Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Electrical Insulation Tape Manufacturing & Supply

Active

Federal

Response Deadline08/07/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the manufacture and supply of electrical insulation tape compliant with military specifications, specifically CID A-A-59474D, along with adherence to MIL-STD packaging and marking standards. The product must meet rigorous performance and quality benchmarks required for military applications, ensuring reliability under demanding environmental and operational conditions. The NAICS code 335932 indicates this is a contract for other electrical component and accessory manufacturing, targeting suppliers with expertise in high-performance insulating materials. The solicitation is issued as a subcontract under the Department of Defense, managed by the ASC SUPPLIER OPER AE AND AF DIV, with the place of performance designated as POINT MUGU NAWC, CA 93042-5051. Bidders must submit responses by August 7, 2026, after the posting date of July 30, 2026. The contract does not specify any set-aside provisions, and while no point of contact is listed, the official solicitation link provides further details for interested parties. Compliance with all technical, packaging, and labeling requirements is mandatory for award consideration.

General Info

Manufacture and supply military-grade electrical insulation tape per CID A-A-59474D and MIL-STD, due August 7, 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

335932 - Noncurrent-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

POINT MUGU NAWC, CA, 93042-5051, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and supply of electrical insulation tape meeting military specifications including CID A-A-59474D and MIL-STD packaging and marking standards.

Similar Contracts

Same NAICS industry code

INSULATION SLEEVING

Solicitation # SPE4A6-26-T-09FK

This contract requires the supply of electrical insulation sleeving as a qualified product listed under the Performance Review Institute’s QML or QPL program, meaning only manufacturers or assembler-distributors listed on the official DLA-recognized qualified lists may supply the item. The product must conform to SAE AS23053/1 Revision A dated March 1, 2018, and comply with MIL-STD-129R(3) for marking, with a Type II shelf life of 12 months extendable as per code 4 standards, clearly marked with special code 33. The material must be supplied on reels or spools, each packaged and labeled in strict accordance with MIL-STD-2073-1E and MIL-STD-129, including 2D Data Matrix barcodes, and palletized using DLA’s RP001 packaging requirements. Zero non-conformance sampling per MIL-STD-1916 or ASQ H1331 is mandated, with any unspecified attributes treated as major and requiring zero defects in sampled lots. Mercury or mercury compounds are prohibited except for specific functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or naval chemical reagents, and where used, portable devices must include a second containment boundary per NAVSEA 5100-003D. Inspection and acceptance occur at the delivery point in Kings Bay, Georgia, with a 20-day delivery window from order date and a quantity variance of plus 10 percent and zero percent reduction. All shipping and marking must adhere to DoD standards including hazardous material labeling under 29 CFR 1910.1200 and full compliance with DLA’s electronic invoicing system WAWF. The contract includes stringent cybersecurity mandates under DFARS 252.204-7012 and 252.240-7997 requiring compliance with NIST SP 800-171, immediate cyber incident reporting, and an assessment of the contractor’s information system controls. Additionally, the contractor is prohibited from using covered telecommunications equipment from designated foreign vendors under DFARS 252.204-7018 and must ensure all subcontractors adhere to the same restrictions. Offerors must hold a valid UEI and CAGE code, qualify as a small or other-than-small business, and affirm compliance with ethics provisions prohibiting compensation of

ASC COMMODITIES DIVISION

POSTED

DEADLINE

INSULTING WASHERS

Solicitation # N0016426Q0275

The U.S. Navy’s Naval Surface Warfare Center Crane is soliciting hydrophone backing plates under a sole-source procurement with limited competition, identified by solicitation number N00164-26-Q-0275 and NAICS code 335932. The procurement is authorized under FAR 13.106-1 and is restricted to previously tested and approved vendors—Brownstown Quality Tool & Automation, LLC, Wagler Competition Products, and Stark Precision Machine—who are the only entities eligible to submit offers. Although other responsible sources may submit capability statements, the Government retains full discretion to proceed without full competition based on its evaluation. The requirement is classified under FSG 5970 and involves specialized components critical to naval operations. Offerors must be actively registered in the System for Award Management (SAM) and the Joint Certification Program (JCP) to access controlled documentation and be considered for award. The solicitation was issued on July 31, 2026, with responses due by 4:00 PM Eastern Time on August 6, 2026. All submissions must be emailed directly to Cierra Vaughn at cierra.n.vaughn2.civ@us.navy.mil and include all required documentation. Potential vendors are responsible for regularly monitoring sam.gov for any amendments or updates prior to the deadline; changes issued after the closing date will only be shared with submitting offerors. This action falls under FAR Part 13 simplified acquisition procedures and is exempt from public synopsis under FAR 5.202(a)(13). The place of performance is Crane, Indiana, and the contracting office is within the Department of Defense. No set-aside status applies to this procurement.

POSTED

DEADLINE

Electrical Insulation Sleeving Manufacturing and SupplyThe contract specifies the manufacture and delivery of electrical insulation sleeving in accordance with military specifications, requiring strict adherence to technical standards, quality control protocols, packaging guidelines, and labeling requirements. All products must be produced to meet rigorous defense-grade performance criteria and must be fully compliant with applicable military and federal regulations. The work is being procured as a subcontract under the Department of Defense, specifically through the ASC COMMODITIES DIVISION, with performance required at the designated location in New Cumberland, Pennsylvania, zip code 17070-5002. The NAICS code 335932 identifies the industry classification as other electrical equipment and component manufacturing. The solicitation was posted on July 30, 2026, with responses due by August 7, 2026, giving interested parties approximately one week to submit proposals. The contract falls under a subcontract type with no specific set-aside designation, meaning it is open to any qualified supplier regardless of business size or ownership categorization. Interested parties must access the official DIBBS portal via the provided link to obtain full details, submit bids, and ensure compliance with all submission procedures and deadlines. Failure to meet technical, quality, or delivery requirements may result in rejection or contract termination.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

High-Performance Insulation Sleeving ManufacturingThe contract requires the manufacture of 29 units of military-grade insulation sleeving designated by NSN 5970-12-412-0450, adhering to zero-defect quality standards and all technical specifications mandated by the Defense Logistics Agency. The product must meet rigorous performance criteria to ensure reliability in defense applications, with strict compliance expected throughout the production process. The work is classified as a subcontract under NAICS code 335932 and is being managed by the ASC Commodities Division of the Department of Defense, with performance required at the facility located in New Cumberland, Pennsylvania, zip code 17070-5002. Responses must be submitted by the deadline of August 7, 2026, with the solicitation originally posted on July 30, 2026. The nature of the procurement indicates an urgent operational need, emphasizing precision, timeliness, and adherence to stringent defense standards. The contract is not subject to any specific set-aside provisions, and all interested parties must ensure full alignment with DLA technical requirements to qualify for award. The official solicitation details are accessible via the DIBBS platform at the provided link.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

INSULATION SLEEVING

Solicitation # SPE4A6-26-T-10ZY

The contract pertains to the procurement of insulation sleeving identified by part number 223-0160-9001 and NSN 5970-12-412-0450, supplied by NORRES SCHLAUCHTECHNIK GMBH CO KG. A total of 29 units are required at a unit price of $29.00, with no variance allowed in quantity. Delivery is to be made FOB origin within 322 days of the contract award, with inspection and acceptance occurring at the manufacturer’s location. The item is classified as a critical application item and must comply with strict technical and quality requirements referenced from the DLA Master List, including MIL-STD-1916 or ASQ H1331 sampling procedures with zero non-conformances required unless otherwise specified. Quality assurance follows SAE AS9100 standards, and packaging must fully adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking codes required. Palletization complies with DLA packaging guidelines, and the item has no shelf life restriction. The shipment must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation protocols are governed by specific DLAD procedural notes. Contract data indicates the solicitation was issued on July 30, 2026, with a response deadline of August 7, 2026, under NAICS code 335932 for other electrical equipment and component manufacturing, and is managed by the Department of Defense’s ASC Commodities Division.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

