Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Ceiling-Mounted Patient Lift System

Active

Federal

Response Deadline08/05/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the structural reinforcement and installation of a ceiling-mounted patient lift system within a radiology suite, aimed at enhancing patient mobility and safety during medical procedures. Work scope includes necessary modifications to support the weight and operational demands of the lift system, ensuring compliance with medical facility standards and accessibility requirements. The installation must integrate seamlessly with existing infrastructure while maintaining a sterile and functional environment conducive to radiological operations. This is a subcontract classified as a Service-Disabled Veteran-Owned Small Business Set Aside, with the NAICS code 238210 indicating commercial and institutional building construction. The opportunity was posted on July 22, 2026, with a response deadline of August 5, 2026. Performance is designated to take place in Jackson, Mississippi, 39216, under the purview of the Department of Veterans Affairs through the 256-NETWORK Contract Office 16. The set-aside status prioritizes award to qualifying service-disabled veteran-owned small businesses, and all proposers must meet the associated eligibility and compliance criteria for this designation.

General Info

Service-disabled veteran-owned business to install patient lift system in Jackson, MS radiology suite under VA contract.

Agency

Department Of Veterans Affairs → 256-NETWORK Contract Office 16 (36C256)View Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

Jackson, MS, 39216, USA

Set-Aside

SDVOSBC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineAug 5

Submission deadline

Response Deadline

08/05/2026, 07:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → 256-NETWORK Contract Office 16 (36C256)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Veterans Affairs → 256-NETWORK Contract Office 16 (36C256)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Structural reinforcement and installation of ceiling-mounted patient lift system in radiology suite for patient mobility and safety.

Similar Contracts

Same NAICS industry code

Elevator Lobby 2 Way CommunicationsThe contract involves the installation of 23 new two-way communication boxes in elevator lobbies across the terminal, including 17 primary elevators, 3 service elevators, and 3 ramp landing elevators. The work is part of a broader effort to enhance emergency communication systems in airport elevator environments, ensuring compliance with safety and accessibility standards. The project is managed by the Aviation Project Management Group under the Port of Seattle, with primary point of contact Angela Peterson and Project Manager Christina Burdett available for inquiries. The solicitation was posted on July 22, 2026, and is classified under NAICS code 238210 for electrical contractors, indicating that qualified electrical or communications installation firms are expected to bid. The physical location of the work is at the Port of Seattle’s facility, though exact address details are not provided. The contract is currently in forecast status, indicating it is a planned future opportunity rather than an active solicitation, allowing potential vendors time to prepare submissions.

Aviation Project Management Group

POSTED

about 7 hours ago

DEADLINE

Variable Frequency Drives (VFD) Replacement Phase 3 (DBB)The contract entails the complete removal and replacement of 125 aging Robicon variable frequency drives with new, modern equipment to ensure reliable and efficient operation. The project requires the integration of these new VFDs into the Port’s Direct Digital Controller system to enable comprehensive monitoring of energy consumption, real-time output control readings, and system efficiency analytics. All necessary wiring, installation, testing, and commissioning activities must be completed to deliver a fully functional and seamlessly connected system. The work is part of Phase 3 of a multi-phase initiative under the Aviation Facilities & Infrastructure division of the Port of Seattle, with performance expected to occur within the Port’s operational facilities. Primary point of contact for inquiries is Yanet Maldonado, with Sharon Miick serving as the project manager, and all communications should be directed through their provided contact details.

Aviation Facilities & Infrastructure

POSTED

about 7 hours ago

DEADLINE

Operational Security Cameras Bagwell and North Cargo AreasThe contract entails the design, permitting, and construction of a new camera system to enhance security and operational oversight across the Bagwell and North Cargo Operations areas of the Port of Seattle. Approximately 50 high-resolution cameras will be installed at 43 distinct locations to replace and expand upon existing surveillance infrastructure, which currently focuses narrowly on conveyor systems and security doors. The upgrade aims to significantly improve forensic investigation capabilities and support enforcement of the Port’s movement rules and regulations by providing clearer, more comprehensive visual coverage of critical transit zones, including main drive lanes and entrances. In the Bagwell area, camera placement will be optimized to monitor vehicle flow and access points with greater precision, while in the North Cargo area, flexible pan-tilt-zoom units will be deployed to deliver dynamic, user-controllable surveillance across large surface areas, bridging gaps in current coverage. The project is managed by the Aviation Project Management Group under the Port of Seattle and is classified under NAICS code 238210 for special trade contractors. Point of contact for inquiries includes Angela Peterson as the Port Contact and Randa Williams as the Project Manager, with all work expected to be performed on-site at the Port facilities.

