Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

ELECTRODE, WELDING

Active
SPE8E6-26-T-4044Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Welding electrodes specified under part number H722844-RDP with a 0.125 inch diameter and straight round configuration are being procured under solicitation SPE8E6-26-T-4044, with NSN 3439-01-666-4749. A total of 63 purchasing groups, each containing 10 units, are required for delivery within 167 days of award. The product must be supplied by Hobart Bros as the sole approved vendor, and no substitutions are permitted. The contract incorporates technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the controlled revision determined by the solicitation issue date. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. The solicitation is classified under NAICS code 333992 and managed by the Department of Defense’s DDSP New Cumberland Facility with a response deadline of August 17, 2026. Covered defense information may apply, and there is no shelf life limitation for this item.

General Info

Hobart Bros to supply 630 units of 0.125-inch welding electrodes per NSN 3439-01-666-4749 by August 17, 2026, no substitutions allowed.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

333992 - Welding and Soldering Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E6-26-T-4044 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Brett Scull
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ELECTRODE,WELDING
ELECTRODE,WELDING
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CAGE: 28835 Hobart Bros PN: H722844-RDP 0.125" Diameter, Straight, Round
UI = PG = 10EA QUP = 001
WHEN THE PURCHASE ORDER TEXT (POT) DESCRIBES THE REQUIRED PRODUCT(S) BY
NAME AND PART NUMBER OF A SPECIFIC ENTITY, BY THE NAMES AND PART NUMBERS
OF A NUMBER OF SPECIFIC ENTITIES, OR BY THE NAME(S) AND PART NUMBER(S)
OF SPECIFIC ENTITY/ENTITIES AS MODIFIED BY ADDITIONAL REQUIREMENTS SET
FORTH IN THE POT, ONLY THAT/THOSE PRODUCT(S) HAVE BEEN DETERMINED TO
MEET THE NEEDS OF THE GOVERNMENT AND ARE ACCEPTABLE. SUCH PRODUCT(S) ARE
"EXACT PRODUCT(S)" AS DEFINED IN "DLAD 52.217-9002, CONDITIONS FOR NSN/Part Number: 3439-01-666-4749 Quantity: 63 PG Purchase Request: 7017757598QTY: 63 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333992
New
DIBBS
TORCH KIT, WELDING
Solicitation # SPE8E5-26-T-3823
The contract awards 10 kilotons of a welding torch kit with part number 951729 and NSN 3431-01-604-3846 under solicitation SPE8E5-26-T-3823, which is a total small business set-aside. The item must be delivered FOB origin within 167 days of contract award, with zero tolerance for quantity variance, and is subject to inspection and acceptance at the destination. All packaging must comply with ASTM D3951 and MIL-STD-129, with unit packing quantities specified per the contract, and the DLA Master List of Technical and Quality Requirements supersedes any conflicting standards. The delivery address is DDSP New Cumberland Facility, with final destination transportation governed by DLAD procedural notes C19 and C20. The required shipment date is February 1, 2027, though the original delivery deadline was January 9, 2027. Technical and quality requirements referenced by R or I numbers are incorporated via the DLA Master List, and the contract specifies the unit of issue and purchase unit as defined in official DoD documentation. The contracting office is the Department of Defense, and primary point of contact is Amanda Bird at the New Cumberland facility.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
FLUX
Solicitation # SPE8E5-26-T-3841
The contract pertains to the procurement of 10 units of FLUX with part number RPPEN2005N and NSN 3439-01-619-5990, supplied by two registered contractors, CAGE B5973 and CAGE 4QD64, with each unit measured as a single EA. The procurement is governed by DLA’s Master List of Technical and Quality Requirements, incorporating referenced technical and quality standards through R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition class. Packaging must comply with DLA’s official procurement packaging standards, and all non-accepted supplies must have government identification removed prior to return. The product has no shelf life restriction. The purchase order specifies that only the named part number as defined herein qualifies as an exact product meeting government needs. Delivery is required within 20 days of award to Fort Sill, Oklahoma, 73503-0000. The solicitation number is SPE8E5-26-T-3841, issued under NAICS code 333992 by the Defense Logistics Agency, with solicitations open from August 5 to August 17, 2026, and primary point of contact is Ira Hedgepeth at ira.hedgepeth@dla.mil or 445-737-8335.
