This Government Contract opportunity from Michigan was posted on July 17, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Electrical Installation and Wiring Services

Closed

State & Local

Submission Closed07/22/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238210

New

SLED

Elevator Lobby 2 Way CommunicationsThe contract involves the installation of 23 new two-way communication boxes in elevator lobbies across the terminal, including 17 primary elevators, 3 service elevators, and 3 ramp landing elevators. The work is part of a broader effort to enhance emergency communication systems in airport elevator environments, ensuring compliance with safety and accessibility standards. The project is managed by the Aviation Project Management Group under the Port of Seattle, with primary point of contact Angela Peterson and Project Manager Christina Burdett available for inquiries. The solicitation was posted on July 22, 2026, and is classified under NAICS code 238210 for electrical contractors, indicating that qualified electrical or communications installation firms are expected to bid. The physical location of the work is at the Port of Seattle’s facility, though exact address details are not provided. The contract is currently in forecast status, indicating it is a planned future opportunity rather than an active solicitation, allowing potential vendors time to prepare submissions.

Aviation Project Management Group

POSTED

DEADLINE

Variable Frequency Drives (VFD) Replacement Phase 3 (DBB)The contract entails the complete removal and replacement of 125 aging Robicon variable frequency drives with new, modern equipment to ensure reliable and efficient operation. The project requires the integration of these new VFDs into the Port’s Direct Digital Controller system to enable comprehensive monitoring of energy consumption, real-time output control readings, and system efficiency analytics. All necessary wiring, installation, testing, and commissioning activities must be completed to deliver a fully functional and seamlessly connected system. The work is part of Phase 3 of a multi-phase initiative under the Aviation Facilities & Infrastructure division of the Port of Seattle, with performance expected to occur within the Port’s operational facilities. Primary point of contact for inquiries is Yanet Maldonado, with Sharon Miick serving as the project manager, and all communications should be directed through their provided contact details.

Aviation Facilities & Infrastructure

POSTED

DEADLINE

Operational Security Cameras Bagwell and North Cargo AreasThe contract entails the design, permitting, and construction of a new camera system to enhance security and operational oversight across the Bagwell and North Cargo Operations areas of the Port of Seattle. Approximately 50 high-resolution cameras will be installed at 43 distinct locations to replace and expand upon existing surveillance infrastructure, which currently focuses narrowly on conveyor systems and security doors. The upgrade aims to significantly improve forensic investigation capabilities and support enforcement of the Port’s movement rules and regulations by providing clearer, more comprehensive visual coverage of critical transit zones, including main drive lanes and entrances. In the Bagwell area, camera placement will be optimized to monitor vehicle flow and access points with greater precision, while in the North Cargo area, flexible pan-tilt-zoom units will be deployed to deliver dynamic, user-controllable surveillance across large surface areas, bridging gaps in current coverage. The project is managed by the Aviation Project Management Group under the Port of Seattle and is classified under NAICS code 238210 for special trade contractors. Point of contact for inquiries includes Angela Peterson as the Port Contact and Randa Williams as the Project Manager, with all work expected to be performed on-site at the Port facilities.

Aviation Project Management Group

POSTED

DEADLINE

Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement (Re-bid)The Port of Seattle’s Aviation Project Management Group is soliciting bids to replace the existing aqueous film-forming foam (AFFF) fire suppression system at the Rental Car Facility located in SeaTac, which contains per- and polyfluoroalkyl substances (PFAS). The project requires complete removal of the contaminated foam system components and associated hazardous materials, followed by the design and installation of a new full dry chemical fire suppression system. This includes new storage tanks, valves, pumps, sprinkler lines, sprinkler heads, and reserve tanks, all of which must be integrated with the facility’s existing fire alarm system to ensure full operational compatibility and compliance with fire safety standards. The work is classified under NAICS code 238210 and is being pursued as a quick turnaround initiative to address environmental and regulatory concerns associated with PFAS contamination. The solicitation, titled Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement (Re-bid), was posted on July 22, 2026, and is being managed by the Port of Seattle. Primary point of contact is Todd Rehm, reachable at 206-787-5747 or rehm.t@portseattle.org, with Pat Nakamura serving as the project manager. All work must be performed on site at 3150 S 160th, SeaTac, and bidders are expected to demonstrate experience in hazardous material abatement, dry chemical system installation, and coordination with fire alarm systems. The project represents a critical infrastructure upgrade to ensure safety while eliminating environmentally harmful substances.