Aviation Project Management Group

POSTED

about 7 hours ago

DEADLINE

Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement (Re-bid)The Port of Seattle’s Aviation Project Management Group is soliciting bids to replace the existing aqueous film-forming foam (AFFF) fire suppression system at the Rental Car Facility located in SeaTac, which contains per- and polyfluoroalkyl substances (PFAS). The project requires complete removal of the contaminated foam system components and associated hazardous materials, followed by the design and installation of a new full dry chemical fire suppression system. This includes new storage tanks, valves, pumps, sprinkler lines, sprinkler heads, and reserve tanks, all of which must be integrated with the facility’s existing fire alarm system to ensure full operational compatibility and compliance with fire safety standards. The work is classified under NAICS code 238210 and is being pursued as a quick turnaround initiative to address environmental and regulatory concerns associated with PFAS contamination. The solicitation, titled Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement (Re-bid), was posted on July 22, 2026, and is being managed by the Port of Seattle. Primary point of contact is Todd Rehm, reachable at 206-787-5747 or rehm.t@portseattle.org, with Pat Nakamura serving as the project manager. All work must be performed on site at 3150 S 160th, SeaTac, and bidders are expected to demonstrate experience in hazardous material abatement, dry chemical system installation, and coordination with fire alarm systems. The project represents a critical infrastructure upgrade to ensure safety while eliminating environmentally harmful substances.

Aviation Project Management Group

POSTED

about 7 hours ago

DEADLINE

Parking Garage UPSThe contract involves the demo and replacement of the existing uninterruptible power supply system in a parking garage, ensuring continuous backup power for ticketing kiosks and associated access gates. The scope includes the installation of new UPS equipment, along with supporting components such as subpanels, electrical feeders, disconnects, and breakers, to modernize and enhance system reliability. The new UPS system will feature integrated data connections to enable remote alarm monitoring and real-time status reporting, improving operational oversight and maintenance responsiveness. The project is managed by the Aviation Project Management Group under the Port of Seattle, with primary point of contact Yanet Maldonado and project manager JJ Jordan available for inquiries. This forecasted solicitation, posted in July 2026, is classified under NAICS code 238210, indicating it falls within electrical contracting services. The work will be performed at the parking garage location managed by the Port, though specific address details are not provided. All equipment and installations must meet current electrical standards and support seamless integration with existing garage systems.

Aviation Project Management Group

POSTED

about 7 hours ago

DEADLINE

Electrical Unit Price Portwide 2026The contract outlines the scope of electrical work to be performed across multiple Port of Seattle facilities including Seattle-Tacoma International Airport, Maritime Properties, and surrounding areas. It encompasses the full range of electrical installations such as raceways, wiring, medium voltage cabling, boxes, transformers, electrical devices, temporary power and lighting systems, testing, and grounding, all executed in strict compliance with local and national code-enforcing regulations. The Contractor is responsible for providing all labor, tools, equipment, materials, and incidental resources required to complete the work, with tasks initiated and directed through official Work Authorizations issued by the Port of Seattle. All labor must be performed by personnel classified according to the Schedule of Unit Prices, ensuring standardized compensation and skill-level alignment. The contract is designated under NAICS code 238210 and is forecasted for performance beginning in 2026 under the title Electrical Unit Price Portwide 2026. Primary point of contact is Heather Bowden, with Lesley Miles serving as Project Manager, both reachable through official Port of Seattle channels. The work is not tied to a single location but spans the Port’s extensive operational footprint, requiring flexibility and coordination across various sites. No solicitation number has been issued yet, indicating this is a pre-solicitation forecast to prepare potential vendors for upcoming procurement.

Port Construction Services

POSTED

about 7 hours ago

DEADLINE

27-05-DPS On Call Electrical ServiceThe contract titled 27-05-DPS On Call Electrical Service is a solicitation issued by the Massachusetts agency COSPD - Purchasing for on-call electrical services. The solicitation, identified by number BD-27-1165-COSPD-COS01-131616, was posted on July 22, 2026, with a response deadline of August 6, 2026, at 4:00 PM. The services are required to support operations at the agency’s location on Washington Street in Salem, Massachusetts, with a ZIP code of 01970. The point of contact for this solicitation is Anthony Delaney, designated as the Purchaser. The contract type is aimed at securing a vendor capable of providing timely and reliable electrical services as needed, though specific scope details such as NAICS code or set-aside status are not provided. Interested parties must submit responses through the designated online portal linked in the solicitation.

COSPD - Purchasing

POSTED

about 10 hours ago

DEADLINE

Intercom replacementThe contract involves replacing all existing call and push button intercom systems across 667 residential units in 07 buildings located at Brady Drive in Framingham, Massachusetts. All entrance doors will be secured with locking mechanisms as part of the upgrade, and the project requires complete removal of the current intercom hardware with installation of new, modernized systems. Bidding is exclusively electronic through biddocs.com, and hard copy submissions will not be accepted; interested parties must register as electronic bidders following the detailed instructions provided in the bid documents. Proposals must be submitted by the deadline of August 12, 2026, at 8:00 PM EST. The solicitation is issued by the FHA01 - Framingham Housing agency under the Massachusetts state agency, with Kristin Davis listed as the primary point of contact for procurement inquiries. The place of performance is identical to the agency’s office address in Framingham, MA, and no set-aside or NAICS code details are specified.

FHA01 - Framingham Housing

POSTED

about 11 hours ago

DEADLINE

Electrical Conduit and Instrument WiringThis contract requires the installation of electrical conduits, junction boxes, and wiring to support the instrument air system’s controls, sensors, and monitoring devices. The scope includes full termination of all electrical connections, proper labeling of components for identification and maintenance, and comprehensive continuity testing to ensure system integrity and operational reliability. All work must be performed to meet industry standards for safety, durability, and performance in an industrial environment. The contract is structured as a subcontract under NAICS code 238210, which classifies the work as electrical contracting services, and is issued by Philadelphia Gas Works in Pennsylvania. The solicitation was posted on July 22, 2026, with responses due by August 14, 2026, at 6:00 PM, and the place of performance is not specified beyond the state location. No set-aside provisions are indicated, and the contract is open to qualified subcontractors meeting the technical and operational requirements outlined in the solicitation.

Philadelphia Gas Works

POSTED

about 12 hours ago

DEADLINE

Electrical & Fire Alarm System UpgradesThe contract seeks to upgrade electrical systems to support new medical equipment and integrate enhanced fire alarm and security systems at a facility in Jackson, Mississippi, with a zip code of 39216. The work is scoped under NAICS code 238210, identifying it as an electrical contracting project, and is designated as a Service-Disabled Veteran-Owned Small Business Set Aside, meaning only eligible businesses owned by service-disabled veterans may bid. The solicitation was posted on July 22, 2026, with responses due by August 5, 2026, at 7:00 PM. It is structured as a subcontract and falls under the jurisdiction of the Department of Veterans Affairs, specifically managed by the 256-NETWORK Contract Office 16 (36C256). The project aims to modernize critical infrastructure to ensure compliance with safety standards and accommodate advanced medical technology, requiring specialized expertise in both electrical and life safety system integrations.

256-NETWORK Contract Office 16 (36C256)