INSULATING COMPOUND

Solicitation # SPE4A6-26-T-10QF

This contract specifies the procurement of an electrical insulating compound identified by NSN 5970-01-013-8611, categorized as a commercial off-the-shelf (COTS) item meeting MIL-I-46058C specifications and qualified under QPL 46058, Type UR. The product is classified as a Type I item with a non-extendable shelf life of 18 months, requiring strict adherence to shelf-life controls and special marking per code 32. The compound is designated as a hazardous material under DOT Class 3, shipping name RESIN SOLUTION UN1866 PG III, and must comply with full hazardous communication standards including approved SDS and OSHA hazard warning labels reviewed and submitted to DLA Aviation HMIRS prior to award. Mercury and mercury-containing compounds are prohibited unless functionally necessary in specified devices, and any portable instruments containing mercury must include double containment as per NAVSEA 5100-003D. The item must be packaged in accordance with MIL-STD-2073-1E and marked per MIL-STD-129 with palletization following DLA packaging requirements. Inspection and acceptance occur at the manufacturer’s origin using zero-defect sampling under MIL-STD-1916 or ASQ H1331, with critical attributes assigned verification level VII and an AQL of 0.1. Delivery is required within 20 days FOB destination for two separate consignments—one to USCG Training Center in Yorktown, Virginia, and another to USS Wasp (LHD 1) via vessel shipment—both subject to zero quantity variance. Shipment must occur via the fastest traceable means, prohibiting parcel post. The contract includes unique tracking identifiers, project codes, and government-use-only codes, with performance governed by the DLA Master List of Technical and Quality Requirements incorporated by reference. The solicitation is open under SPE4A6-26-T-10QF with a response deadline of August 7, 2026, and is sourced by the Department of Defense’s ASC Commodities Division.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7LX-26-U-8653

The contract solicitation SPE7LX-26-U-8653 issued by the Department of Defense’s Strategic Acq Program Directorate through DLA Land and Maritime establishes an Indefinite-Delivery Contract (IDC) for the procurement of 34 units of RAIL, GUIDE (NSN 5975-01-556-2823), with a guaranteed minimum quantity of 5 units and a maximum contract value of $350,000.00. Delivery is required within 135 days after the placement of a delivery order, with FOB Origin terms applying, meaning the contractor assumes all transportation risk and cost to a designated point within the contiguous United States. Inspection and acceptance occur at the destination, following strict quality assurance protocols that prioritize MIL-STD-1916 or ASQ H1331 for sampling, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero nonconformances are required in samples unless otherwise stipulated, and DLA’s Master List of Technical and Quality Requirements supersedes all other standards including ASTM D3951. Packaging and labeling must strictly adhere to MIL-STD-129 for all markings and barcoding, with hazardous materials packaged per TQ requirement IP025 as defined by FED-STD-313, while non-hazardous items follow commercial packaging standards under ASTM D3951 unless overridden by DLA requirements. Palletization must comply with RP001: DLA Packaging Requirements for Procurement. All shipments require compliance with the Hazard Communication Standard (29 CFR 1910.1200) and submission of hazard labels for non-exempt materials prior to award. Electronic invoicing through WAWF is mandatory, and the contractor must maintain current SAM registration. Contractual clauses enforce cybersecurity safeguards including 252.204-7012 for safeguarding covered defense information, prohibit trafficking in persons, require employment eligibility verification, and mandate compliance with sustainable product requirements. The contract includes clauses allowing for changes, unenforceability of unauthorized obligations, and accelerated payments to small business subcontractors, and requires the offeror to represent its small business status and disclose UEI and CAGE codes if providing covered defense telecommunications equipment.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

INSULATION SLEEVING, EL

Solicitation # SPE4A6-26-T-10UP

This contract specifies the procurement of electrical insulation sleeving under NSN 5970-01-432-4149, with a requirement for three units delivered FOB origin within 716 days, by July 24, 2028. All supplies must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking needed. The item is not subject to Item Unique Identification, as per DFARS 252.211-7003(c)(1)(i), and physical identification must adhere to RQ017 standards. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced via R or I numbers. The contractor must adhere to DLA packaging procedures, and delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania. Measuring and test equipment must meet RT001 standards, and documentation for source approval is required per RC001. Covered defense information may apply, and removal of government identification from non-accepted supplies is mandated per RQ011. The procurement is classified under NAICS 335932 and issued by the Department of Defense, ASC Commodities Division, with John Schaefer as the primary point of contact.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

