Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on January 25, 2023. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Electric-Hydraulic Automatic Tire Changer

Awarded
SP330023Q5007Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333998
New
SLED
NDSU - ASTM Type I and Type III Pure Water System Replacement
Solicitation # SRC000467
North Dakota State University is soliciting proposals under solicitation SRC000467 for the replacement of its existing pure-water treatment system. The project requires a qualified offeror to engineer, furnish, and install a complete, integrated ASTM Type I and ASTM Type III pure-water generation and distribution support system. Key deliverables include a 500-gallon Type III and a 250-gallon Type I storage tank, along with all necessary modular skid-mounted components, controls, instrumentation, and HMI with BAS/BMS interface capability. The successful contractor will be responsible for the entire lifecycle of the project, including design, factory testing, delivery, installation coordination, commissioning, and the provision of operator and maintenance training. Proposals must be submitted electronically via the NDBuys portal by November 17, 2026, at 2:00 PM CT. Submissions are required to be split into two separate envelopes: a technical proposal and a cost proposal. Award selection is based on a weighted scoring system where the technical proposal accounts for 80 points and the cost proposal accounts for 20 points. Mandatory requirements include a minimum of ten years of applicable experience. The project has a strict final completion deadline of June 15, 2027. Contractors must maintain insurance authorized in North Dakota with minimums of 500k/2M and certify they are not subject to federal debarment. All communications regarding this solicitation must be directed exclusively to the Procurement Officer, Casie Ewalt.

POSTED

about 5 hours ago

DEADLINE

in 14 days
NAICS: 333998
New
SLED
Supply of 4-Cylinder Reciprocating Engine Test Stand (Fuel Injection Version)
Texas State Technical College System

POSTED

about 5 hours ago

DEADLINE

in 21 days
NAICS: 333998
New
SLED
Supply of 4-Cylinder Reciprocating Engine Test Stand (Carburetor Version)
Texas State Technical College System

POSTED

about 5 hours ago

DEADLINE

in 21 days
NAICS: 333998
New
SLED
Hydraulic Rescue Tool Supply
Butts County Board of Commissioners

POSTED

about 5 hours ago

DEADLINE

in about 1 month
NAICS: 333998
New
DIBBS
Supply of Linear Directional Control Valves (NSN 4820-01-686-4616)This subcontract involves the manufacture or procurement of two linear directional control valves for the Defense Logistics Agency, specifically meeting the technical specifications of NSN 4820-01-686-4616 and DLA Master List requirements. The project demands precision machining and strict adherence to the Buy American Act. All items must be packaged according to MIL-STD-2073-1E and MIL-STD-129 standards for delivery FOB Destination to the USS Kansas City LCS 22. The contract is categorized under NAICS code 333998 and is managed through the Department of Defense. Interested parties must submit their responses by November 16, 2026. Performance of the contract will take place at FPO 96694.
Defense Logistics Agency

POSTED

about 8 hours ago

DEADLINE

in 13 days
NAICS: 333998
New
DIBBS
Electronic Shielding Gasket Supply (NSN 5999-01-374-3321)This subcontract involves the manufacture or procurement of two electronic shielding gaskets under NSN 5999-01-374-3321 for the DLA Weapons Support Active Devices Division. The gaskets are designed to prevent EMI/RFI interference and must be produced without the addition of mercury. Delivery is required FOB Origin to Fort Richardson, Alaska. Compliance requirements include quality assurance performed according to MIL-STD-1916 or ASQ H1331, and packaging that adheres to MIL-STD-2073-1E and MIL-STD-129. Additionally, the contractor must complete a CMMC Level 2 self-assessment to meet security standards. The response deadline for this opportunity is November 16, 2026.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 13 days
NAICS: 333998
New
DIBBS
SHAFT, SHOULDERED
Solicitation # SPE7L1-27-T-3324
Solicitation SPE7L1-27-T-3324 is a small business set-aside request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of six shoulder shafts, identified by NSN 3040-01-287-9131. The items must be manufactured in accordance with basic drawing 67346 481-200417 Revision B and reference drawing 67346 481-200417 Revision dated November 8, 2019. Delivery is required within five days after receipt of order, with shipping destined for Defense Systems and Solutions in Huntsville, Alabama. Inspection and acceptance will occur at the origin, and the manufacturer's quality system must comply with SAE AS9003 or ISO 9001. The contract incorporates stringent regulatory requirements, including CMMC Level 2 certification, DFARS safeguarding of covered defense information, and strict adherence to ITAR and EAR export controls. Packaging must follow MIL-STD-2073-1E and MIL-STD-129, with palletization governed by DLA requirement RP001. Additionally, the contractor must comply with the Buy American Act and the Berry Amendment regarding domestic material sourcing. Payment and invoicing are to be processed electronically through the Wide Area WorkFlow system, and the contractor must maintain an active registration in the System for Award Management.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

in 13 days
NAICS: 333998
New
DIBBS
TEST PAPER, CHLORINE
Solicitation # SPE2DH-27-T-0383
Solicitation SPE2DH-27-T-0383, issued by the DLA Troop Support Medical Supply Chain FSH, is for the procurement of one package of Insta-Test chlorine test paper (NSN 6640-01-566-7340). The required test strips must provide instant results and measure free chlorine from 0 to 10 PPM, bromine from 0 to 20 PPM, alkalinity from 0 to 180 PPM, pH from 6.8 to 8.4, and total hardness from 50 to 800 PPM. Each package consists of 12 blister-carded bottles containing 50 strips each, totaling 600 strips per unit of issue. Delivery is required within 5 days after receipt of order, with the shipping destination located in Blacklick, Ohio. The contract mandates strict adherence to Medical Marking Standard No. 1, which supersedes MIL-STD-129 for medical marking. Packaging must be commercial and include sealed unit containers to prevent damage, with palletization following DLA requirement RP001. Inspection and acceptance will occur at the destination per FAR 52.246-2. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. The award is subject to various federal regulations, including the Buy American Act, DFARS cybersecurity reporting requirements, and restrictions on covered defense telecommunications equipment. Evaluation of alternate products requires the submission of complete technical data, and items produced via additive manufacturing are ineligible for award.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 8 hours ago

DEADLINE

in 7 days
NAICS: 333998
New
DIBBS
VIEWER KIT, FREE WAT
Solicitation # SPE2DH-27-T-0388
Solicitation SPE2DH-27-T-0388, issued by the Department of Defense DLA Troop Support Medical Supply Chain FSH, seeks the procurement of one Free Water Detector Viewer Kit (NSN 6640-00-999-2786). The required equipment must feature a primary range of 0-20 PPM with an accuracy of 2 PPM, weighing 6 lbs and measuring 6 inches in height, 9-1/2 inches in width, and 5 inches in length. Delivery is required within 20 days after receipt of order to USS Pearl Harbor in FPO AP 96667, with FOB Destination terms. Bidders must specify the source and part number being supplied; any alternate part offers require a complete data package for evaluation. Parts produced via additive manufacturing are ineligible for award. The contract mandates strict adherence to medical packaging and marking standards, specifically Medical Marking Standard No. 1, which supersedes MIL-STD-129. Each unit must be enclosed in a sealed container and packed in commercial exterior shipping containers. Inspection and acceptance will occur at the destination per FAR 52.246-2. The procurement is subject to the Buy American and Balance of Payments Program (DFARS 252.225-7001) for quotes above the micro-purchase threshold and requires compliance with DFARS 252.204-7012 regarding the safeguarding of covered defense information. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Quotations are due by November 10, 2026.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 8 hours ago

DEADLINE

in 7 days
NAICS: 333998
New
DIBBS
STEERING GEAR
Solicitation # SPE7M4-27-T-2138
Solicitation SPE7M4-27-T-2138 is a small business set-aside issued by the DLA Weapons Support Fluid Handling Division for the procurement of one unit of steering gear, identified by NSN 2030016049514. The contract specifies a delivery timeframe of 185 days after award, with a required delivery date of May 21, 2027. Delivery is established as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contractor must adhere to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All shipments must be marked and labeled per MIL-STD-129 and palletized according to RP001. Environmental restrictions prohibit the intentional addition of mercury or the use of Class I ozone-depleting substances without written approval. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS 252.225-7001 regarding the Buy American and Balance of Payments Program.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

in 13 days
NAICS: 333998
New
DIBBS
NUT, UNION
Solicitation # SPE7M3-27-T-0587
Solicitation SPE7M3-27-T-0587, issued by the DLA Weapons Support Fluid Handling Division, is for the procurement of 12 units of Union Nuts (NSN 4730-01-391-3928). The items are identified as requiring a metal casting process for manufacture, which necessitates specific tooling. Delivery is required within 168 days, with an original required delivery date of April 9, 2027, and a need ship date of April 20, 2027. The contract is established as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The procurement is not a small business set-aside and falls under NAICS code 333998. Compliance requirements include adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Additionally, the contractor must comply with the Buy American Act, the Berry Amendment, and strict prohibitions against the intentional addition of mercury to hardware. Administrative requirements mandate the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. The solicitation incorporates various FAR and DFARS clauses, including those regarding cybersecurity safeguarding and the prohibition of covered telecommunications equipment.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

in 3 days
NAICS: 333998
New
DIBBS
SERVICE KIT, CENTRIFUGA
Solicitation # SPE7M1-27-T-1927
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

in 13 days

AI Contract Overview

Show more

The Department of Defense, through DLA Distribution, issued solicitation SP330023Q5007 for the procurement of one heavy-duty electro-hydraulic automatic tire changer. This contract was established as a 100 percent small business set-aside under NAICS code 322211 and utilized a firm fixed price award structure. The equipment is specifically designed for use with trucks, buses, tractors, agricultural machinery, and earth-moving equipment, requiring a 6-claw hydraulic chuck and wireless remote control capabilities while adhering to strict power and dimension constraints. The successful contractor was required to adhere to a 60-day delivery schedule to DLA Distribution Red River. The procurement process included detailed technical specifications and strict requirements for submission and palletization standards to ensure the equipment met the operational needs of the agency. The contract was managed by the DLA Distribution office located in New Cumberland, Pennsylvania.

General Info

Agency

Department Of Defense → DLA Distribution

Contract Value

$23,995.15

NAICS

333998 - All Other Miscellaneous General Purpose Machinery Manufacturing

Place of Performance

PA, USA

Set-Aside

NONE

Awardee

CAPITOL LOGISTICS LLC

Award Issued Date

Documents

2
DOC, High priority: read this first24 pages · rfq
High
DOCX, High priority: read this firstsow
High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Distribution
ContactsNo contacts available
OfficeNEW CUMBERLAND, PA, 17070-5008, USA
Organization / AgencyDepartment Of Defense → DLA Distribution
Office AddressNEW CUMBERLAND, PA, 17070-5008, USA
ContactsNo contact information available

Full Description

Show more
See Attachment

More opportunities from Department Of Defense → DLA Distribution

Same awarding agency

NAICS: 321920
New
Federal
Certified Pallet SupplierThis subcontract through DLA Distribution involves the manufacture and supply of certified, heat-treated winged pallets designed for prime contractors on Defense Logistics Agency supply contracts. The pallets must be constructed according to ANSI MH1, Part 9 standards and MD00100452, Revision C specifications, specifically for the shipment of tape cases. To meet international and Department of Defense requirements, all units must undergo heat treatment in accordance with DoD Manual 4140.65-M. The project falls under NAICS code 321920 and will be performed in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 10, 2026, for this Department of Defense requirement.
Wood Container and Pallet Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339940
New
Federal
Polypropylene Tape SupplierThis subcontract opportunity with DLA Distribution involves the supply of industrial-grade polypropylene tape for prime contractors. The required specifications include tape that is 3 inches wide by 1000 yards long, featuring a 1.8 mil thickness, 22 lbs tensile strength, and hot melt adhesive. The total order consists of 500 cases, with each case containing 4 rolls, delivered FOB Destination to New Cumberland. Eligible bidders must be authorized distributors or resellers and maintain FASCSA compliance in accordance with FAR 52.204-30. The solicitation was posted on November 3, 2026, with a response deadline of November 10, 2026. This procurement falls under NAICS code 339940 for the Department of Defense.
Office Supplies (except Paper) Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 322220
New
Federal
DDSP 6” X 8” labels
Solicitation # SP330027Q0024
Solicitation SP330027Q0024 is a request for quotation from DLA Distribution Acquisition Operations to establish a firm-fixed-price purchase order for 1,200 rolls of 6 by 8 inch thermal transfer labels. The labels are to be delivered to DLA Distribution Susquehanna in New Cumberland, Pennsylvania, within 60 days after receipt of order. This procurement is a 100 percent Woman Owned Small Business set-aside under NAICS code 322220. Per Amendment 0001, the Nonmanufacturer Rule applies, requiring nonmanufacturer resellers to provide labels produced by a qualified domestic small business manufacturer. The government will award a single contract on an all-or-none basis to the responsible quoter offering the lowest price that is technically acceptable. Evaluation factors include responsibility standards under FAR Part 9, price analysis, and past performance as measured by the Supplier Performance Risk System. Offerors must be registered in the System for Award Management and submit quotes electronically by November 6, 2026, at 12:00 PM EST. Required submission materials include a completed schedule of services and descriptive literature for any equivalent items. Invoicing and payment will be processed through Wide Area WorkFlow.
Paper Bag and Coated and Treated Paper Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 3 days
View Details
NAICS: 238290
New
Federal
Notice of Intent to Award a Sole Source Contract - DLA Distribution X-RAY Move
Solicitation # SP330026Q0015
DLA Distribution intends to award a firm-fixed-price purchase order for the relocation of one Rapiscan machine at DLA Distribution Susquehanna, Pennsylvania. This effort is being pursued on a sole-source basis with Rapiscan Systems, Inc. under FAR 6.103-1, as they are the only authorized provider capable of performing the move without voiding system warranties or risking personal injury and equipment damage. The procurement is classified under NAICS code 238290 and PSC N066, with a 100 percent small business set-aside. Interested contractors must submit qualifications and capabilities statements to Samuel Tustin by November 10, 2026, at 1:00 PM EST. If no affirmative responses are received, the award will be made to Rapiscan Systems, Inc. using FAR Part 12 procedures, with an anticipated award date of November 13, 2026. The contract will be administered by Christopher Robinson of DLA Distribution Acquisition Operations in New Cumberland, Pennsylvania.
Other Building Equipment Contractors

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 322220
New
Federal
6” X 8” Label SupplyThis subcontract is for the manufacture and supply of 6 by 8 inch labels to support prime contractors on DLA Distribution Susquehanna projects. The labels must be provided in specific packaging of 750 labels per roll and four rolls per case, with final delivery to the DLA Base Supply located in New Cumberland, Pennsylvania. To ensure compliance, the provider must adhere to the Buy American Act and follow all CUI handling requirements for documentation, while providing a DD250 or a signed Bill of Lading upon delivery. The opportunity is designated as a set-aside for SBA Certified Women-Owned Small Businesses under NAICS code 322220. Managed by the Department of Defense for DLA Distribution, the solicitation was posted on October 30, 2026, with a response deadline of November 6, 2026.
Paper Bag and Coated and Treated Paper Manufacturing

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 484220
New
Federal
Freight Transport for Packaging KitsThis small business set-aside subcontract involves the freight transport of bulk container kits for prime contractors supporting DLA supply contracts. The selected provider will be responsible for picking up kits from manufacturing facilities and ensuring secure transport to the DLA Distribution Anniston facility in Alabama using either flatbed or dry van vehicles. Key operational requirements include coordinating delivery schedules to adhere to a 60-day after receipt of order window and complying with DPAS ratings to ensure proper shipment prioritization. This effort falls under NAICS code 484220 and is managed under the Department of Defense for DLA Distribution.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

6 days ago

DEADLINE

in about 15 hours
View Details
NAICS: 322211
New
Federal
SPI Box (Container Kit) Manufacturer/SupplierThis subcontract opportunity is for a manufacturer and supplier to provide SPI box container kits for prime contractors supporting DLA Distribution Anniston projects. The selected vendor will be responsible for manufacturing corrugated or allied paper-based boxes and assembling kits in strict accordance with Special Packaging Instructions and specific salient characteristics. To ensure technical acceptability, the supplier must provide descriptive literature for any equivalent items proposed and deliver all completed kits directly to DDAA. The contract is designated as a total Small Business Set Aside under NAICS code 322211 for the Department of Defense. Awardees must comply with Buy American clauses and adhere to Defense Priorities and Allocations System ratings. Interested parties must submit their responses by November 4, 2026.
Corrugated and Solid Fiber Box Manufacturing

POSTED

6 days ago

DEADLINE

in about 15 hours
View Details
NAICS: 322211
New
Federal
DDAA SPI Container Kit
Solicitation # SP330027Q0016
Solicitation SP330027Q0016 is a request for quotation to establish a firm-fixed-price purchase order for SPI container kits to support DLA Distribution Anniston, Alabama. This acquisition is designated as a Small Business Set-Aside under NAICS code 322211, with a size standard of 1,250 employees. The government intends to award a single contract on an all-or-none basis using a Lowest Price Technically Acceptable (LPTA) selection process. Evaluation will be based on technical and administrative compliance, an acceptable or unacceptable rating for past performance, and the total overall lowest price for all priced contract line items. The contract requires strict adherence to military standards, specifically MIL-STD-2073-1 for packaging, preservation, and quality performance, and MIL-STD 129 for marking. Specific cleaning requirements include the use of MIL-PRF372 rifle bore cleaner and MIL-PRF-680 solvent. Deliveries must be completed within 60 days after receipt of order and require appointments via the Carrier Appointment System. Invoicing and payment will be processed through Wide Area WorkFlow (WAWF). Offerors must be registered in the System for Award Management (SAM) and include required Controlled Unclassified Information (CUI) markings on all quote pages.
Corrugated and Solid Fiber Box Manufacturing

POSTED

6 days ago

DEADLINE

in about 15 hours
View Details
NAICS: 236220
Federal
Construct Private Offices in Building 403
Solicitation # SP330027Q0008
The Defense Logistics Agency is seeking qualified Women-Owned Small Businesses for a minor construction project at DLA Distribution Susquehanna in New Cumberland, Pennsylvania. The project involves providing all necessary labor, materials, and equipment to construct four private offices of varying sizes within Building 403. This effort is classified under NAICS code 236220 for commercial and institutional building construction, with an estimated contract value between 100,000 and 250,000 dollars. This acquisition is a 100 percent set-aside for Women-Owned Small Businesses and will be awarded as a single firm-fixed price contract following FAR Part 12 procedures. Interested firms must be registered in the System for Award Management and submit their interest, contact details, UEI, and CAGE number to the acquisition specialist by November 4, 2026. The government intends to issue the Request for Quote directly to qualified vendors around November 9, 2026, with a proposed award date approximately 30 days thereafter.
Commercial and Institutional Building Construction

POSTED

16 days ago

DEADLINE

in about 17 hours
View Details
NAICS: 423430
Federal
Office Supplies & ConsumablesThis subcontract opportunity with the Department of Defense DLA Distribution focuses on the procurement of general office materials and consumables to support prime contractors. The scope of work includes the provision of printer toner, paper, stationery, and various general office devices and cartridges. The contract falls under NAICS code 423430 and was posted on June 12, 2026. Interested parties must submit their responses by the deadline of May 31, 2027, at 4:00 PM.
Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

5 months ago

DEADLINE

in 7 months
View Details
NAICS: 541512
Federal
IT & Communications InfrastructureThis subcontract for IT and Communications Infrastructure supports prime contractors on DLA Distribution projects within the Department of Defense. The scope of work focuses on the supply and implementation of warehouse communication technology, specifically the delivery of operational VoicePick systems and modernization of communications equipment. Key deliverables include the installation of voice-directed picking hardware and essential wireless network components. The project falls under NAICS code 541512 and has a response deadline of May 31, 2027.
Computer Systems Design Services

POSTED

5 months ago

DEADLINE

in 7 months
View Details
NAICS: 238220
Federal
Specialized Equipment Maintenance (Fire Control)This subcontract for Specialized Equipment Maintenance (Fire Control) supports prime contractors on DLA Distribution projects within the Department of Defense. The scope of work involves the comprehensive maintenance, repair, and rebuilding of critical fire suppression and control equipment, including fire extinguishers, sprinkler systems, and fire control panels, to ensure the delivery of certified operational systems. The project falls under NAICS code 238220 and was posted on June 12, 2026. Interested parties must submit their responses by the deadline of May 31, 2027, at 4:00 PM.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

5 months ago

DEADLINE

in 7 months
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 333998
Closed
Federal
59--ELECTRONIC MODULE,S, IN REPAIR/MODIFICATION OF
Solicitation # N0038323RB085
Navsup Weapon Systems Support

POSTED

almost 4 years ago

CLOSED

over 3 years ago
View Details
NAICS: 333998
Closed
Federal
66--NIGHT DISPLAY MODUL, IN REPAIR/MODIFICATION OF
Solicitation # N0038323RB084
Navsup Weapon Systems Support

POSTED

almost 4 years ago

CLOSED

over 3 years ago
View Details
NAICS: 333998
Closed
Federal
58--CONTROL,INTERFACE, IN REPAIR/MODIFICATION OF
Solicitation # N0038323QS162
Navsup Weapon Systems Support

POSTED

almost 4 years ago

CLOSED

over 3 years ago
View Details
NAICS: 333998
Closed
Federal
28--STARTER,AIRCRAFT,MA - AND OTHER REPLACEMENT PARTS
Solicitation # N0038323QS128
Navsup Weapon Systems Support

POSTED

almost 4 years ago

CLOSED

over 3 years ago
View Details
NAICS: 333998
Closed
Federal
59--RESISTOR,THERMAL - AND OTHER REPLACEMENT PARTS
Solicitation # N0038323QS127
Navsup Weapon Systems Support

POSTED

almost 4 years ago

CLOSED

over 3 years ago
View Details
NAICS: 333998
Closed
Federal
59--CIRCUIT CARD ASSEMB - AND OTHER REPLACEMENT PARTS
Solicitation # N0038323QTL59
Navsup Weapon Systems Support

POSTED

almost 4 years ago

CLOSED

over 3 years ago
View Details
NAICS: 333998
Closed
Federal
TUBE ASSY,SCAV OIL,
Solicitation # N0038323QS171
Navsup Weapon Systems Support

POSTED

almost 4 years ago

CLOSED

over 3 years ago
View Details
NAICS: 333998
Closed
Federal
GUIDE,TORQUEMETER S
Solicitation # N0038323QS168
Navsup Weapon Systems Support

POSTED

almost 4 years ago

CLOSED

over 3 years ago
View Details
NAICS: 333998
Closed
Federal
16--SIGNAL CONVERTOR
Solicitation # N0038323QN171
Navsup Weapon Systems Support

POSTED

almost 4 years ago

CLOSED

over 3 years ago
View Details
NAICS: 333998
Closed
Federal
61--CORD,ELECTRICAL
Solicitation # N0038323QF129
Navsup Weapon Systems Support

POSTED

almost 4 years ago

CLOSED

almost 4 years ago
View Details
NAICS: 333998
Closed
Federal
FUEL PROBE-MAIN
Solicitation # N0038323QN174
Navsup Weapon Systems Support

POSTED

almost 4 years ago

CLOSED

over 3 years ago
View Details
NAICS: 333998
Closed
Federal
NRP,BEARING A108
Solicitation # N0038323QN175
Navsup Weapon Systems Support

POSTED

almost 4 years ago

CLOSED

over 3 years ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS