Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Electrical Wire Supply (Copper Conductor, Continuous Length)

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the supply and delivery of 500-foot spools of electrical wire with a copper conductor, meeting federal and military specifications, including the National Stock Number 6145-01-469-3805, with a strict requirement for continuous-length wiring without splices or joints. The wire must comply with all applicable technical and quality standards mandated by military and federal regulations to ensure performance and reliability in critical applications. The procurement is structured as a subcontract under NAICS code 335921, indicating it pertains to the manufacturing of other electrical equipment and components, and is being managed by the Department of Defense through its Maritime Supply Chain ESOC Buys division. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, and the place of performance is specified as Jacksonville with a ZIP code of 28545-6070. Although the solicitation number is not provided, the procurement is accessible via the DIBBS platform for vendor submission and tracking. The contract does not specify any set-aside preferences or designated small business classifications, and there is no listed point of contact for inquiries. Vendors must ensure full compliance with the technical requirements and delivery schedule to meet the operational needs of the end user within the Department of Defense supply chain.

General Info

500-foot copper electrical wire spools, no splices, federal/military specs, delivery to Jacksonville, DoD procurement.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

335921 - Fiber Optic Cable ManufacturingView NAICS

Place of Performance

JACKSONVILLE, NC, 28545-6070, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply and delivery of 500-foot spools of electrical wire compliant with federal and military specifications, including NSN 6145-01-469-3805 and continuous-length requirements.

Similar Contracts

Same NAICS industry code

NAICS: 335921
New
DIBBS
CABLE ASSEMBLY, FIBE
Solicitation # SPE4A0-26-T-4153
The contract pertains to the supply of 30 units of a fiber optic cable assembly with part number 7348668G59 and NSN 6020015211052, sourced under solicitation SPE4A0-26-T-4153. Delivery is required within five days of award, FOB origin, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. The item is classified as a critical application item and must comply with stringent technical, quality, and security standards referenced in the DLA Master List of Technical and Quality Requirements, including MIL-STD-1916 sampling protocols with zero non-conformances permitted unless otherwise stated. The supply must adhere to MIL-STD-2073-1E preservation and MIL-STD-129 marking standards, with packaging and palletization following DLA-specific requirements and prohibiting any mercury or mercury compounds in preservation, packaging, or marking. The contract enforces CMMC Level 2 compliance, requires IUID labeling per MIL-STD-130 and DFARS 252.211-7003, and prohibits intentional use of mercury except in narrowly defined functional applications such as specific batteries or sensors, which must include secondary containment. Transportation instructions specify shipment to Norfolk Naval Air Terminal under RDD 999/NMCS guidelines, with the original required delivery date set for July 27, 2026, and the point of contact is Danita Davis of DLA.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 335921
New
Federal
Fiber Optic Cable & Wires
Solicitation # WX03406Y2026T
FEMA Region 1, under the Department of Homeland Security, is soliciting Fiber Optic Cable & Wires for its Federal Regional Center located at 63 Old Marlboro Rd, Maynard, MA, under solicitation number WX03406Y2026T. This is a Small Business Set-Aside with the NAICS code 335921, meaning only small businesses are eligible to respond, and the solicitation requires full compliance with SAM registration, including submission of a Unique Entity Identifier (UEI) and CAGE code. Offers must be submitted via email no later than 4:00 PM ET on Thursday, August 6, 2026, to the designated points of contact, and the delivery of all supplies must be completed within 90 days of contract award. The contract is intended to be awarded on a Lowest Priced Technically Acceptable basis, meaning technical acceptability is a mandatory pass/fail threshold, and among those who meet the minimum specifications outlined in the Statement of Work, the lowest price will prevail. Accepted items include specific quantities of 24-fiber OM4 armored outdoor cable, 18/6C shielded communication cable, fiberglass and polyester pull tape, and intrusion tamper switches, with no alternative standards cited beyond general federal compliance requirements. The Government will inspect and accept delivered goods only at the delivery destination, and payment is contingent upon formal acceptance. Clause 52.212-4 governs the terms and conditions, with a deviation noted, and the contract incorporates stringent security and compliance requirements under FAR 52.240-90 and 52.240-91, prohibiting the use of covered telecommunications equipment and services from restricted vendors such as Kaspersky Lab, and requiring strict adherence to OFAC sanctions regarding Sudan and Iran. Contractors must also certify they do not conduct restricted business operations in those regions and must report any identified non-compliant items within 72 hours. Flow-down clauses require these requirements to extend to all subcontractors, and failure to comply may disqualify a proposal or result in contract termination. No pricing data is provided in the solicitation, and the contract value remains unspecified, though all submissions must include a fully itemized quote. Packaging, marking, and preservation requirements reference manufacturer CAGE codes, model numbers, and OEM identifiers but do not specify adherence to MIL-STDs. The contract explicitly prohibits use of artificial intelligence as defined under federal statute
Region 1

POSTED

2 days ago

DEADLINE

in about 20 hours
View Details
NAICS: 335921
New
DIBBS
CABLE ASSEMBLY, FIBE
Solicitation # SPE7M1-26-T-240E
This contract obligates the supplier to deliver two units of a fiber optic cable assembly identified by NSN 6020-01-692-6310 and part number 6877804-14, with a total price of $2.00 per unit, to be delivered FOB destination within 20 days of contract award. The item must comply with all applicable technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including packaging per MIL-DTL-12000 and handling requirements under MIL-STD-2073-1E and MIL-STD-129 for marking and preservation. Packaging must ensure physical protection using Method 10, with cable ends secured by a neutral wrap of at least four inches, and cables must be mounted on spools or reels with a minimum six-inch diameter; shorter lengths must be coiled with a minimum six-inch center radius and secured at three points. The entire shipment must be enclosed in a compliant box meeting PPP-B-566, PPP-B-676, or ASTM-D5118 specifications with adequate cushioning and proper closure. No mercury or mercury-containing compounds may be introduced in or in contact with the item, except for specified functional uses in batteries, lighting, sensors, or weapon systems as defined by NAVSEA, and any portable items containing mercury must have shockproof construction with a secondary containment barrier. All packaging and markings must adhere strictly to MIL-STD-129, and the delivery destination is the USS JOHN S MCCAIN DDG 56 at FPO AP 96672, with additional shipment protocols governed by DLAD procedural notes C19 and C20. The contract specifies zero variance in quantity, with inspection and acceptance occurring at the delivery point, and references a required delivery date of May 28, 2024, under solicitation SPE7M1-26-T-240E.
MARITIME SUPPLY CHAIN

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 335921
New
DIBBS
CABLE, FIBER OPTIC
Solicitation # SPE7M2-26-T-5879
The contract specifies the procurement of fiber optic cable under NSN 6015-01-442-9423, with a total quantity of 4,117 measurement units, to be delivered FOB origin within 105 days of contract award. The item is classified as a commercial item and a critical application item, requiring strict adherence to technical specifications including MIL-PRF-85045/18D and MIL-PRF-85045H, with part number M85045/18-01P. Supply compliance with DLA packaging standards under MIL-STD-2073-1E and preservation under MIL-DTL-12000 is mandatory, along with marking per MIL-STD-129 and palletization per DLA requirements. The contractor must ensure no mercury or mercury-containing compounds are introduced unless explicitly exempted for specific functional components, and all mercury-containing devices must meet NAVSEA 5100-003D containment standards. Material from General Cable Industries with lot codes between 0117 and 0821 and trace code 382893.000 with lot code 0619 are prohibited. The contract enforces CMMC Level 2 self-assessment requirements and incorporates DLA’s Master List of Technical and Quality Requirements. Inspection and acceptance occur at origin with zero tolerance for quantity variance. Delivery is directed to DLA District San Joaquin in Tracy, California, with a required ship date of July 23, 2026, and original delivery deadline of February 25, 2027. The item is subject to Qualified Products List or Qualified Manufacturers List controls, and all shipments must comply with DLA transportation notes C19 and C20.
NUCLEAR REACTOR PROGRAM

