This Solicitation opportunity from Department Of Defense was posted on July 2, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

ELECTRODE,WELDING

Closed

N0010426QAC34Federal

Submission Closed07/17/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333998

New

DIBBS

PARTS KIT, FLUID PRESSU

Solicitation # SPE7M1-26-U-5566

Solicitation SPE7M1-26-U-5566 is a total small business set-aside for an indefinite delivery contract with a one year period, issued by the Defense Logistics Agency for the procurement of fluid pressure filter parts kits. The requirement specifies General Motors LLC 7X677 part number 24210956, with an estimated annual quantity of 3,515 units and a guaranteed contract minimum of 527 units. The contract has a maximum value of 350,000 dollars and requires a delivery period of 81 days. The government reserves the right to make multiple awards, with the best value offeror receiving at least 60 percent of the total requirement. Technical compliance requires adherence to DLA master lists and specific packaging standards, including MIL-STD-2073-1 Appendix D for kits and MIL-STD-129 for marking. Inspection and acceptance will occur at the destination, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Offerors must submit quotes via DIBBS and are prohibited from using additive manufacturing processes unless authorized. The contract incorporates various FAR and DFARS clauses, including requirements for combating trafficking in persons, safeguarding covered defense information, and compliance with the Buy American Act. Payment and invoicing must be processed through the Wide Area WorkFlow system.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Vibra-Coring System Supplier

Ofc Of Acqusition Grants-National

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-10Z2

This solicitation, identified as SPE7L1-26-T-10Z2, is issued by the Department of Defense Land Supply Chain for the procurement of 81 fluid filters under NSN 2940-00-080-7522. The contract is designated as a total small business set-aside under NAICS code 333998, with a required delivery timeframe of 168 days after order. Performance is centered in New Cumberland, Pennsylvania. The agreement incorporates strict technical and quality standards, including ISO 9001 tailored requirements and specific DLA packaging and inspection protocols. It mandates compliance with Qualified Products Lists (QPL) or Qualified Manufacturers Lists (QML) for components. Additionally, the contract is subject to stringent export controls under ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-controlled technical data training to access restricted information.

POSTED

DEADLINE

CGC RESOLUTE BRAND NAME DUPLEX STRAINERS

Solicitation # 52000QR260028133

The United States Coast Guard Surface Force Logistics Center is soliciting quotes for the procurement of two new 3-inch Bronze Duplex Flanged Sea Strainers, model 72-44F-SS1, for the CGC RESOLUTE. The required equipment must be 100 percent new, featuring Monel baskets with 1/32 inch perforations and 316 marine-grade stainless steel hardware, with a strict prohibition on cadmium plating. This is a total small business set-aside under NAICS 333998, and the resulting purchase order will be awarded on a firm-fixed price basis using simplified acquisition procedures. The items must be manufactured in the United States in compliance with the Buy American Act, and delivery is required FOB destination to Coast Guard Base Portsmouth, Virginia, no later than November 16, 2026. To be considered technically acceptable, offerors must provide a detailed cost breakdown, a formal Buy American Act compliance statement, and technical specification sheets. Additionally, the final delivery must include material test reports or certificates of conformance for the Monel and stainless steel components, as well as certified factory pressure test reports. Quotes are due by September 18, 2026, at 10:00 A.M. Eastern Standard Time.

Sflc Procurement Branch 1(00080)

POSTED

DEADLINE

43--FILTER ELEMENT,FLUID

Solicitation # SPE7M4-26-T-404Y

This solicitation, numbered SPE7M4-26-T-404Y, is issued by the Department of Defense Fluid Handling Division for the procurement of ten fluid filter elements, identified by NSN 4330-01-052-0080. The items are critical application components corresponding to Tate and Andale drawing G12379 Rev 2 and part number G12379-77REV3 for the Model 103BF duplex lube oil filtering assembly. This is a Women-Owned Small Business set-aside under NAICS code 333998, with a required delivery date of June 19, 2027, and a delivery timeframe of 283 days after order. The contract mandates strict adherence to DLA packaging requirements, MIL-STD-2073-1E, and MIL-STD-129 for marking. It includes specific technical requirements regarding the prohibition of intentionally added mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA. Compliance with Cybersecurity Maturity Model Certification CMMC Level 2 and the handling of covered defense information are required. Delivery is FOB Origin with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania.

FLUID HANDLING DIVISION

POSTED

DEADLINE

43--FILTER ELEMENT,FLUID

Solicitation # SPE7M1-26-T-348W

Solicitation SPE7M1-26-T-348W is a Request for Quotations issued by the DLA Land and Maritime Maritime Supply Chain on September 11, 2026, for the procurement of 345 fluid filter elements, identified by NSN 4330124176825. The procurement falls under NAICS code 333998 and requires quotes to be submitted electronically via the DIBBS system by the deadline of September 21, 2026. Delivery is expected within 133 days, with an original required delivery date of February 16, 2027, to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract is issued under the First Destination Transportation program and specifies FOB Origin shipping terms. The contract incorporates various federal and defense regulations, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 assessment requirements. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for shelf-life marking and hazardous material labeling per the Hazard Communication Standard. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. Payment and invoicing must be processed through the Wide Area WorkFlow system. Approved sources for this procurement include 974H3 5802033907 and 974H3 582033907.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

43--SEPARATOR,WATER,LIQUID

Solicitation # SPE7M1-26-T-348Y

Solicitation SPE7M1-26-T-348Y is a request for quotations issued by DLA Land and Maritime for the procurement of 943 units of liquid fuel water separators, identified by NSN 4330014246740 and part number 200257 from M. E. Industries, Inc. This item is designated as a critical application item. The procurement falls under NAICS code 333998 and requires electronic submission of quotes via the DIBBS system by September 21, 2026. Delivery is required within 317 days, with a need ship date of August 5, 2027, and a final required delivery date of August 13, 2027. Shipping is established as FOB Origin, with the destination for both inspection and acceptance being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract incorporates various federal regulations, including the Buy American Act, the Berry Amendment, and specific DFARS requirements for safeguarding covered defense information and the prohibition of hexavalent chromium. Packaging must adhere to MIL-STD-2073-1E and RP001, while marking must comply with MIL-STD-129. Invoicing and payment processing are to be handled electronically through Wide Area WorkFlow. Offerors are prohibited from using additive manufacturing processes unless specifically authorized. The procurement is managed by the Maritime Supply Chain office in Columbus, Ohio, with Michael Reese serving as the primary buyer.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Portable Centrifuge Lube Oil Purifiers

Solicitation # W3555-268893

The Department of National Defence is soliciting offers for the procurement of two new portable centrifuge lube oil purifiers for Fleet Maintenance Facility Cape Breton in Victoria, BC. These units are specifically required to remove water and particulate from emulsified and salt water contaminated R&O 77 steam turbine lubricating oil. The firm requirement must be delivered Duty Paid to CFB Esquimalt by June 17, 2027. Additionally, Canada retains irrevocable options to purchase up to two additional units for FMF Cape Breton and two for FMF Cape Scott in Halifax within 12 months of the contract award. The overall contract period extends from the date of award until December 22, 2027. Award selection is based on the lowest evaluated price among technically compliant offers. Mandatory technical criteria include compliance with the Canadian Electrical Code Part 1, the inclusion of emergency stops, and English labeling for all hazard areas. All equipment must be new and adhere to strict environmentally preferable packaging standards, requiring materials to be reusable, returnable, or recyclable. The contractor must also certify that the goods are not produced using forced labour. Payment for undisputed invoices will be made within 30 days of receipt.

Department of National Defence

POSTED

DEADLINE

Solicitation # TAMUS-ITB-26-0544

The Texas A&M University System is soliciting bids under solicitation number TAMUS-ITB-26-0544 for the purchase of 3D printers to be used for the Space Collaboration Facility project located in Houston, Texas. This procurement is classified under NAICS code 333998 and is being conducted as an Invitation for Bid. The solicitation was posted on September 10, 2026, with a response deadline of September 24, 2026, at 8:00 PM. All interested vendors must register and submit their bids electronically through the AggieBid portal, as the system will not accept submissions after the specified closing date. Sterling Crowdus serves as the primary point of contact for this effort. While specific evaluation factors and contract values are not detailed in the provided summaries, the procurement is managed by the Texas A&M University System as a state and local education agency.

Texas A&M University System

POSTED

DEADLINE

Supply of Volumetric Flasks (NSN 6640-01-386-4514)

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Fluid Filter Element Supplier (NSN 4330124176825)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Fluid Filter Elements (NSN 4330219146127)

NUCLEAR REACTOR PROGRAM

POSTED

2 days ago

DEADLINE

in 9 days

AI Contract Overview

This contract pertains to the procurement of ELECTRODE,WELDING with part number MIL-E-22200/10 TY MIL7018M-3/16 and cage code 81349, sourced exclusively from approved suppliers on the Qualified Parts Listing. The item must comply strictly with military specifications for material, design, and marking, adhering to MIL-STD-130 for mechanical parts, MIL-STD-1285 for electrical and electronic components, and other applicable standards. The contractor is responsible for all quality assurance, including internal inspections and documentation, with records required to be retained for 365 days after final delivery. Government inspection is mandatory under FAR 52.246-2, and the Government reserves the right to conduct additional inspections at any time. Configuration control follows MIL-STD-973, requiring formal submission of engineering change proposals, deviations, and waivers to the designated Contracting Officer. Packaging must conform to MIL-STD-2073 as specified in the schedule. The procurement is a total small business set-aside and subject to cybersecurity maturity model certification requirements, along with security prohibitions and exclusions as outlined in recent deviations through February 2026. A priority rating for national defense use is in effect, and the contractor must comply with all Federal Acquisition Regulation provisions related to inspection, delivery, and documentation. The RFQ closed on July 17, 2026, and all contractual documents are deemed issued upon electronic transmission or mail delivery. The point of contact for administrative matters is Joshua D. Martin, with invoice and payment instructions tied to the NAVICP-MECH office in Mechanicsburg, PA. The delivery timeline is unspecified but must align with the schedule, and all references to military standards are to be obtained through designated Department of Defense sources, adhering to access protocols for controlled and classified documents.

General Info

Small business set-aside contract for MIL-E-22200/10 welding electrodes, requiring strict military standards.

Agency

Department Of Defense → Navsup Weapon Systems Support MechView Agency

NAICS

333998 - All Other Miscellaneous General Purpose Machinery ManufacturingView NAICS

Place of Performance

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

1 update

PhaseClosed

PostedJun 10

Solicitation

Amendment 1Jul 2

Contract was updated

Response DeadlineJul 17

Deadline has passed

Submission Closed

07/17/2026, 08:30:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Contacts1 person available

OfficeMECHANICSBURG, PA, 17050-0788, USA

Organization / Agency

Department Of Defense → Navsup Weapon Systems Support Mech

View Agency Profile

Office AddressMECHANICSBURG, PA, 17050-0788, USA

Contacts

contact@example.gov

+1 (555) 000-0000

Full Description

CONTACT INFORMATION|4|N97113A|FA1|771-229-0509|JOSHUA.D.MARTIN76.CIV@US.NAVY.MIL| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| STOP-WORK ORDER (AUG 1989)|1|| GENERAL INFORMATION-FOB-DESTINATION|1|B| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|INVOICE AND RECEIVING REPORT (COMBO)|N/A|TBD|N00104|TBD|TBD|SEE SCHEDULE|TBD|N/A|N/A|TBD|N/A|N/A|N/A|N/A|JOSHUA.D.MARTIN76.CIV@US.NAVY.MIL| NOTE FOR CONTRACTOR/ADMINISTRATIVE CONTRACTING OFFICER|3|||| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|| QUALIFICATION REQUIREMENTS (DEV 2026-O0042)(FEB 2026)|2||| NOTICE OF CYBERSECURITY MATURITY MODEL CERTIFICATION LEVEL REQUIREMENTS (NOV 2025))|1|| NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (DEV 2026-O0037)(FEB 2026)|1|| SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026)|7|||||||| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026))|13|||||||||||||| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PERPARDENESS, AND ENRGY PROGAM USE (APRIL 2008))|2||X| RFQ closing date has been extended until COB, 17 JUL 2026. All contractual documents (i.e. contracts, purchase orders, task orders,delivery orders and modifications) related to the instant procurement areconsidered to be "issued" by the Government when copies are either depositedin the mail, transmitted by facsimile, or sent by other electronic commercemethods, such as email. The Government's acceptance of the contractor'sproposal constitutes bilateral agreement to "issue" contractual documents asdetailed herein. Part is on a Qualified Parts Listing (QPL). GOVERNMENT SOURCE INSPECTION per FAR 52.246-2 IS REQUIRED. DELIVERY_______________DAYS. All contractual documents (i.e. contracts, purchase orders, task orders,delivery orders and modifications) related to the instant procurement areconsidered to be "issued" by the Government when copies are either deposited in the mail, transmitted by facsimile, or sent by other electronic commercemethods, such as email. The Government's acceptance of the contractor'sproposal constitutes bilateral agreement to "issue" contractual documents asdetailed herein. 1. SCOPE 1.1 This contract/purchase order contains the requirements for manufacture of the ELECTRODE,WELDING . 2. APPLICABLE DOCUMENTS - NOT APPLICABLE 3. REQUIREMENTS 3.1 Manufacturing and Design - The ELECTRODE,WELDING furnished under this contract/purchase order shall meet the material and physical requirements as specified ;for P/N MIL-E-22200/10 TY MIL7018M-3/16 cage 81349; . 3.2 Marking - Unless marking requirements are specified by a document or drawing cited in this solicitation all items delivered under this contract/purchase order shall be marked and identified in accordance with the applicable Military Standards and Specifications as follows: Mechanical Parts, Assemblies and Equipments - MIL-STD-130 Electrical and Electronic Parts - MIL-STD-1285, Method 1. Electrical and Electronic Parts and Assemblies not covered by MIL-STD-1285-use MIL-STD-130. Electronic Equipment - MIL-STD-454 Requirement Number 67. Electrical Equipment - MIL-P-15024/5 (SHIPS) 3.3 Configuration Control - MIL-STD-973 entitled "Configuration Management", Paragraph 5.4.8, Configuration Control (Short Form Procedure), is hereby incorporated. The Contractor shall submit all Engineering Change Proposals in accordance with MIL-STD-973, Paragraph 5.4.8.2 and Appendix D. Requests for Deviations shall be processed in accordance with MIL-STD-973, Paragraph 5.4.8.3 and Appendix E. Requests for Waivers shall be processed in accordance with MIL-STD-973, Paragraph 5.4.8.4 and Appendix E. (Original and two copies shall be submitted to Contracting Officer, NAVICP-MECH, P. O. Box 2020, Mechanicsburg Pa. 17055-0788.) 4. QUALITY ASSURANCE 4.1 Responsibility for Inspection - Unless otherwise specified in the contract/purchase order, the Contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract/purchase order, the Contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. 4.2 Responsibility for Compliance - All items must meet all requirements of this contract/purchase order. The inspection set forth in this specification shall become a part of the Contractor's overall inspection system or quality program. The absence of any inspection requirements shall not relieve the Contractor of the responsibility of assuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract/purchase order. Sampling in quality conformance does not authorize submission of known defective material, either indicated or actual, not does it commit the Government to acceptance of defective material. 4.3 Records - Records of all inspection work by the Contractor shall be kept complete and available to the Government during the performance of contract/purchase order and for a period of 365 calendar days after final delivery of supplies. 5. PACKAGING 5.1 Preservation, Packaging, Packing and Marking - Preservation, Packaging, Packing and Marking shall be in accordance with the Contract/Purchase Order Schedule and as specified below. MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE 6. NOTES 6.1 Ordering Information for Document References - The Department of Defense Single Stock Point (DODSSP), Website http://www.dsp.dla.mil/, provides product information for the Department Of Defense Index Of Specifications and Standards (DODISS) (i.e.Military/Federal Specifications and Standards), Data Item Descriptions (DIDs), and other DODSSP Products. A. Availability of Cancelled Documents - The DODSSP offers cancelled documents that are required by private industry in fulfillment of contractual obligations in paper format. Documents can be requested by phoning the Subscription Services Desk. B. Commercial Specifications, Standards, and Descriptions - These specifications, standards and descriptions are not available from Government sources. They may be obtained from the publishers of the applicable societies. C. Ordnance Standards (OS), Weapons Specifications (WS), and NAVORD OSTD 600 Pages - These type publications may be obtained by submitting a request to: Commander, Indian Head Division, Naval Surface Warfare Center Code 8410P, 101 Strauss Avenue Indian Head, MD 20640-5035 D. On post-award actions, requests for "Official Use Only" and "NOFORN" (Not Releasable To Foreign Nationals) documents must identify the Government Contract Number, and must be submitted via the cognizant Defense Contract Management Command (DCMC) for certification of need for the document. On pre-award actions such requests must be submitted to the PCO for certification of need for the document. E. NOFORN Military Specifications and Standards (including Amendments, Change Notices and Supplements, but NOT interim Changes) to be ordered from: Contracting Officer NAVICP-MECH Code 87321 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 F. Nuclear Reactor Publications Assigned NAVSEA Documents and Identification Numbers (i.e. NAVSEA Welding Standard, NAVSEA 250-1500-1) are to be ordered from: Commanding Officer NAVICP-MECH Code 009 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 G. Technical Manuals Assigned NAVSEA Identification Numbers (i.e. NAVSEA Welding And Brazing Procedure, NAVSEA S9074-AQ-GIB-010/248) are to be ordered from: Naval Inventory Control Point Code 1 Support Branch 700 Robbins Avenue Phildelphia, Pa. 19111-5094 H. Interim Changes and Classified Specifications shall be obtained by submitting a request on DD Form 1425 to NAVICP-MECH. P/N: MIL-E-22200/10 TY MIL7018M-3/16 ITEM IS ON THE QUALIFIED PRODUCT LIST-PROCURE FROM ONLY APPROVED SOURCES LISTED cage 81349