Defense Logistics Agency

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
ELECTRODE, WELDING
Solicitation # SPE8E5-26-T-3795
The contract is for the procurement of welding electrodes under NSN 3439-01-039-3494, with a quantity of 198 cartons, issued through solicitation SPE8E5-26-T-3795 by the DLA San Joaquin office under the Department of Defense. The requirement is classified as fully competitive and governed by military or federal specifications, with technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, and the applicable revision is determined based on the solicitation issue date or award date depending on acquisition size. Packaging must comply with DLA requirements, and non-accepted supplies must have all government identification removed prior to return. No shelf life restrictions apply to the material. The delivery timeline is set at 157 days after order placement, with the solicitation posted on August 5, 2026, and responses due by August 17, 2026. The NAICS code 333992 indicates this falls under Other Fabricated Metal Product Manufacturing. Performance is to occur in Tracy, California, with a zip code of 95304-5000. Primary point of contact is Ira Hedgepeth, reachable via phone and email provided. The solicitation is published on the DIBBS platform, and no set-aside preferences are indicated, meaning the opportunity is open to all eligible vendors without restriction.
DLA DIST SAN JOAQUIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
SPECTRUM CASE
Solicitation # SPE8E5-26-T-3815
The contract solicitation involves the procurement of six SPECTRUM 875 Autoline Plasma Cutters with 50FT XT60 Torches, identified by part number 907584001 and NSN 3439-01-508-5924, each capable of cutting up to 7/8 inch mild steel and operating on a multi-voltage range of 208-575V 1/3PH. This is a critical application item where only the exact product specified by name and part number is acceptable under government procurement rules, and no substitutes are permitted. The requirement is under a Total Small Business Set-Aside, with a response deadline of August 17, 2026, and delivery expected within 167 days after award. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the specific revision in effect determined by the solicitation or award date depending on acquisition size. Packaging must conform to DLA standards, and government identification must be removed from non-accepted supplies. The solicitation, issued by the Department of Defense’s DDSP New Cumberland Facility, is managed under NAICS code 333992 and administered through the DIBBS system with primary point of contact Brandon Wicker.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
ELECTRODE, WELDING
Solicitation # SPE8E5-26-T-3782
The contract is for the procurement of 14 containers of welding electrodes, each container weighing 8 pounds, with a total quantity of 14 CO, as defined by the Department of Defense unit of issue. The item is identified by NSN 3439-00-878-2882 and must comply strictly with MIL-E-22200/4D and MIL-DTL-22200H technical specifications, class 1, 3/32 inch diameter, and must be manufactured by a supplier approved on the Qualified Products List at the time of award. The contract prohibits intentional addition of mercury or mercury-containing compounds in the product or its direct contact, except for specific exemptions such as batteries, fluorescent lamps, instruments, sensors, weapon systems, and NAVSEA-specified reagents, with portable mercury-containing devices requiring shock-proof construction and secondary containment as per NAVSEA 5100-003D. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must meet DLA packaging requirements. Delivery is due FOB origin within 167 days, with a firm contract delivery date of February 1, 2027, and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, with shipping instructions directing delivery to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract is subject to DLA Master List of Technical and Quality Requirements and applicable Covered Defense Information controls, and the supplier must adhere to all hazardous materials shipping protocols outlined in DLAD Proc Note C19 and C20.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
ROD, CUTTING
Solicitation # SPE8E5-26-T-3819
The contract specifies the procurement of 144 units of cutting rods identified by NSN 3433-01-519-7492 and part number 1418PC-SPS under solicitation SPE8E5-26-T-3819, with a total price of $144.00 per unit and a delivery deadline of 167 days from the order date, though the original required delivery date is January 13, 2027, and the needed ship date is February 1, 2027. All items must be delivered FOB origin, with zero variance allowed in quantity, inspected and accepted at the destination, and packaged in strict accordance with DLA’s Master List of Technical and Quality Requirements, which supersedes all other standards including ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, and if deemed hazardous under FED-STD-313, must follow TQ requirement IP025; otherwise, commercial packaging consistent with ASTM D3951 is acceptable. Palletization must adhere to RP001 DLA packaging requirements, and all units must be identified with correct U/I and QUP as defined in the contract. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, with transportation details governed by DLAD Proc Notes C19 and C20. The solicitation was posted August 5, 2026, with a response deadline of August 17, 2026, under NAICS code 333992, and the primary point of contact is Devin Duffy of the Department of Defense, DDSP New Cumberland Facility.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
ROD, WELDING
Solicitation # SPE8E5-26-T-3776
The contract pertains to the procurement of welding rods under NSN 3439-00-088-8988, with a specified unit of issue as a BX (10 pounds per box) and a total quantity of 75 BX. All materials must comply with qualified products list (QPL) requirements as defined by QPL-21562-44, Revision 44, dated January 25, 2011, and must be produced by manufacturers approved on the QPL at the time of contract award. The product must meet the technical and quality specifications outlined in MIL-DTL-21562F, Revision F, dated November 26, 2024, and all applicable requirements enumerated in the DLA Master List of Technical and Quality Requirements. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required in the sample unless otherwise authorized; attributes are classified with verification levels or AQLs based on criticality, and unspecified attributes are treated as major. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization must follow DLA packaging standards. The items are to be delivered FOB destination to the specified receival warehouse in Tracy, California, with a required delivery date of February 1, 2027, and no variance allowed in quantity. Inspection and acceptance occur at the destination, and all transportation and hazardous material handling must comply with DLA procedural notes. The solicitation number is SPE8E5-26-T-3776, issued on August 5, 2026, with bid responses due by August 17, 2026.
DLA DIST SAN JOAQUIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
TIP, CUTTING TORCH
Solicitation # SPE8E5-26-T-3803
The contract is for the procurement of 40 units of a cutting torch tip from Victor Equipment Co, identified by NSN 3433-01-190-2998 and part numbers 0323-0252 and 8-MFA, under solicitation SPE8E5-26-T-3803. Delivery is required within 167 days from the award date, with a final delivery deadline of February 1, 2027, and all items must be shipped FOB origin with no variance in quantity allowed. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific packaging codes, materials, and labeling as defined by DLA requirements. The items are to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation logistics follow DLA Procurement Notes C19 and C20. The contract incorporates DLA’s master list of technical and quality requirements, which governs compliance with specifications, and explicitly prohibits the intentional inclusion of mercury or mercury-containing compounds in the product, except for specified functional uses like batteries, sensors, or weapons systems, which must still meet NavSea 5100-003D containment standards. The unit of issue is each, with a unit price of $40.00, totaling $1,600.00. All technical data packages are not provided by DLA, and the contractor is responsible for meeting all performance, quality, and regulatory standards.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
SOLDERING IRON, ELEC
Solicitation # SPE8E5-26-T-3829
The contract is for the procurement of 94 units of a soldering iron, electric model with NSN 3439-01-653-2189 and part number WLIBAK8, supplied by Apex Tool Group, LLC under the solicitation SPE8E5-26-T-3829. The unit price is $94.00 per unit, with a total contract value of $8,836, and delivery is required within 167 days from the contract award date, with delivery terms set at FOB origin. The inspection and acceptance points are both at destination, and no quantity variance is permitted. All packaging and labeling must comply with MIL-STD-129 and DLA packaging requirements, and the material must be commercially packaged per ASTM D3951 unless classified hazardous under FED-STD-313, in which case TQ requirement IP025 applies. DLA Master List Technical and Quality Requirements supersede ASTM D3951 where applicable, and palletization must follow RP001 guidelines. The delivery destination is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with the required ship date set for February 1, 2027. Transportation instructions and parcel post details are specified under DLAD Proc Note C19 and C20. The contract is managed by the Department of Defense through the DDSP New Cumberland Facility, with primary point of contact Ira Hedgepeth.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
WELDING QUALIFICATI
Solicitation # SPE8E5-26-T-3848
This contract pertains to welding qualification requirements under solicitation SPE8E5-26-T-3848, issued by the Department of Defense through the DLA New Cumberland Facility. It specifies the delivery of 89 units of item NSN 3439-01-679-7019 with a delivery timeline of 167 days after contract award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date depending on acquisition size. The item is subject to export control regulations under ITAR or EAR, prohibiting unauthorized disclosure or transfer of technical data to foreign persons, including foreign nationals within the United States. Compliance requires contractors to hold a valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training, and pass the DLA Export-Controlled Technical Data Questionnaire. Additionally, the contract mandates adherence to DLA packaging standards and the removal of government identification from non-accepted supplies. Covered defense information is protected under applicable safeguards, and all technical data must be handled in accordance with DFARS 252.225-7048. The point of contact for inquiries is Brandon Wicker, with responses due by August 17, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
DESOLDERING BRAID
Solicitation # SPE8E5-26-T-3817
The contract pertains to the procurement of desoldering braid under solicitation SPE8E5-26-T-3817, with a total quantity of 1,035 spools, each containing five feet of material, resulting in a total length of 5,175 feet. The item is identified by NSN 3439-01-371-1588 and is supplied by Illinois Tool Works Inc. DBA 21267 under part number 10-5L. Delivery is required within ten days of the award, with FOB origin terms and no tolerance for quantity variance. Inspection and acceptance both occur at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, with specific adherence to TQ requirement IP025; if the material is non-hazardous per Fed-Std-313, it must be commercially packaged in accordance with ASTM D3951, though DLA requirements override any conflicting standards. All packaging and labeling must conform to MIL-STD-129, and palletization must follow RP001 packaging guidelines. The unit of issue is SP, with one spool equaling five feet, and the quantity per unit pack is specified as 1. The contract mandates compliance with all applicable DLA technical and quality standards, and requires the removal of government identification from non-accepted supplies. The required delivery date is December 4, 2026, but the need ship date is August 28, 2026. Transportation and shipping details are governed by DLAD Proc Notes C19 and C20, with all shipments directed to the specified facility address. The point of contact for inquiries is Ira Hedgepeth, and the solicitation was posted on August 5, 2026, with responses due by August 17, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
Supply of HOLDER, SOLDER AND WICK (NSN: 3439-01-390-9555)The contract requires the supply and delivery of four military-grade Holder, Solder and Wick components identified by NSN 3439-01-390-9555, all of which must fully comply with MIL-STD specifications to meet rigorous defense standards. Delivery must be completed within 20 days of contract award, emphasizing a tight and non-negotiable timeline critical for operational readiness. The solicitation, categorized as a subcontract under NAICS code 333992, is issued by the Defense Logistics Agency under the Department of Defense and was posted on August 4, 2026, with responses due by August 17, 2026. Although specific performance location and point of contact details are not provided, the procurement is managed through the DIBBS platform, indicating formal oversight by federal defense supply channels. All components are essential for maintenance and repair operations, and failure to meet the specified military standards or delivery deadline could result in rejection or penalties.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 332216
New
DIBBS
HEATING UNIT, INFRAR
Solicitation # SPE8E5-26-T-3844
The contract is for the procurement of four heating units, infrared type, under NSN 3439-01-436-9799, with a delivery requirement of 167 days after date of award. The solicitation number is SPE8E5-26-T-3844, issued on August 5, 2026, with responses due by August 17, 2026, and is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside provision. The procurement is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance specified at New Cumberland, Pennsylvania, zip code 17070-5002. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA packaging standards, and government identification must be removed from any non-accepted items. Only products explicitly named and identified by part number in the purchase order are considered acceptable, with no alternative substitutes permitted. The item has no shelf life limitation. Primary point of contact is Ira Hedgepeth, reachable via email and phone provided in the contract data.
Saw Blade and Handtool Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FILTER, AIR, ELECTROS
Solicitation # SPE8E8-26-T-5042
The contract is for the procurement of 29 units of AIR FILTER, ELECTROS with NSN 4460-01-692-2652 under solicitation SPE8E8-26-T-5042, issued as a total small business set-aside under NAICS code 333413. Delivery is required within 167 days of award, with shipments to be furnished FOB origin and inspected and accepted at destination, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation, wrapping, and marking requirements, with no special marking codes applied, and palletization must follow DLA packaging standards. The supplies are to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and the original delivery deadline was October 28, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date or award date controls depending on acquisition size. The contract incorporates provisions for potential coverage of covered defense information and requires adherence to DLA transportation and freight procedures. The point of contact for this procurement is Alexis Selby of the Department of Defense.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
GAGE, PROFILE
Solicitation # SPE8E5-26-T-3780
The contract pertains to the procurement of 12 GAGE, PROFILE units under solicitation SPE8E5-26-T-3780, with a response deadline of August 17, 2026, and a delivery requirement within 167 days after order. The item is identified by NSN 5220-00-446-8307 and is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Item Unique Identification (IUID) compliance is mandatory in accordance with MIL-STD-130 and the DFARS 252.211-7003 clause. The contractor must be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified through a qualified third-party assessment organization. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires prior government authorization. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of DOD export control training, and approval from the DLA controlling authority. The contracting office is the DLA New Cumberland Facility, with primary point of contact Khue Nguyen, and the place of performance is listed as New Cumberland, PA, 17070-5002. There is no shelf life requirement for this item.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 323117
New
DIBBS
MARKER, IDENTIFICATION
Solicitation # SPE8E6-26-T-4066
This contract pertains to the procurement of a Marker, Identification with NSN 7690-01-290-0175 and part number TKG0896-1, supplied by FRUEHAUF CORP, and is governed by stringent DLA packaging and quality requirements. The item is classified as a critical application item with a non-extendable Type I shelf life of 24 months, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, including the special marking code 32 for shelf-life identification. Packaging and palletization must adhere to DLA’s official procurement standards, and the item must be delivered FOB origin with no quantity variance allowed. Delivery is required within 36 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The unit of issue is PG, with a total quantity of 21 units, and the contract references technical and quality requirements from the DLA Master List, applicable as of the solicitation issue date. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the contract is issued under solicitation SPE8E6-26-T-4066 with a response deadline of August 17, 2026, and an original required delivery date of August 5, 2026.
Books Printing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
IMPELLER, FAN, AXIAL
Solicitation # SPE8E7-26-T-3511
The item sought is an axial fan impeller, identified by NSN 4140-01-561-8011, with a quantity of 21 units, required as a component of an Uninterruptible Power Supply within the Vestdavit RIB Davit System on LCS-1 vessels. Though the UPS is manufactured by GE INV, procurement must use Vestdavit’s part number 12271 through their government distributor, Scan Pacific Northwest LLC, with CAGE code 3ESE0. The solicitation, issued under contract number SPE8E7-26-T-3511, is governed by DLA packaging and technical quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. All supplies must comply with the requirement to remove government identification from non-accepted items. Delivery is due in 167 days after award, and the place of performance is New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The NAICS code 333414 applies, and the contracting office is the DLA New Cumberland Facility under the Department of Defense, with Kelly Mitchell listed as the primary point of contact.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 321114
New
DIBBS
CORROSION PREVENTIVE C
Solicitation # SPE8ES-26-T-2509
This contract solicits a corrosion preventive compound identified by NSN 8030-01-722-1433 and part number ETCPRTU-2B3C from Chemeon Surface Technology, LLC, with a quantity of 5 containers delivered FOB destination under solicitation SPE8ES-26-T-2509. The item is classified as a Type 2 (Code 6) shelf life item with a 24-month extendable shelf life, subject to specific packaging and marking requirements outlined in MIL-STD-2073-1E and MIL-STD-129, including the Special Marking Code 33 for Type II shelf life. Packaging must comply with DLA procurement standards and the Hazardous Materials Packaging, Marking, and Shipping requirements, with all hazardous material documentation—including Safety Data Sheets and labeled containers—aligned with OSHA’s revised Hazard Communication Standard (29 C.F.R. 1910.1200) effective June 1, 2015. Suppliers must submit SDS and compliant labels for approval prior to award and ensure employee training on the new standards. The item must be delivered within 173 days of contract award, with a required delivery date of October 15, 2026, and a need ship date of February 1, 2027. Delivery is to the DLA Distribution facility at New Cumberland, Pennsylvania, with a strict zero variance in quantity and inspection and acceptance occurring at the destination. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and the applicable revision depends on the solicitation or award date. All units of issue follow DoD authorized standards as aligned with ANSI X12.
