Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Subcontract opportunity from Department Of Homeland Security was posted on August 20, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Electrical Installation for Highway Lighting System

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238210
New
Inland Empire Job Corps-Request for Quote Electrical Repairs
Solicitation # Inland Empire Job Corps Electrical Repairs
Management & Training Corporation (MTC) is seeking quotations for a subcontracting opportunity to perform electrical and fire alarm repairs at the Inland Empire Job Corps Center in San Bernardino, California. Under NAICS code 238210, the selected contractor must provide all labor, materials, equipment, and permits to correct specific deficiencies. Key tasks include installing GFCI protection in the cafeteria, culinary arts kitchen, and academic education building; repairing open-ground conditions in the dormitory and medical areas; installing filler plates in panelboards; and updating circuit directories and labeling for various panelboards and feeder conductors. All work must comply with the National Electrical Code (NEC), NFPA standards, and applicable federal, state, and local regulations. This is a fee-for-service contract requiring a lump sum bid. Eligible respondents include small businesses and SBA-certified VOSB, SDVOSB, WOSB, and HUBZone entities. Applicants must submit a completed bid sheet, a supplier self-certification and set-up packet, three references, and proof of insurance, including general liability of at least $1,000,000 and worker's compensation with employer's liability of $500,000. The procurement is subject to Service Contract Labor Standards wage determinations for Riverside and San Bernardino counties. Additionally, contractors must adhere to strict federal guidelines regarding information security, the Buy American Act, and the disclosure of debarment status for subcontracts exceeding $45,000.
Inland Empire Job Corps

POSTED

about 1 hour ago

DEADLINE

in about 5 hours
NAICS: 238210
New
26-140 Installation of Emergency Shut Off Switches
Solicitation # 26-140
Solicitation 26-140 is a subcontracting opportunity with Atterbury Job Corps Center and Adams & Associates, Inc., operating for the U.S. Department of Labor. The project requires the installation of emergency shut-off switches on power tools within the Facility Maintenance Shop in Edinburgh, Indiana. Key technical deliverables include the installation of two mushroom-head push-button emergency shut-off switches and a new 60A, 208/120V, 3-phase, 4-wire, 6-circuit branch circuit panel with a 60A shunt-trip main circuit breaker. All work must comply with OSHA and EPA regulations, national building codes, and Indiana state laws, with Indiana regulations taking precedence if more stringent. The contractor is responsible for providing all training, operating and maintenance manuals, and a one-year guarantee of workmanship. This is a small business set-aside solicitation requiring a single lump sum bid. Award will be based on best value, evaluated through price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Mandatory requirements for bidders include attendance at the site pre-bid conference on November 10, 2026, and submission of proposals by November 20, 2026. Required documentation includes a completed SF 1413, Vendor Questionnaire, W9, proof of a valid Indiana Contractor's License, and certification of compliance with Davis Bacon Act wage rates. Selected contractors must maintain specific insurance coverages, including general liability of at least $1,000,000 per occurrence and automobile liability, naming both Adams and Associates, Inc. and Atterbury Job Corps Center as additional insureds. Payment terms are Net 30.
Atterbury Job Corps. – Adams & Associates

POSTED

about 1 hour ago

DEADLINE

in 7 days
NAICS: 238210
New
Transformer Oil Testing Services
Solicitation # RFP-VC-26-010
The Inland Empire Utilities Agency (IEUA) is soliciting proposals under RFP-VC-26-010 for professional transformer oil testing services to enhance the reliability, safety, and maintainability of its transformers. The scope of work is divided into three primary areas: conducting visual and infrared thermographic inspections on energized transformers under typical load, installing standardized external oil sampling devices to improve safety and access, and performing comprehensive oil testing analysis. Key deliverables include annotated infrared images, written condition assessment reports with severity classifications, on-site training for agency staff on defect identification, and the development of standard operating procedures. All work must adhere to NETA MTS standards, IEEE guidelines, NFPA 70E safety protocols, and ASTM D923 for sampling electrical insulating liquids. The agency intends to make a single award to the most capable offeror based on a variety of factors, including a proven track record of at least two similar projects within the last five years, personnel qualifications, proposed staffing methodology, and cost-effectiveness. Proposals must be submitted electronically via PlanetBids by December 23, 2026, at 3:00 pm. The resulting contract will utilize fixed pricing with a not-to-exceed total price and may include options for one-year extensions. Selected contractors must be registered with the Department of Industrial Relations for prevailing wage compliance and provide necessary insurance certifications and non-collusion statements. Payment will be processed electronically via ACH within 30 days of invoice approval, with early payment discounts available for reduced invoice amounts.
Inland Empire Utilities Agency

