Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Electrical Insulation Sleeving Manufacturing & Supply

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture and supply of electrical insulation sleeving compliant with military specifications, specifically adhering to SAE AS23053/1 Rev A and MIL-STD packaging standards. All products must be sourced exclusively from PRI-qualified manufacturers to ensure conformity with rigorous defense industry quality controls. The item is intended for use in critical military applications where performance under extreme conditions is essential, and packaging must meet exacting military logistics and handling requirements. Delivery is required to perform at Kings Bay, Georgia, with the full scope of work falling under NAICS code 335932 for other electrical equipment and component manufacturing. This is a subcontract opportunity issued by the ASC Commodities Division of the Department of Defense, with a response deadline of July 31, 2026, and the solicitation posted on July 23, 2026. No set-aside designation is specified, meaning all eligible subcontractors may compete. The place of performance and specified compliance standards indicate this is for a specialized military logistics or fleet support need, likely tied to naval operations in the Kings Bay area. Subcontractors must demonstrate proven capability in producing high-reliability electrical insulation materials under strict military specifications and be prepared to meet exacting packaging and delivery requirements as defined by MIL-STD protocols.

General Info

Manufacture and supply military-compliant electrical insulation sleeving for Kings Bay, Georgia, per SAE AS23053/1 and MIL-STD, using PRI-qualified sources.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335932 - Noncurrent-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

KINGS BAY, GA, 31547-2634, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Manufacture and supply of military-compliant electrical insulation sleeving from PRI-qualified manufacturers, meeting SAE AS23053/1 Rev A and MIL-STD packaging standards.

