Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

ELECTRODE, ELECTROCARDI

Active
SPE2DS-26-T-261JFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 2 packages of disposable electrocardiograph electrodes, each package containing 30 units, for a total of 60 electrodes. Each electrode has a 2.25-inch diameter, features a pregelled pressure-sensitive adhesive-coated foam pad with the electrode centered, and must meet commercial packaging standards as specified in the procurement document. All units must be sealed in suitable containers that protect against damage and be shipped in commercial exterior containers capable of safe delivery via common carrier at the lowest rate. Marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard are available through DLA Troop Support. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. The packaging and handling must adhere to DLA packaging requirements, and government identification must be removed from non-accepted supplies. The item is identified by NSN 6515-01-035-6483 and is covered under solicitation SPE2DS-26-T-261J, with a response deadline of July 28, 2026, and a delivery requirement within 20 days of award. Bidders must specify the source and part number being supplied. The contract falls under NAICS code 334510 and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF, with Brooke Webb as the primary point of contact.

General Info

Procure 60 disposable ECG electrodes, 2.25-inch, pregelled, compliant with DLA and NSN 6515-01-035-6483, delivered within 20 days of award.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

334510 - Electromedical and Electrotherapeutic Apparatus ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-261J.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
BROOKE WEBB
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ELECTRODE,ELECTROCARDIOGRAPH
ELECTRODE, ELECTROCARDIOGRAPH
FEATURES 2.25 IN DIA<(>,<)> PREGELLED PRESSURE SENSITIVE ADHESIVE COATED
FOAM PAD, DISPOSABLE, ELECTRODE IN CENTER
UNIT OF ISSUE: PG (30 EA PER PACKAGE)
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
.. BIDDER: PLEASE SPECIFY SOURCE AND PART NUMBER BEING SUPPLIED.
SPE2DS-26-T-261J
SECTION B
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-035-6483 Quantity: 2 PG Purchase Request: 7017578622QTY: 2 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334510
New
SLED
Cinemavision MRI video and audio system is the only MRI patient entertainment system on the market that offers both a combined video and audio experience for the MRI patient. The patient video goggles block the view of the MRI bore and head coil and preseThe University of Mississippi Medical Center is procuring the Cinemavision 20/20 MRI Patient Digital Video and Audio Entertainment System through a sole source procurement under Solicitation Number 9275-27-R-RFIN-00004, with a response deadline of August 5, 2026. The system, exclusively offered by Cinemavision LLC, is designed to enhance patient comfort during MRI scans by providing synchronized video and audio through MRI-compatible goggles and a headset with 35dB noise reduction, enabling immersive distraction therapy that reduces claustrophobia and the need for sedation, particularly in pediatric patients. The procurement, estimated at $79,000 over a three-year period, includes the full system, on-site staff training, and integration with existing MRI equipment, with performance and delivery occurring at the UMMC campus in Jackson, Mississippi. The system must feature fiber-optic connectivity, non-magnetic materials, and a two-way communication capability to allow real-time interaction between patients and technicians, with remote control and transducer functionality for patient-initiated alerts. Inspection and acceptance will be conducted by UMMC upon delivery, with no formal industry standards cited, but functional requirements tied directly to the sole-source justification that this is the only system on the market combining these capabilities. The acquisition is justified solely due to the proprietary and unique nature of the Cinemavision system, with no competitive solicitation or evaluation factors utilized. No contract clauses, packaging or marking specifications, bar-coding standards, or military standards are referenced. Submission of proposals is required via email to solesource@umc.edu or physically to specified addresses in Jackson, MS, with an objection process open for ten business days following public notice. No representations, certifications, or socioeconomic data from the vendor are provided, and payment, invoicing, and accounting details such as TAS, ACRN, or COR contact information are not specified in the documentation.
UNIV of MS MEDICAL CENTER