POSTED

about 12 hours ago

DEADLINE

American Embassy Tunis / INL - Secure Remote Court Installation and ConfigurationThe U.S. Embassy in Tunis, Tunisia, through the Department of State, is soliciting proposals for the installation and configuration of Cisco equipment to implement a national Cisco Meeting Server (CMS) videoconferencing solution for the Tunisian Ministry of Justice, enabling remote court hearings across 32 sites including twelve courts, eighteen prisons, one juvenile rehabilitation center, and the Ministry’s data center. The contract is a firm fixed-price award to be given to the lowest-priced technically acceptable and responsible offeror, with no discussions anticipated after initial submissions. All offerors must be registered in the System for Award Management (SAM) and provide proof of their Unique Entity Identifier (UEI), along with a completed IRS Form W-14 to comply with tax regulations. The scope of work, detailed in Attachment A, includes full integration, commissioning, testing, training, skills transfer, and three years of contractual maintenance, with performance must meet a strict standard of no more than one customer complaint per month. Equipment specified includes 68 Samsung 65-inch TVs, 24 Cisco Webex Room Kit Plus units, 20 Cisco Webex Room Kit units, 68 wall mounts, and a dedicated server for the data center, all to be delivered FOB destination in Tunis, with pricing required in Tunisian Dinars and VAT explicitly excluded due to U.S. Embassy tax exemptions. The contract has a 90-day performance period from award date, with a potential optional extension not exceeding six months total. Offerors must designate a Project Manager with at least ten years of video experience and proficiency in English and submit full compliance documentation including SF-1449 completed with required blocks, Section 5 representations, and all requested certifications. The proposal submission deadline has been extended to July 31, 2026, at 4:00 PM Tunis Time (UTC+1), and must be submitted electronically in English to specified State Department email addresses in MS-Word, Excel, or PDF format, with individual files not exceeding 30 MB. Payment will be made upon acceptance of deliverables based on the firm fixed-price terms, with invoices sent to tunisvoucherexaminers@state.gov and must include all elements required by FAR 32.905(e). A Contracting Officer’s Representative will be designated at award to oversee performance, document complaints, and ensure compliance with quality standards. Contractors must also disclose any telecommunications equipment manufacturers or distributors per U.S. federal restrictions and are subject to a

US Embassy Tunis

POSTED

about 12 hours ago

DEADLINE

MOF Cranberry Mt. Nature Center Generator ReplacementThe contract involves the replacement of an existing standby generator and transfer switch at the Cranberry Mountain Nature Center in Hillsboro, West Virginia, with a new 30kw propane-powered standby generator and a 200-amp automatic transfer switch, including the removal and disposal of the old equipment. This is a combined synopsis and solicitation issued as a Request for Quotation under FAR Part 12, meaning no separate written solicitation will be issued, and all responses must be submitted by the deadline of August 5, 2026. The acquisition is exclusively set aside for small businesses, with the North American Industry Classification System code 238210 and a size standard of $19 million in annual revenue, ensuring only qualified small business concerns may respond. The contracting office is the Monongahela National Forest, under the U.S. Department of Agriculture, located in Elkins, West Virginia, with Michael Simpson designated as the primary point of contact for inquiries.

Monongahela National Forest

POSTED

about 12 hours ago

DEADLINE

More opportunities from Department Of Veterans Affairs → 256-NETWORK Contract Office 16 (36C256)

Same awarding agency

General Construction & Project ManagementThis contract involves prime-level management of all subcontractors for general construction and project management services, requiring strict oversight of scheduling, quality control, and full compliance with the Veterans Affairs Acquisition Regulation, Federal Acquisition Regulation, and Buy American Act requirements. The work is performance-based and centered on delivering construction projects to federal standards under the supervision of the Department of Veterans Affairs, with the primary place of performance located in Jackson, Mississippi, zip code 39216. The opportunity is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, with the NAICS code 236220 identifying it as commercial and institutional building construction. The solicitation was posted on July 22, 2026, and responses must be submitted by August 5, 2026, at 7:00 PM Eastern Time. The contracting office, identified as 256-NETWORK Contract Office 16 (36C256), is responsible for managing the award and ensuring adherence to all regulatory and procedural obligations under the Department of Veterans Affairs procurement framework.

Commercial and Institutional Building Construction

POSTED

about 12 hours ago

DEADLINE

Radiology Shielding Design & EngineeringThe contract pertains to the engineering design of radiation shielding for a CT Simulator suite, requiring detailed dose calculations, specification of shielding materials, and full compliance with applicable regulatory standards. The work involves technical expertise in radiological protection to ensure safe operation of medical imaging equipment, with deliverables focused on structural shielding solutions that meet or exceed safety benchmarks for healthcare facilities. The design must account for patient and staff exposure limits, equipment layout, and facility constraints to guarantee operational safety and regulatory adherence. This is a subcontract set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, under NAICS code 541330 for architectural, engineering, and related services. The opportunity was posted on July 22, 2026, with a response deadline of August 5, 2026, and performance is to be conducted at a facility in Jackson, Mississippi, with a zip code of 39216. The contracting office is the 256-NETWORK Contract Office 16 under the Department of Veterans Affairs, emphasizing the project’s connection to veteran healthcare infrastructure. While no point of contact is listed, the solicitation is accessible via the SAM.gov platform and requires qualified small businesses to submit proposals that demonstrate technical capability, compliance experience, and a clear plan for shielding integration in a clinical environment.