Similar Contracts

Same NAICS industry code

NAICS: 335932
New
DIBBS
Supply of Electrical Insulation Tape (NSN: 5970-01-706-9505)The contract calls for the procurement and delivery of one unit of commercial off-the-shelf electrical insulation tape identified by NSN 5970-01-706-9505, with strict adherence to military specifications governing performance, packaging, labeling, shelf-life, and hazardous material handling requirements. The tape must meet all applicable defense standards to ensure compatibility and safety in operational environments, and the supplier is responsible for full compliance across every phase of delivery, including proper documentation and compliance with regulatory constraints. The solicitation is classified as a subcontract under NAICS code 335932, issued by the ASC Commodities Division of the Department of Defense, with a response deadline of August 3, 2026. Performance is to be executed to the FPO address with ZIP code 09587, indicating delivery to a military postal location, likely for overseas or deployed operations. The contract was posted on July 26, 2026, and all submissions must be completed before the deadline to qualify for consideration under the procurement process.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
Electrical Conduit Outlet Supply
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
CONDUIT OUTLETThe contract pertains to the procurement of 8 units of a conduit outlet with part number HBL560R9W and NSN 5975-01-555-8269, supplied by HUBBELL INC WIRING DEVICE DIV. Delivery is required within 41 days FOB origin, with no tolerance for variance in quantity, and inspection and acceptance occur at the destination. The product must comply with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards, including ASTM D3951 for commercial packaging. Packaging must follow MIL-STD-129 for marking and labeling, and palletization must adhere to DLA’s RP001 packaging requirements. Hazardous materials, if applicable, must be packaged per FED-STD-313 and TQ requirement IP025. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and critical, major, and minor attributes are assigned specific verification levels or AQLs. The unit of issue is each, priced at $8.00, totaling $64.00. The delivery address is DLA Distribution Albany at 814 Radford Blvd, Building 1221, Door 20, Albany GA 31704-1128, with a required ship date of September 14, 2026. The contract is issued under solicitation SPE4A7-26-T-595C and falls under NAICS code 335932.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
CONDUIT, METAL, FLEXIBLEThis contract specifies the procurement of metal flexible conduit under solicitation SPE4A7-26-T-595F, with a required quantity of 24 units identified by NSN 5975-01-609-2819 and part numbers W-1297-20 from Woolf Aircraft Products, Inc. and 179489-3204 from Hypsan Precision Products, Inc. The item is source-controlled and must be manufactured and tested in strict compliance with limited rights data accessible only to approved vendors, with no government provision of technical data; only qualified suppliers with traceability to approved sources may quote. The delivery is FOB origin with a 166-day timeline, zero tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with marking in accordance with MIL-STD-129 and no special marking codes applied. Palletization follows DLA guidelines, and the unit of issue is each. All quality, inspection, and verification requirements are governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances mandated unless otherwise specified. Critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Certificate of Conformance procedures under FAR 52.246-15 are authorized unless superseded by a quality assurance letter. Documentation for source approval requires a SAR package, and technical specifications referenced by R and I numbers are defined in the DLA Master List. Defense information protections apply, and all items must comply with the referenced technical data packages revisions issued through 2024. This is classified as a critical application item with mandatory compliance to design and testing protocols under the governing drawings and quality assurance provisions.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
TAPE, INSULATION, ELEThis contract is for the procurement of one unit of electrical insulation tape, identified by NSN 5970-01-706-9505 and supplier part number S-17221 from ULINE INC, classified as a commercial off-the-shelf item. The item is subject to strict technical and packaging standards, including compliance with MIL-STD-2073-1E for preservation and MIL-STD-129 for marking, with special labeling indicating it is a Type I shelf-life item with a non-extendable 12-month life. Mercury and mercury-containing compounds are strictly prohibited in the tape, its packaging, preservation, or marking, except for specified functional uses not applicable here, and portable fluorescent lamps or instruments containing mercury must have shock-proof design and a secondary containment barrier. Delivery must be FOB destination within 20 days of contract award, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The sole delivery point is the USS SAN ANTONIO LPD 17, FPO AE 09587, and shipment must follow DLA procedures C19 and C20. Packaging must adhere to DLA’s packaging requirements, with no use of mercury-based materials at any stage. The required delivery date is July 16, 2026, and the contract number is SPE4A6-26-T-09SJ under the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
INSULATION SLEEVING, ELThis contract specifies the procurement of electrical insulation sleeving designed for special purposes, with a shelf life of 48 months and extendable under applicable conditions. The item is classified as a critical application item and must strictly comply with technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, which supersede other standards. Packaging must adhere to DLA’s RP001 requirements and MIL-STD-129 for labeling, with commercial packaging per ASTM D3951 only if the material is non-hazardous; otherwise, it must meet FED-STD-313 and TQ requirement IP025. Palletization and unit packaging must conform to the specified QUP and UI details. The item is subject to zero-defect sampling under MIL-STD-1916 or ASQ H1331, with unspecified attributes treated as major. Mercury or mercury-containing compounds are prohibited unless explicitly exempted for functional applications like batteries or sensors, and portable devices containing mercury must have shockproof construction and secondary containment per NAVSEA 5100-003D. The item must physically conform to SAE AS85049F Revision F dated April 1, 2021, and be marked per RQ017. Inspection and acceptance occur at origin, with no variance permitted in quantity. Delivery is FOB origin, due in 170 days, with the required ship date set for January 3, 2027. All packaging and labeling must reflect proper government identification as required, and removal of such markings from non-accepted supplies is mandatory. The item is identified by NSN 5970012967959 and purchase request 7017409986, with unit price and total cost specified. Transportation and shipping details are governed by DLA proc notes C19 and C20, and delivery is directed to the designated receiving warehouse in Tracy, California.
ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 335932
New
DIBBS
JUNCTION BOX ASSEMBLYThe contract pertains to the procurement of a single Junction Box Assembly with NSN 5975-01-267-3272 and part number 518929-1, furnished by LRG Corp (CAGE 75783), under solicitation SPE4A7-26-T-575V, with delivery required 162 days after award, to DLA Distribution San Diego at 3581 Cummings Road, San Diego, CA 92136-3581. The delivery term is FOB Origin, and inspection and acceptance occur at the destination. The procurement follows a simplified acquisition process with a Lowest Price Technically Acceptable (LPTA) basis for award, and no technical evaluation factors or scoring criteria are disclosed. The item is not subject to Item Unique Identification, and the contractor must comply with DLA Packaging Requirements (RP001) and MIL-STD-2073-1E for packaging, using preservation method 10 (CLNG/DRY), unit container E5, and packaging code U. Marking must conform to MIL-STD-129, including 2D barcodes for logistics tracking, and hazardous materials must be labeled per 29 CFR 1910.1200 and federal standards. Mercury and mercury-containing compounds are prohibited except for functional uses in batteries, fluorescent lamps, sensors, weapon systems, or specified reagents, with portable devices requiring shock-proof construction and a secondary containment barrier in accordance with NAVSEA 5100-003D. Radioactive materials must be disclosed if exceeding specified activity thresholds, and all hazardous materials require prior submission of Safety Data Sheets and NSN/SIN identification. Inspection and acceptance are governed by MIL-STD-1916 or comparable zero-based sampling with zero non-conformances required for acceptance, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, and unspecified attributes deemed major. The contractor must comply with a range of FAR and DFARS clauses, including those on combating trafficking, employment eligibility, sustainable products, hazardous material safety, export controls, and protection of government-furnished property, with several clauses authorized under deviation 2026-00038. Invoicing must be conducted through Wide Area WorkFlow (WAWF), and the contractor must provide its UEI and CAGE code, while
ASC SUPPLIER OPER AE AND AF DIV

