Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Government of Canada was posted on May 29, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Electrical Installation and Wiring Services

Closed
International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238210
New
MAIN GROUNDING ELECTRODE
Solicitation # WL-26-006
The Woodland Job Corps Center, operated by Adams and Associates, Inc. for the U.S. Department of Labor, is soliciting a licensed electrical contractor to inspect and repair grounding systems across multiple campus buildings in Laurel, Maryland. The scope of work, identified as WL-26-006, includes the Aspen Dorm, Vocational Building, Willow Hall, Holly Dorm, Maple Dorm, and Oak Dorm, as well as necessary corrections to the Administration Building. All work must comply with NEC 2023, 250 standards, as well as EPA, OSHA, and Maryland state regulations. Technical requirements include the installation of #2/0 awg conductors, 16x2 inch ground bars, 8-foot ground rods with 6-foot separation, and the use of 3/4 inch EMT conduit for routing. This is a single lump sum contract with proposals due by September 3, 2026. Award decisions will be based on best value, weighted by price (60%), quality (20%), past performance (10%), and schedule (10%). Bidders must provide a detailed cost breakdown, a valid Maryland contractor's license, and proof of comprehensive insurance, including general liability of at least 1 million dollars per occurrence. The contractor must start work within 14 days of the Notice to Proceed and provide a one-year workmanship guarantee. Final payment is contingent upon the submission of a completed SF 1413, release of liens, and the successful completion of a final acceptance inspection. This opportunity is set aside for various small business categories, including SDB, WOSB, HUBZone, and VOSB.
Adams & Associates\ Woodland Job Corps Center

POSTED

about 21 hours ago

DEADLINE

in 6 days
NAICS: 238210
New
PANELBOARDS
Solicitation # WL – 26 -0004
This solicitation, identified as WL-26-0004, is for a single lump sum contract to perform electrical panelboard repairs and labeling at the Woodland Job Corps Center in Laurel, Maryland, operated by Adams and Associates for the U.S. Department of Labor. The scope of work requires the provision of non-handwritten circuit directories for buildings E, F, G, K, and M, the reinstallation of a panelboard cover in the welcome center mechanical room, and specific fire alarm control panel identification at the Oak Dormitory, including UL listed red mark labels and updated panel schedules. All work must comply with NEC 2023, OSHA, EPA, and Maryland state regulations. The performance period is scheduled from May 11, 2026, through December 31, 2026. Proposals are due by September 3, 2026, and must be submitted on company letterhead including a detailed cost breakdown, a timeline for substantial completion, and proof of a valid Maryland contractor's license. Attendance at the mandatory bid conference is required for consideration. Award will be based on best value, weighing technical quality and price. The contractor must provide comprehensive insurance coverage, including general liability of at least 1 million dollars per occurrence, and guarantee all workmanship for one year. Final payment is contingent upon the submission of certified payroll records, a completed SF 1413, and the release of liens from all subcontractors and suppliers.
Adams & Associates\ Woodland Job Corps Center

POSTED

about 21 hours ago

DEADLINE

in 6 days
NAICS: 238210
New
Wind River Job Corps: LAWN EQUIPMENT STORAGE ROOM VENTILATION
Solicitation # wind-river-job-corps-lawn-equipment-storage-room-ventilation
EQUUS Workforce Solutions, operating the Wind River Job Corps Center in Riverton, Wyoming, is seeking bids for a subcontracting opportunity to remediate a life safety deficiency in a lawn equipment storage room. The project involves installing mechanical ventilation to mitigate dangerous fuel vapor accumulation. The scope of work includes creating an 18-inch by 18-inch rough opening in an exterior concrete block wall, installing one wall-mounted explosion-proof exhaust fan capable of approximately 600 CFM, and installing two 18-inch by 24-inch door-mounted ventilation louvers. Electrical requirements include providing approximately 90 linear feet of conduit and wiring for a 208 volt, 1 phase, 1/3 HP motor designed for continuous operation. All electrical work must adhere to the National Electrical Code, and contractors must follow Lockout/Tagout procedures. This is a fee-for-service solicitation open to small businesses, including SDB, WOSB, HUBZone, VOSB, and SDVOSB entities, under NAICS code 238210. Bids are due by September 2, 2026, and must include a bid sheet, W-9, vendor self-certification, and signed terms and conditions. Award will be based on best value. The contract is subject to the Service Contract Act, requiring compliance with Wage Determination No. 2015-5407 for Wyoming. Key federal regulations are incorporated via FAR clauses, including those regarding the Combating Trafficking in Persons, the Copeland Act for contracts over 2,000 dollars, and specific insurance requirements for work on government installations. Final acceptance requires the storage area to be cleaned of all debris and returned to a fully operational state.
EQUUS Workforce Solutions operator of the Wind River Job Corps

POSTED

about 21 hours ago

DEADLINE

in 5 days

AI Contract Overview

Show more

The contract pertains to the installation of electrical systems for a construction project under the Government of Canada, specifically managed by the Department of National Defence. It encompasses the full scope of electrical work including wiring, conduits, lighting, and power distribution, all to be performed at the site in Oromocto, New Brunswick. This is classified as a subcontract opportunity with a North American Industry Classification System code of 238210, indicating it is tied to electrical contracting services. The solicitation was posted on May 29, 2026, with a deadline for responses set for June 9, 2026, at 6:00 p.m., allowing vendors to submit proposals for the scope of work. No set-aside provisions or detailed point of contact information are provided, and the contract is open for participation under standard federal procurement protocols for subcontractors.