Engineering Services

POSTED

about 12 hours ago

DEADLINE

Medical Equipment Integration & CoordinationThe contract entails on-site coordination with the manufacturer of CT equipment to integrate a CT Simulator into a renovated facility, ensuring seamless compatibility with existing power, data, and physical infrastructure. This effort requires hands-on collaboration during installation to validate technical specifications, confirm spatial fit, and verify operational readiness within the designated environment. The work is strictly confined to the place of performance in Jackson, Mississippi, with all activities needing to meet the technical and safety standards required for medical imaging deployment. This is a Service-Disabled Veteran-Owned Small Business Set Aside subcontract governed under NAICS code 541330, targeted at qualifying small businesses owned by service-disabled veterans. The solicitation was posted on July 22, 2026, with responses due by August 5, 2026, and is managed by the Department of Veterans Affairs through the 256-NETWORK Contract Office 16. All performance obligations must be fulfilled in compliance with federal contracting requirements, and the contractor is expected to deliver full integration support without reliance on external vendors beyond the CT equipment manufacturer.

Engineering Services

POSTED

about 12 hours ago

DEADLINE

Liebert HVAC System InstallationThe contract is for the supply and installation of precision cooling HVAC systems, specifically Liebert or equivalent models, designed to meet the stringent environmental requirements of a CT Simulator room and IT/telecom rooms. This subcontract is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses and falls under the NAICS code 238220 for Plumbing, Heating, and Air-Conditioning Contractors. The work is to be performed at the facility located in Jackson, Mississippi with a zip code of 39216, and the systems must ensure stable temperature and humidity levels critical to the operation of sensitive medical and communication equipment. The solicitation was posted on July 22, 2026, with a mandatory response deadline of August 5, 2026, at 7:00 PM. The contract is managed by the Department of Veterans Affairs through the 256-NETWORK Contract Office 16, and all proposals must comply with the technical specifications and performance standards required for mission-critical environments.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 12 hours ago

DEADLINE

Medical Gas & Piping SystemsThe contract requires the installation of medical gas outlets, piping systems, and associated alarms in full compliance with NFPA 99 standards and Veterans Affairs specifications, ensuring the safety and operational integrity of medical gas delivery in healthcare facilities. The work is scoped for performance at a facility located in Jackson, Mississippi, with a zip code of 39216, and must be executed by a Service-Disabled Veteran-Owned Small Business as this is a designated SDVOSBC set-aside opportunity. The project involves not only the physical installation but also rigorous testing and documentation to verify system functionality and regulatory adherence. The solicitation was posted on July 22, 2026, with a response deadline of August 5, 2026, at 7:00 PM, and falls under NAICS code 238220 for Plumbing, Heating, and Air-Conditioning Contractors. This is a subcontract opportunity managed by the 256-NETWORK Contract Office 16 under the Department of Veterans Affairs. While specific point of contact details are not provided, interested parties must submit proposals through the official SAM.gov platform using the provided link, and all work must meet federal and VA-mandated quality, safety, and compliance benchmarks without deviation.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 12 hours ago

DEADLINE

Radiation Shielding InstallationThe contract requires the installation of radiation shielding components including lead-lined walls, barium concrete, and shielded doors for a CT Simulator suite, with all workMust strictly adhere to NCRP, VA, and applicable state regulatory standards to ensure safety and compliance. The project is scoped for a specific facility in Jackson, Mississippi, with a ZIP code of 39216, and must be executed by a Service-Disabled Veteran-Owned Small Business as designated under the SDVOSBC set-aside program. The work falls under NAICS code 238310 for building construction specialized trade contractors and is managed by the Department of Veterans Affairs through the 256-NETWORK Contract Office 16. The solicitation was posted on July 22, 2026, with responses due by August 5, 2026, at 7:00 PM local time. This is a subcontract opportunity, indicating the selected contractor will likely perform the shielding installation as part of a broader project. While the agency office address details are unspecified, the performance location is clearly defined, and compliance with federal and state radiation safety protocols is mandatory. The entire effort is aimed at enabling safe and effective operation of the CT Simulator within a VA healthcare setting, requiring precision, certified materials, and documented adherence to regulatory benchmarks.

Drywall and Insulation Contractors

POSTED

about 12 hours ago

DEADLINE

Structural Demolition & ReconstructionThe contract involves the full demolition of existing basement infrastructure and the subsequent structural reconstruction, with critical emphasis on load-bearing modifications and reinforcement specifically designed to accommodate radiation shielding requirements. This work necessitates specialized engineering expertise to ensure structural integrity while integrating shielding materials that meet stringent safety and regulatory standards. The project is classified as a subcontract under the Service-Disabled Veteran-Owned Small Business Set Aside, indicating it is reserved for small businesses owned and controlled by service-disabled veterans. The NAICS code 238110 signifies structural contracting, aligning the scope with foundational and load-supporting construction activities. The solicitation was posted on July 22, 2026, with a response deadline of August 5, 2026, and the place of performance is identified as Jackson, Mississippi, with a zip code of 39216. The contracting agency is the Department of Veterans Affairs, specifically the 256-NETWORK Contract Office 16, which manages this procurement under its operational purview. No point of contact is listed, and while the office address details are incomplete, the physical work must be executed at the designated location in Jackson. Completion of this project requires adherence to precise structural and radiological guidelines, making it a high-stakes, technically demanding undertaking.

Poured Concrete Foundation and Structure Contractors

POSTED

about 12 hours ago

DEADLINE

AMENDMENT 0001 | SOLICITATION | Y1DZ | DESIGN -BUILD | 36C25626R0072 | 586-26-100 | RENOVATE RADIATION ONCOLOGY DEPARTMENTThis solicitation, amended as 0001, is a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside for the renovation of the Radiation Oncology Department at the G.V. Sonny Montgomery VA Medical Center in Jackson, Mississippi, under contract number 36C25626R0072. The project requires a full design-build renovation of approximately 13,508 square feet of basement space, including demolition, reconstruction, and installation of critical medical infrastructure such as a new CT Simulator suite, specialized radiation shielding, Liebert HVAC systems, upgraded electrical and medical gas systems, a ceiling-mounted patient lift, and enhanced telecommunications, security, and fire alarm systems. The contractor must coordinate directly with the CT equipment manufacturer and adhere strictly to VA Design Guides, VA Master Specifications, and applicable codes including IBC, NFPA, OSHA, EPA, and Mississippi environmental regulations. The contract is firm-fixed-price with a 365-day performance period from Notice to Proceed and requires a 120-day proposal acceptance period. A bid bond is mandatory with submission, and performance and payment bonds are required upon award. The NAICS code is 236220 with a small business size standard of $45 million in average annual receipts, and all offerors must be certified in SBA VetCert, registered in SAM.gov, and have completed all required representations and certifications prior to the due date. The amendment extends the offer receipt deadline to August 5, 2026, and includes clarifications and responses to RFI#58 regarding asbestos surveillance. The solicitation follows a two-phase evaluation process under a best-value trade-off framework, prioritizing technical approach, qualifications of key personnel, and past performance in Phase I, followed by a balanced assessment of technical design concept, draft schedule, and price in Phase II. Proposals must be submitted electronically via email in two separate volumes, each limited to 30 pages, using searchable PDF format with Arial 11-point font and standard margins. All documents must be labeled with the solicitation number and the offeror’s details, and submissions must not exceed 5 MB per email. The contract includes mandatory clauses such as 52.219-14 on limitations on subcontracting, 52.228-1 on bid guarantee, 52.249-2 on termination for convenience, and 52.246-12 on