POSTED

about 1 hour ago

DEADLINE

in about 1 month
NAICS: 238210
New
Centennial JCC Emergency Lighting Replacement, Upgrade, Testing & Maintenance Services
Solicitation # centennial-jcc-emergency-lighting-replacement-upgrade-testing-maintenance-services
Management and Training Corporation is soliciting bids for a fixed-price, single lump sum contract to provide emergency lighting replacement, upgrade, testing, and maintenance services at the Centennial Job Corps Center in Nampa, Idaho. The project involves inspecting, testing, repairing, and certifying emergency lighting systems to ensure compliance with NFPA 101 (2024 Edition) and NFPA 70 standards. The selected electrical contractor will be responsible for inventorying all fixtures, performing functional power-outage simulations, applying durable tracking labels to fixtures, and integrating recurring maintenance into the facility's Computerized Maintenance Management System. The estimated contract value ranges between $25,000 and $100,000, with a performance period of 30 business days following the written Notice to Proceed. Bids are due by December 1, 2026, and must be submitted via email to Sandra Clore. A mandatory physical site visit and signature on the attendance roster are required prior to bid submission. For bids of $25,000 or more, a bid bond guarantee of 20% of the base bid is required, and the awarded contractor must provide performance and payment bonds from a surety company with at least an A- rating. Proposals must include a detailed cost breakout on company letterhead covering materials, labor, equipment, and overhead. This solicitation is open to various small business categories, including VOSB, SDVOSB, WOSB, and HUBZone concerns, and requires strict adherence to the Davis-Bacon Act, Federal Contractor Minimum Wage requirements, and OSHA safety regulations.
Management & Training Corporation/Centennial Job Corps Center

POSTED

about 1 hour ago

DEADLINE

in 19 days

AI Contract Overview

Show more

The Electrical Installation for Highway Lighting System is a subcontract opportunity issued by the Department of Homeland Security through the Aviation Logistics Center. The project involves the installation of electrical conduits, wiring, and lighting fixtures specifically located along the highway right-of-way. This work falls under NAICS code 238210, which pertains to electrical contracting. The solicitation was posted on August 20, 2026, with a response deadline of August 26, 2026. Interested parties must submit their responses by the specified cutoff to be considered for this electrical infrastructure project.

General Info

DHS subcontract for highway lighting electrical installation; responses due by August 26, 2026.

NAICS

238210 - Electrical Contractors and Other Wiring Installation Contractors

Place of Performance

NC

Set-Aside

NONE

Documents

This scope was carved out of 70Z03826QW0000095.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Repair Very Ultra High Frequency (V/UHF) Logic Control for U.S. Coast Guard Aircraft HC-27J

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Homeland Security → Aviation Logistics Center (ALC)(00038)
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Installation of electrical conduits, wiring, and lighting fixtures along highway right-of-way.

More opportunities from Department Of Homeland Security → Aviation Logistics Center (ALC)(00038)