General Info

Electrical system installation subcontract in Oromocto, NB for Department of National Defence, Canada.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

New Brunswick, Oromocto, CAN

Set-Aside

NONE

Documents

This scope was carved out of W2037-27-0419/A.

The full solicitation package (7 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CTC Workplace Furniture

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Department of National Defence
ContactsNo contacts available
OfficeN/A
Organization / Agency
Government of Canada → Department of National Defence
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Installation of electrical systems including wiring, conduits, lighting, and power distribution for the construction project.

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

NAICS: 541513
New
International
TBIPS - Implementation and Deployment of Cloud Analytics Solutions
Solicitation # W6369-24-P5PN
The Directorate Joint Defence Cloud Program (DJDCP) under the Department of National Defence is seeking informatics professional services to support the implementation, deployment, and ongoing operational management of cloud analytics solutions across public cloud environments including GCP and AWS. The contract, identified by solicitation number W6369-24-P5PN, is structured as an Indefinite Delivery Indefinite Quantity (IDIQ) arrangement delivered through Task Authorizations, enabling flexible, on-demand execution of cloud modernization activities such as infrastructure-as-code provisioning, application migration, network configuration, security engineering, and system integration. Work will occur primarily within the National Capital Region, with performance locations determined per task and restricted from Comprehensive Land Claims Agreement territories. Offerors must demonstrate proven experience in cloud adoption, enterprise cloud analytics, and public cloud initiatives, with technical merit accounting for 90% of the award decision and price for 10%, evaluated on a trade-off basis with a minimum 120 out of 150 technical points required for eligibility. All proposed personnel must hold SECRET-level security clearances, possess verified technical qualifications and English language proficiency, and be fully available during contract performance, with strict prohibitions against storing classified or protected information on contractor systems. Contractors are required to submit comprehensive documentation including architecture diagrams, test plans, SOPs, and migration assessments in editable Microsoft Office formats and must comply with all DND/CAF security protocols, ITIL-based service management processes, and the Contract Security Manual. Mandatory certifications include Employment Equity compliance under the Federal Contractors Program, accurate representation of personnel qualifications and availability, full disclosure of resource allocation across multiple contracts, and independent bid determination. Bids must be submitted in three separately bound volumes—technical, financial, and certifications—via email or postal delivery by the specified deadline, using only approved file formats and environmentally responsible paper standards. The contract has no set term extension mechanisms and carries a two-year duration, with no explicit ceiling value established due to the task-based nature of delivery and incomplete pricing schedules provided for evaluation purposes only.
Computer Facilities Management Services

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 236118
New
International
The Replacement of Patio Slabs (HSC) Trenton
Solicitation # AB3725-00016
The Department of National Defence, through the Canadian Forces Housing Agency, is soliciting offers for the replacement of 25 patio slabs at Residential Housing Units located at HSC Trenton, 8 Wing Trenton, Ontario. The scope of work involves the complete removal and disposal of existing precast patio stones and granular base materials, followed by the construction of twenty-five 10 ft. by 12 ft. cast-in-place concrete patios. All construction must adhere to the National Building Code of Canada 2025 and CSA A23.1 and A23.2 standards for concrete materials and methods. The contract is governed by the Canada-Korea Free Trade Agreement and requires the contractor to restore all affected surrounding areas to their original condition. The contract period is fixed from the date of award until October 31, 2026. Award will be based on the Lowest Evaluated Price Technically Acceptable (LPTA) methodology, provided the offer is compliant with all solicitation requirements. There are no security clearance requirements for this project. Proposals must be submitted electronically via the Government Electronic Tendering Service by August 31, 2026, and must include a financial offer along with the required submission and declaration forms. The Government of Canada retains the exclusive right to inspect and accept all work performed at the destination site.
Residential Remodelers