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 335921
DIBBS
CABLE ASSEMBLY, FIBE
Solicitation # SPE7M1-26-T-238V
This contract is for a single unit of a fiber optic cable assembly designated as NSN 6020-01-540-9930 under solicitation SPE7M1-26-T-238V, with delivery required within 20 days to the USS BULKELEY DDG 84 at FPO AE 09565. The item is classified as a critical application component and must be furnished by approved suppliers including Lockheed Martin Corporation and NewVac, LLC using part number 7572110-629. Strict prohibitions ban the use of Class I ozone-depleting chemicals and intentional addition of mercury or mercury-containing compounds, except for specific functional uses like batteries, fluorescent lights, sensors, or naval-specified reagents. Any mercury-containing portable devices must include shock-proof construction and a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 standards, using Method 10 for physical protection, with cable ends covered by neutral wrap and secured with tape. The cable must be wound on spools or reels of at least six inches in diameter, or coiled in a box meeting specified standards if not reel-compatible, with cushioning and proper bracing. All packaging must be marked in accordance with MIL-STD-129 and palletization must meet DLA procurement guidelines. The contract enforces zero variance in quantity and mandates inspection and acceptance at the destination. Technical and quality requirements are governed by the DLA Master List, and unit of issue conforms to DoD standards. The delivery deadline is June 18, 2026, with transportation details following DLAD procedural notes C19 and C20.
MARITIME SUPPLY CHAIN

POSTED

7 days ago

DEADLINE

in 5 days
View Details
NAICS: 335921
Federal
TELECOMMUNICATION CABLE SERVICES (FIBER/COPPER)
Solicitation # 70LGLY-SSB-RFI-CABLESERVICES
The solicitation seeks qualified vendors to provide comprehensive onsite telecommunications cable system support services for both inside plant and outside plant copper and fiber optic networks, serving Federal Law Enforcement Training Center locations in Artesia NM, Charleston SC, Cheltenham MD, and Glynco GA. The scope includes installation, maintenance, troubleshooting, testing, documentation, and lifecycle support for communication infrastructure encompassing cabling systems, communications rooms, handholes, manholes, and conduit networks that support critical voice, data, and network transport services. Vendors must demonstrate the capability to deliver mission-critical support in these geographically dispersed training facilities and understand the technical demands of maintaining both legacy and modern telecommunications infrastructure. All responses to this Request for Information are voluntary and at the respondent’s sole expense; the government will not reimburse any costs incurred during submission. Information provided will become the property of the government and will not be returned, and respondents must clearly mark any proprietary, restricted, or competitively sensitive data within their submissions. The RFI is not a solicitation for contracts but a means to identify capable sources for potential future procurement; non-response does not disqualify vendors from future opportunities. The solicitation number is 70LGLY-SSB-RFI-CABLESERVICES, with a response deadline of August 12, 2026, and is issued by the Federal Law Enforcement Training Center Glynco Procurement Office under the Department of Homeland Security. Primary and secondary points of contact are provided for inquiries, and NAICS code 335921 applies to this effort.
Fletc Glynco Procurement Office

POSTED

8 days ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 423510
New
DIBBS
STRIP, METAL
Solicitation # SPE7M0-26-Q-1147
This contract specifies the procurement of cold-rolled low-carbon steel strip, compliant with ASTM A109/A109M and SAE AMS2807C standards, measuring 0.0625 inches thick by 3 inches wide, in whole-foot lengths between 8 and 16 feet, with a weight of 0.638 pounds per foot and Edge Type No. 2. The material must be supplied as stripped metal with continuous identification markings on each unit, including the DLA contract delivery order number, NSN, specification revision, alloy and grade, manufacturer’s name, heat and lot number, and exact dimensions. Markings are required to be legible, waterproof, and applied via stamping or stenciling without contaminating the product; adhesive labels are permitted for bars, tubes, and shapes under 0.250 inches in nominal OD, while tags are acceptable for wire. A complete Certificate of Quality Compliance, or mill certification, must accompany every shipment and be submitted to the DLA Troop Support Contracting Officer. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD) as mandated by DLA Troop Support, and any deviation from this requirement constitutes a non-compliant bid with potential criminal penalties. Packaging and marking must conform to MIL-STD-2073-1E, MIL-STD-129, and ASTM A700, with special codes Z and ZZ for preservation and labeling. All items must be shipped in full-foot increments only, and shipments must exclude parcel post, using instead the fastest traceable freight method to the designated Puget Sound Naval Shipyard address. The contract is a firm-fixed-price agreement with zero variance allowance, destination inspection and acceptance, and FOB origin terms. Delivery is required within 30 days after award, and all technical data, including the CDRL-METALSCERT, must align with DLA’s Master List of Technical and Quality Requirements. Failure to meet any specification, including packaging, marking, or material certification, is grounds for rejection.
Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 7 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE7M0-26-T-031K
This contract specifies the procurement of electrical insulation tape meeting MIL-I-19166C revision C dated 02/26/2021, with a unit of issue of 1 RO equaling 108 feet, for a total quantity of 1,200 ROs. The item is classified as a commercial item and carries a shelf life of 12 months from manufacture, non-extendable, unless stored under controlled conditions of 50°F to 80°F and less than 75% relative humidity, in which case it may be inspected and re-certified up to a maximum of five years. It is designated as hazardous under HMIC code P, requiring full compliance with Safety Data Sheet (SDS) submission standards including hazard labels and a completed transmittal form to dscrchempol@dla.mil. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129R, with palletization conforming to DLA packaging requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required for acceptance unless otherwise directed; unspecified attributes are treated as major. The tape must qualify under QPL-19166-30 revision 30 and comply with all referenced technical and quality requirements from the DLA Master List. Delivery is FOB origin with a five-day delivery window to Pearl Harbor Naval Shipyard, Hawaii, and requires full compliance with DLA procurement notes for transportation and freight. The NSN is 5970-00-612-8492 with a required delivery date of July 31, 2026, and all documentation must reflect current DLA unit of issue and marking specifications.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332919
New
DIBBS
ELBOW, HOSE
Solicitation # SPE7M0-26-T-031Q
This contract pertains to the procurement of one elbow hose, identified by NSN 4730016175913 and part number FS2702-12-12-FG from Brennan Industries, with a total quantity of one unit. The item is designated as a critical application component, and all materials must strictly comply with DLA’s Master List of Technical and Quality Requirements, which take precedence over any other standards including ASTM D3951 and MIL-STD-129 for packaging and labeling. The use of Class I ozone-depleting chemicals is explicitly prohibited, and any alternative substitutes must be pre-approved unless already authorized under the specifications. Delivery is required within five days of contract award, with FOB origin terms, no variance in quantity allowed, and inspection and acceptance occurring at the destination. Packaging must adhere to DLA’s packaging requirements, including palletization and labeling per MIL-STD-129, with unit of issue and quantity per unit pack exactly as specified. Shipment must be sent via traceable freight methods, excluding parcel post, to the designated delivery point at 547 Philadelphia Avenue, Reading, PA, under RDD/ NMCS shipment directives. The contract number is SPE7M0-26-T-031Q, with a required delivery date of July 15, 2026, and the solicitation was posted on August 5, 2026, with responses due by August 17, 2026. The item falls under NAICS code 332919 and is procured by the Department of Defense through the Maritime Supply Chain ESOc Buys office.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M0-26-T-031N
This contract is for the procurement of one electrical contact component, identified by part number 3RT2036-1AN20 and NSN 5999017312005, manufactured by SIEMENS INDUSTRY, INC. The requirement is issued under solicitation SPE7M0-26-T-031N with a firm delivery deadline of five days after award and delivery must be FOB origin. The quantity is fixed at one unit with no tolerance for variance. Packaging and marking must strictly follow MIL-STD-2073-1E and MIL-STD-129 standards, with packaging codes and methods specified including preservative method 41, dry packaging, and D3 unit container with E5 intermediate container. The item must be palletized according to DLA packaging requirements and shipped via traceable freight methods—parcel post is prohibited. The delivery and freight address is Fort Stewart, Georgia, with the same recipient for mark for instructions. A technical and quality compliance requirement is incorporated by reference from the DLA Master List, and all supplies must comply with government identification removal protocols and physical marking standards. The contract includes government-only administrative codes and indicates an original required delivery date of June 10, 2026, though no ship date is specified. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, under a federal procurement framework managed by the Department of Defense and the Maritime Supply Chain ESOC.
Other Electronic Component Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
CORD, ELECTRICAL
Solicitation # SPE7M0-26-T-031J
The contract specifies the procurement of a single electrical cord with NSN/Part Number 6145-01-695-6822, requiring delivery within five days of award. The solicitation is issued under SPE7M0-26-T-031J with a response deadline of August 17, 2026, and was posted on August 5, 2026. This is a federal procurement under the Department of Defense through the Maritime Supply Chain ESOC Buys office, with performance required at Camp Lejeune, North Carolina, 28542-0088. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. Packaging must comply with DLA packaging requirements, and if the advice code is 2N, 28, or 34, the cord must be supplied in continuous length with no multiple unit packs; if 2P or 39, continuous length with multiple unit packs is acceptable, with the advice code superseding any conflicting schedule data. Any configuration changes require an engineering change proposal or variance request, and non-accepted supplies must have government identification removed. The alternate offeror must submit a complete data package including details for both the approved and alternate part. Primary point of contact is Abaigael Masterson at abaigael.masterson@dla.mil or 614-693-2532.
Saw Blade and Handtool Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332991
New
DIBBS
BEARING, STAVE SHAPED
Solicitation # SPE7M0-26-Q-1149
The contract specifies the procurement of 24 stave bearings, Class 3, Size No. 9, 1/16 inch oversize, 30 inches long, designed for use as an aft stern tube bearing assembly and manufactured to MIL-DTL-17901C with compliance to MIL-STD-129R and MIL-STD-2073-1E. Each stave is individually packaged in a unit package with no preservative required, wrapped in opaque or kraft paper to shield from sunlight, and enclosed in a weather-resistant single-wall fiberboard container with glued seams—no staples allowed. All units are overpacked in overseas-grade wooden boxes to ensure protection during transit and storage. Strict packaging rules prohibit bulk packaging, metal strapping directly on the staves, and any labeling on bare surfaces. The item is classified as a Type I shelf-life item with a non-extendable shelf life of 180 months and falls under the DLA Master List of Technical and Quality Requirements. The procurement prohibits ozone-depleting chemicals and mercury-containing compounds, with limited exceptions for specific functional uses mandated by NAVSEA. The delivery is FOB origin with a 30-day lead time, to be inspected and accepted at destination. The required sampling method follows MIL-STD-1916 or ASQ SPE7M0-26-Q-1149 with zero non-conformances permitted unless otherwise specified. Special marking “DO NOT BEND” must be applied to all unit containers, and shelf-life dates are to be indicated. The end user is the Egyptian Navy, with shipments routed through Amentum Warehouse in Fredericksburg, VA, and ultimately delivered to Ras El Tin, Alexandria. The contract mandates full and open competition and requires all technical and quality standards referenced from DLA’s eProcurement portal to be strictly adhered to. Substitutions for restricted materials require prior approval, and deviations must be formally requested through an Engineering Change Proposal. The item is identified by NSN 2010-01-209-9650 and is subject to a zero variance in quantity with delivery scheduled for early 2026.
Ball and Roller Bearing Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331221
New
DIBBS
STRIP, METAL
Solicitation # SPE7M0-26-Q-1148
The contract specifies the procurement of low-carbon cold-rolled steel strip measuring 0.0625 inches thick, 2 inches wide, and lengths between 96 and 192 inches, with a weight of 0.425 pounds per foot, as identified by NSN 9515-00-516-5739. The material must conform to ASTM A109/A109M and SAE AMS2807C standards, with temper 4 and finish 2, and must be supplied in whole-foot increments only. All units require continuous identification markings including the contract delivery order number, NSN, specification revision, alloy and temper details, manufacturer’s name, heat and lot numbers, and exact dimensions. Markings must be applied via stenciling or stamping, be legible, waterproof, and non-contaminating, while adhesive labels are permitted for narrow strips under 0.250 inches nominal OD. A Certificate of Quality Compliance, or mill material certification, must accompany each shipment and be forwarded to the DLA Troop Support Contracting Officer. The contract mandates strict compliance with the Qualified Suppliers List for Distributors (QSLD), restricting award eligibility exclusively to suppliers listed on the official DLA QSLD roster; any deviation or use of non-approved sources constitutes an unauthorized substitution and may result in criminal penalties. Packaging must follow MIL-STD-2073-1E and ASTM A700 specifications, with special codes Z and ZZ applied for preservation and marking as required. Markings must adhere to MIL-STD-129, including dual-unit quantities where applicable, and all shipments must avoid parcel post, instead using traceable freight methods. The delivery point is Puget Sound Naval Shipyard, with a firm fixed price and zero tolerance for quantity variance. Inspection and acceptance occur at destination, and the material must be delivered within 30 days after award. The contract also designates this item as a critical application, with a specific requirement for eight-foot continuous lengths for use on the USS Abraham Lincoln (CVN-72).
Rolled Steel Shape Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details