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 335932
New
DIBBS
Electrical Chassis ManufacturingThe contract entails the full-scale manufacturing of twelve electrical chassis units strictly adhering to military specifications, covering every phase from initial design validation through component sourcing, precision assembly, and rigorous testing to ensure compliance and operational readiness. The work is subcontracted under the NAICS code 335932, reflecting classification within the electrical equipment manufacturing sector, and performance is designated to occur at a facility in New Cumberland, Pennsylvania, with the zip code 17070-5002. The solicitation, issued by the Department of Defense through its ASC SUPPLIER OPER AE AND AF DIV, was posted on July 23, 2026, and requires responses to be submitted no later than July 31, 2026, indicating a tight turnaround for interested parties to prepare and submit comprehensive proposals meeting technical, quality, and delivery requirements.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 335932
New
DIBBS
Electrical Equipment Rack ManufacturingThe contract requires the manufacture of a single commercial off-the-shelf electrical equipment rack compliant with military specifications and assigned National Stock Number requirements. The item must adhere to established defense standards despite being COTS, ensuring suitability for military use without custom design modifications. The solicitation is issued as a subcontract under NAICS code 335932, indicating the procurement is for other electrical equipment manufacturing, and is being managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The response deadline is set for July 31, 2026, with the solicitation posted on July 23, 2026. Performance is to occur at a location with a FPO address and ZIP code 96662, typical for military overseas or deployed unit logistics. The procurement does not include a set-aside designation, suggesting open competition among qualified subcontractors. All bids must meet technical and compliance criteria tied to military operational environments, and further details can be accessed via the provided DIBBS link.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 335932
New
DIBBS
Electrical Insulation Sleeving Supply (NSN 5970000891454)The contract is for the supply of electrical insulation sleeving compliant with SAE AS23053/5 and AS23053C standards, delivered on reels or spools in specified lengths, identified by NSN 5970000891454. The requirement is classified as a subcontract under the NAICS code 335932, which pertains to other electrical equipment and component manufacturing. The performance location is Tinker Air Force Base, Oklahoma, with a zip code of 73145-8000, and the solicitation is managed by the Nuclear Reactor Program under the Department of Defense. The solicitation was posted on July 23, 2026, with a response deadline of August 3, 2026, requiring all proposals to be submitted prior to the closing time. Delivery must adhere to precise regulatory and dimensional specifications to ensure compatibility with military and aerospace applications, and compliance with the stated SAE standards is mandatory. The procurement is part of ongoing support for critical electrical systems within defense infrastructure.
NUCLEAR REACTOR PROGRAM

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
SWITCH BOXThe contract solicitation SPE7M8-26-T-5588 seeks five SWITCH BOX units identified by NSN 5930-01-582-9676, with a total estimated value of $5.00, delivered to the DLA Distribution Facility at New Cumberland, Pennsylvania, within 168 days of government direction under FOB Destination terms. All items must comply with MIL-STD-2073-1E for packaging and preservation using CLNG/DRY Method 31, and MIL-STD-129 for labeling including barcoding and special shelf life code 33 indicating a 60-month Type II shelf life. Hazardous materials must be labeled per 29 CFR 1910.1200 and radioactive materials above threshold levels must be clearly marked per MIL-STD-129. The contract requires full adherence to DLA Packaging Requirements (RP001) and incorporates technical and quality standards referenced via R or I numbers from the DLA Master List. Offerors must hold a valid UEI and CAGE code and submit representations regarding small business status, including SDB, WOSB, EDWOSB, SDVOSB, and HUBZone classifications, with mandatory disclosures if providing covered defense telecommunications equipment. The contract includes numerous FAR and DFARS clauses addressing cybersecurity, trafficking in persons, employment eligibility, sustainable products, hazardous material reporting, and NIST SP 800-171 assessment requirements, as well as flow-down obligations to subcontractors. Payment must be submitted electronically via WAWF and no paper invoices are accepted. Inspection and acceptance occur at destination by the Government, with compliance governed by FAR 52.246-2. The solicitation closes on August 3, 2026, with submissions required exclusively through the DIBBS portal, and includes no evaluation factors, award basis, or option quantities, nor are any attachments provided. The contracting officer’s representative and technical representative are not named, and the contract type remains unspecified despite the inclusion of an alternate clause.
ELECTRICAL DEVICES DIV

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
INSULATION SLEEVING, ELThe contract specifies the procurement of electrical insulation sleeving identified by NSN 5970000891454, with a total quantity of 3,584 feet split across three delivery lines of 31 feet, 1,541 feet, and 2,012 feet respectively. Delivery is required within 160 days from contract award, with FOB origin terms and a permitted quantity variance of plus or minus 10 percent. Inspection and acceptance occur at the destination, and all materials must be supplied on reels or spools, packaged per MIL-STD-2073-1E, labeled per MIL-STD-129, and palletized according to DLA packaging requirements. The product must comply with SAE AS23053/5 and AS23053C standards, and is classified as a qualified item under the QPL for electrical connector assemblies and contacts. Strict prohibitions ban intentional addition of mercury or mercury compounds, except for approved applications such as batteries, fluorescent lamps, sensors, or weapon systems, with portable mercury-containing devices required to have shock-proof housing and secondary containment as per NAVSEA 5100-003D. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and configuration changes require formal engineering change proposals or variance requests. Shipping destinations include Tinker AFB Oklahoma, Hill AFB Utah, and Robins AFB Georgia, each with specific parcel and freight addresses. The contract was issued under solicitation SPE7M2-26-T-5710 by the Department of Defense, Nuclear Reactor Program, with a response deadline of August 3, 2026.
NUCLEAR REACTOR PROGRAM

POSTED

4 days ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 493190
New
DIBBS
Packaging, Marking & Logistics SupportThe contract requires full compliance with military standards for packaging, marking, and bar-coding as defined by MIL-STD-2073-1E and MIL-STD-129, ensuring all items are properly prepared for military logistics and supply chain handling. Delivery is specified as FOB Origin, meaning the contractor assumes responsibility for packaging and readiness at the point of shipment, with no obligation for transportation costs or risk beyond that point. Invoicing must be processed through the Wide Area Workflow system to meet Department of Defense financial and documentation protocols. This is a subcontract classified as a Total Small Business Set-Aside under FAR 19.5, reserved exclusively for small businesses certified by the Small Business Administration. The NAICS code 493190 indicates the work falls under Other Truck Transportation, suggesting the focus is on logistics and transportation support services tied to military packaging requirements. The contracting office is the ASC Commodities Division under the Department of Defense, with proposals due by August 7, 2026, following a July 27, 2026 posting date. Compliance with all federal and military standards is mandatory for award consideration.
Other Warehousing and Storage

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 541512
New
DIBBS
CMMC Assessment & Cybersecurity ComplianceThis contract entails a CMMC Level 2 assessment and comprehensive cybersecurity system hardening to ensure full compliance with NIST SP 800-171 requirements. The scope includes a detailed audit of existing security controls, identification of gaps, and implementation of remediation measures to meet the necessary cyber hygiene standards. The contractor is responsible for achieving certification through a C3PAO accredited organization, ensuring that all assessed systems are properly documented, secure, and aligned with Department of Defense cybersecurity mandates. The contract is structured as a subcontract under a Total Small Business Set-Aside designation, reserved exclusively for small businesses as defined by the SBA. It is categorized under NAICS code 541512 for Computer Systems Design Services and is issued by the ASC Commodities Division within the Department of Defense. Proposals are due by August 7, 2026, with the solicitation published on July 27, 2026. The work may be performed remotely or at the contractor’s facility, with no specific physical location designated for performance, and the award will be managed under federal subcontracting guidelines applicable to defense-related cybersecurity services.
Computer Systems Design Services

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 541611
New
DIBBS
Technical Data & Export Control Compliance ServicesThe contract pertains to the management of ITAR and EAR-controlled technical data with a focus on ensuring full compliance with U.S. export control regulations. It requires comprehensive services including strict access control protocols, specialized training programs, and ongoing monitoring to enforce restrictions on foreign nationals, ensuring that sensitive technical information is handled in accordance with federal law. The scope emphasizes operational procedures that safeguard controlled data across all stages of handling, from receipt and storage to dissemination and disposal, with particular attention to personnel vetting and security awareness. This is a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, and falls under NAICS code 541611 for administrative management and general management consulting services. The work is contracted through the ASC Commodities Division of the Department of Defense, with a response deadline of August 7, 2026, and a posted date of July 27, 2026. Performance location details are unspecified, indicating flexibility or that the work may be conducted remotely or at multiple sites. The solicitation number is SPE4A626RXB74, and the contract is managed through the DIBBS platform, requiring interested parties to review and submit proposals through the official online portal.
Administrative Management and General Management Consulting Services