INSULATION SLEEVING, EL

Solicitation # SPE4A6-26-T-10PN

The contract specifies the procurement of electrical insulation sleeving under NSN 5970-01-695-1230, with a quantity of 4 feet to be delivered within five days FOB origin. The material must comply with ASTM D3295-20 standards and is classified as non-hazardous per HMIC review, eliminating the need for a Safety Data Sheet. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 respectively, with no special marking required. Packaging follows DLA’s procurement requirements, using unit containers E5, no cushioning, and a pack code of U. The item is to be palletized according to DLA standards and shipped via the fastest traceable means, excluding parcel post, to the Letterkenny Army Depot in Chambersburg, PA. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and unspecified attributes treated as major. The delivery is subject to a 10% positive quantity variance. The contract is issued under solicitation SPE4A6-26-T-10PN with a response deadline of August 7, 2026, and the original required delivery date is July 28, 2026. Technical and quality requirements are governed by the DLA Master List, and the unit of issue is feet. All deliveries are to be made to the government’s designated point of receipt with inspection and acceptance occurring at destination.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

PANEL, ELECTRICAL-EL

Solicitation # SPE4A5-26-T-282E

This contract is for the procurement of one electrical panel, part number CA81662-001, identified by NSN 5975-01-593-7215, to be delivered to the USS CHUNG HOON DDG 93 at FPO AP 96662 within 20 days of award. Delivery is FOB destination with zero tolerance for quantity variance, and both inspection and acceptance occur upon arrival at the final delivery point. The item must comply with MIL-STD-2073-1E for preservation and packaging, and marking must adhere to MIL-STD-129 with no special marking required. Packaging must follow DLA’s procurement standards, and mercury or mercury-containing compounds are strictly prohibited in preservation, packaging, and marking, except for specified functional uses in batteries, lighting, instruments, sensors, weapon systems, or NAVALSEA-approved chemical reagents, with additional containment requirements for portable mercury-containing devices. Sampling and quality verification must conform to MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise defined, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. The supplier must ensure compliance with Cybersecurity Maturity Model Certification Level 2 self-assessment and handle Covered Defense Information per applicable regulations. The contract references DLA’s Master List of Technical and Quality Requirements and mandates adherence to all referenced standards including physical identification, removal of government markings from non-accepted items, and unit of issue alignment with ANSI X12 standards. The contract is issued under solicitation SPE4A5-26-T-282E with an original required delivery date of July 6, 2026, and is managed by the Department of Defense’s ASC Supplier Operations OEM Division.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

DISTRIBUTION BOX

Solicitation # SPE7M1-26-T-242J

The contract is for the procurement of two Distribution Boxes with NSN 6110015891812 under solicitation SPE7M1-26-T-242J, issued by the Maritime Supply Chain under the Department of Defense. The total contract value is $4.00, with a unit price of $2.00 per unit, and delivery is required within 180 days from award, with a firm delivery date of February 7, 2027. Delivery is FOB origin, meaning the contractor bears all transportation costs and risks until the goods are transferred to the carrier at the point of origin. The destination for delivery is W1A8 DLA DIST SAN JOAQUIN, 25600 S CHRISMAN ROAD, REC WHSE 57, TRACY CA 95304-5000, United States. Inspection and acceptance both occur at the destination, and the government is responsible for inspection per FAR 52.246-2. Packaging and labeling must strictly conform to MIL-STD-129, including proper barcode and data matrix markings, with the Unit of Issue and Quantity per Unit Pack exactly as specified in the contract. Palletization is governed by RP001: DLA Packaging Requirements for Procurement, and all packaging must comply with ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, which takes precedence. The contractor must also comply with the Hazard Communication Standard under 29 CFR 1910.1200 for any hazardous materials, unless specifically exempted under federal statutes. All shipments must include required documentation as per DLAD PROC NOTES C19 and C20, and invoicing must be submitted electronically through WAWF using the Combo Document format. The solicitation mandates adherence to numerous FAR and DFARS clauses, including equal opportunity for workers with disabilities, combating trafficking in persons, employment eligibility verification, safeguarding contractor information systems, NIST SP 800-171 requirements for controlled unclassified information, and prohibitions on acquiring covered telecommunications equipment. Offerors must complete representations on small business status, socioeconomic eligibility, and UEI/CAGE disclosures for any joint ventures or covered items, though no selections are pre-filled. The contract permits no quantity variance, and the clause for changes applies under fixed-price terms. The primary point of contact for the contracting activity

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

TAPE, INSULATION, ELE

Solicitation # SPE4A7-26-T-601F

The contract pertains to the procurement of electrical insulation tape meeting specific technical and quality standards, with dimensions of 1.000 inches in width and 108 feet in length, and a thickness of 0.0015 inches in natural color. The product must comply with MIL-STD-129P for shipping and labeling, and MIL-STD-2073-1E for packaging, including special marking code 33 indicating Type II with an 18-month shelf life extendable under DLA’s RS001 requirement. All items are classified as critical application products and must adhere to the TDP Rev A Gen 1 referenced under CID A-A-59474D and MIL-STD-129R. The tape must conform to the DLA Master List of Technical and Quality Requirements, incorporating referenced R and I numbers, and is subject to zero-defect sampling per MIL-STD-1916 or ASQ H1331, with unspecified attributes treated as major. Inspection and acceptance occur at origin under RQ009 and RQ001 tailored requirements, with no variance allowed in quantity and delivery expected within five days FOB origin. The item is identified by NSN 5970-01-258-1216 with a purchase request number 7017636642, and the order quantity is exactly three rolls (RO), with no tolerance for over or under shipment. Packaging must follow DLA’s RP001 requirements, using E5 unit containers, no cushioning, and standardized marking. The contract falls under solicitation SPE4A7-26-T-601F, issued by the Department of Defense’s ASC Supplier Oper AE and AF Division, with performance located at Point Mugu NASC, CA 93042-5051. Contract details indicate a posting date of July 30, 2026, and a response deadline of August 7, 2026, with Hannah Leonard listed as the primary point of contact. The unit of issue is RO as authorized by DoD, with ANSI X12 equivalents defined via DLA’s official URL, and all technical and quality directives are current as of the solicitation date under DLA’s control provisions for simplified or large acquisitions.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Small Business Subcontracting Participation (Opportunity for DBE/MBE/WBE)This opportunity is designed to facilitate participation by certified small businesses, including 8(a), HUBZone, WOSB, and SDVOSB entities, in supply, packaging, and quality assurance roles under a prime contractor’s FAR 52.219-9 subcontracting plan. The solicitation targets organizations eligible for small business set-asides and aims to integrate them into the supply chain for defense-related activities managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. The North American Industry Classification System code 334332 indicates the focus is on electronic component and board manufacturing, suggesting subcontracting needs related to production, testing, and logistics support within this sector. The deadline for responses is August 31, 2026, with the opportunity posted on July 31, 2026, allowing prospective bidders a one-month window to prepare and submit their proposals. While no specific place of performance or point of contact is listed, the contract is accessible through the DIBBS portal, and participation is contingent upon meeting certified small business status and aligning with the prime contractor’s subcontracting goals. There is no mention of a monetary value or specific contract duration, but the structure implies a framework for ongoing or long-term subcontracting engagement rather than a single project. Certified firms are encouraged to engage through the provided link to secure a role in this defense supply chain initiative.

POSTED

DEADLINE

Quality Assurance and Inspection Services (Sub-tier Support)The contract entails providing independent quality assurance and inspection services as a sub-tier support to ensure compliance with DLA and MIL-STD standards across multiple stages of manufacturing and delivery. Key responsibilities include conducting first article inspections to validate initial production samples, performing in-process checks to maintain consistent quality during production, and executing final acceptance testing to confirm that end products meet all technical and performance specifications. Additionally, the contractor is required to review all associated documentation for accuracy and completeness and to systematically track, report, and manage non-conformances to ensure timely resolution and prevent recurrence. The work must be executed with precision and adherence to federal defense procurement standards, ensuring that all deliverables are traceable, auditable, and fully compliant with applicable military specifications. This subcontract is issued under NAICS code 541330 and is associated with the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 31, 2026, with responses due by August 31, 2026. Although specific location details and point of contact information are not provided, performance is expected to align with the needs of the defense supply chain, likely involving coordination with prime contractors and defense manufacturing facilities. Participation requires demonstrated expertise in military quality systems and the ability to operate independently within a highly regulated environment, ensuring that all inspection and assurance activities support mission-critical defense outcomes.

