This Government Contract opportunity from Department Of Defense was posted on May 7, 2021. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Electromagnetic Aircraft Launch System (EMALS) / Advanced Arresting Gear (AAG) System Product Support

Awarded

N00019-14-C-0037_P00062Federal

Submission Closed04/23/2021, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336413

New

DIBBS

Supply of Spacer, Sleeve (NSN 5365-01-034-2519)This subcontract, set aside for total small businesses under NAICS code 336413, involves the manufacture and delivery of 124,000 sleeve spacers, identified as NSN 5365-01-034-2519, for the Defense Logistics Agency Weapons Support ASC. The selected provider will supply these units to DLA Depots, ensuring all items are produced and delivered according to strict military and industry standards. Technical requirements include sampling per MIL-STD-1916 or ASQ H1331, packaging according to ASTM D3951 and RP001, and marking and labeling in compliance with MIL-STD-129. Additionally, the contractor must maintain CMMC Level 1 certification and adhere to all ITAR and EAR export control regulations to ensure the security and legality of the supply chain.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Antenna-430 ADF Repair and Overhaul ServicesThis subcontract involves providing repair and overhaul services for the Antenna-430 ADF, A1, supporting prime contractors on projects for the Department of Defense Navsup Weapon Systems Support. The scope of work includes the complete teardown, evaluation, and modification of units, where defective components are identified and replaced based on approved repair manual limits. All work must be performed using specialized avionics testing equipment and must strictly adhere to IPC/EIAJ-STD-001C soldering standards to ensure units are delivered in Ready for Issue condition. The opportunity is categorized under NAICS code 336413 and was posted on October 20, 2026, with a response deadline of November 19, 2026. This technical engagement focuses on maintaining critical aviation components to meet rigorous military specifications and operational readiness requirements.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aircraft Wheel Component SupplyThis subcontract, titled Aircraft Wheel Component Supply, involves providing replacement components, seals, and hardware to prime contractors supporting NAVSUP Weapon Systems Support aircraft wheel overhaul projects. The scope specifically focuses on delivering certified aircraft-grade replacement parts and aviation-grade alloys that meet approved repair manual specifications for NSN 1630-14-597-7780. Managed under the Department of Defense, the contract requires strict adherence to the Buy American Act and Trade Agreements certifications. Additionally, the supplier is responsible for providing Material Safety Data Sheets for any hazardous materials delivered. The solicitation was posted on October 20, 2026, with a response deadline of November 19, 2026, falling under NAICS code 336413.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aircraft Wheel Half Repair and Overhaul ServicesThis subcontract for Aircraft Wheel Half Repair and Overhaul Services supports NAVSUP Weapon Systems Support projects within the Department of Defense. The scope of work involves the comprehensive teardown, evaluation, repair, and overhaul of aircraft wheel halves under NSN 1630-14-597-7780. The selected provider will be responsible for disassembling units, cleaning and inspecting parts according to approved manuals, replacing defective components, and reassembling the units using specialized fixtures, jigs, and test equipment. All deliverables must be provided in Ready for Issue condition and must strictly comply with MIL-STD-130 and MIL-STD-129 standards. This opportunity falls under NAICS code 336413, with a response deadline set for November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Component Evaluation and InspectionThis subcontract, titled Component Evaluation and Inspection, is issued by the Navsup Weapon Systems Support under the Department of Defense. The project involves performing technical evaluations and inspections of spoiler assemblies for prime contractors working on Department of the Navy aerospace projects. The primary objective is to identify structural cracks, corrosion, or fatigue through the application of Non-Destructive Testing methods, specifically X-ray, Ultrasonic, and Dye Penetrant techniques. Qualified providers must hold ASNT or equivalent aerospace inspection certifications to ensure technical compliance. The final deliverable for this engagement is a detailed evaluation report that includes specific recommended repair actions. The solicitation was posted on October 20, 2026, with a response deadline of November 19, 2026, and falls under NAICS code 336413.

