE

Bathroom & Plumbing Renovation (Shower and Fixture Upgrades)The contract involves the demolition and complete replacement of plumbing systems and bathroom fixtures across multiple occupied state facilities in Michigan, with a focus on fully renovating shower rooms and restroom areas. Work must be performed without disrupting ongoing operations, requiring careful coordination and adherence to strict operational protocols to ensure safety and minimal interference with facility occupants. The scope includes removing outdated or damaged components and installing new, modern plumbing infrastructure and fixtures to meet current standards and improve functionality. This is a subcontract opportunity governed by NAICS code 238220, classified under plumbing, heating, and air-conditioning contracting, with a response deadline of August 5, 2026. The contract is managed by the Michigan Department of Technology, Management and Budget, and performance will occur at various locations throughout the state. Bidders must be prepared to handle complex logistics in active environments, and all work must comply with state facility regulations, health and safety standards, and timelines that accommodate ongoing occupancy. The solicitation is accessible via the Michigan state procurement portal.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Electrical Systems Installation (Power & Low-Voltage Wiring)The contract encompasses the full installation of electrical systems, covering power wiring, conduit, junction boxes, and both Class 2 and Class 3 low-voltage wiring systems. This includes all necessary testing, commissioning, and coordination with other trades to ensure seamless integration and operational readiness. Work is required across multiple locations identified as various sites within Michigan, with no single fixed address specifying the place of performance. The scope mandates compliance with industry standards for both high and low-voltage installations, with emphasis on precision, safety, and timely completion. This is a subcontract solicitation under NAICS code 238210 for Electrical Contractors, posted on July 24, 2026, with a response deadline of August 5, 2026. The contracting entity is DTMB, the Michigan Department of Technology, Management and Budget. The procurement is open to qualified subcontractors seeking to provide comprehensive electrical services, and interested parties must respond via the designated state portal before the deadline. There is no set-aside designation specified, and all proposals must meet the technical and logistical demands of a multi-site, coordinated installation effort.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Printing and Bidding Document ReproductionThe contract entails high-volume printing and reproduction of bidding documents and construction packages, with specialized handling of large-format materials and professional binding services required to meet project specifications. Work must be executed with precision to ensure documents are accurate, legible, and properly assembled for distribution to contractors and stakeholders involved in public construction initiatives. The scope demands capability in managing large quantities of technical documentation under tight deadlines and quality standards suitable for governmental procurement processes. This is a subcontract opportunity under the NAICS code 323111, issued by the Michigan agency DTMB, with a posting date of July 24, 2026, and a response deadline of August 6, 2026, at 6:00 p.m. No set-aside designation is specified, and the place of performance and point of contact details are not provided in the data, though the work is tied to Michigan-based projects. Interested parties must submit proposals through the designated online portal prior to the deadline to be considered for award.

Commercial Printing (except Screen and Books)

POSTED

DEADLINE

Environmental, Geotechnical, and Surveying Sub-Consultant ServicesThe contract outlines the provision of reimbursable sub-consultant services focused on environmental, geotechnical, and surveying support, including soil borings, site surveys, environmental testing, and laboratory analysis. These services are intended to support broader infrastructure or development projects under the oversight of the Michigan agency DTMB, with work to be performed at unspecified locations within the state. The solicitation is classified under NAICS code 541620, indicating it relates to environmental consulting services, and is structured as a subcontract with no set-aside designation, making it open to all eligible vendors. The opportunity was posted on July 24, 2026, with a response deadline of August 6, 2026, and bidders must submit proposals through the Michigan government’s online procurement portal. Payment for services rendered will be on a reimbursable basis, meaning costs incurred by the sub-consultant will be reimbursed by the prime contractor upon verification and approval. All technical work must meet applicable regulatory and industry standards to ensure accurate data collection and reporting for environmental compliance and geotechnical evaluation purposes.

Environmental Consulting Services

POSTED

DEADLINE

CAD Drafting and Technical DocumentationThe contract involves the production of detailed construction drawings, technical specifications, and as-built documentation compliant with AutoCAD and DMVA CAD standards, ensuring precision and consistency in engineering deliverables. The work is classified under NAICS code 541370, indicating it falls within the architectural and engineering services sector, and is structured as a subcontract requiring adherence to specific technical protocols established by the Michigan agency. All documentation must meet rigorous quality benchmarks to support construction and maintenance activities. The solicitation was posted on July 24, 2026, with a strict response deadline of August 6, 2026, at 6:00 PM, leaving a limited window for qualified vendors to submit proposals. The contracting entity is DTMB, operating under the Michigan state organizational structure, though the precise location of performance and point of contact details are not specified. The primary focus is on technical execution rather than procurement type or set-aside provisions, with all deliverables expected to be fully compliant with state-mandated CAD standards. Interested parties must access the official system via the provided UI link to submit responses.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

Landscape Architecture ServicesThe contract titled Landscape Architecture Services seeks specialized expertise in designing sustainable exterior spaces with a focus on rain gardens and their seamless integration with civil and architectural systems. The work is intended to support environmentally resilient infrastructure, emphasizing water management, native vegetation, and harmonious coordination with surrounding built environments. This subcontract is issued under NAICS code 541320, which pertains to landscape architecture services, and is managed by the Michigan agency DTMB with a response deadline of August 6, 2026. The project is expected to involve detailed planning, analysis, and implementation of ecological design solutions that meet sustainability standards and enhance public or institutional spaces. There is no specified set-aside status or place of performance details provided, and all submissions must be completed through the specified Michigan state procurement portal prior to the deadline.

Landscape Architectural Services

POSTED

DEADLINE

Civil Engineering and Stormwater ManagementThe contract focuses on civil engineering and stormwater management services, requiring the design of comprehensive stormwater management systems, erosion control plans, rain gardens, and civil site layouts that include drainage and utility infrastructure. The work supports environmental compliance and sustainable land development through thoughtful hydrologic and hydraulic engineering solutions tailored to the project location in Michigan. All deliverables must align with applicable regulatory standards and local land use requirements to ensure effective water quality protection and stormwater runoff mitigation. Issued as a subcontract under NAICS code 541320 by the Michigan-based DTMB agency, the opportunity was posted on July 24, 2026, with a response deadline of August 6, 2026. The solicitation does not specify a set-aside classification or contracting office address, and technical submissions must be submitted through the designated Michigan state procurement portal. Interested parties are expected to demonstrate expertise in civil site design, stormwater infrastructure planning, and implementation of green stormwater practices such as rain gardens and erosion controls, with a strong emphasis on deliverables that integrate seamlessly into broader construction or development projects.

Landscape Architectural Services

POSTED

DEADLINE