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 333994
New
International
Two (2) quantities of Ballistic Plasticine Oven
Solicitation # W8486-270930/A
The Department of National Defence is seeking two Ballistic Plasticine Ovens under Supply Arrangement E60PV-19EQUI, which is reserved exclusively for pre-qualified suppliers of laboratory and scientific equipment, parts, accessories, services, and supplies. Bids are only accepted from vendors already holding this supply arrangement, and any proposals from non-qualified suppliers will not be evaluated. The procurement follows a lowest priced responsive proposal strategy under the Canadian Free Trade Agreement and the Canada–Korea Free Trade Agreement, with the solicitation published on CanadaBuys (SAP Ariba) for 40 calendar days and open for bids for a minimum of 15 calendar days. The equipment must be delivered to Edifice 239, local 107, 2459 route de la Bravoure (COTÉ SUD), Québec, QC, G3J 1X5 within eight weeks of contract award. The technical specifications are mandatory and comprehensive: the oven must operate on a 208V to 400V, 3-phase, 50/60 Hz power supply and not exceed dimensions of 1.3m width, 1.2m depth, and 1.8m height. It must maintain a working temperature range from ambient +10°C to at least 300°C, with temperature setpoint adjustments from +20°C to +300°C and resolution of ≤0.1°C below 100°C and ≤0.5°C at or above 100°C. The oven requires two independent Pt100 Class A or better temperature sensors in redundant configuration, an adaptive PID control system with adjustable heating distribution and airflow, and a feature that delays process timing until the setpoint is reached. Internal dimensions must provide a volume between 1000L and 1100L with internal width ≥1000mm, height ≥1100mm, and depth ≥800mm. The chamber must be constructed of corrosion-resistant stainless steel with all internal components made of similar material. It must include forced air circulation via at least two circulating units with adjustable airflow, programmable temperature profiles, over- and under-temperature safety protections, and a minimum chamber load capacity of 290 kg. Only suppliers meeting all technical criteria with the lowest aggregated price will be recommended for award.
Industrial Process Furnace and Oven Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 811121
New
International
MP Police Outfitting - Repair and Overhaul (R&O)
Solicitation # W8486-270799/A
The Department of National Defence requires a licensed contractor for the repair and overhaul of Military Police vehicles under solicitation W8486-270799/A. The scope of work includes installing policing equipment on new vehicles, decommissioning old vehicles by removing emergency, safety, and communications equipment, and providing ongoing repair and maintenance for installed systems. The contractor must provide qualified on-site labor, materials, and secure facilities for vehicle storage. The contract is for an initial term of three years with an option to extend for one additional year. Award is based on the lowest evaluated price among bidders who meet all mandatory technical criteria. Operational requirements specify that the contractor must maintain regionalized facilities across Western, Central, and Eastern Canada, with a preference for facilities in each province to reduce delivery timelines. Technical specifications mandate the use of the SET-GK07222UXLRCMP gun rack and the installation of CF-33 MDT docking stations, while the Whelen Edge 9X is an acceptable alternative to the discontinued Cenator lightbar. All work must be completed within a 90-day turnaround per vehicle and comply with ISO 9001:2015 quality standards. The contractor is required to maintain comprehensive insurance, including a minimum of 2 million dollars in CGL and 250,000 dollars in Bailee's Customer's Goods Insurance.
Automotive Body, Paint, and Interior Repair and Maintenance

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 336999
New
International
Air Rescue Fire Fighting Vehicle (ARFFV) 12000 L
Solicitation # W8476-267172/A
The Department of National Defence is procuring one Air Rescue Fire Fighting Vehicle (ARFFV) with a 12,000-liter capacity for delivery to Canadian Forces Base Cold Lake, with an optional second unit to be delivered to a Canadian location to be specified in the resulting contract amendment. The vehicle must comply with NFPA 1900 and NFPA 412 standards, utilize metric units for all labels and indicators, and be delivered in a complete, manufactured state with all systems and sub-systems installed. It must be cleaned, serviced, and adjusted for immediate use upon delivery, with all wood packaging conforming to ISPM 15 standards and all items marked with manufacturer and specification numbers, permanently etched or stamped for positive identification. Bilingual or internationally recognized symbols are mandatory for all identification, instructional, and warning labels, which must be within the operator’s view, and all controls and indicators must be permanently labeled. A vehicle information data plate meeting NFPA 1900 requirements must be permanently affixed in the cab. The vehicle must be delivered Delivered Duty Paid under Incoterms 2020, with a requested delivery timeline of 730 days after contract award, and the offeror must provide an initial parts kit, a list of serial numbers, dimensioned drawings in four views, and digital JPEG photos of the vehicle. Safety recalls and manufacturer technical service bulletins must be provided for at least ten years or the vehicle’s life expectancy. All offers must be submitted electronically to the designated email address by the closing date, and must include the Offer Submission Form, Offeror Declaration Form, and a Procurement Business Number. Proposals must be organized into four sections: Technical, Financial, Required Forms, and Additional Information. Offers failing to meet any mandatory technical requirement flagged with “must” will be deemed non-compliant, and award will be granted to the lowest compliant offer. The Contractor must comply with ISO 9001:2015 quality management requirements and is responsible for all inspections and tests to ensure conformity, retaining quality control records for three years after contract completion. Payment is subject to a 10% holdback on the first and second line items, and invoices must include detailed breakdowns of costs, serial numbers or NVIS with VIN, proof of training, release documents, shipping receipts, and bilingual Safety Data Sheets with NATO Stock Numbers. Applicable taxes must be listed separately with registration numbers, and Canada will pay those taxes but the Contractor is solely
All Other Transportation Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details