Navsup Weapon Systems Support

POSTED

DEADLINE

Spoiler Assembly Component SupplyThis subcontract, titled Spoiler Assembly Component Supply, is issued by Navsup Weapon Systems Support under the Department of Defense. The agreement focuses on the procurement of aerospace-grade replacement parts, fasteners, and sub-components necessary for the repair of NSN 1680-01-650-9016. The supplier is responsible for sourcing OEM or approved equivalent parts that match Reference Number 81205 113A4600-406 to support prime contractors on Department of the Navy aerospace repair projects. To ensure regulatory and origin compliance, the provider must furnish Buy American and Trade Agreements certifications. The contract falls under NAICS code 336413, with a posting date of October 20, 2026, and a response deadline of November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Spoiler Assembly Teardown and RepairThis subcontract, managed by Navsup Weapon Systems Support for the Department of Defense, involves the teardown, evaluation, and repair of NRP Spoiler Assemblies (NSN 1680-01-650-9016) for Department of the Navy aerospace projects. The selected contractor will be responsible for disassembling the units, conducting technical evaluations for wear and damage, and performing necessary repairs or modifications in strict accordance with OEM or military specifications. The work requires the use of precision measuring instruments and aerospace-grade tooling to ensure the delivery of certified, serviceable assemblies. Additionally, the contractor must possess CAV RP reporting capabilities to meet the administrative requirements of the project. The solicitation was posted on October 20, 2026, with a response deadline of November 19, 2026, under NAICS code 336413.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aircraft Skin Component Supplier (NSN 1560-01-723-6222)This subcontract involves the supply of aircraft skin components for prime contractors supporting US Navy NAVSUP Weapon Systems Support projects. The selected supplier is responsible for manufacturing or sourcing parts that strictly adhere to NSN 1RD 1560-01-723-6222 QF specifications. All deliverables must be packaged according to MIL-STD-2073 and marked in accordance with MIL-STD-129, with final delivery directed to shipping point W25G1U. To ensure quality and precision, the contractor must maintain ISO 9001 or SAE AS9100 certification. Additionally, all equipment used in the process must be calibrated to NCSL Z540.3 or ISO 10012 standards. This opportunity falls under NAICS code 336413 and requires responses to be submitted by November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Supply of Attitude Indicators (NSN 6610-01-432-3229)This subcontract, issued by the Department of Defense through the Pa DLA Aviation At Philadelphia, involves the supply of Attitude Indicators under NSN 6610-01-432-3229 for NAVAIR aviation component projects. The selected provider is responsible for manufacturing or procuring units that strictly adhere to TDP Version 003, ensuring that all hardware, software, and firmware are fully aligned with the established equipment baseline. The contractor must ensure all units are marked according to MIL-STD-130 and packaged in compliance with MIL-STD-2073. To qualify, the provider must maintain ISO 9001 certification and demonstrate compliance with DFARS 252.204-7012. The final deliverable consists of the physical indicator units, fully marked and packaged for delivery.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Fuel Relief Valve Teardown and RepairThis subcontract with Navsup Weapon Systems Support involves the teardown, evaluation, repair, and modification of Fuel Relief Valves under NSN 7RH 2915-01-201-6004 EK. The scope of work includes conducting wear analysis, implementing approved repair procedures, and performing necessary environmental and quality conformance testing to deliver a fully certified, repaired valve for US Navy aviation projects. The contractor must maintain ISO 9001 or SAE AS9100 certification and utilize measuring and test equipment calibrated to NCSL Z540.3 or ISO 10012 standards. This opportunity falls under NAICS code 336413, with a response deadline set for November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aviation Component Parts SupplierThis subcontract, managed by Navsup Weapon Systems Support under the Department of Defense, involves the supply of replacement parts, seals, and hardware for Air Pressure Regulators, specifically part number 166001039791. These components are intended for prime contractors working on Department of the Navy aviation projects. The supplier is required to provide OEM or approved equivalent aviation-grade seals and valves, ensuring all materials meet strict quality and origin standards. Key deliverables include the physical parts along with necessary quality certifications in compliance with Trade Agreements and hazardous materials modal regulations. The opportunity was posted on October 20, 2026, with a response deadline of November 20, 2026. The contract falls under NAICS code 336413, focusing on the specialized procurement of aviation component parts.