POSTED

about 19 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334510
New
DIBBS
Supply of Chlorine Photometer Water Testing KitsThe contract seeks the procurement and delivery of commercial off-the-shelf chlorine photometer pocket kits designed for water testing, adhering strictly to the National Stock Number NSN 6630-01-637-2488 and Department of Defense Logistics Agency packaging standards. These kits are intended for field use in monitoring water safety and must meet specified technical and durability requirements to ensure reliable operation under operational conditions. The solicitation is issued as a subcontract under NAICS code 334510, which aligns with the manufacturing of measuring and testing instruments, and the delivery must be performed to the designated military address in APO with ZIP code 09898. The opportunity was posted on July 22, 2026, with a response deadline of July 29, 2026, granting vendors a one-week window to submit proposals. The contracting entity is the Medical Supply Chain FSH under the Department of Defense, indicating the end-use is for medical or field health support applications. All submissions must comply with DLA packaging guidelines to ensure compatibility with military logistics systems, and the kits must be readily available as commercial items without custom modifications. The procurement is not set aside for any specific small business category, and interested parties must access the full solicitation through the provided DIBBS link.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334510
New
DIBBS
RF Interference Filter Manufacturing & SupplyThe contract requires the manufacture and supply of radio frequency interference filters that comply with stringent military and federal standards including MIL-STD-1916, ASTM D3951, and FED-STD-313. All units must adhere to detailed technical specifications as well as packaging and labeling requirements mandated by the Defense Logistics Agency to ensure uniformity, traceability, and readiness for military use. The products are intended for integration into defense systems where electromagnetic compatibility and environmental resilience are critical. The solicitation is classified as a subcontract under NAICS code 334510, posted by the Maritime Supply Chain under the Department of Defense, with responses due by August 6, 2026. Performance location and specific delivery details are not specified in the provided data, but compliance with DLA standards will govern all aspects of production, documentation, and shipment. All bidders must ensure full alignment with the referenced standards and the contractual obligations tied to military procurement protocols.
MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334510
New
DIBBS
Material Supply for Mercury-Containing Defense EquipmentThe contract pertains to the supply of mercury-containing components, specifically relays and switches, for defense equipment under stringent compliance with NAVSEA 5100-003D standards for handling, labeling, and documentation. This subcontract requires vendors to ensure all mercury-bearing parts meet exacting military specifications to safeguard personnel and the environment throughout the product lifecycle. The place of performance is designated as Tracy, California, with a zip code of 95304-5000, indicating where the delivered materials must be delivered or where work must be executed. The solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026, and falls under NAICS code 334510, which covers the manufacture of electronic components and accessories. The contracting agency is the Department of Defense, operating through the Construction & Equipment T & IFO EQ office. Although the solicitation number is not provided, the official interface for submissions and inquiries is accessible via the DIBBS portal. All participants must adhere to federal defense procurement protocols, and failure to comply with mercury handling regulations could result in rejection or disqualification.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334510
New
DIBBS
Salinity Detector Cell SupplyThe contract pertains to the supply of three NSN-compliant salinity detector cells, with all items required to meet full military standards for packaging, labeling, and hazard communication. The procurement is classified as a subcontract under NAICS code 334510 and is managed by DLA Dist San Joaquin under the Department of Defense. Performance of the contract is designated to occur in Tracy, California, with a ZIP code of 95304-5000. The solicitation was posted on July 22, 2026, and responses must be submitted by August 3, 2026. All deliverables must adhere strictly to military specifications to ensure compatibility and safety in operational environments.
DLA DIST SAN JOAQUIN

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334510
New
DIBBS
Small Business and Socioeconomic RepresentationSmall businesses, including those certified as small disadvantaged businesses, women-owned small businesses, service-disabled veteran-owned small businesses, and HUBZone firms, are invited to participate in subcontracting opportunities tied to supply chain and compliance activities under a solicitation issued by the Department of Defense through its Construction & Equipment T & IFO EQ office. The opportunity is linked to NAICS code 334510, indicating involvement in the manufacturing of electronic components and boards, and performance is designated for New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 22, 2026, and responses are due by August 3, 2026, allowing eligible firms a limited window to submit their qualifications. This subcontracting initiative is designed to expand socioeconomic representation within the defense supply chain, providing certified small businesses a pathway to engage in critical operational and logistical roles. Interested parties can access further details and submit responses through the official DIBBS portal using the provided link.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334510
New
DIBBS
Supply of Neutral Density Filter AssemblyThe contract seeks the procurement and delivery of six neutral density filter assemblies that must comply with military packaging, marking, and hazardous materials standards, ensuring full adherence to defense logistics requirements. These assemblies are intended for use in specialized equipment under the jurisdiction of the Department of Defense, with performance occurring at a designated location in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation falls under NAICS code 334510, indicating it pertains to the manufacturing of optical instruments and lenses, and is classified as a subcontract opportunity. Responses are due by August 3, 2026, with the request for quotation posted on July 22, 2026. All submitted proposals must meet stringent regulatory and technical specifications tied to military-grade handling and transportation of materials. While no set-aside criteria are specified, the contracting activity is managed by the Construction & Equipment T & IFO EQ office, and interested parties can access additional details through the official DIBBS platform using the provided link. The requirement emphasizes reliability, compliance, and precise execution in alignment with defense supply chain protocols.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334510
New
DIBBS
OXY Sensor Supply and DeliveryThe contract calls for the procurement and delivery of four commercial oxygen sensors with NSN 4610016209908 and part number OX-SEN-6800, all of which must fully comply with Department of Defense technical specifications, packaging protocols, and military labeling standards. Each unit must be delivered in a clean, dry condition and adhere to all applicable hazardous material handling, transport, and preservation requirements to ensure operational readiness and safety. The sensors are intended for use by the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, with performance to be carried out at the location in NEW CUMBERLAND, Pennsylvania, zip code 17070-5002. The solicitation, classified as a subcontract under NAICS code 334510, was posted on July 22, 2026, and requires responses no later than August 3, 2026. All submissions must meet the defined military compliance criteria without exception to qualify for award.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334510
New
DIBBS
Soldering Station Manufacturing and AssemblyThe contract requires the manufacture, assembly, and testing of 15 precision temperature-controlled soldering stations that meet strict military and Defense Logistics Agency standards, specifically conforming to CID A-A-59284 and NAVSEA 5100-003D. Each unit must be built to exacting specifications to ensure reliability and performance in defense-related applications, with all work subject to rigorous quality control and verification procedures. The stations are intended for use in maintenance, repair, and overhaul operations, necessitating consistent thermal accuracy and durability under operational stress. This is a subcontract opportunity under NAICS code 334510, with performance required at Tinker Air Force Base, Oklahoma, zip code 73145-8000. The solicitation was posted on July 22, 2026, and responses are due by August 3, 2026, indicating a tight turnaround for proposals. The contracting activity falls under the Department of Defense via the Construction & Equipment MRO SVC I office, and the procurement is managed through the DIBBS system with the reference number SPE8E926T3218. All bidders must be prepared to demonstrate compliance with applicable military standards and capacity to deliver fully tested, defect-free units within the specified timeline.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334510
New
DIBBS
Supply of Position Feedback Arm (NSN: 6320013438191)The contract calls for the supply and delivery of one precision feedback arm identified by NSN 6320013438191, manufactured to meet stringent military specifications and packaging standards required for defense applications. The item must also comply with cybersecurity protocols for handling covered defense information, ensuring secure data practices throughout its lifecycle. This subcontract is part of a broader initiative by the Department of Defense through the AVIATION SUPPLY CHAIN ESOC BUYS to support critical aviation systems, with delivery required at Fort Stewart, Georgia, under the NAICS code 334510 for aerospace product and parts manufacturing. Bidders must submit responses by the deadline of July 30, 2026, and the procurement is managed through the DLA DIBBS platform, with no set-aside provisions specified.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334510
New
DIBBS
Digital Data Coupler Manufacturing and AssemblyThe contract requires the full production of 44 digital data coupler units identified by NSN 7025-01-349-6128, encompassing all phases from design validation through final assembly, quality assurance, and packaging. Manufacture must strictly adhere to the SAE AS9003 and ISO 9001 standards to ensure rigorous quality control and compliance with aerospace and defense industry requirements. The work is classified as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 334510 indicating the industry category for electronic component and product manufacturing. Performance is mandated to occur at New Cumberland, Pennsylvania, with a zip code of 17070-5002, and all deliverables must meet the technical and procedural expectations defined by the Department of Defense's Construction & Equipment T & IFO EQ office. The solicitation was posted on July 22, 2026, with proposals due by August 3, 2026, providing a window of approximately two weeks for qualified small businesses to submit responses.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334510
New
SLED
Bluetooth Hands-Free Communication System SupplyThe City of Cartersville is seeking suppliers to provide six OEM-integrated Bluetooth hands-free communication systems designed for in-vehicle use, targeting seamless integration into automotive platforms for safe and efficient driver communication. The contract is classified as a subcontract under NAICS code 334510, which covers communication equipment manufacturing, indicating the required systems must meet original equipment manufacturer specifications for compatibility, durability, and performance within vehicle environments. The solicitation was posted on July 22, 2026, with a firm response deadline of August 6, 2026, at 7:00 PM, leaving a narrow window for qualified vendors to submit proposals under tight timelines. The place of performance and specific delivery location are not detailed, suggesting the systems may be delivered to a central facility or distributed across multiple City of Cartersville vehicles as needed. All bids must align with OEM integration standards, ensuring no aftermarket modifications are permitted, and vendors are expected to demonstrate proven experience in supplying similar embedded automotive communication technologies.
City of Cartersville

POSTED

about 20 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 541611
New
DIBBS
Regulatory and Quality Compliance SupportThis contract seeks consulting support to ensure compliance with FDA regulations, Department of Labor technical requirements, DFARS clauses, and Controlled Unclassified Information handling protocols. The work is being performed under a subcontract with the Medical Supply Chain MD Surg FSF, a division of the Department of Defense, and is focused on maintaining regulatory adherence across sensitive operational environments. The performance location is designated as APO, 09227-0000, indicating a military postal address, likely supporting defense or medical logistics operations overseas or in secure facilities. The solicitation is open for responses until July 28, 2026, with a posting date of July 22, 2026, indicating a short window for qualified vendors to submit proposals. The North American Industry Classification System code 541611 designates the nature of the work as management consulting services, specifically targeting regulatory and quality assurance expertise. There is no set-aside designation, so all eligible contractors may apply, and the work requires a clear understanding of federal contracting rules, medical device compliance, and secure information handling standards to meet DoD expectations.
Administrative Management and General Management Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 5 days
View Details
NAICS: 484220
New
DIBBS
Medical Device Logistics and Military Shipment HandlingThe contract requires coordination of domestic delivery for tracheal tubes, ensuring full adherence to military marking standards, inspection protocols, and WAWF reporting procedures. All shipments must comply with Department of Defense logistics specifications, with performance centered at the APO zip code 09227-0000, indicating delivery to military overseas locations through designated transit points. The contractor must handle all aspects of domestic transport with precision to meet the stringent documentation and traceability requirements inherent in military medical supply chains. This is a subcontract under NAICS code 484220, categorized as a medical device logistics and military shipment handling task, posted by the Medical Supply Chain MD Surg FSF within the Department of Defense. The solicitation, issued on July 22, 2026, requires responses by July 28, 2026, and must be submitted through the DIBBS portal. Failure to meet compliance with military marking, inspection, or WAWF systems will render delivery unacceptable, making procedural accuracy as critical as timely transport in fulfilling contractual obligations.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

in 5 days
View Details
NAICS: 326199
New
DIBBS
Sterile Medical Packaging and Labeling ServicesThe contract requires the delivery of sterile barrier packaging engineered to preserve integrity throughout the entire shelf life of medical devices, ensuring protection against contamination and environmental degradation. Packaging must meet stringent military and healthcare standards for sterility and durability under operational conditions. Alongside the packaging, compliant labeling is mandatory and must include precise depth markings for surgical tools, federally mandated hazard warnings, and all required military logistics identifiers to support tracking, inventory management, and field deployment. The work is scoped as a subcontract to support the Department of Defense's Medical Supply Chain under the MEDICAL SUPPLY CHAIN MD SURG FSF, with performance designated at APO 09227-0000. All submissions must be received by July 28, 2026, and the work falls under NAICS code 326199 for other plastic product manufacturing.
All Other Plastics Product Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
Sterile Tracheal Tube ManufacturingThe contract calls for the manufacture of sterile tracheal tubes equipped with specific medical features including radiopaque material for visibility under imaging, precise depth graduations for accurate placement, a beveled tip to facilitate insertion, a Murphy eye to ensure patency, and a high-volume low-pressure cuff to minimize tracheal damage. All units must meet stringent medical specifications and comply with defined shelf life requirements to ensure safety and efficacy during use. Production and delivery timelines are strictly enforced, requiring timely fulfillment to align with operational medical needs. The contract is solicited as a subcontract under the NAICS code 339112, targeting suppliers capable of meeting the technical and quality benchmarks for medical device manufacturing. It is managed under the Department of Defense’s Medical Supply Chain division with the place of performance listed as APO 09227-0000. The solicitation was posted on July 22, 2026, with a firm response deadline of July 28, 2026, leaving a narrow window for interested parties to submit proposals. The contract is part of a broader effort to secure reliable, high-quality airway management devices for military medical operations.
Surgical and Medical Instrument Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 5 days
View Details
NAICS: 541380
New
DIBBS
Quality Compliance and Safety Reporting
Testing Laboratories and Services

POSTED

about 20 hours ago

DEADLINE

in 5 days
View Details
NAICS: 484220
New
DIBBS
Logistics and Delivery to Destination (Philadelphia, PA)
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339920
New
DIBBS
Medical Packaging and Preservation Services
Sporting and Athletic Goods Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
Surgical Suction Tubing Supply (72-inch Clear Plastic Tubing)
Surgical and Medical Instrument Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 5 days
View Details
NAICS: 541611
New
DIBBS
Small Business Subcontracting and Compliance SupportThe contract seeks administrative support services to ensure small businesses remain compliant with U.S. government programs designed to promote minority and disadvantaged enterprise participation, specifically focusing on eligibility for SBA certifications including 8(a), Women-Owned Small Business (WOSB), HUBZone, and Service-Disabled Veteran-Owned Small Business (SDVOSB). The contractor will be responsible for managing the full lifecycle of compliance tasks, including accurate and timely registration and maintenance of SAM.gov profiles, preparation of required documentation, and ongoing reporting to meet federal standards. This support is critical for enabling small businesses to qualify for and retain access to federal contracting opportunities under these designation programs. The work is scoped under NAICS code 541611 for Management Consulting Services and is tied to the Department of Defense through the Medical Supply Chain MD Surg FSF. Performance is required in Clearwater, Florida, with a zip code of 33762-3502, and the opportunity is structured as a subcontract with a response deadline of July 28, 2026. While no set-aside designation is specified, the nature of the services directly supports small business federal participation goals. The contract is open for proposals through the DIBBS platform, and successful bidders must demonstrate proven experience in navigating federal compliance systems and a clear understanding of SBA program requirements and documentation protocols.
Administrative Management and General Management Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 5 days
View Details
NAICS: 323113
New
DIBBS
Medical Supply Packaging and Preservation ServicesThe contract requires the provision of sterile barrier packaging, preservation, and marking services for medical syringes, fully compliant with DLA MMS No. 1 and MIL-STD-2073-1E standards, ensuring product integrity and readiness for military medical use. All work must be performed to meet strict defense logistics requirements for packaging, labeling, and environmental protection throughout the supply chain, with a designated place of performance in Clearwater, Florida, under the oversight of the Department of Defense’s Medical Supply Chain MD Surg FSF. The solicitation is structured as a subcontract with a response deadline of July 28, 2026, and is categorized under NAICS code 323113, which corresponds to medical equipment and supplies manufacturing. The contract will be administered through the DIBBS platform, and all parties are expected to adhere to federal procurement protocols without any specific set-aside provisions identified. Timely submission of proposals that demonstrate technical compliance, quality control procedures, and proven experience in handling sensitive medical devices is critical for consideration.
Commercial Screen Printing

POSTED

about 20 hours ago

DEADLINE

in 5 days
View Details
NAICS: 541620
New
DIBBS
Medical Device Labeling and Hazard Communication ComplianceThe contract requires the development and provision of hazard warning labels and Material Safety Data Sheets (MSDS) for medical syringes, ensuring full compliance with OSHA’s Hazard Communication Standard and Defense Federal Acquisition Regulation Supplement (DFARS) requirements. The deliverables must accurately communicate chemical hazards associated with the syringes, aligning with federal safety and labeling protocols to support safe handling, storage, and use within military and healthcare environments. All documentation and labeling must be technically accurate, properly formatted, and updated to reflect current regulatory standards, with an emphasis on clarity and consistency across all supplied materials. This subcontract is issued under NAICS code 541620 and is performance-based at the specified location in Clearwater, Florida, with a ZIP code of 33762-3502. The opportunity was posted on July 22, 2026, and responses are due by July 28, 2026. The contracting activity is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF, indicating alignment with Defense Logistics Agency procurement systems and stringent compliance expectations for subcontractors serving federal medical supply chains.
Environmental Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
Sterile Medical Syringe Manufacturing and PackagingThe contract requires the manufacture and packaging of 60 ml dual-graduated catheter-tip syringes in sterile, rigid packs containing 20 units each. All products must be individually sealed, meet FDA compliance standards, and adhere to DLA technical specifications to ensure safety, functionality, and consistency in medical applications. The syringes are intended for use in controlled healthcare environments and must be produced under strict quality control protocols to maintain sterility and regulatory integrity throughout production and packaging. The contract is classified as a subcontract under NAICS code 339112 and is issued by the Department of Defense through the MEDICAL SUPPLY CHAIN MD SURG FSF division. The place of performance is designated as Clearwater, Florida, with a zip code of 33762-3502, indicating where final assembly, sterilization, or packaging must occur. The solicitation was posted on July 22, 2026, and bids must be submitted no later than July 28, 2026, offering a six-day window for interested parties to respond. The procurement is part of a larger defense medical logistics effort to secure reliable, high-quality medical devices for federal use.
Surgical and Medical Instrument Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 5 days
View Details