Commercial and Institutional Building Construction

POSTED

about 12 hours ago

DEADLINE

6515--Purchase, Delivery, and Installation of Drying Cabinets (Brand Name or Equal) at Central Arkansas VA Healthcare System (CAVHS)The Department of Veterans Affairs, through Network Contracting Office 16, is seeking qualified Service Disabled Veteran Owned Small Businesses (SDVOSBs) to submit quotes for the purchase, delivery, and installation of two drying cabinets at the Central Arkansas Veterans Healthcare System in Little Rock, Arkansas. The requirement is for AMSCO Drying Cabinets, specifically the model with Air Purge Connector for DaVinci Devices, large shelves, 29-inch width, cabinet configuration with purge option, and 120V power, though equal alternatives are permitted. The contract will be awarded on a firm-fixed-price basis, and all respondents must be actively registered in the System for Award Management (SAM) and certified with the Small Business Administration as an SDVOSB to be eligible for award. The offeror is responsible for providing all labor, tools, materials, equipment, transportation, and supervision necessary to complete the installation at the John L. McClellan Memorial Veterans Hospital, 4300 West 7th Street, Little Rock, AR 72205. Proposals must be submitted via email to T Miller, Contracting Specialist, at t.miller@va.gov with the subject line “Quote - 36C25626Q1102 Drying Cabinets” no later than 3:00 PM on Friday, July 31, 2026.

Surgical Appliance and Supplies Manufacturing

POSTED

about 12 hours ago

DEADLINE

6530--Ultrasound Tables - FAYThe solicitation pertains to the procurement of ultrasound tables under contract number 6530, with the official solicitation number 36C25626Q0820, issued by the Department of Veterans Affairs through the 256-NETWORK Contract Office 16 in Ridgeland, Mississippi. This is a Service-Disabled Veteran-Owned Small Business Set Aside, meaning only eligible SDVOSBs may compete, and the NAICS code 339113 classifies the purchase under the manufacturing of medical and dental equipment. The response deadline is July 31, 2026, at 3:00 PM ET, and the point of contact for inquiries is Michelle D. Atwell, Contract Specialist, reachable via email or phone provided in the contract data. The amendment clarifies that for the nonmanufacturer rule, an SBA waiver is not required as long as the ultrasound table is manufactured by a small business, ensuring compliance with the SDVOSB eligibility criteria without needing an individual waiver. Additionally, the technical submission instructions now reference the Biodex Model 058-710 ultrasound tables or an equivalent model, updating the prior documentation. All other terms, conditions, and requirements of the original solicitation remain in full effect without modification, and the procurement continues to be issued as a combined solicitation for both competitive and noncompetitive award consideration.

Surgical Appliance and Supplies Manufacturing

POSTED

about 12 hours ago

DEADLINE

6515 - Sun Nuclear Daily QA 4 ProThe Department of Veterans Affairs, Veterans Health Administration, Network Contracting Office 16, intends to award a sole-source, firm-fixed-price contract to Sun Nuclear Corporation for the purchase and one-time delivery of the Daily QA 4 Pro Checker, a specialized medical quality-assurance device for the G.V. (Sonny) Montgomery VA Medical Center in Jackson, Mississippi. This action is justified under FAR 12.102(a) due to the unique, proprietary nature of the device, which integrates dosimetry, imaging, and positioning verification into a single automated platform not available from any other manufacturer. Sun Nuclear is the sole original equipment manufacturer with the exclusive capability to provide a system featuring a high-density detector array with four vented ion chambers, 225 unattenuated diodes, and 24 attenuated diodes, enabling comprehensive beam analysis and workflow efficiency that no competing product can replicate. The system’s integrated SunCHECK v6.0+ software further ensures full automation, centralized documentation, and enterprise-level quality assurance management. The procurement is classified under NAICS code 334519 and PSC 6515, with a small business size standard of 600 employees. While this notice does not constitute a solicitation or request for competitive proposals, any vendor claiming the ability to supply the identical Sun Nuclear device must submit a written statement of interest within seven calendar days, accompanied by an authorized OEM letter proving legal authorization to distribute, install, and support the product. Responses must be emailed exclusively to Contract Specialist Gary Frank and must include business size classification, ownership details, and proper proprietary data markings. No costs incurred in responding will be reimbursed, and the government retains full discretion to proceed with a sole-source award if no valid alternative submissions are received by the deadline of 7:00 PM Central Standard Time on July 29, 2026. Failure to provide verifiable OEM authorization will result in disqualification.

Other Measuring and Controlling Device Manufacturing

POSTED

about 12 hours ago

DEADLINE