Navsup Weapon Systems Support

POSTED

DEADLINE

Flap Assembly Component FabricationThis subcontract for Flap Assembly Component Fabrication involves the production of precision-machined parts for prime contractors supporting Department of the Navy C130 aircraft projects. The scope of work includes the fabrication of structural ribs, hinges, and replacement brackets utilizing CNC machining and aerospace-grade alloys. To ensure quality and compliance, the provider must hold SAE AS9100 or ISO 9001 certification and deliver all components with full material and dimensional certifications. Managed by Navsup Weapon Systems Support under NAICS code 336413, the contract mandates strict adherence to DFARS 252.211-7003 for IUID marking and the provision of mill test reports. The solicitation was posted on October 20, 2026, with a response deadline of October 26, 2026.

Navsup Weapon Systems Support

POSTED

about 6 hours ago

DEADLINE

in 6 days

AI Contract Overview

The Naval Air Systems Command awarded a modification under contract N00019-14-C-0037 to General Atomics in San Diego, California, to implement Engineering Change Proposal ECP-I-AAG-0014, also known as the AAG Water Twister Mod II. This effort supports the Electromagnetic Aircraft Launch System and Advanced Arresting Gear for the USS Gerald R. Ford-Class aircraft carriers. The scope of work includes the provision of forward fit components, retrofit kits, and new complete end items, along with non-recurring engineering, integrated logistics support, prototype testing, computer software, and spare parts for near-term sustainment. General Atomics is also responsible for validation and verification of technical directives, manufacturing, acceptance tests, fielding support, and overall program, systems, and financial management. This contract was awarded as a sole-source procurement under the authority of Title 10, U.S.C. Section 2304(c)(1) and FAR 6.302-1, as General Atomics is the sole designer, developer, and manufacturer of the AAG system. The government determined that General Atomics possesses the unique technical expertise and requisite knowledge necessary to satisfy agency requirements, and that utilizing any other source would result in unacceptable delays. The associated justification and approval for this sole-source action remains valid through September 30, 2024.

General Info

Agency

Department Of Defense → Naval Air Systems Command

Contract Value

$92,704,761

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

San Diego, CA, USA

Set-Aside

NONE

Awardee

GENERAL ATOMICS San Diego CA USA

Award Issued Date

04/23/2021, 12:00:00 AM UTC

Documents

CJ&A 20-0107: AAG Water Twister Mod II Sole-Source Justification

justification-and-authorization

Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedMay 7

Award Notice

AwardedApr 23

Contract was awarded

Submission Closed

04/23/2021, 12:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Naval Air Systems Command

Contacts2 people available

OfficePATUXENT RIVER, MD, 20670-5000, USA

Organization / AgencyDepartment Of Defense → Naval Air Systems Command

Office AddressPATUXENT RIVER, MD, 20670-5000, USA

Contacts

Michele J. Estep

Shannon K Bromiley

Full Description

The Naval Air Systems Command (NAVAIR) awarded a modification under CVN-79 / CVN-80 Production Contract N00019-14-C-0037 to General Atomics (GA), San Diego, California (CA) to implement Engineering Change Proposal (ECP) ECP-I-AAG-0014 (AAG WT Mod II) for forward fit, retrofit kits and/or new complete end items, and the associated non-recurring engineering, integrated logistics support, validation and verification of technical directives and associated logistics impacts, prototype testing, test plans and reports, computer software, spare parts for near term sustainment, manufacturing and acceptance tests, and fielding support. GA will also provide related program management, systems engineering, and financial management functions. As the sole designer, developer and manufacturer of AAG. As such, GA is the only source with the requisite knowledge, experience, and technical expertise to provide the required supplies and services. The awarded Order is for the supplies and services for which the Government solicited and negotiated with only one source under the authority of Title 10, U.S.C. Section 2304(c)(1), as implemented by FAR 6.302-1, - Only one responsible source and no other supplies or services will satisfy agency requirements.