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 541330
New
DIBBS
First Article Testing & Quality Certification ServicesThe contract requires independent execution and comprehensive documentation of First Article Testing in strict accordance with DI-NDTI-80809B, encompassing detailed inspection, precise measurement, and formal reporting to the Defense Logistics Agency. This work must be performed with full adherence to quality assurance standards and delivered results that validate compliance with technical specifications for defense-related components or systems. All testing activities, methodologies, and outcomes must be thoroughly recorded and submitted to DLA for review and certification. This subcontract, issued under a Total Small Business Set-Aside, is classified under NAICS code 541330 and is targeted exclusively at small businesses. The performance location and detailed office address are unspecified, but the contracting entity is the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 27, 2026, with a firm response deadline of August 7, 2026, allowing interested small businesses to submit proposals through the DIBBS platform. The requirement emphasizes accuracy, traceability, and regulatory compliance in delivering first article quality certification.
Engineering Services

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
Electrical Component Manufacturing & AssemblyThe contract requires the manufacture, assembly, and quality assurance of electrical leads in full compliance with military specifications, ensuring rigorous adherence to performance and reliability standards. All work must include First Article Testing to validate conformance before full-scale production and includes serialized delivery to enable full traceability of each component throughout its lifecycle. The solicitation is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program, classified under NAICS code 335999 for other electrical equipment and component manufacturing. It is issued under the Department of Defense via the ASC Commodities Division and allows responses until August 7, 2026, with the expectation of performance under a subcontracting arrangement. The place of performance and point of contact details are not specified, but all deliverables must meet stringent defense quality and documentation requirements.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 488510
New
DIBBS
Logistics and Shipment CoordinationThe contract focuses on the coordination of FOB-origin shipments for shear bolts, requiring full compliance with the Web-Based Supply Chain System for invoicing, ensuring all documentation meets WAWF standards. Shipment handling must be executed under DPAS-rated priority to guarantee timely delivery in support of defense logistics, with routing strictly aligned to DoDAAC and CAGE codes to ensure accurate and secure delivery to designated military recipients. This subcontract is designated as a Total Small Business Set-Aside under FAR 19.5, exclusively available to small businesses as defined by the SBA, and is classified under NAICS code 488510, which pertains to other support activities for air transportation and logistics coordination. The posting date is July 27, 2026, with responses due by August 6, 2026, and the contracting entity is the ASC Commodities Division within the Department of Defense, indicating this effort supports critical defense supply chain operations.
Freight Transportation Arrangement

POSTED

about 1 hour ago

DEADLINE

in 10 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection and Conformance ServicesThe contract requires comprehensive quality inspection and conformance testing of shear bolts using zero-defect sampling plans aligned with MIL-STD-1916 or ASQ H1331 standards, ensuring rigorous adherence to defect-free criteria throughout production. Full documentation of all testing procedures, results, and compliance records must be maintained and provided as part of delivery, leaving no room for ambiguity in quality assurance and traceability. This work is critical to confirming that shear bolts meet exacting military and industrial specifications without compromise. This is a total small business set-aside subcontract under NAICS code 541330, awarded by the ASC Commodities Division within the Department of Defense, with a response deadline of August 6, 2026. The solicitation is open exclusively to small businesses as defined by the SBA, and performance will be carried out under the direction of the DLA, though the specific place of performance is not detailed. Interested parties must submit responses through the designated DIBBS portal, and all activities must comply with federal subcontracting regulations and the stringent quality protocols defined by the referenced military and quality standards.
Engineering Services

POSTED

about 1 hour ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Preservation, and Marking ServicesThe contract calls for the military-compliant packaging, preservation, and marking of shear bolts in full accordance with MIL-STD-2073-1E and MIL-STD-129, ensuring all items meet Department of Defense standards for handling, storage, and logistics. This includes the application of barcodes and labeling as required by the specifications, with strict adherence to durability, clarity, and traceability protocols for military supply chain operations. All work must be performed under a Total Small Business Set-Aside, classified under NAICS code 561910, meaning only small businesses are eligible to bid, promoting small business participation in defense logistics. The solicitation is issued by the ASC Commodities Division within the Department of Defense, with a response deadline of August 6, 2026, and was posted on July 27, 2026. The contract is structured as a subcontract, indicating the winning vendor will likely provide services to a prime contractor fulfilling broader defense requirements. While the place of performance and point of contact details are not specified, full compliance with military packaging and marking standards remains the central obligation, with no deviations permitted. Bidders must possess the capability to meet exacting defense logistics requirements and ensure seamless integration of shear bolts into defense inventory and distribution systems.
Packaging and Labeling Services

POSTED

about 1 hour ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
Shear Bolt Manufacturing and SupplyThe contract entails the manufacture and delivery of 9,524 shear bolts designated by NSN 5306-01-123-4603, classified as Critical Safety and Critical Application Items that must adhere to strict military specifications governing quality, traceability, and marking. These components are essential for operational safety and require full compliance with defense standards throughout production, including documented material sourcing, lot tracking, and precise labeling to ensure accountability and reliability in military systems. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 332722 indicating classification under other fabricated metal product manufacturing. The Department of Defense, through its ASC Commodities Division, is the contracting authority, and responses must be submitted by August 6, 2026, following the July 27, 2026 posting date. All work is expected to meet exacting defense requirements without deviation, and the place of performance and point of contact details are not specified in the provided data.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 10 days
View Details
NAICS: 323112
New
DIBBS
Packaging & Preservation Services per MIL-STD-2073-1EThe contract requires comprehensive military-compliant packaging, preservation, and labeling services strictly aligned with MIL-STD-2073-1E specifications. This includes vacuum sealing of items to prevent moisture and contaminants, incorporation of desiccants to maintain dry internal environments, and application of MIL-STD-129 labeling to ensure accurate identification and tracking throughout military logistics channels. All work must meet rigorous defense standards to ensure long-term integrity, readiness, and compatibility with existing supply chain protocols for equipment and materials under the Department of Defense’s ASC Commodities Division. The opportunity is structured as a subcontract with a response deadline of August 27, 2026, and is classified under NAICS code 323112, indicating it pertains to printing and related support activities. The contract was posted on July 27, 2026, and the performance location and specific point of contact are not detailed, but the award will be administered through the Department of Defense’s defense logistics infrastructure. Interested parties must submit proposals via the designated DIBBS portal by the stated deadline to be considered for award.
Commercial Flexographic Printing

POSTED

about 1 hour ago

DEADLINE

in about 1 month
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance & NIST SP 800-171 ImplementationThe contract requires the implementation and ongoing maintenance of NIST SP 800-171 Rev 2 cybersecurity controls across systems that handle covered defense information, ensuring full compliance with federal protection standards. This includes conducting thorough assessments of current security postures, developing and managing Plans of Action and Milestones to address identified gaps, and establishing robust incident reporting procedures to meet mandated timelines and requirements. All activities must be performed in alignment with the stringent security framework outlined in NIST SP 800-171 Rev 2, with continuous monitoring and documentation to demonstrate adherence. This is a subcontract under the Department of Defense, specifically managed by the ASC Commodities Division, with a NAICS code of 541512 indicating it pertains to computer systems design services. The solicitation was posted on July 27, 2026, and responses are due by August 27, 2026. The place of performance is not specified, but the work must support Defense Information systems, and all compliance activities must be executed regardless of location. The contract emphasizes sustained operational security, formal documentation, and accountability through structured remediation efforts and timely incident response.
Computer Systems Design Services

POSTED

about 1 hour ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
DIBBS
Quality Assurance & Government Inspection Support ServicesThe contract entails providing advanced inspection systems and comprehensive support services to facilitate government-led quality verification at the point of origin, ensuring full compliance with MIL-STD-1916 and ASQ Z1.4 standards. This includes establishing robust audit readiness protocols, maintaining accurate and accessible recordkeeping systems, and managing nonconformances through structured corrective action processes to uphold defect prevention and continuous quality improvement. The scope demands integration of inspection technologies and procedures that enable real-time data capture, traceability, and reporting to meet rigorous defense quality requirements. The work is classified as a subcontract under NAICS code 541330 and is being administered by the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 27, 2026, with responses due by August 27, 2026. While specific performance locations and point of contact details are not provided, the nature of the services implies operations at supplier or manufacturing facilities where government quality verification takes place. Successful proposers must demonstrate experience with military standards, proven quality systems, and the ability to deliver scalable inspection infrastructure capable of supporting high-stakes defense supply chain integrity.
Engineering Services

POSTED

about 1 hour ago

DEADLINE

in about 1 month
View Details