Aviation Project Management Group

POSTED

DEADLINE

Parking Garage UPSThe contract involves the demo and replacement of the existing uninterruptible power supply system in a parking garage, ensuring continuous backup power for ticketing kiosks and associated access gates. The scope includes the installation of new UPS equipment, along with supporting components such as subpanels, electrical feeders, disconnects, and breakers, to modernize and enhance system reliability. The new UPS system will feature integrated data connections to enable remote alarm monitoring and real-time status reporting, improving operational oversight and maintenance responsiveness. The project is managed by the Aviation Project Management Group under the Port of Seattle, with primary point of contact Yanet Maldonado and project manager JJ Jordan available for inquiries. This forecasted solicitation, posted in July 2026, is classified under NAICS code 238210, indicating it falls within electrical contracting services. The work will be performed at the parking garage location managed by the Port, though specific address details are not provided. All equipment and installations must meet current electrical standards and support seamless integration with existing garage systems.

Aviation Project Management Group

POSTED

DEADLINE

Electrical Unit Price Portwide 2026The contract outlines the scope of electrical work to be performed across multiple Port of Seattle facilities including Seattle-Tacoma International Airport, Maritime Properties, and surrounding areas. It encompasses the full range of electrical installations such as raceways, wiring, medium voltage cabling, boxes, transformers, electrical devices, temporary power and lighting systems, testing, and grounding, all executed in strict compliance with local and national code-enforcing regulations. The Contractor is responsible for providing all labor, tools, equipment, materials, and incidental resources required to complete the work, with tasks initiated and directed through official Work Authorizations issued by the Port of Seattle. All labor must be performed by personnel classified according to the Schedule of Unit Prices, ensuring standardized compensation and skill-level alignment. The contract is designated under NAICS code 238210 and is forecasted for performance beginning in 2026 under the title Electrical Unit Price Portwide 2026. Primary point of contact is Heather Bowden, with Lesley Miles serving as Project Manager, both reachable through official Port of Seattle channels. The work is not tied to a single location but spans the Port’s extensive operational footprint, requiring flexibility and coordination across various sites. No solicitation number has been issued yet, indicating this is a pre-solicitation forecast to prepare potential vendors for upcoming procurement.

Port Construction Services

POSTED

DEADLINE

27-05-DPS On Call Electrical ServiceThe contract titled 27-05-DPS On Call Electrical Service is a solicitation issued by the Massachusetts agency COSPD - Purchasing for on-call electrical services. The solicitation, identified by number BD-27-1165-COSPD-COS01-131616, was posted on July 22, 2026, with a response deadline of August 6, 2026, at 4:00 PM. The services are required to support operations at the agency’s location on Washington Street in Salem, Massachusetts, with a ZIP code of 01970. The point of contact for this solicitation is Anthony Delaney, designated as the Purchaser. The contract type is aimed at securing a vendor capable of providing timely and reliable electrical services as needed, though specific scope details such as NAICS code or set-aside status are not provided. Interested parties must submit responses through the designated online portal linked in the solicitation.

POSTED

DEADLINE

Intercom replacementThe contract involves replacing all existing call and push button intercom systems across 667 residential units in 07 buildings located at Brady Drive in Framingham, Massachusetts. All entrance doors will be secured with locking mechanisms as part of the upgrade, and the project requires complete removal of the current intercom hardware with installation of new, modernized systems. Bidding is exclusively electronic through biddocs.com, and hard copy submissions will not be accepted; interested parties must register as electronic bidders following the detailed instructions provided in the bid documents. Proposals must be submitted by the deadline of August 12, 2026, at 8:00 PM EST. The solicitation is issued by the FHA01 - Framingham Housing agency under the Massachusetts state agency, with Kristin Davis listed as the primary point of contact for procurement inquiries. The place of performance is identical to the agency’s office address in Framingham, MA, and no set-aside or NAICS code details are specified.

FHA01 - Framingham Housing

POSTED

DEADLINE

Electrical Conduit and Instrument WiringThis contract requires the installation of electrical conduits, junction boxes, and wiring to support the instrument air system’s controls, sensors, and monitoring devices. The scope includes full termination of all electrical connections, proper labeling of components for identification and maintenance, and comprehensive continuity testing to ensure system integrity and operational reliability. All work must be performed to meet industry standards for safety, durability, and performance in an industrial environment. The contract is structured as a subcontract under NAICS code 238210, which classifies the work as electrical contracting services, and is issued by Philadelphia Gas Works in Pennsylvania. The solicitation was posted on July 22, 2026, with responses due by August 14, 2026, at 6:00 PM, and the place of performance is not specified beyond the state location. No set-aside provisions are indicated, and the contract is open to qualified subcontractors meeting the technical and operational requirements outlined in the solicitation.

Philadelphia Gas Works

POSTED

DEADLINE

Electrical & Fire Alarm System UpgradesThe contract seeks to upgrade electrical systems to support new medical equipment and integrate enhanced fire alarm and security systems at a facility in Jackson, Mississippi, with a zip code of 39216. The work is scoped under NAICS code 238210, identifying it as an electrical contracting project, and is designated as a Service-Disabled Veteran-Owned Small Business Set Aside, meaning only eligible businesses owned by service-disabled veterans may bid. The solicitation was posted on July 22, 2026, with responses due by August 5, 2026, at 7:00 PM. It is structured as a subcontract and falls under the jurisdiction of the Department of Veterans Affairs, specifically managed by the 256-NETWORK Contract Office 16 (36C256). The project aims to modernize critical infrastructure to ensure compliance with safety standards and accommodate advanced medical technology, requiring specialized expertise in both electrical and life safety system integrations.

256-NETWORK Contract Office 16 (36C256)

POSTED

DEADLINE

Ceiling-Mounted Patient Lift SystemThe contract pertains to the structural reinforcement and installation of a ceiling-mounted patient lift system within a radiology suite, aimed at enhancing patient mobility and safety during medical procedures. Work scope includes necessary modifications to support the weight and operational demands of the lift system, ensuring compliance with medical facility standards and accessibility requirements. The installation must integrate seamlessly with existing infrastructure while maintaining a sterile and functional environment conducive to radiological operations. This is a subcontract classified as a Service-Disabled Veteran-Owned Small Business Set Aside, with the NAICS code 238210 indicating commercial and institutional building construction. The opportunity was posted on July 22, 2026, with a response deadline of August 5, 2026. Performance is designated to take place in Jackson, Mississippi, 39216, under the purview of the Department of Veterans Affairs through the 256-NETWORK Contract Office 16. The set-aside status prioritizes award to qualifying service-disabled veteran-owned small businesses, and all proposers must meet the associated eligibility and compliance criteria for this designation.

256-NETWORK Contract Office 16 (36C256)

POSTED

DEADLINE

American Embassy Tunis / INL - Secure Remote Court Installation and ConfigurationThe U.S. Embassy in Tunis, Tunisia, through the Department of State, is soliciting proposals for the installation and configuration of Cisco equipment to implement a national Cisco Meeting Server (CMS) videoconferencing solution for the Tunisian Ministry of Justice, enabling remote court hearings across 32 sites including twelve courts, eighteen prisons, one juvenile rehabilitation center, and the Ministry’s data center. The contract is a firm fixed-price award to be given to the lowest-priced technically acceptable and responsible offeror, with no discussions anticipated after initial submissions. All offerors must be registered in the System for Award Management (SAM) and provide proof of their Unique Entity Identifier (UEI), along with a completed IRS Form W-14 to comply with tax regulations. The scope of work, detailed in Attachment A, includes full integration, commissioning, testing, training, skills transfer, and three years of contractual maintenance, with performance must meet a strict standard of no more than one customer complaint per month. Equipment specified includes 68 Samsung 65-inch TVs, 24 Cisco Webex Room Kit Plus units, 20 Cisco Webex Room Kit units, 68 wall mounts, and a dedicated server for the data center, all to be delivered FOB destination in Tunis, with pricing required in Tunisian Dinars and VAT explicitly excluded due to U.S. Embassy tax exemptions. The contract has a 90-day performance period from award date, with a potential optional extension not exceeding six months total. Offerors must designate a Project Manager with at least ten years of video experience and proficiency in English and submit full compliance documentation including SF-1449 completed with required blocks, Section 5 representations, and all requested certifications. The proposal submission deadline has been extended to July 31, 2026, at 4:00 PM Tunis Time (UTC+1), and must be submitted electronically in English to specified State Department email addresses in MS-Word, Excel, or PDF format, with individual files not exceeding 30 MB. Payment will be made upon acceptance of deliverables based on the firm fixed-price terms, with invoices sent to tunisvoucherexaminers@state.gov and must include all elements required by FAR 32.905(e). A Contracting Officer’s Representative will be designated at award to oversee performance, document complaints, and ensure compliance with quality standards. Contractors must also disclose any telecommunications equipment manufacturers or distributors per U.S. federal restrictions and are subject to a

US Embassy Tunis

POSTED

about 13 hours ago

DEADLINE

in 9 days

AI Contract Overview

The contract titled Electrical Installation and Wiring Services is a subcontract issued by the Michigan agency DTMB for the installation of comprehensive electrical systems in commercial and infrastructure projects. It encompasses the full scope of electrical work including wiring, conduits, lighting systems, and power distribution infrastructure, with performance required across various locations without a specified central city or state. The solicitation was posted on July 17, 2026, and responses are due by July 22, 2026, with a North American Industry Classification System code of 238210 indicating it falls under electrical contractors and other wiring installation services. There is no set-aside designation specified for small businesses or other categories, and the contract does not include a designated point of contact or detailed office address. Interested parties must submit their proposals through the provided Michigan state portal link prior to the deadline.