Wood Preservation

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CASE, STORAGE AND TR
Solicitation # SPE8E6-26-T-4056
The contract pertains to the procurement of 35 units of a specific item identified by NSN 4240-01-654-9843 and part number 940210, with a unit price of $35.00, totaling $1,225.00. Delivery is required within 15 days of the contract award, FOB origin, with no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit containerization per DLA’s requirements. Marking must adhere to MIL-STD-129 with no special marking codes applied, and palletization must follow DLA’s packaging standards. The product must be shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLA procedural notes C19 and C20. The item is subject to Defense Logistics Agency packaging requirements and technical standards referenced in the DLA Master List of Technical and Quality Requirements. The contract incorporates cybersecurity requirements mandating a CMMC Level 2 self-assessment and applies to covered defense information. The solicitation number SPE8E6-26-T-4056 was issued with a response deadline of August 17, 2026, and an original delivery target of September 19, 2026. The need ship date is set for August 5, 2026, indicating the timing for readiness. Performance occurs at the DLA New Cumberland facility, and all technical and quality standards referenced are controlled by the DLA Master List revision in effect on the RFP issue date. Inspection and acceptance occur at the destination point, and the contractor must be prepared to remove any government identification from non-accepted supplies. The ordering activity is the Department of Defense, with primary point of contact John Lieb at DLA, and the North American Industry Classification System code is 339113.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-26-T-2502
The contract specifies the procurement of 3 cases of 50-milliliter adhesive units, part number DP-460 from 3M Company, identified by NSN 8040-01-642-2514, with each case containing twelve units. The product is amber and off-white in color and must comply with a non-extendable 24-month shelf life requirement for a Type I (Code M) item. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling indicating Type I shelf life, and palletization must follow DLA packaging standards. Delivery is FOB destination, with a required delivery date of January 25, 2027, and a lead time of 173 days, subject to zero variance in quantity. The adhesive is classified as a hazardous material, requiring full compliance with OSHA’s revised Hazard Communication Standard, including submission of Safety Data Sheets (SDS) and approved HCS or CPSA/FHSA-compliant labels prior to award, along with employee training on the new requirements. Storage must be maintained between 60-80°F (15-27°C) to preserve shelf life. Technical and quality requirements are governed by the DLA Master List, and the contract incorporates provisions for handling covered defense information. All deliveries must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania, and shipping logistics must follow DLAD procedural notes C19 and C20.
Adhesive Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336611
New
DIBBS
RAMP ASSY CORNER RH
Solicitation # SPE8E5-26-T-3818
This contract covers the procurement of 16 units of RAMP ASSY CORNER RH, identified by NSN 5440-01-553-0684 and part number 7017757152, under solicitation SPE8E5-26-T-3818. The item must be manufactured and delivered in strict compliance with technical specifications referenced from the DLA Master List of Technical and Quality Requirements, including welding and liquid penetrant nondestructive inspection standards per AWS D1.2. A certificate of conformance is required unless waived by a quality assurance letter of instruction, and all components must adhere to dimensional and assembly directives, particularly the prohibition against welding the strut base P12 to the gusset plate P18 as shown on the drawing; instead, P12 must be packaged separately with an instruction sheet included in each ramp assembly. The product must be packaged per ASTM D3951 and labeled in accordance with MIL-STD-129, with palletization following DLA packaging requirements, and all packaging marked with the specified unit of issue and quantity per unit pack. Mercury and mercury-containing compounds are strictly prohibited unless exceptions apply for batteries, instruments, or weapon systems, and must meet secondary containment and shock-proof standards per NAVSEA 5100-003D. The contract mandates full compliance with federal safety regulations, including the submission of Safety Data Sheets and Hazard Communication Standard labels updated to the Globally Harmonized System, effective June 1, 2015, with supplier employee training required on these changes. Delivery is FOB origin with inspection and acceptance occurring at destination, and must be completed within 167 days of contract award, with a required ship date of February 1, 2027, and original delivery deadline of October 24, 2027. No quantity variance is permitted, and all items must be shipped to the DDSP New Cumberland Facility in Pennsylvania. The solicitation is a total small business set-aside under NAICS code 336611, with drawings available via DIBBS during the open solicitation period. The contract incorporates FAR clauses for inspection, conformance, and standard requirements, and all documentation, including technical data packages and revisions referenced, must align with the specified drawing revisions and dated configurations.
Ship Building and Repairing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
LIGHT, COCKPIT, AIRCRAFT
Solicitation # SPE8E7-26-T-3487
This contract pertains to the procurement of aircraft cockpit lighting components under solicitation SPE8E7-26-T-3487, issued by the Department of Defense through the DDSP New Cumberland Facility. The item, identified by NSN 6220-01-563-8636 and part number 937-000-10M, is supplied by Luminator Holding L.P and Leonardo Spa Helicopters Division, with a total quantity of 13 units at a unit price of $13.00, resulting in a total contract value of $169.00. Delivery is required within 153 days from the contract date, with FOB origin terms, and inspection and acceptance occur at the destination. Packaging must comply with DLA Master List of Technical and Quality Requirements, particularly RP001 for packaging standards, MIL-STD-129 for marking and labeling, and either TQ requirement IP025 for hazardous materials per FED-STD-313 or ASTM D3951 for non-hazardous commercial packaging, with the DLA standards overriding ASTM where applicable. All packaging must reflect the specified Unit of Issue and Quantity per Unit Pack, and palletization must adhere strictly to DLA guidelines. The contract is a total small business set-aside under NAICS code 333515, with a response deadline of August 17, 2026, and was posted on August 5, 2026. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, with a required ship date of January 18, 2027, and an original delivery deadline of February 27, 2027. No quantity variance is permitted. Transportation instructions are governed by DLAD Proc Note C19 for general shipment and C20 for first destination handling. Documentation for source approval and handling of covered defense information is required as stipulated by RC001 and RD003. All technical and quality requirements referenced via R or I numbers in the DLA Master List take precedence over any other standards. The primary point of contact for the contract is Kelly Mitchell, reachable via email and phone provided.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
SHEETING, REFLECTIVE
Solicitation # SPE8E5-26-T-3781
Reflective sheeting meeting specification 3M ScotchLite 3271, 24 inches nominal width by 50 yards nominal length, is procured under contract SPE8E5-26-T-3781 with NSN 9390-00-501-5145 and part number 7000030797. The contract requires 14 rolls, each defined as one RO equal to 50 yards, with no variance allowed in quantity. Delivery is FOB origin and must be completed within 167 days of award, with the original required delivery date set for June 11, 2027, and a need ship date of February 1, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R- and I-numbers, which supersede industry standards such as ASTM D3951. Packaging must comply with DLA Packaging Requirements RP001 and MIL-STD-129 for marking and labeling, with hazardous material handled per Fed-Std-313 and TQ requirement IP025 if applicable, otherwise commercially packaged in accordance with ASTM D3951. Palletization must align with RP001, and all packaging must be labeled consistent with the specified Unit of Issue and Quantity per Unit Pack. Inspection and acceptance occur at destination. The delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation protocols are governed by DLAD Proc Notes C19 and C20. The solicitation was issued on August 5, 2026, with a response deadline of August 17, 2026, under the NAICS code 327999, and is managed by the Department of Defense through the DDSP New Cumberland Facility.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325510
New
DIBBS
SPECTRAL SELECTIVE COA
Solicitation # SPE8ES-26-T-2504
The contract calls for the delivery of Spectral Selective Coating in polyurethane form, specifically identified by NSN 8010-01-681-7475, with a total quantity of 16 boxes, each containing eight one-pint units. The coating must be dark gray, matching color chip number 36170, and packaged in accordance with DLA packaging requirements. Each unit package must include a MIL-STD-129 label featuring the lot or batch number. The product is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. Hazardous material provisions require submission of Safety Data Sheets compliant with 29 C.F.R. 1910.1200, as mandated by OSHA’s revised Hazard Communication Standard effective June 1, 2015, along with corresponding labels aligned with either the HCS or the Consumer Product Safety Act and Federal Hazardous Substance Act. Suppliers must also certify that employees have been trained on the new SDS formats, labeling standards, and regulatory requirements. Physical identification of the bare item must comply with RQ017, and all government identification must be removed from non-accepted supplies per RQ011. Delivery is due within 34 days after contract award, with the solicitation issued on August 5, 2026, and responses due by August 11, 2026. The contract is administered by the Department of Defense through the DDSP New Cumberland Facility, with point of contact Stephen Ockenhouse.
Paint and Coating Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details