Same awarding agency

NAICS: 334515
New
Federal
Aircraft Electrical Component Test Stand (AECTS)
Solicitation # 70Z03826QK0000014
Solicitation 70Z03826QK0000014 is a request for quotation for the Department of Homeland Security Aviation Logistics Center to procure and install a factory-new Aircraft Electrical Component Test Stand (AECTS). The project involves the disconnection and removal of the existing test stand and the delivery, installation, and commissioning of a turn-key system capable of supporting power generation components for H-65, MH-60T, HC-144, HC-27, C-130H, and C-130J aircraft platforms. The scope of work includes providing on-site training, extended warranty options, and comprehensive operator, calibration, and maintenance manuals. Performance will take place at the Aviation Logistics Center in Elizabeth City, North Carolina, with a required post-award kickoff site visit within ten calendar days of award. This is an unrestricted requirement under NAICS code 334515, and award will be made to the lowest priced, technically acceptable offeror. Technical acceptability is based on the ability to provide new equipment that meets all specified technical criteria and the requirement for offerors to maintain active registration in the Defense Logistics Agency Joint Certification Program. Quotations must be submitted by December 15, 2026, and should include pricing for the equipment, installation, training, and removal of the old system on a FOB Destination basis. Final acceptance is contingent upon a successful Acceptance Test Plan and the provision of an Equipment Operability Certification.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 6 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
Sheave
Solicitation # 70Z03827QJ0000006
Solicitation 70Z03827QJ0000006 is a Request for Quotation issued by the United States Coast Guard Aviation Logistics Center for the procurement of new MH-60T aircraft sheaves. This is a 100 percent Small Business Set-Aside under NAICS code 336413, with a small business size standard of 1,250 employees. The requirement is for a brand name item manufactured by Hornet Acquisitions Co. LLC (Part Number 42315-72, NSN 3020-01-HS1-0396). The initial award consists of nine units, with an optional quantity of ten additional units that the government may order unilaterally within 365 days of the award date. The requested delivery date is February 22, 2027, and the closing date for receipt of offers is November 13, 2026, at 2:00 PM EST. Award will be made to the lowest priced, technically acceptable offeror. Technical acceptability requires the ability to provide new manufactured commercial items with clear, documented traceability to the Original Equipment Manufacturer. Offerors must provide a Certificate of Conformance in accordance with FAR 52.246-15. The contract is a firm-fixed price purchase order with inspection and acceptance performed at the destination by USCG personnel. Packaging must be suitable for land, air, or sea shipment and must exclude materials such as styrofoam and shredded paper, ensuring protection against corrosion for at least one year of warehouse storage.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 336413
New
Federal
MH-65 Mech, Harness Assembly
Solicitation # 70Z03827QB0000019
Solicitation 70Z03827QB0000019 is a request for quotation issued by the Department of Homeland Security Aviation Logistics Center for the procurement of MH-65 helicopter spare parts, specifically Mechanical Harness Assemblies (NSN 1680-01-HS1-4515, Part Number 1673229-3). The government seeks a firm-fixed price purchase order for an initial quantity of five units, with a unilateral option to increase the quantity by up to 30 additional units within one calendar year of award. This is a brand-name restricted requirement specifying Mission Systems Davenport, Inc. (Cage Code 99251) as the original equipment manufacturer. All parts must be new, approved per Federal Aviation Administration guidelines, and accompanied by a Certificate of Conformance and a complete, auditable paper trail of traceability from the OEM to the government. The contract will be awarded to the lowest priced offeror rated as technically acceptable. Technical acceptability is based on the ability to provide exact part numbers from the OEM or an approved source. Deliverables are requested F.O.B. Destination to Elizabeth City, North Carolina, with a requested delivery date of January 25, 2027. Strict packaging and marking requirements are in place, prohibiting materials such as Styrofoam and peanut packaging, and requiring detailed internal and external labeling. Quotations must be submitted via email to the designated point of contact by November 13, 2026, at 10:00 am EST, and must include the completed requirements excel sheet.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in about 21 hours
View Details
NAICS: 336413
New
Federal
MH-65 SPARE PARTS
Solicitation # 70Z03827QB0000010
Solicitation 70Z03827QB0000010 is a request for quotation issued by the United States Coast Guard Aviation Logistics Center for the procurement of new manufactured commercial spare parts for the MH-65 helicopter, specifically the MGB Tach Bush (NSN 01HS31976). The requirement is intended as a sole source acquisition from Airbus Helicopters, Inc., as they are identified as the only source capable of providing genuine Original Equipment Manufacturer parts with the necessary traceability. The initial order is for 10 units, with a tailored option for the government to unilaterally increase the quantity by up to 20 additional units, for a maximum of 30, by December 31, 2026. Due to vendor requests, the offer due date has been extended to November 16, 2026, at 2:00 PM EST. To ensure aircrew safety and flight quality, the government mandates that all parts be new, FAA-approved, and accompanied by a Certificate of Conformance and a complete, auditable paper trail tracing ownership back to the OEM, Airbus Helicopters France. No substitute or alternate parts will be accepted. Award will be based on a determination of fair and reasonable pricing and technical acceptability. Deliveries are designated as F.o.B. Destination to the Aviation Logistics Center, with strict packaging requirements prohibiting materials such as Styrofoam and peanut packaging to prevent damage and corrosion during storage. Offerors must hold their quoted prices firm for 60 calendar days.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
Federal
Shipping and Storage
Solicitation # 70Z03827QJ0000022
Solicitation 70Z03827QJ0000022 is a request for quotation issued by the USCG Aviation Logistics Center for the procurement of Shipping and Storage items, identified by National Stock Number 8145-01-278-3511 and Part Number 15667 (or alternate 9683-1A). The requirement is for an initial quantity of ten units, with an option for an additional ten units to be exercised unilaterally within 365 days of award. This is an unrestricted requirement under NAICS code 336413, and the award will be a firm-fixed price purchase order granted to the lowest priced, technically acceptable offeror. Quotations are due by November 17, 2026, with an anticipated award date of November 20, 2026, and a requested delivery date of January 20, 2027. All delivered parts must be new approved items, though new surplus may be considered with approval from MRR Engineering and the submission of photos. The contractor must provide full and clear traceability for each part and a Certificate of Conformance per FAR 52.246-15. Delivery is requested as FOB Destination to Elizabeth City, NC. Packaging must be suitable for land, air, or sea transport, avoiding materials such as Styrofoam or peanut packaging, and must ensure preservation against corrosion for one year. Technical acceptability is based on the ability to provide new manufactured commercial items, and the evaluation process will prioritize the lowest priced offer that meets these technical standards.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

3 days ago

DEADLINE

in 5 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS