Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Electro-Mechanical Actuator Supply

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply of three electro-mechanical actuators identified by NSN 4810-01-736-5020, manufactured to meet stringent military specifications and technical requirements established by the Defense Logistics Agency. These components are critical to defense systems and must comply with all applicable DLA standards to ensure operational reliability and interoperability in military environments. The award is classified as a subcontract under the NAICS code 334516, indicating it pertains to the manufacturing of other electronic components and equipment. The contract was posted on July 20, 2026, and is managed by the Department of Defense through the Defense Logistics Agency. While specific performance locations and point of contact details are not provided, the procurement is tied to the official DLA contract record identified by the number SPE7MC26P3155. The absence of set-aside designations suggests the opportunity is open to all eligible suppliers, with no preference given to small businesses or other categories. Delivery and compliance are expected to align with DLA’s logistical and quality assurance protocols for defense-critical hardware.

General Info

Supply of three military-grade electro-mechanical actuators under DLA contract SPE7MC26P3155.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

334516 - Analytical Laboratory Instrument ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply of 3 electro-mechanical actuators (NSN: 4810-01-736-5020) compliant with military standards and DLA technical requirements.

Similar Contracts

Same NAICS industry code

NAICS: 334516
New
SLED
Sole source notice for an Gas Cluster Ion Beam (Argon Source) SystemThe University of Mississippi is procuring a lone lonoptika GCIB 10S Gas Cluster Ion Beam (Argon Source) System through a sole source justification under FAR 6.302-1, with a total estimated value of $121,740. This acquisition is non-competitive due to the system’s unique and proprietary capabilities required to integrate with existing custom instrumentation in the Department of Chemistry & Biochemistry, including real-time cluster measurement, sample current imaging, and ultra-thin film sputtering over a precise 7x7 mm area—functions unmatched by any commercially available alternative. The solicitation, identified as Smart number 9270-27-R-RFIN-00001 and RFx 3150006943, was posted on July 20, 2026, with responses due by August 4, 2026, at 10:00 AM CST. All objections to the sole source status must be submitted by the deadline via email to solesource@olemiss.edu (with a copy to purchase@olemiss.edu), or via mail or hand delivery to the university’s procurement office in University, Mississippi, and must include full contact details and a statement of the objector’s capabilities to meet the technical requirements. The place of performance and acceptance is the university campus, where the system will be installed and operated. No standard FAR clauses, packaging or marking specifications, military standards, or evaluation factors are included in the solicitation, as the procurement relies solely on the technical necessity and exclusivity of the ion source model. The contract does not specify payment processes, accounting codes, invoicing systems, or delivery terms such as FOB, and no formal COR, COTR, or PCO is designated beyond Jeff Wells, Procurement Manager, who serves as the primary point of contact. Vendor representations, certifications, or socioeconomic status information are not applicable, as the procurement is not subject to small business set-asides or competition. The system will be delivered as a single unit with no options or line items, and acceptance will be based on meeting the defined technical performance criteria without reference to formal industry standards.
UNIVERSITY of MISSISSIPPI

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334516
New
DIBBS
Supply of ARM, SWITCH ACTUATOR (NSN 5930-01-298-3505)The contract involves the manufacture and supply of twelve precision electromechanical switch actuators fully compliant with the military National Stock Number (NSN) 5930-01-298-3505, ensuring adherence to stringent defense standards for performance, reliability, and environmental resilience. All units must meet exacting traceability requirements, including full documentation of materials, batch numbers, manufacturing processes, and quality control inspections to support military logistics and maintenance operations. Production is governed under NAICS code 334516, indicating specialized electronic component manufacturing, and the work is being procured as a subcontract under the Defense Logistics Agency, representing the Department of Defense’s centralized supply chain. The contract was posted on July 20, 2026, and is identified by the award reference SPE7M824V2252, though no solicitation number is provided, suggesting it may have been issued directly through a pre-qualified vendor channel. Place of performance and point of contact details are omitted from the record, but the work is intended to support DLA’s broader mission of equipping and sustaining U.S. military systems. The absence of set-aside information indicates the opportunity is open to any qualified supplier, regardless of business size or status, with the sole focus on technical compliance and fulfillment of military-grade specifications.
Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 334516
New
DIBBS
RF Interference Filter Manufacturing and TestingThe contract requires full lifecycle production, testing, and quality assurance of RF interference filters adhering to military specifications, encompassing design validation, environmental testing, and certification to ensure compliance with defense standards. All phases must be executed with strict adherence to technical requirements, including performance under extreme conditions, to guarantee reliability in operational environments. The work is scoped as a subcontract under the NAICS code 334516, with performance required at Tinker Air Force Base, Oklahoma, 73145-8000. Production must align with Department of Defense quality and documentation protocols, and all deliverables will be subject to rigorous inspection and approval processes before acceptance. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026, indicating a tight window for proposers to submit qualified bids. The contracting activity is managed by the Active Devices Division of the Department of Defense, and while no set-aside classification is specified, the nature of the work suggests a focus on specialized defense electronics manufacturing. The place of performance at Tinker AFB implies close coordination with military logistics and maintenance infrastructure, and successful contractors must demonstrate proven capability in high-reliability RF component production, with relevant experience in military-grade supply chains.
ACTIVE DEVICES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334516
New
DIBBS
WATER TESTING KIT, BThe contract pertains to the procurement of six Water Testing Kits, Bacteriological, identified by NSN 6665-00-682-4765 and part numbers XX63WTK00 and TRM101202, for delivery to DLA Distribution Cherry Point in North Carolina. The kits are designed for North American 115V/60Hz electrical standards with no adapter provided for European 220V/50Hz use. Each unit must be accompanied by two copies of a technical manual compliant with MIL-M-7298 detailing installation, operation, and maintenance procedures, along with component lists. The contractor must submit two preliminary manuals to the Director of Medical Materiel for review within 30 days of contract award, allowing time for revisions before final delivery. Fifteen approved copies of the manual must be provided to the contracting officer unless a waiver is granted based on previously accepted identical manuals within the prior two years. The kits are classified as a critical application item and must be packaged and marked in strict accordance with MIL-STD-2073-1E Appendix D for kits and MIL-STD-129 for marking, with preservation and packaging methods specified under DLA Packaging Requirements. No quantity variance is permitted, and delivery is FOB origin with inspection and acceptance occurring at destination. The required delivery date is 168 days from contract award with an original deadline of September 21, 2026, and a needed ship date of January 5, 2027. The contract references multiple DLA technical and quality requirements identified by R and I numbers, with compliance governed by the DLA Master List in effect at the time of solicitation. Transportation and hazardous materials handling must follow DLAD Proc Notes C19 and C20, and the contract was solicited under DIBBS with a response deadline of July 23, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334516
New
DIBBS
MEASURING TUBE, GAS ANAThe contract is for the procurement of 14 packages of Measuring Tubes for Gas Analyzer, NSN 6630-12-189-3126, each package containing 10 units, designed to measure carbon dioxide content between 100 and 3000 parts per million in compressed gases. The tubes are glass with melted tips and must comply with strict packaging, labeling, and shelf-life requirements. Each unit must have a non-extendable shelf life of 24 months, with no more than three months elapsed from manufacture to government delivery, and all labels must include the date of manufacture, expiration date, contract number, and lot number in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129 for medical items. Packaging and palletization must meet DLA’s RP001 requirements and ASTM D3951 standards, with barcoding per MIL-STD-129 to support automated logistics tracking. Delivery is FOB destination to military vessel addresses in FPO, with a 20-day delivery window from order receipt and a fixed delivery deadline of July 22, 2026. Inspection and acceptance occur at the destination, governed by FAR 52.246-2. The solicitation is for a fixed-price contract under SPE2DH-26-T-5302, issued on July 20, 2026, with responses due by July 27, 2026. All bids must be submitted electronically through the DLA Internet Bid Board System, and contractors must comply with federal acquisition regulations including cybersecurity safeguards, trafficking in persons prohibitions, hazardous material labeling, and employment eligibility verification. Technical and quality specifications from the DLA Master List of Technical and Quality Requirements apply, and the item is subject to restrictions on the use of covered defense telecommunications equipment. The contracting office is the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact. Pricing details are not provided in the solicitation, and no contract value is stated, despite nine line items totaling 14 packages. Small business representation is required under FAR 52.219-28, and offerors must provide Unique Entity Identifiers and CAGE codes via SAM if applicable.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 423840
New
DIBBS
Packaging and Marking of Military-Grade ComponentsThe contract requires the provision of packaging and marking services for electrical connectors in strict compliance with MIL-STD-2073-1E for packaging standards and MIL-STD-129 for item marking, all in support of the Defense Logistics Agency. The components are destined for military use under the Department of Defense and must meet exacting federal specifications to ensure durability, traceability, and logistical compatibility across the defense supply chain. The work is structured as a subcontract under NAICS code 423840, which pertains to wholesale trade of electronic components and equipment, indicating the scope is focused on preparation and shipment readiness rather than manufacturing. Performance is expected to align with DLA’s standards for federal supply systems, though no specific location for performance or point of contact is listed. The solicitation is posted under contract SPE7M126V050N and was published on July 20, 2026, with no set-aside provisions indicated, meaning it is open to all qualified subcontractors. Full adherence to military standards is critical, as non-compliance could result in rejection of shipments, delays in delivery, or financial penalties. All packaging must preserve the integrity of the connectors during transport and storage, while marking must include universally recognized DOD identifiers, barcodes, and data matrix codes to enable automated receipt and inventory management at military depots worldwide.
Industrial Supplies Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 493190
New
DIBBS
Inspection, Packaging, and Marking of Reconditioned ElectronicsThe contract pertains to the final inspection, preservation, packaging, and labeling of reconditioned circuit card assemblies to ensure full compliance with military packaging and marking standards. This effort is critical to maintaining the integrity, functionality, and traceability of electronic components used in defense systems, requiring strict adherence to established federal and military specifications throughout every phase of handling. The work involves detailed quality control procedures to verify that each assembly meets performance criteria prior to being preserved against environmental degradation, securely packaged, and accurately labeled in accordance with mandated military protocols. This subcontract is issued under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code 493190 for other warehousing and storage. The solicitation was posted on July 20, 2026, and the place of performance is not specified, suggesting the work may be conducted at any approved contractor facility capable of meeting the rigorous defense standards. The contract's purpose is to support the sustainment and readiness of military electronics by ensuring that reconditioned components are handled, stored, and shipped with the same precision and reliability as new units, thereby reinforcing the logistical backbone of defense operations.
Other Warehousing and Storage

POSTED

about 20 hours ago

DEADLINE

N/A
View Details