Engineering Services

POSTED

DEADLINE

Specialized Packaging and Marking ServicesThe contract involves specialized packaging and marking services for finished cable assemblies, requiring strict adherence to MIL-STD-2073-1E for packaging standards and MIL-STD-129 for labeling requirements. All packaging must include barcodes, CAGE codes, lot and serial numbers, and proper FOB origin coordination to ensure full compliance with military logistics protocols. The work is classified as a subcontract under NAICS code 493190 and is solicited by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The solicitation was posted on July 31, 2026, with a response deadline of August 31, 2026, and performance will be conducted in accordance with federal defense supply chain expectations, though specific performance location details are not provided. Interested parties must submit proposals through the designated DIBBS portal prior to the deadline.

Other Warehousing and Storage

POSTED

DEADLINE

Wire Rope and Cable Conduit SupplyThe contract specifies the supply of high-strength, naturally coiling wire rope and protective conduit engineered to endure a minimum tension of 552 lbs, ensuring durability and reliability under demanding operational conditions. All components must comply with MIL-STD-2073-1E packaging standards, guaranteeing secure, standardized handling, storage, and transportation throughout the supply chain. The work is classified as a subcontract under NAICS code 332420, indicating the manufacturing of wire and cable, and is issued by the Department of Defense through its ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 31, 2026, with responses due by August 31, 2026, allowing interested parties sufficient time to prepare and submit proposals. Performance location and point of contact details are not specified, and the procurement is accessible via the DIBBS platform for further information and submissions.

Metal Tank (Heavy Gauge) Manufacturing

POSTED

DEADLINE

Precision Connector and Receptacle SupplyThe contract calls for the supply of high-reliability, MIL-SPEC compliant electrical connectors and receptacles equipped with protective caps, intended for integration into control cable assemblies. All components must be certified as free from counterfeit parts and must adhere strictly to military specification standards to ensure performance under demanding operational conditions. The products are critical to defense systems requiring robust electrical connectivity and must be manufactured with traceable materials and processes to maintain integrity throughout the supply chain. This is a subcontract opportunity issued under NAICS code 334332 by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 31, 2026. The requirement emphasizes compliance with defense-grade quality controls and demands rigorous documentation to verify conformance to specifications. While the place of performance and point of contact details are unspecified, the procurement is managed through the DIBBS system, indicating formal defense procurement protocols are in effect. Suppliers must demonstrate proven capability in producing MIL-SPEC components and maintaining strict anti-counterfeit measures to qualify.

POSTED

DEADLINE

Cable Assembly Manufacturing and TestingThe contract calls for the full production of control cable assemblies designated as P/N 2600930-001, encompassing all manufacturing steps from wire rope coiling to the secure attachment of connectors, followed by rigorous tension testing at 552 pounds and final inspection. All work must strictly adhere to MIL-STD-1916 and ASQ H1331 quality standards, with an absolute requirement of zero non-conformance tolerance across the entire production batch. This is a subcontract within the Department of Defense procurement framework under NAICS code 335931, initiated by the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 31, 2026, and the solicitation posted on July 31, 2026. Production and delivery must meet exacting military specifications to ensure reliability and performance under operational conditions.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

Small Business Subcontracting ParticipationCertified small businesses including WOSB, SDVOSB, and HUBZone concerns are invited to participate as subcontractors under a total small business set-aside prime contract managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. This opportunity is specifically aligned with NAICS code 336413, which pertains to aerospace product and parts manufacturing, and encompasses potential roles in manufacturing, testing, or logistics functions. The solicitation is structured to ensure full small business participation as mandated by the Small Business Administration under FAR 19.5, and interested entities must respond by the deadline of August 28, 2026. Opportunities are available to qualified small businesses supporting defense-related supply chain activities, with all work expected to be performed under the prime contract awarded to a certified small business concern. Participation is only open to entities that meet SBA certification requirements and can demonstrate capability in the specified technical areas.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Packaging, Marking, and Logistics for DeliveryThe contract requires the packaging and marking of wing panels in strict accordance with MIL-STD-129 standards, ensuring all items are properly labeled with 2D Data Matrix barcodes and clearly identified by NSN and part number. Logistics preparation must align with FOB Origin and Destination requirements to facilitate seamless delivery and tracking throughout the supply chain. The work is categorized as a subcontract under a Total Small Business Set-Aside, meaning only small business concerns are eligible to respond, as defined by the SBA and FAR 19.5. The North American Industry Classification System code 493190 indicates the work falls under Other Transportation Support Activities, reflecting the focus on logistics and packaging support rather than manufacturing. The solicitation is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV with a response deadline of August 28, 2026, and was posted on July 31, 2026, providing interested parties approximately four weeks to prepare and submit proposals.

Other Warehousing and Storage

POSTED

DEADLINE

Government First Article Testing (FAT) SupportThis contract supports Government-conducted Factory Acceptance Testing for up to two units, requiring the contractor to ensure full site access, provide comprehensive documentation, and deliver test-ready units ready for evaluation. The effort is tied to the Government’s First Article Testing process and demands coordination to meet all technical and procedural requirements necessary for successful FAT execution. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to respond. The North American Industry Classification System code 541330 designates the scope as engineering services, aligning with technical support and testing services for defense-related systems. The contract was posted on July 31, 2026, with a response deadline of August 28, 2026, and is administered by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV. The place of performance and point of contact details are not specified, indicating potential flexibility or site-specific arrangements to be determined post-award.

Engineering Services

POSTED

DEADLINE

Wing Panel Manufacturing and AssemblyThe contract titled Wing Panel Manufacturing and Assembly pertains to the production and delivery of PANEL, WING units under strict adherence to technical specifications, material certifications, and CAGE/part number requirements, ensuring full compliance with defense industry standards. It is structured as a subcontract and falls under a Total Small Business Set-Aside designation, reserved exclusively for small businesses as defined by the Small Business Administration, with the NAICS code 336413 identifying it within the Aircraft and Aircraft Parts Manufacturing sector. The solicitation was posted on July 31, 2026, with responses due by August 28, 2026, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, though specific location details for performance or contact information are not provided. All deliverables must meet rigorous quality and traceability criteria aligned with federal procurement protocols.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Unable to Retrieve Subcontract OpportunitiesA system error prevented the retrieval of subcontractor and supplier opportunities associated with the prime contract, making it impossible to break down actionable sub-opportunities. The solicitation, posted on July 31, 2026, with a response deadline of August 31, 2026, is categorized as a subcontract under the Department of Defense, specifically managed by the ASC SUPPLIER OPER AE AND AF DIV. No solicitation number, NAICS code, set-aside details, organizational type, or physical address information is available, and the point of contact is undefined. The place of performance and other location data are also omitted, leaving critical details incomplete. The only identifiable reference is the online link to the DIBBS portal where the original posting exists, but without sufficient data to evaluate or pursue potential sub-contracting avenues.

POSTED

DEADLINE

High-Reliability Component Supply (Item 0001-S00000061)The contract entails the supply of a high-reliability component designated as Item Number 0001-S00000061, with stringent requirements for quality assurance, comprehensive documentation, and full compliance with military standards. The component must meet exacting technical and performance specifications to ensure operational readiness and durability under demanding conditions, typical of defense applications. All deliverables must be accompanied by certified test reports, material certifications, and traceability records to validate conformance to applicable military and industry specifications. This is a subcontract awarded under the NAICS code 332999, classified as an Other Miscellaneous Manufacturing category, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The solicitation was posted on July 31, 2026, with a firm response deadline of August 31, 2026, allowing suppliers a one-month window to submit proposals. The place of performance and specific point of contact details are not provided, but the contract is accessible through the DIBBS system at the specified URL, and all offerors are expected to adhere to federal procurement regulations and defense-specific supply chain protocols without set-aside restrictions.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE